How to have column headings re-print on next page when printing?
When I make a document in Numbers '08, that requires more than one page, how do I get the column headings to print on the other pages?
I have looked at 'Print View', but cannot edit what I see. Please help!
I no longer use Numbers '08 but if I remember well, the soluce is to activate the "Show Print View" mode from the View icon available on the left edge of the toolbar.
It offer:
Show/Hide Print View
Show/Hide Layout
Show/Hide Rulers
Show/Hide Format Bar
Show/Hide Comments
Yvan KOENIG (from FRANCE samedi 4 juillet 2009 18:04:06)
Similar Messages
-
how do i change the orientation for documents in pages when printing double sided so that the document opens like a menu?
write now the document is printing so that when folded the interior of the menu is upside down.See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites -
How to have a text box expand to next page
I already got the text field to expand after i am able to type but when I go to preview the field does not flow to the next page. It hides behind the content I have on page two. How do I get the text field to push the content below it when it expands?
The main content area needs to be set to flowed.
If you want your content to push down as you enter text it needs to be a subform -
How to display column headings only once in each page with repeated blocks
Hi,
I have a report with 1 block on one column. The block has a table in it and will repeat in one page.
I need to display the column headers only in the beginning of each page. Can someone share your experience in implementing this ?
Thanks for your help.>
andyhchsu wrote:
> Hi,
> I mean in each block within section, I only need to display the table header once in each page.
> However if I check table header, it will display repeatedly. Any way to get around this ? Thx.
The trick I use to do that is turn off all the headers on the block (table and break) and put the header information in its own block above the section and set the new header block to repeat on each page. You just have to remember to resize the columns in the header block if you make changes to the column sizes in your data block. -
How can I save to the same map every time when printing pdfs?
How can I save to the same map every time when printing pdfs?
Finder points to the document map even when I chose a different map recently.
I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.that link seems to be broken right now:
403 Error - Forbidden - No cred, dude. -
How to avoid printing a blank page when there is 'no data' in the report.
how to avoid printing a blank page when there is 'no data' in the report.
try like this
if@section:IND=1
this template
end ifsectionbreak
if@section:IND=2
this template
end if -
How do I get the cells to show up darker when printing my document
When using Numbers, how do I get the cells to show up darker when printing my document?
Are you asking about the cell background, as ivmedic has assumed, or about how to make the grid lines separating the cells darker?
Select the table.
Use the controls shown above this table to change:
Stroke type from "Thin" to the solid line shown.
Stroke thickness to 1 pt
Stroke colour to a darker value (This is set to black, the rightmost cell in the top row of the Color Palette available fir this Color Well.)
the controls are toward the right end of the Format Bar.
Regards,
Barry -
How to have the format bar on top in pages
how to have the format bar on top in pages?
Do you mean Pages, the Word like application in iWork? If you do, I can ask the moderator move your thread to the Pages forum.
-
Table footer printed in next page without upper border line
Hi Experts
I am faceing a problem regarding printing of smartform. I have 2 tables under one LOOP control, TABLE2 and TABLE1 respectivelity. TABLE2 display the Header data and TABLE1 displays the Item data under Main window.
TABLE2 has no ROWs under table Footer section. TABLE1 has footer and I want to print the TABLE1 footer according to the page size, for that I have added a Folder under TABLE1 footer section and then create the line type under that Footer, also check the Page Protection check box. I manage to print the Footer in next page according to the page size but when the Footer goes to next page for printing the upper line border of Footer section is not dislayed.
Please give some tips or example, how to manage the Footer at print time.Hi,
Yes your problem is common because of two different line types while you are selecting the pattren the
pattern is assuming that the pattern is selected for the entire two line types.
solutions are
1). Use same line type for both footer and item
2). create a window with a template and copy the same for both the pages and put a check box
in the conditons of your window as only after end of main window.
3). Create windows with the lines you required with the postions(but not advisible because page numbers or line items lenghts are dynamic) .
Thanks,
Phani. -
Records print on next page in samrtforms
Hi all gurus and experts of sap ....
I had created P.O layout in smartforms .....when number of line items increased that time it breaks the page and footer area print on next page ....
kindly suggest me how to print remaining lines on next subsquent page not fooetr only but with whole page content....
thanx in advance i am in very crucial stage .....
plz give some examplesHi Ateeque,
Your problem is when 10 items are there 3 should print in the first page and remaining 7 items should print in the next page provided footers should display in their respective pages in the bottom.
If your requirement is correct as i specified above,
i like to know whether you have given the footer as a part of the main window or created a seperate window for the footer?
If you have created as part of your main window, can you please try it creating with a seperate window for the footer.
Thanks,
Karthik
Edited by: karthikeyan Thangavel on Feb 12, 2008 12:21 PM -
How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles panel because it's locked. I would also like to know how I should tag my cove content. I don't want the reader to get lost in content other than the body of the report, but I also don't want to ignore some content completely by tagging it as artifacts. What should I do y'all?
Thanks,
JoshHi Rob,
From the screen shots it looks like your script is not formatted properly (you may refer to 'Paladin Script' in 'Sample Project' to get an idea of how the script should be formatted.).
Further please follow the steps mentioned below to use Story to PP workflow.
Create a new Film script in Adobe Story
Create scene heading – INT. LOCATION – Day (these will show up in the outline view panel on left hand side)
Hit enter, hit TAB
Enter the name of the speaker, hit TAB or ENTER
Copy over the transcribed text
Build your script this way
Number scenes from the production menu
Export ASTX file for your script : File->Export->.astx
Open Premiere Pro
Create a new project, bring in media
In the project pane, find the "Scene" column
For the clip that contains the spoken text, assign the same scene number to the clip as you have in the story script (lets say both are scene 1)
Click out of the scene box in the project panel in Ppro
Right click on the scene that you just assigned a scene number to and select – attach Story script
Select the .astx fle you exported in step 8
Click ok
You should now see the script data in the metadata panel for the clip in the metadata panel.
You can now run speech to text based on "Embedded Script metadata" to time align spoken word to the script.
Let us know if this is helpful.
Thanks
Rashi - Story Team -
Header window tiotle not printing on next page
Hi !
I have aa form in which I have a header table created inside the main window to print the titles of the line items, unit , unti price , Qty and totals. The next page has the similar format with the headerr table inside the main window, but unfortunately the header titles from the header title prints on the first page and when there are more items and the items are carried over to next page the titles dosent print on next page. Could nayone please tell me why the titles wouldnt be printing on the next page when the format is the same on teh next page also and it does have the texts to print there . Only the items are printing and not its titles.
Thanks,Hi!
Thanks for your reply. We are anyways getting the header in the first page its that I am not getting the header titles on second page and folowing pages only. I do have a next page in my smartforms and as per teh design both the pages has the header wondow but still it dosent print on second page but prints on first page. What I ahve done is created an extra window on my next page and created temp[late under that with the header titles and this prints it oin the second page now.
Thanks -
Printer Settings dialog missing when printing to another Mac with Bonjour
I want Photoshop to manage my color settings rather than my Epson 4800 or Epson SPRX 580 printers, so in the print dialog box I select the "Printer Color Management" tab and set color adjustments to the OFF position. This works fine as long as the printer is connected directly to my MacBook or my MacBook Pro. But if I try to send a job on my MacBook Pro via bonjour to either of the printers when it is connected to my MacBook, the print dialog is missing the choices of "Printer Color Management", "Printer Settings", etc.
All that is available are things like "Layout, Cover Page, Scheduler, Summary." The "Printer Settings, Color Management" options only show up on either computer when connected directly to the printer.
Is there a way to get those other choices (Printer Settings, Color Management) when printing over a bonjour network?
I'm on Mac OS 10.5.6 on the MacBook Pro and Mac OS 10.4.10 on the MacBook. I have downloaded all the driver updates from Epson and deleted and added the printers again with the same result.HP must have release a driver update because we no longer encounter the problem.
-
How can I set up my iphone as a pager when my sound is cut off?
How can I set up my iphone as a pager when my sound is cut off?
Nbt24vs wrote:
I had a droid before that I used as a pager. I found an app that would allow me to tell my phone even if its in silence mode if I got a text from "??" whatever then beep/sound off anyway. Since there are so many more apps in the Apple world I cant beive there isnt an equivalant app.
When the sound is muted, all notifications are muted. Because of the greater inherent security in iOS than Android, an app such as you describe is not possible. There are no apps that can selectively override the mute. App developers do not have access to those system functions. -
I have a faded streak down middle of page when copying, scanning, faxing only
When I copy or scan a document the copy or scanned page comes out with a faded streak verically down the middle of the page. the faded area is approx 2 3/4 inches wide. I can print from the computer fine, no streak appears on the printed copy. This only happens in copy, scan and probably faxing. I've done all troubleshooting for scanning, faxing and copying for this type of all in one printer. Any suggestions.
Hi , Welcome to the HP Forums! I understand that you have a faded streak down middle of page when copying, scanning, faxing only, on your HP Officejet Pro 8620. I am happy to look into this for you! Please, try the troubleshooting steps within this quality guide, Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans, and let me know what happens! Hope this resolves your issue! “Please click the Thumbs up icon below to thank me for responding.”
Maybe you are looking for
-
My iPhone will not connect to the internet properly. It says that it is connected, the App Store won't load apps and I can't get on my face book app. I have tried wifi and my cellular data, neither work. What are some ways to fix this?
-
OIM 11g High Availability Deployment
Hi Experts, I'm deploying OIM 11g in High Available schema, following Oracle docs: http://download.oracle.com/docs/cd/E14571_01/core.1111/e10106/imha.htm#CDEFECJF, I have succesfully installed and configured OIM & SOA in weblogic domain on 'OIMHOST1'
-
Repairing Disk Permissions is stuck on "Reading Permissions Database"
Ever since I installed Leopard awhile ago I have not been able to repair my disk permissions. The Disk Utility progress bar stays on the spinning stripes indicating it is "Reading Permissions Database". I've been canceling out of it and just forgoing
-
IOS 6 now can't get past Terms and Conditions
I downloaded ios 6 for my iphone 4, it had an error and deleted everything on my iphone. I reloaded all my music, apps, etc. but my contacts were also deleted. I tried Verizon ZV Contact Transfer which apparently needed an update to work. I tried to
-
Please help...every time I click help icon in my blackberry pearl unable to view >>Error starting net_rim_bb_hel p:Module'net_rim_ecmas cript' not found..... and also the picture every time I view the picture unable to display file /media Card/Blackb