How to have jtextfield focus enabled after window loading

Hi
Can I know how a JTextField can have cursor in it after the window it consists is loaded?
Tried using the requestFocus(), but it did not work even after
isFocusable() returned true.
Could I get a whole piece of working code if possible, to see what interfaces my class should implement and what methods have to be overridden.
More:
I have a JTextArea(not editable) , JTextField and a JButton in the frame.
Thanks
Reddy

hi try this code
import javax.swing.*;
public class exam1 extends JFrame
     public exam1()
          setSize(450,500);
          JTextField tx1= new JTextField(15);
          tx1.requestFocus();
          JPanel pnl= new JPanel();
          pnl.add(tx1);
          getContentPane().add(pnl);
     public static void main(String arg[])
          exam1 ex = new exam1();
          ex.setVisible(true);
          //ex.show();
}Cheers
jofin

Similar Messages

  • GTX670 - Signal lost/black screen after windows loading icon

    Hello,
    I hope I am posting this in the correct forum area.  If not I do apologize.
    Here are my specs:
    Board: MSI Z97-G45 Gaming
    Bios: ?? whatever pre-installed on mobo
    VGA:   MSI GTX670 OC
    PSU:   Corsair HX750 750W
    Intel Core i7-4790K
    MEM: 12 GB Kingston HyperX DDR3 1600 2x 4GB, 2x 2GB sticks
    HDD: SSD Kingston 120 GB (Win7), HDD 1 TB WD 7200 RPM (Win7), HDD 1.5 TB WD 7200 RPM (storage)
    COOLER: Corsair Hydro Series H60 Water Cooler
    OC: no overclocking done by me..default settings
    OS: Windows 7 64bit Professional
    So to keep this as direct and as short as humanly possible here is my situation.
    Had a gtx670 card that I had to send back to MSI under RMA.  They sent me what looks like a new gtx670 card (no dust) that I received yesterday (4 Aug).  Last night I removed temporary old card (9800gt) and plugged in new 670gtx.  Things seemed to be ok, reinstalled driver after card was recognized.  Played one round of Battlefield 4 for testing purposes and all seemed good.
    Upon exiting the game things went south in a hurry.  Moving the mouse cursor around was extremely slow and choppy.  Mouse clicks were not recognized.  I could not bring up ctrl-alt-del to get to task manager.  At this point the cursor turned to spinning circle as if things were happening.  However, after 5+ minutes of nothing changing I did a hard boot.
    Restarted and after the windows loading screen the signal appeared to be lost to the monitor and I was left with black screen.  This was with the SSD.  I then attempted to load into the HDD windows OS that I hadn't logged into yet with this card and was greeted with the same issue.
    I can load into Safe Mode with no issues.  In safe mode I removed all nvidia drivers and was then able to load into windows normally using basic windows vga drivers.  The moment I load the Nvidia drivers and restart the computer I then have the issue again.  This happens with both drives.
    I have reset the video card in the PCI-Ex16 slot and still received the problem.  I have tried a different PCI-Ex16 slot and still had the issue.  I put the old 9800gt card back in and windows loaded perfectly and without issues on both drives.  I put the 670gt in and try to load into normal windows and I lose signal and get black screen after the windows loading screen.
    I'm at a loss at the moment.  I think it's the drivers, but could it be the card?
    Doing some research I've come across some people saying there may be issues with the nvidia HD audio drivers that are installed with the video drivers.  Could it be as simple as uninstalling or unchecking that particular driver?

    Flashed the BIOS last night to the latest version and attempted to launch windows with the GTX670 card.  I still experienced the same issue where as soon as windows finishes it's loading animation (with Nvidia drivers) and it goes to the login screen, the monitors cut out.
    At this point I feel like it has to be the card.  The moment I install the video drivers and restart, I have the problem of losing the signal/black screen.
    What I have done:
    1) Completely wiped any/all video related drivers from the computer and started from scratch. No success.
    2) Ran Memtestx86 to see if it's a problem with my memory sticks. No problems found.
    3) Put the card in a different PCI-Ex16 slot to see if there was a problem with the slot. No success.
    4) Flash updated the BIOS on the motherboard to the latest version. No success.
    I have a dual boot computer with Windows 7 64-bit installed on an SSD and a HDD.  The problem happens on both drives.  Yet, the moment I install my old 9800GT the problem disappears and I can login to Windows just fine.
    I will be sending the card back today on another RMA.

  • How to remove boot camp partion after windows has been deleted

    I have removed windows 7 from my mac book air. however the partition will not be deleted... how can I remove the partition.

    Hi,
    Usually the correct way to remove your Windows partition is to use the BootCamp Assistant again which should give you the option to remove the made Windows partition and revert back to one OSX volume.
    After that's done a reboot of your Mac might be advisable. After the reboot use the BootCamp Assistant again to make the Windows partition and then install the (hopefully correct) version of Windows.
    Only if that's not working (whatever the reason) :
    1) boot your Mac from your OSX install DVD
    2) choose your language and then 'ignore' (cancel) the installation
    3) from the Top Menu (Utilities) start Disk Utility (DU)
    4) in DU click on your harddisk (not any partition) in the left pane (the first item listed)
    5) in the right pane use the 'Partition'-Tab
    6) click to highlight on the ex-Windows partition you want to delete
    7) click on the small '-' Button at the bottom
    That should delete your former Windows partition
    After that's done successfully
    8) Drag the partition separator line until it encompasses the entire drive and then select apply.
    9) Quit Disk Utility
    10) reboot your Mac from your harddisk.
    Since you are 'fumbling' with your OSX partition you should consider having/making a backup of it before trying the a.m. procedure. Just in case.
    Regards
    Stefan

  • How do I get BlueTooth enabled on Windows again?

    I've dealt with this before--this is my third time (at least) instatlling a fresh copy of Windows 7 Ultimate via Bootcamp.
    Basically I did all the normal steps: used Boot Camp Assistant to convert my Win7 iso into a WININSTALL thumbdrive, installed windows. Then I put the special apple utilities or whatever (the middle option in Boot Camp Assistant) and went and installed all those on Windows.
    Now everything is pretty much working except BlueTooth. It simply isn't showing up in my taskbar or in my Control Panel.
    Yes, I've already done the Device Manager -> Network Adapters -> Broadcom 802.11n Network Adapter -> Properties -> Advanced -> BlueTooth Collaboration -> Enable thing and that didn't change anything for me. My computer still thinks I don't have any bluetooth dongles or devices.
    I'm on a mid 2012 MBA and I know it has bluetooth because 1) I've used it on the mac side of things and 2) I've used it on Windows previously.
    I also remember having to jump through hoops when I wanted to initially activate it on Windows but I can't remember how I did that.... which is why I'm asking here.
    (Clarification: Most people having BT issues seem to just not have great quality. I'm not getting BT AT ALL, as if it's not even attached to my system.)

    Update: I forgot something about the way BootCamp installs Windows...
    I had temporarily turned off BlueTooth on OS X because I didn't need it, and when you do that, it effectively removes it from the system's list of devices.
    So I just wiped the Windows partition, turned BT back on in OS X, and re-installed Windows. Just to make sure, I went through and manually installed all the drivers by hand and then let the BootCamp utility install them as well, and it's been working like a charm!

  • How do I bring "focus" to a window?

    I'm trying to improve my workflow in FCP and sometimes find myself a bit frustrated.
    For example, when I am in the Viewer window fiddling with filter parameters, I want to suddenly switch down to the Sequence in the Timeline window.
    On a PC I would press ALT-TAB, or TAB to cycle through the windows. But in FCP I have to leave the keyboard and pick up my mouse then click in the Timeline window.
    It slows me down a bit.
    Is there any shortcut like TAB in Windows that allows me to change window focus?
    Thanks,,

    when you say in point in the timeline, are you talking about the beginning of the clip on the sequence? Or do you have an in point set in the timeline. If you are just talking about being at the absolute beginning of ANY clip in the timeline, and you don't want to scrub the mouse and snap, just press the up arrow key. That will go backward one edit point. Down arrow will go forward one edit point. Clip beginnings and ends are all edit points, and this works on all tracks. So if you want to stay in one track, solo it.

  • How to have the focus right?

    Hey there,
    I have a JFormattedTextfield and two buttons below that. Each Button has another calculation function. The first button is the most used one.
    By starting the programm the focus is at the textfield, so that the user can enter numbers without struggling with the mouse. Now the user should press enter to fire the first button's function. How can I do this? At the moment the program does nothing by pressing enter.
    Thanks alot!
    SA.

    add an action listener to the field that you talk about, for example:
    txtNumber.addActionListener(
         new ActionListener() {
               public void actionPerformed( ActionEvent e ) {
                      // do some functionality
    );that way, you will register you text field to listen for enter action.
    jotnarta
    Message was edited by:
    jotnarta

  • How to have Itunes auto Sync after the podcast auto download? (for iphone 3gs- but I think it can be iphones in general)

    I want to have itunes download the podcast first and then sync to my iphone automatically. It is in the reversed order, so I have to manual sync again after the auto downloads. How can I do this? Thank you

    Contact the seller because the iPhone seems to be not unlocked. Only
    the Carrier to which the iPhone is locked can unlock it. If it is an AT&T
    iPhone, return it or sell it because AT&T will not unlock for anyone
    for any reason.

  • How to recover licence of PS12 after Windows 8.1 crashed? Unable to uninstall PS12.

    I cannot uninstall PS12 because Windows 8.1 on my home PC crashed and everything has to be freshly installed on a new hard drive. How can I save my licence??

    Quote from: BlueAlexFPS;55815
    Here is the FAQ and what users might have these issues at below link:
    http://event.msi.com/2013/win8-1/faq.html
    I followed these instructions to the letter. Updated to the latest 8.1 drivers in the MSI global site.  Power Boost and Dragoon Gaming Center threw application exceptions along with other issues.  I did a factory reset back to windows 8, updated to the latest 8.0 drivers in the MSI global site and no issues so far.
    So whether it be in 8.1 itself or drivers it would appear that there are some compatibility issues with at least some notebooks,  Mine is a GT70 Dragon Edition 2.  Support did not recommend going to 8.1 since mine was factory installed with Windows 8 (but I am sure their stance on all notebooks is not change the OS from what it is shipped with)

  • How to have SAP password sync with Windows AD password

    Hi All,
    Can someone guide me with the setup required to have the SAP password to be in sync with the Windows Active Directory password?
    Thanks
    Vijay

    Hello Vijay,
    UME means  User Management Engine which provides central user administration for all
    Java applications. The UME is  used as the default user store as of SAP Web Application
    Server 6.40. The UME is integrated into SAP Web Application Server Java as a service.
    The UME itself administers users and uses databases, directory services, or the
    SAP ABAP user administration to store the data. With newer versions of SAP Web Application
    Server, the UME is set as the default user store.
    SAP recommends that, as of SAP Web Application Server Java
    6.40, you use the UME, which is preconfigured by default during the
    installation, as the user store.
    The UME has its own user management administration console for
    administering users. It allows  to perform the routine tasks
    of user administration, such as creating users and groups, role assignment,
    and other actions.
    The UME provides different self-service scenarios that can be used by
    applications. For example, a user can change his or her data, or register as a
    new user.
    Security settings can be used to define minimum
    password length and the number of incorrect logon attempts before a user is
    locked etc
    The UME logs  unsuccessful logons,incorrect logon attempts,changes to user data etc
    Hope this satisfies your querry to some extent.
    Pl dont forget to award points if resolved.
    Regards

  • How to have the OS open every window every time in List View?

    I tend to work in List View all the time with my windows. However when I do, for example, a search it opens in what ever View but not List View. If I than close that window, without putting it on List View, the next one opens in the same setting as the one I closed (annoying to me to say the least).
    Is it possible to set things up so it always and for ever opens in List View?
    Ta.

    Malcolm Rayfield wrote:
    Select a window, set it to List view then select "Show View Options" in Finder's "View" menu. Enable "Always open in list view" then click the "Use as Defaults" button.
    I had been trying that. First apologies, I made a mistake upstairs in the title I meant *"Column View"* sorry, grovel, grovel.
    However in list view I cannot click "Use as Defaults" as it is grayed out and in "Column View" it does not even show up.

  • How can I deactivate Creative Cloud after windows crashed?

    Good morning everyone,
    Ive following issue that my Second PC crashed and Windows restored itself. Unfortunately it deleted half of the creative cloud programms. My issue is now that i cant reeinstall Photoshop and Aftereffects because it always says that all license are already in use. So is there any way to delet ore log myself off a license without the program beeing installed anymore.
    I would be realy thankfull for any help.
    Cheers
    Forster F

    Hi Forster,
    Welcome to Adobe Forum,
    The CC has been activated twice, so please perform the steps as mentioned earlier, when you will launch & try to sign in after install, it will ask you to deactivate from previous machine.
    There will be an option to deactivate it from there also, if your previous machine are un accessible then you can choose the option to deactivate from here & henceforth it will allow to sign in & activate.
    Please let us know if it worked.
    Regards,
    Rajshree

  • How to update "Encrypt with UserKey" after Windows User Profile replacement?

    A problem with my User Profile required that the files be backed up, the profile deleted, a new profile created and my files restored. I have several SSIS projects built in Visual Studio 2012 that use "EncryptSensitiveWithUserKey". I assume the
    "UserKey" is based on the SID or GUID of my User Profile. Now when I open these projects I get the Warning:
    Warning 2 Warning loading SSISProject.dtproj: Warning: Failed to decrypt sensitive data in project with a user key. You may not be the user who encrypted this project, or you are not using the same machine that was used to save the project. If the sensitive data is a parameter value, the value may be required to run the package on the Integration Services server. SSISProject.dtproj 0 0
    Is there a way to reset the UserKey in an existing project to the key for my new Profile? Is the value derived and used for encryption stored in the .dtproj file? If so can I copy that value from a new SSIS project into the .dtproj file for my old projects?
    There has to be some way to "transfer ownership" of an SSIS project.
     

    There has to be some way to transfer "ownership" of SSIS projects between developers. Forget about my specific case of my profile being recreated. Let's say I built this SSIS project and was required to use Encrypt with UserKey. I leave
    the company. They ask another developer to make changes to the project. My old "ownership" of the project should be somehow transferable to the new developer. It shouldn't be tied to my ID (which no longer exists at the company) in perpetuity. Microsoft
    has to have some way to transfer "ownership" of SSIS Projects with "Encrypt with UserKey". It's such a common use case I can't believe they wouldn't provide for it.
    No, there is no way . This option is the default and it is actually the worst option precisely because it is useless in team development environment. Use
    EncryptSensitiveWithPassword option just like Arthur suggested and you should be fine.
    SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

  • How to have a transparent background after saving as a jpeg?

    Hi guys!
    I designed this logo for a couple that are starting their own business. Problem is they never told me that they wanted to print the logo into T-shirt that are a Daisy yellow color. As of now we are trying to find the HTML code for the yellow in the shirts so I can match the background of the logo to the shirt because the problem they are having is that when they print the logo on the shirt it comes out squared and the logo in the middle. The logo its self its oval shaped. As an alternative and probably easier way to solve the problem I'm trying to send them just the logo shape but I've trimmed the excess background to a point where it cannot be trimmed anymore and there still is a white background to it, Probably my explanation its a bit confusing but ultimately I'm trying just to send them the logo with no white background at all. I need help with that. How to save the file and send it so they can open it still with no background color?
    Please help me ASAP!!!
    THANKS
    CAGE Graphics

    JPG files are not compatible with transparency.  You need to save as GIF or PNG, but make sure the unwanted area shows as the checkerboard in Photoshop before saving.
    It is always a good idea to ask the printer what works best for them.  I suspect there would be specific requirements for printing on material, but we don't know if this going to be screen print, or iron on or what. 

  • How do you uncheck the "enable integrated windows authentication" in Mozilla Firefox?

    Every time i want to access a site mozilla uses the windowslogin to authenticate through proxy.

    Hope it helps:
    http://markmonica.com/2007/11/20/firefox-and-integrated-windows-authentication/

  • How to activate PS Elements 10 after windows 7 reinstall

    Stupid activation software thinks I am trying to run elements on more than 2 computers.

    You need to contact support directly for activation/deactivation and other installation issues. It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. You will need your serial number.
    To get help now click here for product support

Maybe you are looking for

  • Still i can't copy a film from my windows pc to IP5.

    still i can't copy a film from my windows pc to IP5.already sinc with i tunes.there is no option shows how to import the video's.

  • Disabling Isolation Mode in CS3

    Is this possible? I skipped over CS2 (I guess this "feature" was introduced in CS2?) only to discover that Illustrator CS3 goes 31 flavors of wacky whenever I try to update text objects using the group select (filled arrow) pointer... I guess it's no

  • Capacity Planning for External Procurement Material

    Hi, I have the following requirements. MRP Scheduling is getting executed material level (material no, plant) with scheduling type 2 which means lead time scheduling using MD02 Transaction Code. This is works fine for the Inhouse Product. In order to

  • GR Error - Excise invoice itmes are of diff. register type

    Hi, Excise invoice has two mat. type items... ROH and capital goods and hence the error is reflecting........ GR Error - Excise invoice items are of diff. register type... How to handle this scenario.........invoice no. is same ........ we have split

  • 10.4.6, airport & macsense aerocard extreme WPE-800

    We have been using a Macsense AeroCard extreme since Nov 05. We have airport extreme and haven't had any problems until today. We installed 10.4.6 this morning and now the aerocard extreme won't power on and airport shows up as off. This card is prac