How To Hide A Field While Creating PO.

Hi,
Please Give me the solution of my problem. As I want that NoBody Could Change The Description of the related Material code which comes under Text Field Both while creating/changing PO.

Hi,
Try to maintain PO master data.
1. Go to tcode SM31, table view V_162, choose Maintain.
2. Select ME21N --> Detail.
3. In the field selection group --> choose Basic data, item
4. Line item Material Description --> tick Display instead of Opt entry
5. Choose Back button, again, then Save
You should have your Short text field in ME21N as display only, once you have enter the Material.
Hope this help.
regards,
rob

Similar Messages

Hiding Reference Fields While creating Customer Master

Hi,
I want to Hide Reference fields While creating customer master, Thanks in advance
Thanks
seshu

Hello,
No need of screen exits or ABAPer.
You can easily do it with Transaction Variant using T-Code - SHD0 (SHD zero).
If you dont know how to create a Transaction Variant, just search the forum with Date Range "All" & you will get lot of guidence.
You will just need help of Basis person for removing end-user's authorization for XD01 & giving authorization for (e.g.) ZXD01
Hope this helps.
Thanks,
Jignesh Mehta

How to hide document fields in Bid Invitation

While creating Bid invitation I need to hide some fields e.g. Attachements, upload a document, description, button Search & Add. These fields are available under tab Header data -> Documents.
BADI 'BBP_UI_CONTROL_BADI' works to hide Bid Invitation Basic data, but not for above.
Can anybody let me know how to hide above fields.
Nilesh Kumar

Hi,
I dont think there is any BADI/screen variant for this requirement.But yes,if any of the 2 are available in the std,ITS template changes should be avoided.
The foll are the screen variants available in SRM 5.0:
Item data overview in the invoice without purchase order reference: Screen variant BBP_IV_NON_PO; Method GET_SCREENVARIANT_INV
Item data overview in the invoice with purchase order reference: Screen variant BBP_IV, Method GET_SCREENVARIANT_INV
Item data overview in the confirmation: Screen variant BBP_CF; Method GET_SCREENVARIANT_CONF
Item data overview in the confirmation for time recording: Screen variant BBP_CF_TIMEREC; Method GET_SCREENVARIANT_CONF
Item data overview in the purchase order: Screen variant BBP_PO; Method GET_SCREENVARIANT_PO
Item data overview for contracts: Screen variant BBP_CTR_ITEMLIST; Method GET_SCREENVARIANT_CTR
Item data overview for selection of contracts: Screen variant BBP_CTR_ITEM_SELLIST; Method GET_SCREENVARIANT_CTR
Search results for changing/processing a purchase order: Screen variant BBP_SEARCH_PO_IN_PO; Method GET_SCREENVARIANT_SEARCH
Search results for entering an invoice and/or confirmation: Screen variant BBP_SEARCH_PO; Method GET_SCREENVARIANT_SEARCH
Search results for entering a purchase order: Screen variant BBP_SEARCH_SC; Method GET_SCREENVARIANT_SEARCH
Search results for displaying/processing a bid invitation: Screen variant BBP_SEARCH_BID; Method GET_SCREENVARIANT_SEARCH
Search results for displaying/processing a bid: Screen variant BBP_SEARCH_QUOT; Method GET_SCREENVARIANT_SEARCH
Search results for displaying/processing an auction: Screen variant BBP_SEARCH_AUC; Method GET_SCREENVARIANT_SEARCH
Search results for displaying/processing an invoice: Screen variant BBP_CHANGE_IV; Method GET_SCREENVARIANT_SEARCH
Search results for displaying/processing a confirmation: Screen variant BBP_CHANGE_CF; Method GET_SCREENVARIANT_SEARCH
Search results for entering/displaying/processing/status of a shopping cart: Screen variant BBP_SC; Method GET_SCREENVARIANT_SC
Worklist for Sourcing: Screen variant BBP_SOCO_WL; Method GET_SCREENVARIANT_SOCO
Work area in Sourcing: Screen variant BBP_SOCO_GA; Method GET_SCREENVARIANT_SOCO
Overview for the budget display: Screen variant BBP_BUDGET; Method GET_SCREENVARIANT_BUDGET
BR,
Disha.

How to hide the field from the view in the webdynpro application?

Hi Gurus,
I got a requirement where in which ,default layout has the field name Time.......To......... which is (2 input box ) and one lable assigned to the container.........
Now my requirement is to hide this field from the layout for all cases of leave......(all types of leave)....
I got a few inputs from forum that we can achieve this by implementing the following steps..........
Create In context => Value attribute => Say Visibility
Go to its properties
Select com.sap.ide.webdynpro.uielementdefinitions.Visibility
In View Layout
Select UI Element Set Visible property to this context variable Visibility.
In wdDoModifyView() You can set this property to false
wdContext.currentContextElement().setVisibility(false);
Can you people tell me where to create the value attribute........
In the view context or in the component context...........
and field that am talking about is assign to the container you want me to assign this context variable property to all ......Like to input box ,label and the container..........
Please calrify this ASAP...........
Thanks in Advance,
Dharani

Hi Manoj......
Hi Murutuza,
As per your guidelines I have created the value attribute in View context (which has the field..... which needs to be hide)inside the value node say FieldVisibility.......and attribute name OldTimeDuration......and I set this value with uidefeneitions Visibility .......
and I bind this vaule with the field property visible(Time.......To..........)which I need to hide...........
Now in the view implementation tab ..........I have coded in the doinit method(since my requirement to hide the field from the layout in all cases).........
wdContext.currentFieldVisibilityElement().setOldTimeDuration(WDVisibility.NONE);
But if I deploy the application and see still am getting the same field dispalying in the screen.........
I even tried putting this code in wdmodifyview method.........same results........
Kindly tell me how to hide the field permenantly from the screen............(without any conditions.)
Thanks in Advance,
Dharani

How i hide a field of a custom view in OAF 11

Hi, im a new developer of OAF11.
What should I do, to customize the Purchase Order screen, if then the requirement is to hide the field that i insert from extended VO.
What I did was modify the XML of the page to add the field and then extended the original AM.
I added the extended view into the custom AM to prevent that fail with the field that i insert.
I must clarify that I modify the path of AM default for the path of the custom AM in the XML, then i upload the XML with the command import, and i see it the field in the page.
I tried to hide another field that i created by customizing the page, but I couldnt do. That´s why i insert directly the field in the XML original.
I Try to customize the driver involved with the page, but nothing happened.
First try it on the controller Father and after the son.
The page is in the POS module (iSupplier), and is POSVIEWPOG (PO Details).
The code that attempts to hide the field is:
OAApplicationModule am = paramOAPageContext.getApplicationModule(paramOAWebBean);
OAViewObject oaviewobject1 =(OAViewObject)am.findViewObject("PosViewHeadersVO");
if (oaviewobject1 != null)
OARow row = (OARow)oaviewobject1.getCurrentRow();
String vCustomType = (String)row.getAttribute("TypeName");
if (vCustomType.equals("Blanket Agreement"))
OAMessageStyledTextBean vHideField = (OAMessageStyledTextBean)paramOAWebBean.findChildRecursive("drbQuantity");
vHideField.setRendered(true);
else
OAMessageStyledTextBean vHideField = (OAMessageStyledTextBean)paramOAWebBean.findChildRecursive("drbQuantity");
vHideField.setRendered(true);
Can anyone help me?
If im grong other solution that i think is:
How I can put a field on a page with code and how to hide the field with conditions?, consider that the field is from the VO extended.
Thanks!!!

Hi Yichao,
Chk these links
https://help.sap.com/saphelp_nw04/helpdata/en/5a/0c889a4d5911d2a5fb0000e82deaaa/content.htm
http://help.sap.com/saphelp_45b/helpdata/en/cf/21ec5d446011d189700000e8322d00/frameset.htm
thanks and regards
srikanth.p

How to hide a field from table maintenance view?

Hi,
How to hide a field from table maintenance view?
The field is used for data created date. I need to hide it from display.
Thanks

Chk this link.
http://help.sap.com/saphelp_nw04/helpdata/en/66/33f52010dd11d6999300508b5d5211/frameset.htm
Maintenance Attributes
You can assign a maintenance attribute P to individual fields in the maintenance view definition in the Dictionary (SE11). It can be H (hidden)
H (hidden)
A field flagged H is not displayed on the screen. This field must also be filled in the background by a routine at an event.
The system writes R and H fields to the database like all other fields when a new data record is saved.

How to hide input fields on selection screen using variant attribute

Hello all,
I want to know how to hide input fields on selection screen using variant attribute conpletely.
As you know, when setting the attribute of variant "Hide field" checked, the field is temporarily hidden, but when clicking "All Selections(F7)" button on the selection screen, the fileds become appeared.
I want to hide the field completely. Di you know how to do ?
Thank you for your support.
Regards,
Hideki Kozai

Use this attribute hide field and save the variant. Then create transaction for this program setting default variant for parameter Start with variant . The user who runs it will have it by defualt set.
Otherwise
in PBO simply use LOOP at screen and output = 0 for this field. This will ensure that field is invisible in any case.
Regards
Marcin

Mandatory fields while creating masters in SAP B1

Hi All
can some body tell if is there any manual where i get to know the mandatory fields while creating the masters in SAP B1 9.0
Thanks
Nidhi Trivedi

Hi Nidhi.
In Standard you can make UDF mandatory while Creating it by Checking Mandatory Option in UDF Window.
If you want to make Standard Field Mandatory then you have to use SP Transaction Notification to make that field Mandatory.
For other options, Please check below links.
Mandatory Fields in 60 seconds - YouTube
how to make a field mandatory in SAP Business one ?
Making Fields Mandatory
Mandatory Field Options in SAP Business One- no programming required! | Frontline Consultancy
Hope this helps
Regards::::
Atul Chakraborty

"How to pass classification characteristics while creating batch" ?

Hi,
    I am using FM's BAPI_BATCH_CREATE/CHANGE while creating/changing batch I have to maintain classification data aswell.But in FM docu i saw as shown below
1.Create the classification of a batch in the background (object characteristics only)
2. If the batch is to be classified, you must specify a class in the BatchControlFields parameter. Only single classification is possible.
According to above statments I have passed class name in Batch Control Fields but I am unable to find " How to pass classification characteristics while creating batch". Please tell me how to pass classification characteristics in background?
Edited by: Vijay Babu Dudla on Dec 16, 2008 3:24 AM

Hi, You can update classification for a batch using the following code.
But first, you'll need to find out that the batch management is cross-plant or plant dependant.
If it is cross plant then plant(WERKS) is not part of the key to BAPI_OBJCL_CONCATENATEKEY.
CLEAR: objectkey, objectkeytable, objectkeytable[],
           allocvaluesnumnew, allocvaluesnumnew[],
           return.
    objectkeytable-key_field = 'MATNR'.
    objectkeytable-value_int = matnr.
    APPEND objectkeytable.
    objectkeytable-key_field = 'CHARG'.
    objectkeytable-value_int = charg.
    APPEND objectkeytable.
* Only if Batch management is Plant dependant
    objectkeytable-key_field = 'WERKS'.
    objectkeytable-value_int = werks.
    APPEND objectkeytable.
    CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
      EXPORTING
        objecttable    = objecttable
      IMPORTING
        objectkey_conc = objectkey
      TABLES
        objectkeytable = objectkeytable
        return         = return.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from ="characteristic value goes here".
    APPEND allocvaluesnumnew.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from = "characteristic value goes here".
    APPEND allocvaluesnumnew.
    CALL FUNCTION 'BAPI_OBJCL_CHANGE'
      EXPORTING
        objectkey                = objectkey
        objecttable              = 'MCHA' " MCH1 in case of cross-plant batch management
        classnum                 = classnum " Classification class number, as used in MSC2N
        classtype                = classtype " Classification class type, as used in MSC2N
*   STATUS                   = '1'
*   STANDARDCLASS            = STANDARDCLASS
*   CHANGENUMBER             = CHANGENUMBER
*   KEYDATE                  = SY-DATUM
*   NO_DEFAULT_VALUES        = ' '
* IMPORTING
*   CLASSIF_STATUS           = CLASSIF_STATUS
      TABLES
        allocvaluesnumnew        = allocvaluesnumnew
        allocvaluescharnew       = allocvaluescharnew
        allocvaluescurrnew       = allocvaluescurrnew
        return                   = return
* Do not forget to commit, otherwise changes would not take effect.
commit work.
Regards,
Hashir Ahmed

Display of Profit Center field while creating asset in AS01

Dear Experts,
I have a requirement of displaying profit center field while creating asset in AS01. Currently there is no option of profit center in AS01. My client uses the profit center reporting, so they want to assign a profit center at the time of creation of asset in AS01.
Is this possible to display profit center field in AS01, or else any other option to tackle this issue.
Regards,
Juned

Hi,
You can only have COST CENTER in asset master, but not profit center.
You have to maintain the respective PC in cost center master data only.
If Cost Cetner field is also not in AS01, then you need to activate it first.
SPRO->FA->AA->Integration with GL->Additional Account Assignment Objects->Activate Account Assignment Objects.
Here you need to activate COST CENTER field. Now you will be able to change the field status of cost center field in screen layout for asset master data as REQUIRED field. and SAVE
Then in AS01 you can enter COST CENTER
Regards,
Srinu

Pan number compulsory field while creating vendor code

is it possible to make pan number compulsory field while creating vendor code

Dear Sanjeev
you can make PAN number mandatory use t.code shd0 in that first give transaction code than give screen variant detail for screen variant program go to xk01 and then go to pan field here click on f1 then click on technical specification u can copy the program and screen name after that click on create tab the xk01 screen field comes again go to pan field double click on that field and then select this as required field and save . then go to transaction variants give the transaction name and add a row in which insert row and gives screen variant , program and screen then save it now move to standard variant give your screen variant name and activate now your pan field is mandatory . if you have any problem in understanding i can provide you the screen shot also on your mail. provide your email id
Award points .
Regards

How to give network path while creating oracle directory.

I have created
CREATE OR REPLACE DIRECTORY TESTDIR AS '\\168.176.33.117\TESTDIR';
but through this path i m not able to create text file.
create or replace procedure WriteTest is
f utl_file.file_type;
s varchar2(200) := 'this is some info';
begin
f := utl_file.fopen('TEST2DIR','sample2.txt','W');
utl_file.put_line(f,s);
utl_file.fclose(f);
end WriteTest;
Help how to give network path while creating oracle directory.
--when i give local machine path then it will create at local machine where oracle is installed. but not able to create at other machine.
Zakir

Well for starters your directory object is called TESTDIR and in your fopen statement you are referring to TEST2DIR.
On top of that I'm not sure oracle is happy to refer to network locations. I think you have to map it to a regular drive mapping (shared directory) type path. Can't say I've every tried to do it though.

How to hide mandatory field in OAF page through personalization

Hi,
Could u please help, that how to hide mandatory field in seeded page.
This could be achieved through personalization only.
Thanks,
Ramachandra.
Edited by: 927747 on Jun 21, 2012 2:16 AM

yes you can hide that field by simply set the render propert to "false" using the personalization.
Regards,
Vijay Reddy.

Subject field while creating the change request

Hi All
I want to populate the subject field in the change request by default.

Hi
The automatic population of the subject field while creating the CR through folloup transaction from Support message.
Regards
Kumar

How to add image file while creating addon...pathsetup?

Hi friends,
i have a problem while creating addon.
while creating addon we can add all the files(.vb,xml).but if i add image files(.bmp,.jpg)they are not displayed in runtime.
--how to add image file while creating addon..?
we are useing SAP Business One 2005A(6.80.317)SP:01 PL:04

Somebody knows like I can indicate to him to a button that I have in a form, that accedes to the image in the route where will settle addon? I have this, but it does not work to me
oButton.Image = IO.Directory.GetParent(Application.StartupPath).ToString & "\CFL.BMP"

How To Hide A Field While Creating PO.

Similar Messages

Maybe you are looking for