How to hide a single value node hierarchy in the query designer

Hi,
I would like to perform a calculation in the infocube. It concern a count "Nb of different customers" with the following hierarchy : Country / region / City.
This KF would be read at the same time by city, region and country, and certain customers exist in 2 different region, and I have to count them only once by country.
To do this, I added a new record (at the country level when loading infocube) to deduct a number of customers in doubloons.
This line added contain only a country code and the number of cutomers in doubloons (- 23 when I have 23 cutomers in doublons) with revrese sign.
Now, I would like to use this value (-23) to have a right Nb of different customers by country, without showing the not assigned line in the report hierarchy.
How can I hide, in the query designer or the WAD, a single value node from hierarchy (NOT assigned) but take in account the value (-23) at the country level ?
Is there another solution (more simple) to perform this in the infocube ?
For information,
1) The infocube is loaded once per month, and the KF (Nb of different customers" is also performed by month.
2) I can't perform this in the report (performance problem with calculated KF).
thx.

Hi,
the short answer is "you can't", the longer is: The ADF Faces tree component is stamped for better performance. This stamping means that nodes are not rendered as JSF objects but copies of an existing component (just with a changed value). For this reason the nodes don't issue their own query for data and thus cannot be refreshed individually
Frank

Similar Messages

'Display as hierarchy' in the Query Designer

Hi,
Can anyone highlight some points or importance of 'display as hierarchy' in either rows or columns in the query designer. Also could someone put some thoughts on the 'new structure' in the query designer, is it just that we can create some new selection and new formula from the structure or is there any other explanation for its existence. Any kind of explanation would be greatly appreciated.
Thanks,
Anjali.

Hi Anjali,
display as Hierarchies:
simply enables you to select and use hierarchies for that InfoObject if available.
Structures:
you can create structures with or without keyfigures. Structures give you a great deal of flexibility and consistancy in your reports. Eg. you can create a structure that gives you a drilldown on char selections that are different for each line or column. We use that to "simulate" divisions in a drilldown that we don't have backed up by masterdata.
Also structures enable you to keep reports consistant by using the same global structure eg. for all Contribution margin reports
Hope that helped,
regards,
michael

0 down vote favorite share [fb] share [tw] How to hide cut/copy/paste/Replace- menu on the UIWebView when it is being displayed over the keyboard. Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text b

How to hide cut/copy/paste/Replace… menu on the UIWebView when it is being displayed over the keyboard.
Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text box it shows the keyboard. Now If user tap and hold on text box it shows a popup menu. Now while keyboard and pop up are being displayed user scrolls the view. At this time it shows pop up over the keyboard which I need to hide.
I tried setMenuVisible of UIMenuController when popup rect and keyboard rect intersects each other on viewDidScroll but it didn't help me.
Any clues will help a lot.
Thanks.

You are more likely to get an answer if you post programming problems to the Developer forum. This forum is intended for normal user level problems.

Restrict the values in the Query Designer

Hi Gurus,
I want to Restrict PLANT or SALES ORG values in the Query Designer, in the Query, PLANT has selected in the rows and having variable and SALES ORG is display attribute of the PLANT. In this scenario How can we Restrict the values?
Thanks in Advance,
Ravi.

Hi Ravi,
You cannot restrict values on the display attributes. Better change it to navigational attribute and check the box as navigational in the cube.
Regards
Ram

Keyfigure value by comparing 2 date fields, in the query designer.

Hi all,
Could any one please intimate, how to display the key figure result with the comparison of 2 date fields.
We are having "Completed Date" say(CDATE) and "Deadline Date"(DDATE) values in the report as time characteristics, dervied from the CRM system.
Now we need to compare the values as:
CDATE <= DDATE, then only consider this under "Meeting Planned Date"(Key Figure).
Could you please intimate, how to display the key figure value, by using the code at the query designer level.
Thanks & Regards,
A.V.N.Rao

Hi Rao,
Simple create two formula variables with replacement path from these two date fileds,then create a formula then do the comparison
Eg:
ZVAR_CDATE WITH REPLACEMENT PATH PROCESSING TYPE REPLACED WITH OBJ CDATE
ZVAR_DDATE WITH REPLACEMENT PATH PROCESSING TYPE REPLACED WITH OBJ DDATE
CREATE A FORMULA FORMULA1: IN THE FORMULA BUILDER AREA DO THE COMPARISON.
Thanks & Regards
Ramsthota

Hi , How to make a calculated kf as local in the query definition

Hi ,
How to make a calculated kf as local in the query definition
Regards,
Ravi.

Hi,
Calculate KF consists of Basic, restrict and other calculated kFs stored in Metadata repository.
Calculate KF is a replicate of Formula and acts as Global.
Calculate KF acts as Global--you can use Globally.
Formula as Local--you can use as local to Query.
you can create the Calculate KF as follow:
Goto Query Designer>Open/Create Query>Select Key Figures Mode on left side of Query>Select that KF node> right click Select Calculate Keyfigure.
then one popup window dispays, so you make the calculations based on Basic KF, Restirct Kf and Formule. then save it.
Regards,
Suman.

How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413 Header Length too Large?

How to sort out error downloading perpetual license of the CS6 Design Standard for MAC: JRun Servlet Error 413 Header Length too Large?
Just bought the perpetual license online - student-teacher version. Received email confirming my eligibility and followed all instructions to a 't', but still got this 413 error message, and cannot continue.
Would anyone be able to help me?
Or how can I get in touch with Adobe themselves?
How do you get to the chat? I bought it with their help, but cannot remember how to get there again. Took me ages to find the chat.
Cheers!!! Thanks a million! Any help is welcome!!!!

Make sure you have cookies enabled and clear your browser's cache before you try downloading. If it continues to present that error try using a different browser.
As far as getting to a chat link goes, it can be hit or miss... Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

How can i reuse a structure in the query designer in 3.5

Hi all,
we are using the version BW 3.5, now how can i reuse a structure made int he query designer, because i need it in another query, i did the structure and put it a technical name and save, help guys

HI Richard,
Create a Structure in Rows/columns and save As it, then in the left Panel of the Query Designer you can see three Folders
1) Structures
2) Keyfigures
3) Dimensions
then Expand the structures Folder, there you can find your saved structure, Structures are 2 types
1) With Key figures
2) Without Key Figures
If you have the key figures in your saved structure, then you can find it in the subfolder of with Keyfigures, else in the other folder.
Now you can use this structure by draging in all the queries which are on the same InfoProvider (CUbe. MultiProvider)
Regards
ReddY A

How to hide dynamic parameters values in the URL with Reports 6i

Hi,
I want to know a way of hiding the parameters values when asking for a report through the web.
Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameters DESTYPE = cache and DESFORMAT = pdf, it is fully generated and in the Address or Location box of the browser, you can see http://webserver/cache/report.pdf (where cache is the virtual directory defined in the OWAS in which the .pdfs are cached). So, users cant see the Url used to generate the report.
Im trying to upgrade this configuration to Reports 6i with Cgi in a web server. I generate reports with no problems. The problem I have is I cant find how to hide the parameters values as before. I mean, when I ask for a report, once its generated I can see http://webserver/cgi-bin/rwcgi60.exe?server=ServerName&report=report.rdf&userid=user/pass@connection&destype=cache&desformat=pdf&P1=value1&P2=value2 in the Location box. It allows user to ask for another report changing the values of the parameters. I use these parameters to execute some query written in the Data Model. For example, imagine that the P1 represents the company id, the user (that is supposed to see only data of its company) can change this id, ask for a new report and see data of another company.
Ive already tried to use the key mapping option, but its not useful to me because the parameters values are dynamic and its impossible to define different entries in the cgicmd.dat for each possible value. The option of loading the parameter form before running a report is not useful to me either, because there exists specific screens for this purpose.
Is there any solution?
Thank you.
Marma Bonfiglio.

Hi Rakesh,
I am using BI 7.0
The last option I have is 'Hide' for 'Calculate single values as' .
I have the below options for 'Calculate single values as'
1. Normalise according to Next group level Resul.
2. Normalize according to Overall Result
3. Rank number
4.Olympic Rank Number
5.Maximum
6. Minimum
7.Counter for all detailed values
8.Counter for all detailed values that are non zero
9.Moving average
10.Moving average That is Not zero ,null or Error
11. Hide.
So could you please tell me where i can find 'suppress result' option for the keyfigure .
Many thanks

How to hide a single tab in tabcontrol

Hi, I want to hide a single tab on a multi-tab tabcontrol based on login. If the particular bit is set, show 1st and 3rd and so on. I just gone through help files.I couldn't find any.
Raj.
Solved!
Go to Solution.

EightBit wrote:
How did you make the page property with "PageVis." I create a property node but then can only link to things in Pane, aka I can't find how to link to Page
8bit, you should be aware you replied to a 4 yeaar old solved thread (Not the best way to attract attention- next time feel fre to start a new thread)
Try this:
A Tab is a container for "Pages" the Pages each have a "Page.visible" property. since the pages are in the tab container you cant access there properties directly from the "Pane"
Jeff

How to select all single values in the header area

Dear Experts
I got a request that the user wants to select a single value or all single values in the header area. E.g. if the values from characteristic master data are A, B, C and D, the selection can be one of these values or all of them. With the standard BPS configuration, due to the unique combination in the header area, selection of 'All' single values is not possible. Is there a way to select all single values in the header area?
Thanks, Jessica

Hi Jessica,
Here is a solution where you need not to change your planning layout or to create a new variable or any exit function.
Step 1 - Maintain master data value 'ALL' in the required characteristic.
Step 2 - Create a copy function to copy all the required data records to 'ALL'. you can use standard copy function where you have to include only this characteristic in the fields to be change.
Copy -
From = all values (A,B,C,D etc)
To = "ALL".
Step 3 - Call this function on layout opening. you can include it in the planning folder and change the function attribute to call it on layout opening.
Step 4 - Create a standard Delete function. you have to call this function on save operation. In this function, you have to delete all data records present in the buffer where required char contains 'ALL' value.
This approach can impact the performance of the planning application. It depends on the number of data records you are dealing with. Standard Copy and Delete functions are pretty fast in nature.
I hope it will help you. please let me know if you need more inputs.
Regards
Tarun

How can I compare single value with multiple value...

Hello,
I want to compare one value with multiple values, how can it possible ?
Here in attachment I tried to design same logic but I got problem that when I entered value in y that is compared with only minimum value of x, I don't want that I want to compare y value with all the x value and then if y is less then x while loop should be stop.
I want to do so because in my program some time I didn't get result what I want, for example x values is 4,5,6,7,8 and y value is suppose 6 then while loop should be stop but here it consider only minimum number and its 4 here so while loop is not stop even y is less then 7 and 8. So I want to compare y value with all the entered values of x and if y is less then any of x values then while loop should be stop and led should be ON.
Please guide me how can I do so.....
Solved!
Go to Solution.
Attachments:
COMPARISON.vi ‏8 KB

AnkitRamani wrote:
Thank you very mach for your help..
may be i have solved this ....i have made one change in my vi that instead of min. i select max and max. value is compare with the value of y and then if y is less then the max. while loop will be stop other wise its run continuously.
this is working fine...
any ways thanks again for your help and time...
I have to agree with Lewis - his way is more efficient.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How to store a single value embedded in several loops

I have a situation where I have 3 while loops embedded inside one another and I need to pass a single value obtained from the first iteration of the central loop. I have thought of a few ways to do this, but I'm not sure which is the best or most efficient. The two ideas I have are to either use shift registers (which can get messy with 3 loops) to store the value, or to write to a local variable only once and then read it out later. Right now I'm using a combination of shift registers and auto-indexing, and finding the first value after the loops have completed. It works, but it doesn't seem very elegant. I'd love to hear some new suggestions or some thoughts about using local variables vs. shift registers.
Any help would be appreciated.
Ken

halvorka wrote:
The two ideas I have are to either use shift registers (which can get messy with 3 loops) to store the value,
Not really that messy . let's assume that the innermost loop sees all iteration (i.e. is not inside a case structure), all you need in an unintialized shift register in the innermost loop as e.g. shown in the figure.
Message Edited by altenbach on 08-30-2007 01:57 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
FirstInnermost.png ‏7 KB

How to pass multiple single values to parameter in planning function?

Hi!
I can not pass the variables (multiple single Values) from Input Layouts(BexAnalyzer) to Planning Function Types...Anyone have any idea for setting the parameter in the function types. I use the exit class CL_RSPLFC_BPS_EXITS.
My Parameter Type is Elementary and also use variables allowed

If you want to use the class as in a planning function type, proceed as follows:
1. Create an InfoObject that accepts the name of the function module as a characteristic value. We recommend that you create an InfoObject of type character with length 30 and indicate that this InfoObject is "Without Master Data".
2. In transaction RSPLF1, create a new function type. Chose the "Reference Data" option and enter the name of the class. This does NOT imply that reference data is read automatically, but results from the requirements for implementing the class.
3. On the "Parameter" tab page, create two parameters - one for the exit module and one for the init module. The parameters should be "elementary". Chose the InfoObject you created in step two as the dedicated InfoObject. The names of the parameters are determined from the values of constant P_C_NAME_EXIT_PARAM and P_C_NAME_INIT_PARAM.
4. If you require additional parameters in your function module (called exit parameters), you create these parameters as elementary parameters (with appropriate InfoObjects). Note an additional predefined parameter here - in many function modules, the name of the area is used from which the module is called. The area is not used in BI Integrated Planning but it may be the case that an area was created in BPS which only uses the current InfoCube. For this reason, you can create a parameter with the name specified in constant P_C_NAME_AREA_PARAM by specifying the name of this area to the function module. The value of this parameter is passed on to the function module in the interface as the value of the importing parameter I_AREA. Note that this technology can generally only by used for Basis InfoCubes and simple planning areas (not multi- planning areas or MultiProviders).
You can create additional elementary parameters as long as the names do not correspond to the predefined names. The class automatically recognizes the additional parameters and transfers them to table IT_EXITP in the function modules.
5. After you have activated the planning function type, you can create planning functions and fill the parameters accordingly.

Hierarchy node not available in Query Designer

Hello Gurus,
I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
Thanks,
Mark

Hi Mark,
You said you "find the hierarchy node variable in BW but it is not available in query designer".
How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
Regards,
Patricia

How to hide a single value node hierarchy in the query designer

Similar Messages

Maybe you are looking for