How to hide addnl data tab from CVO1N Transction
Dear Friend's
While creation of Document through CVO1N Transction first we fill up the data in "Document Data" tab then system gives"Addnl Data" tab.
Here i don't need this "Addnl Data" tab.
Pls guide me how i can hide the same tab.Give me the steps so i can implement.
Thanks in Advance.
Regds.
Sandeep
Additonal tab control with the assignment of class type and class in the document type. Removing class type and class will eliminate this additional data tab. In this case if any additional data is required then you will have to manually assigne class type and class within document each time
However this is not what you want, you want to assign additional data after you have created a document, therefore solution could be make characteristics and class as an optional field so that system does not enforce you to maintain information at the time of creation. Second solution could be thought of as screen variant
Similar Messages
-
How to replace existing fields in Addnl Data Tab in CV01N Transaction
Hi DMS Experts,
In cv01n transaction,
In Addnl Data Tab presently having following fields which i needs to be changed.
Addnl Data Tab:
Inbound Material Safety Data Sheet
MSDS Supplier
Product Number
Country
Dok-X Document Type
Dok-X Document Status
Dok-X Document Version
Dok-X Version Date
Above mentioned fields i have to change for Example i to maintain, Project Name, Responsible person name etc.
how i can do that.
Pls guide me step by step config steps
This i need very urgently.
Thanks in Advance.
Regards
SandeepHi,
the additional data tab is controlled by means of classes created in DMS.
if your requirement is something like,
project name
responsible person name etc..
for this - in CL01, you can create class, say Project XYZ
in CT04 - you can create characteristics as project name and person name..etc for this class.
in each characteristics you can maintain the values which will serve the requirement.
hope this helps U..!
Thank You,
Manoj
award points if useful..! -
How to create Customer data TAB in PO -ME23N
Can anyone tell me how to add 'Customer data' TAB in the PO heade TABSTRIP. I have to add it in the header besides 'Status' TAB.
I know an enhancement 'MM06E005' which is used for this purpose.
Thanks
SMSHi
see this sample doc and do it accordingly
by creating a project in CMOD and assigning the Enhancment MM06E005 and writing the code in the respective screen
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Regards
Anji -
CV03N only has addnl data tab, not content?
Hi experts
I hope to query one question about cv03n - > addnl data tab for classficaiton .
I found for some documents, the doc type has assigned the class type in IMG.
IMG-> document type-> assign class type 017 and CAD.
But when I use cv03n to display documents, it will only display the addnl data tab, but no classificaiton
content display below
What's the problem? For such document, how we could create classficaiton tab in document? We need add new characteristic data for Documents.
Thanks
ALICEHi,
I am also facing the same problem.
Please let me know how did you overcome this ? -
How to extract master data attribute from r/3 to bw give steps details
how to extract master data attribute from r/3 to bw give steps details screenshots
Hi
Go through the below process to extract Master Data Attribute from R/3
Hi,
Maintaining Generic DataSources
Use
Regardless of the application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any transparent table, database view or SAP Query InfoSet, or using a function module. This allows you to extract data generically.
Procedure
Creating Generic DataSources
1. Select the DataSource type and specify a technical name.
2. Choose Create.
The screen for creating a generic DataSource appears.
3. Choose the application component to which you want to assign the DataSource.
4. Enter the descriptive texts. You can choose any text.
5. Select the datasets from which you want to fill the generic DataSource.
a. Choose Extraction from View if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the database view or transparent table.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query if you want to use a SAP Query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction Using FM if you want to extract data using a function module. Enter the function module and extraction structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts you also have the option of extracting from fixed values for domains.
6. Maintain the settings for delta transfer, as required.
7. Choose Save.
When performing extraction, note SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extraction structure contains a key figure field that references a unit of measure or a currency unit field, this unit field has to be included in the same extraction structure as the key figure field.
A screen appears on which you can edit the fields of the extraction structure.
8. Edit the DataSource:
○ Selection
When you schedule a data request in the BI scheduler, you can enter the selection criteria for the data transfer. For example, you can determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extraction structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
○ Hide field
You set this indicator to exclude an extraction structure field from the data transfer. The field is no longer available in BI when you set the transfer rules or generate the transfer structure.
○ Inversion
Reverse postings are possible for customer-defined key figures. Therefore inversion is only active for certain transaction data DataSources. These include DataSources that have a field that is marked as an inversion field, for example, the update mode field in DataSource 0FI_AP_3. If this field has a value, the data records are interpreted as reverse records in BI.
If you want to carry out a reverse posting for a customer-defined field (key figure), set the Inversion indicator. The value of the key figure is transferred to BI in inverted form (multiplied by 1).
○ Field only known in exit
You can enhance data by extending the extraction structure for a DataSource by adding fields in append structures.
The Field Only Known in Exit indicator is set for the fields of an append structure; by default these fields are not passed to the extractor from the field list and selection table.
Deselect the Field Only Known in Exit indicator to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list and in the selection table.
9. Choose DataSource ® Generate.
The DataSource is saved in the source system.
Maintaining Generic DataSources
● Change DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component or change the texts of a DataSource. Double-click on the name of the table, view, InfoSet or extraction structure to get to the appropriate maintenance screen. Here you make the changes to add new fields. You can also completely swap transparent tables and database views, though this is not possible with InfoSets. Return to DataSource maintenance and choose Create. The screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BI system, choose DataSource ® Test Extraction.
● Delta DataSource
On the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the corresponding query. If you want to delete a DataSource, make sure it is not connected to a BI system.
NR -
How to hide the data in particular table in oracle 10g
How to hide the data in particular table in oracle 10g
i want stepsIf its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?
-
How do I keep multiple tabs from loading all at once when I open Firefox?
How do I prevent multiple tabs from loading every time I access Firefox? These are open tabs, but I do not want them to open simultaneously every time I want to open a new tab. Then I have to minimize each one in order to access other applications on my desktop. Please advise.
Tools > Options -> General - Startup = select what you want Firefox to do on startup there
'''Blank Page''' or '''Homepage''' ''(as long as those pages aren't all your Homepages)'' are alternatives to '''''windows and tabs from last time'''''
Or as Vivek.Wilfred mentioned, upgrade to Firefox 8.0.1 where you have abother option - Don't load tabs until selected. -
How to find the data loaded from r/3 to bw
hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u allHi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV -
Want to remove Technical data Tab from Work Center
Hi All,
I want to remove Technical data Tab from Work Center. I have Removed ''Technical data'' Tab from Plant Maintenance and Customer Service-->Master Data in Plant Maintenance and Customer Service -->Maintenance Plans, Work Centers, Task Lists and PRTs >Work Centers>Configure Screen Sequence for Work Center.
Still I am able to see Technical Data Tab in IR01, Work center.
Is there any other config to remove the same?This is resolved.
I have changed the config in following node as 0005 for PM
SPRO / IMG -> Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Maintenance Plans, Work Centers, Task Lists and PRTs -> Work Centers->General Data->Define Work Center Types and Link to Task List Application -
How to hide the PORT NUMBER from the URL
Hi,
We have Application on Node 1 and Database on Node 2
Apps Version: 11.5.10.2
DB: 9.2.0.6
We recently added a new node to act as web server for iSupport.
Now we are able to access the url using public Ip-address which looks like
http://<Internet Ip-Address>:<PORT NUMBER>
Eg: http://******.com:8000
But we dont want the *'PORT NUMBER(8000)'* to be displayed.
How to hide the port number ?..
Thanks in Advance,
MaheshHi Hsawwan,
Can you plz explain me the steps how to hide the port number from the url as our network administrator is not aware of this.
Regards,
Mahesh -
SQL Loader-How to insert -ve & date values from flat text file into coloumn
Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide.Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide. Try something like
someDate DATE 'DDMMYYYY'
someNumber1 "TO_NUMBER ('s99999999.00')"
someNumber2 "TO_NUMBER ('99999999.00s')"Good luck,
Eric Kamradt -
Hi all,
How to change a date value from "java.util.Date" to "java.sql.Date"?
I m still confusing what's the difference between them.....
thanks
Regards,
KinThanks
but my sql statement can only accept the format (yyyy-MM-dd)
such as "select * from xx where somedate = '2004-12-31'
but when i show it to screen, i want to show it as dd-MM-yyyy
I m using the following to change the jave.util.Date to str and vice versa. But it cannot shows the dd-MM-yyyy. I tried to change the format from yyyy-MM-dd to dd-MM-yyyy, it shows the wrong date in my application.
public String date2str(java.util.Date thisdate) {
if (thisdate != null) {
java.sql.Date thissDate = new java.sql.Date(thisdate.getTime());
return date2str(thissDate);
} else {
return "";
public String date2str(java.sql.Date thisdate) {
if (thisdate != null) {
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd");
return sdf.format(thisdate);
} else {
return "";
public java.util.Date str2date(String thisdate) {
String dateFormat = "yyyy-MM-dd"; // = 1998-12-31
java.util.Date returndate = null;
if (thisdate != null) {
SimpleDateFormat dateFormatter = new SimpleDateFormat(dateFormat);
try {
returndate = dateFormatter.parse(thisdate);
} catch (ParseException pe) {
System.out.println (pe.getMessage());
return returndate;
} -
How to get the date starting from 1 to the current date from the system dat
Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
call function 'HR_JP_MONTH_BEGIN_END_DATE'
exporting
iv_date = sy-datum
importing
ev_month_begin_date = gv_begda
ev_month_end_date = gv_endda.
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana -
How do I stop extra tabs from open on start up?
How do I stop extra tabs from open on start up? When I save new tabs the next time I open I have the new saved tabs. On the next opening after that are the same 7 tabs I don't want and didn't save. edit
Make sure that the pages aren't set as multiple home page, see
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
See also:
* http://kb.mozillazine.org/Preferences_not_saved
If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore -
Tell me how to format a date retrieved from a MS SQL Server 2000 database?
Tell me how to format a date retrieved from an MS SQL Server 2000 database for various uses in my JSP page?
Or if you want to use JSTL instead of a scriptlet see:
http://forum.java.sun.com/thread.jspa?threadID=676754&tstart=0
Maybe you are looking for
-
Can I copy XML from one RDL file to another
Hi I have created one report, worked on it as a prototype for a project - added datasets , params etc I now want to start again - from a template that we have just created - with professional layout, images etc - but want to copy the datasets, parame
-
Production order number in a purchase order
Hi guys, Is there anyway I can pull the production order number onto the related purchase order(i.e, if a purchase order has an item which is procured for a production order ). I'd appreciate your ideas and suggestions on this. Thanks Cheri
-
Any changes to DBMS_aq.dequeue in 9.2.0.8 ?
Hi, We had upgraded our oracle from 9.2.0.5 to 9.2.0.8 recently. We have been using DBMS_aq.dequeue to get the first message from the queue. When we were in 9.2.0.5 version, we used to get the oldest entry in the queue first (dequeue_options.navigati
-
IPhoto album slideshow will not play in the manually sorted order.
iPhoto Album slideshow will not play in the manually sorted order.
-
Using DB COnnect for SQL to BW interface
Hi All, When we are connecting an Oracle DB to BW using DB Connect we need the following parameters 1) Oracle DB SID to connect 2) Host Name 3) Listener Port 4) User id /password What parameters do we need to a SQL to BW DB Connection. Thanks Rashmi.