How to get the date starting from 1 to the current date from the system dat
Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,
concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
call function 'HR_JP_MONTH_BEGIN_END_DATE'
exporting
iv_date = sy-datum
importing
ev_month_begin_date = gv_begda
ev_month_end_date = gv_endda.
Regards,
Ravi
Message was edited by:
Ravi Kanth Talagana
Similar Messages
-
Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126). Any help would be appreciated. Using Windows 7 enterprise on an hp Z600
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
how can I installed my hp printer when I get a message that it is not currently available from the software update server?
The drivers are there. I see this quite often. What's happened is the supported devices list on the Mac is a little out of date. All you should have to do is disconnect the printer from the Mac, run Apple Software Updates, restart the Mac, connect the printer back to the Mac, and add the printer's queue to the Mac. You can find a little more information on this and other helpful tips in the link below. Let me know what happens.
Basic Printer Troubleshooting Steps for Mac
I am a printer tech for HP. -
How to get timestamp to start at zero hours?
Hi.
I'm building a software that logs values to excel.
The user can enter how long the test should run for, and the time elapsed should be set as a string in [hh:mm:ss]
The only problem is that the TimeStamp starts at 01:00:00 (beacuase of the 1904-issue i guess). How can I get the counter to start at 00:00:00, or maybe subtract the one hour in the begining so it starts at zero.
If you run the VI you'll understand what I mean.
Thanks!
Is my avatar the dog from the fraggle rock?
Solved!
Go to Solution.
Attachments:
forum_program1.vi 26 KBHi auto,
you have to use relative time instead of absolute time - see attachment...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
forum_program1.vi 27 KB -
I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. I have deleted it from iTunes but cannot get it off the phone. Help!
The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.
-
Not sure why I am getting this message anyway. I wasn't trying to buy anything. I just upgraded and then I tried to access the store. I had two purchases that I had previously made from a different computer. I was going to download them to this computer as my iPod is synced to this computer and you can only sync it to one computer. I was able to view my account information and from there I was able to click on the Purchased link. I saw the two items and downloaded them. But I received an error about the second album. It said that I didn't have sufficient privileges. When I checked all the songs had downloaded. Only the booklet was missing. Maybe this has something to do with the issue, I don't know. As far as I know, I purchased everything from the US store. I don't even know how to switch to a different store.
In any case, I can't access the store because the item I requested is not currently available in the US store. So why don't they just dump me at the home page instead of blocking me completely.It is working now. I no longer get the message about the item not being available in the US and I can access the store.
-
I disabled my iPhone 4 and while doing a restore via iTunes, it is downloading and timing out so the download is not completing. any idea how to get past that? I have tried many times and the same error keeps happening.
You need to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
Sorry, you've already lost all data on your phone. -
Just upgraded iPhone 3GS to IOS5. Now in itunes I can see there's 21GB of Others. I have no idea what is that. I didnt have that before the upgrade. How to get rid of it? It's taken up all the space on the phone.
I posted a fix for this temporary issue earlier but here it is in short:
The memory "hog" that is "others" seems to be the OS as it's installing. It seems to want more than 12GB and you may get stuck at the point where iTunes tries to load everything back on and the iPhone has run out of space. What you need to to is un-check the "sync" box at the apps, music, podcasts and other sections, then click the button to sync iTunes with iPhone. This will result in iTunes deleting all the data it restored, but you'll put it back later. Once you caused the deletion of most of the data, iOS5 will resume installing and then "magically" shrink to less than 1GB. Then you can place check marks back in the boxes and re-sync all your apps and other data. You will have plenty or memory left.
I followed the above procedure and my iPhone works perfectly.
Hope this helps. -
I had to restart my mac desktop because it froze now I went to restart it and all its doing is beeping at me. Does any one know how to get it to start again Please help
Welcome to the Apple Support Communities
It shows a hardware issue. How many beeps do you hear? See > http://support.apple.com/kb/HT2538 -
Can't install the software because it is not currently available from the Software Update server. this is the message that i get a few days now that i am trying to install windows through boot camp to my macbook!does anybody knows what i can do????
You keep it on the usb stick for after you boot into Windows. From Windows you install the Windows Support software on the stick. Do you realize that you need to buy and install Windows? The Windows Support software you downloaded is only the Windows drivers for your hardware.
Read the Boot Camp installation instructions and help guides located here: http://www.apple.com/support/bootcamp/ -
I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.
I have that problem too. There's many other discussion threads as well. Either Apple doesn't realize they have a problem, or they do and simply don't care. Either way, not good.
There is a workaround that I'm going to try next. Go to this webpage:
http://support.apple.com/kb/HT5634
Scroll down to the middle of the webpage. Hit "Expand All". Now, search the webpage for the Apple product name of your computer. It should be something like "MacBook Pro, 17-inch, Early 2008". If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit). Hopefully you'll find a "4" or "5" there. Click on that number, to go to the download page for the drivers that you need. If you just see an empty box there, then you're out of luck....
Hopefully there will be drivers. Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32). Use Disk Utility to format your USB stick if necessary. Now, you have the drivers you should have gotten from the Boot Camp Assistant download. You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
Hope it works!
Josh -
Can't install the software because it is not currently available from the Software Update server...what does this mean? I'm trying to install windows 8.1 on my early 2009 iMac. I double check with telephone support to make sure I am able.
Assuming you are referring to the Windows Support software, normally it means the download server is busy or off line. If you know what version of the support software you need you can get it here: http://www.apple.com/support/bootcamp/downloads/
But in your case since you have an early 2009 iMac, your computer does not support Windows 8.1. See this table from: http://support.apple.com/kb/HT5634
iMac (24-inch, Early 2009)
4
DVD
DVD
iMac (20-inch, Early 2009)
4
DVD
DVD -
Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server. Please help.
Installing an HP network printer
-
How to get informed by email about changes on service messages of the servi
How to get informed by email about changes on service messages of the service desk.
I need a kind of overview
functional details
and a very good guideline to do the implementation
Does anyone know how to do it?Hi,
Go throw this
Note 691303, Note 1041455
you will find each and every thing abt implementation .
Send mail to Message Processor in Service Desk
Points if helpfull
Regards,
Neni -
macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overnight?
What is it you need - Windows installer disc or something else? Your question is unclear. Could you be more specific?
Maybe you are looking for
-
Enlarge an image when clicked in a report
Hi i am using Apex 4.2.2 I have a requirement where I can display images in a report. Images are stored as blob in the database. I created an interactive report and I can display the image in the report. But when I need to know when I clicked on the
-
I have no other option. I have used the firewire connection previously and loved it, would love to use it again, but it's not possible. My camera is not equipped with a firewire connection, only MiniUSB and the a/v ports. The camera is a Samsung D164
-
AIX - Oracle Application Server 10.1.3 Sofware
Hi All, We downloaded the AIX version Oracle Application Server 10.1.3 from Oracle WebSite and tried installing the same in our AIX Machine. But we are getting an error saying that the file has been corrupted. We downloaded using download director fo
-
About a month ago, I lost some of my bookmarks, specifically, a whole folder. Since I periodically make backup of my bookmarks, I restored my last backup and everything worked well. Until I tried to bookmark a new URL. When I try to add a bookmark, t
-
Managers list as hirarchial order using web Dynpro
Friends, I have a requirement , where i need to display a list of managers and their employees as a hirarchial order in a table. I also need to add a status column which give the status of record the manager working on. the basic objective is , when