How to Hide buttons in HCM forms

Hi Experts,
In "Transfer" forms, with out filling mandatory fields if I press button "Check and Send" then I get a extra button called "Continue". When I click on "Continue" it takes me to the next page without asking me to fill mandatory fields. Here I want to hide that "Continue" button.
Like wise in "End of Probation & Short Term Contract" forms, with out filling the mandatory fields if I press button "Check and Send" then I get a extra button called "Forward to Expert". In my case I want to hide "Forward to Expert" button also.
Please help me to fix these issues.
Thanks & Regards,
Harish Kumar N
Moderator message -
When closing old threads, there is no need to add a comment. Adding a pasted answer like "fixed by myself" only brings old threads to the top of the forum list and pushes current ones down. If you do add a comment, please indicate just how the problem was resolved.
Edited by: Rob Burbank on Nov 2, 2011 9:30 AM

You do not need to add this field to your list. In the view V_T588MFPROPS (SAP delivered), this field is set as mandatory. In configuration, you must maintain the view V_T588MFPROPC (Customer area) and make sure the field is not set to mandatory. This will override the SAP delivered setting and the error message will be not be displayed.
Derrick Banks
Banks & Company, LLC

Similar Messages

How to use buttons in hcm process and forms?

Hi Experts,
I want to know how to use buttons in HCM process and form.
And when i click on the button it was validating all the fields and it was throwing an error ( complete SACHP fields) i am not using this filed in any where of my form.
So, please help in getting out of this error. And help me with some document, which method will trigger once we click on the button.
Thanks & Regards,
Rocky

You do not need to add this field to your list. In the view V_T588MFPROPS (SAP delivered), this field is set as mandatory. In configuration, you must maintain the view V_T588MFPROPC (Customer area) and make sure the field is not set to mandatory. This will override the SAP delivered setting and the error message will be not be displayed.
Derrick Banks
Banks & Company, LLC

How to hide fields in UIX form

Hi
I need to update the table with last_updated_by and last_updated_date every time if any change to the record. But I do not want to show these 2 fields on the screen.
Could you help me how to hide fields in UIX form/any procedure to insert the data to database with out placing them in the screen .
Thanks in advance.
NRK

Now that you mention it ... the rendered flag will stop the field from being rendered. So it's not even in the page. Stupid me.
Have a look at formValue. These are rendered, but invisible fields in a form. That should do it (hopefully).
In prepareForDML() you could simply call the setter of your date attribute that stores the date of the last update. There you pass the current date, or you could fetch the sysdate from the database and pass that. If you go that way, then the EntityImpl could make these adjustments automatically when inserting or updating and you wouldn't even need these fields/bindings in your UIX page.
Just check what the operation is, and if it's an update or insert then call the setters of the attributes you want to update. Then call super.prepareForDML(). Something like that.
It all would happen in the middle-tier, client not involved.
So formValue should work, and the prepareForDML() stuff should also work. Don't know which way you want to go.
Sascha

How to: disable buttons in standard forms

Hi all,
does anybody know how to disable session date button from standard forms?
I cannot find in forms (through Form Builder) the right data block / canvas where this button is.
Thanks all.
Jacopo

I'm not aware of any "session date button". A button on a form can be disabled using the set_item_property.
Use the layout editor and double-click the button. It will tell you what button it is. The button will also be highlighted in the Object Navigator window.
Message was edited by:
Mark Roberts

Want to hide button in a form if it is in insert mode

Dear Sir,
i am just developing some portal database provider forms and reports, i am calling a from
from one report using , and i just want to hide some button ex: save button in
the form and display the update button only when i call that form in the query
mode from the form using 3_d parameter , as both save and update buttons are
displayed when i call in any mode which i do not want
scenario :
1- create a portal db provider report using sql query on some table ex: employees table
2- include a link in that report to a form created on the same table ex: employees
with passing of parameter emp_no
ex: ''||emp_no||''
3- if the call in the query mode using 3d parameter (&p_arg_names=_emp_no_cond&p_arg_values=%3D) using note 248297.1,
when clicking on the link in the report on the emp_no the form appears with the
emp information displayed on the form and both ( save and update ) buttons
appearing
all that is working fine
is it possible to display the update button only without the save button on the form when this call in the query
mode happens???
note : i want the save button to be displayed only without the update button if i am running the form in the insert mode ( directly not from
report call)
please help ASAP. as it is urgent need
best regards
Ahmed Hussein

Usually, when you use a url like the example below to go to a portal form, the record will be queried up in the form, the Insert (Save) button will be hidden, and only the Update and Reset buttons will be shown. If you follow a url to the form without the "&p_arg_names=_EMPNO_COND&p_arg_values=%3D" in the url, it brings up the form in Insert mode with the Insert (Save), Query, and Reset buttons being shown and the Update button hidden.
To troubleshoot, double-check the URL in your report to make sure it is passing all the parameters with the correct p_arg_values for moduleid and COLUMNNAME (e.g. EMPNO). Here's an example:
http://your.portal.com/portal/pls/portal/PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=012346789&p_arg_names=COLUMN_NAME&p_arg_values=123&p_arg_names=_COLUMN_NAME_COND&p_arg_values=%3D

GS_CM. How to hide buttons: 'Attachment' and 'URL'

Hi,
Business object 'catalog product' use component GS_CM
We want to hide buttons: Attachment and URL
We need to use only button Advanced.
How I can customize it?
Denis.

Dear Denis,
Enhance Component GS_CM and view DocList.
Redefine method IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS and implement the following code:
super->IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS( ).
delete gt_button where id ne 'advanced'.
Hope this helps.
Thanks
Vishal
Edited by: Vishal Kesar on Aug 9, 2011 2:07 PM

How to hide buttons on standard FPM tool bar

Hi,
I have to hide two buttons on standard FPM tool bar....buttons are price simulation and useractions.
Technical details are...
FPM_OIF_COMPONENT and Configname is DPVMS_CC_VD
When i start configuration and open view : Web Dynpro Built in...
i can see..
CNRVIEW
....TC MAIN AREA
......TOOLBAR TOP
.......BUTTON CONTAINER
i can't able to see button names existed here...
Can anybody guide me how to get button names here ....i want to hide few buttons on button container...
Thanks,
Subba

Hallo Subba,
You should not be in Webdynpro build in.
I might be wrong ! i think you have started the wda component configuration and not the FPM application configuration->Component configuration.
In Se80,Navigate to your application,open the application node, select the application configuration,open it.
From there select the component and go to component configuration->press display button would lead you to the FPM configuration editor.

Standard backend service data vanishes on click of a button in HCM Forms

Hi,
I have a form which displays data from standard backend service SAP_PA and also from custom generic service.
When I click on a button in the form, the data from SAP_PA is disappearing.
Error message 'Please enter Personnel Number' is displaying.
Please help me to resolve the issue.

Hi Aravind,
Thanks for your reply...
Data is from standard backend service which is independent of user events..
Data is displaying for the first time when form is dispalyed on the portal but when user clicks on any button, data is disappearing...
Can you tell us the patch level of the system required for ESS MSS ??
As of now our system patch level is 11,,
This might be a problem for data vanishing?

How to Edit a custom HCM form directly after Employee selection?

Hi All,
As per the requirement, the Manager should have a tab in Portal called "Forms and Processess" and on click of that he should see a Page with few hyperlinks . Each hyperlink is the name of a HCM Form.
So, the Manager will click on one of them to start a particular form. ex. One time payment
After clicking, he should have the Employee search result having Direct reports under STEP "Select Employees".. But the next STEP has to be "Edit" instead of "Select Process" and the Form "One time payment" should directly Open for him to work on.
Please help me providing the relevant information and the approach. Let me know if you need any additional information.
Regards
DK
Edited by: DIPENDRA MOHANTY on Mar 11, 2011 12:05 AM
Edited by: DIPENDRA MOHANTY on Mar 11, 2011 12:06 AM

we do have selection of employees or search and you can choose a form?
If you want to change it, then only option is WD ABAP Iviews custom
But i still didnt fathom the need of teh approach above, does the standard doesnt meet the requurement? Please check it
which is pretty flexible

How to hide button in fb60 by transaction variant.

Hi experters,
I want to hide button some buttons in transaction code: fb60 by transaction variant(SHD0)
transaction code: fb60, input some date,
and then click simulation button,
then go to the simulation screen,
I want to hide some button on this screen,
but I find it is impossible to hide it.
because when I click enter button, there is no response ,
there is no screen popup, so I cann't hide any field or button with transaction variant.
Please help me...
Regards,

Thanks .
I want to use transaction variant to hide that button,
I tried using transaction variant, I have created transaction variant on initial screen's variant of fb60,
but I found I can't recored that screen of simulation screen.
can any one have any idear??
Thanks.
Edited by: harry wang on Jan 7, 2009 5:43 AM

How to hide buttons in UWL

Hi,
When we select one task and click on View Detail in UWL it will open another window with task details and some buttons Launch Webdynpro,Forward,Assign to Me,Open Form and links like Display details in SAP GUI.
We want to hide some of the buttons based on the task.can we acheive this by modifying xml file
Thanks
Bala Duvvuri

Hi srinivas,
Please refer to the earlier post from Sandeep:
http://help.sap.com/saphelp_nw70/helpdata/en/09/6d6b17b29b4eef83a553acaa52f668/content.htm
You need to locate the UWL iView within the relevant portal role in Content Administration. The iView
has a property to exclude certain actions from tasks. You can enter a comma delimited list of which
actions you want to switch off.
After saving the iView properties go into System Administration->Navigation and clear the portal
role cache(s), log out and back in again and the UWL should reflect the changes.

How to hide Report's Parameter Form Urgent Please

Hello to All!
How we can hide Reports Parameter Form when we are calling a report from our form by using RUN_PRODUCT built in.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Amir Sajjad ([email protected]):
Hello to All!
How we can hide Reports Parameter Form when we are calling a report from our form by using RUN_PRODUCT built in.<HR></BLOCKQUOTE>
Hi Amir!
You must add to your paramlist the following parameter:
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
Bye

How to hide button in application tool bar

Hi
There is a standard SAP report. after executing it,
There are 5 buttons in application tool bar .
I want to hide 3 of the buttons,
How can I hide them not by change program.
(Ex, can I use transaction variant).
Best Regards,

try to use transaction variant....
Edited by: shan palani on Dec 17, 2008 10:48 AM

How To hide buttons in standard ESS /MSS applications .

I have implemented standard ESS/MSS business package version mySAP2005 in ECC 6.0. Now in a standard iView buttons like Edit ,Previous ,etc are present . Now how can I hide these buttons ,say Edit button from iview level ?Now since this is Client Requirement .
My main problem is I do not have adequate time to customize the standard applications through coding .Is there any other way to do it ?Thanks in advance for any solution provided quickly as goalive is near .

Hi Ribhu,
Open the iview in question and do a CTRL+right click.
Hope this helps in serving your purpose.
Points are welcome!
Cheers,
Sandeep Tudumu

How to hide button according to app_user

Hi friends ,
I have a requirement where a button 'create' will be displayed (not enabling) only if the APP_USER is Y . How do I do this ?
Thanks & Regards
Umer

What do you mean by "not enabling" ?
You can put this in the condition for a button to toggle its appearance
:APP_USER = 'Y' Are you an ex-forms programmer? Just wondering why you potentially want to show a button without enabling it?

How to Hide buttons in HCM forms

Similar Messages

Maybe you are looking for