How to hide Dynamic Parameter userid/password prompts on infoview

Hi,
I want to hide Userid/password for each dynamic parameter, which gets prompts while refreshing or scheduling a report
I do enter userid and password at CMC->database level but when report has dynamic parameter it still does prompts for each parameter.
Please advise.
Megha

I tried what you suggested..
Well I run into different error now while refreshing report suing dynamic prompt.
Error says 'List of Values failure: fail to get values.[Cause of error:Failed to the connetion.ProductName]
ProductName is my dynamic Parameter.
Please advise.
thanks
Megha

Similar Messages

  • Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

    MDT 2012 U1
    Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
    I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
    We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
    The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
    But since we use the fields they must still  be fuctional just not seen.
    Thanks.....
    If this post is helpful please click "Mark for answer", thanks! Kind regards

    You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
    Example:
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=NO
    SkipAdminPassword=YES
    UserID=<MyUserID>
    UserPassword=<MyPassword>
    UserDomain=<MyDomain.com>
    SkipProductKey=NO
    SkipComputerBackup=YES
    SkipBitLocker=NO
    -Nick O.
    Nick,
    SkipAdminPassword=YES is for:
    You can skip the Administrator Password wizard page by using this property in the
    customsettings.ini.
    I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
    DomainAdminPassword=xxxxx
    DomainAdminDomain=xxxxxx
    JoinDomain=xxxxxx
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • How to Hide the Parameter field at run time....

    Hi,
    I have a parameter field which behaves differently depending on the User logged in.
    It has the LOV coming from following SQL.
    SELECT customer_name FROM Cust_mast;
    If the user = 'INTERNAL' then the Where clause will be
    WHERE cust_id in('DELL', 'SBC', 'BANK')
    Else there will be no WHERE clause or the parameter field
    should be hidden in the parameter form.
    So my questions are:
    1) How to hide the Parameter field during Run time?
    OR OR OR
    2) How to change the LOV select statement during Run time?
    Thanks.
    Ram.

    Hi Ram,
    Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
    However, what you want can be done in 2 other ways:
    1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
    1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
    <form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
    <select name="selected_customer" onChange="First.submit()" >
    <option value="">Choose a Customer Name
    <rw:foreach id="G_cust_id" src="G_cust_id">
         <rw:getValue id="myCustId" src="CUSTOMER_ID"/>
    <rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
    <option value="<%=myCustId%>"><%=myCustName%>
    </rw:foreach>
    </select>
    </form>
    In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
    Navneet.

  • How to hide the Parameter field during Run time?

    Hi,
    How to hide the Parameter field during Run time?
    I have a parameter field which behaves differently depending on the User logged in.
    I am using reports 10G
    For ex: I have 3 field created in JSP
    CUSTOMER
    PROVIDER
    FROM DATE
    END DATE
    If the user = 'SUPER show all the parameter
    CUSTOMER
    PROVIDER
    FROM DATE
    END DATE
    If the user is 'GATEKEEPER" Just show
    PROVIDER
    FROM DATE
    END DATE
    Can I do that?
    Please help
    Thanks.
    KK

    hi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.

  • How to use dynamic parameter when a report is created using Stored Procedures

    Hi all,
    any one have the idea of how to use dynamic parameter in crystal report XI R2
    when report is created using Stored Procedure.
    Regards
    shashi kant chauhan

    Hi
    You can create an SQL command in Database Expert > Expand your datasource > Add command
    Then enter the SQL query that will create the list of values to supply to the user
    eg select field1,field2 from table
    Then edit the parameter of the report.  These will be the SP parameters adn can be seen in field explorer.
    Change the parameter type to Dynamic
    Under the word Value click on Click here to add item
    Scroll down to your Command and select one of the values that you want to appear in the list
    e.g field1
    Then click on the Parameters field - this is essential to create the param
    You can edit other options as required
    That should do it for you.
    I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
    Best of luck

  • How to hide dynamic parameters values in the URL with Reports 6i

    Hi,
    I want to know a way of hiding the parameters values when asking for a report through the web.
    Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameters DESTYPE = cache and DESFORMAT = pdf, it is fully generated and in the Address or Location box of the browser, you can see http://webserver/cache/report.pdf (where cache is the virtual directory defined in the OWAS in which the .pdfs are cached). So, users cant see the Url used to generate the report.
    Im trying to upgrade this configuration to Reports 6i with Cgi in a web server. I generate reports with no problems. The problem I have is I cant find how to hide the parameters values as before. I mean, when I ask for a report, once its generated I can see http://webserver/cgi-bin/rwcgi60.exe?server=ServerName&report=report.rdf&userid=user/pass@connection&destype=cache&desformat=pdf&P1=value1&P2=value2 in the Location box. It allows user to ask for another report changing the values of the parameters. I use these parameters to execute some query written in the Data Model. For example, imagine that the P1 represents the company id, the user (that is supposed to see only data of its company) can change this id, ask for a new report and see data of another company.
    Ive already tried to use the key mapping option, but its not useful to me because the parameters values are dynamic and its impossible to define different entries in the cgicmd.dat for each possible value. The option of loading the parameter form before running a report is not useful to me either, because there exists specific screens for this purpose.
    Is there any solution?
    Thank you.
    Marma Bonfiglio.

    Hi Rakesh,
      I am using BI  7.0
    The last option I have is 'Hide' for 'Calculate single values as' .
    I have the below options  for 'Calculate single values as'
    1. Normalise  according to Next group  level  Resul.
    2. Normalize according to  Overall Result
    3. Rank number
    4.Olympic Rank Number
    5.Maximum
    6. Minimum
    7.Counter for all detailed values
    8.Counter for all detailed values that are non zero
    9.Moving average
    10.Moving average  That is  Not zero ,null or Error
    11. Hide.
    So could you please tell me where i can find 'suppress result' option for the keyfigure .
    Many thanks

  • ORACLE 10g Reports- how to hide the parameter screen

    QUESTION:
    : I have a report that was designed in 6i. It has a parameter screen. Now I converted the report to 10g and pass parameters to the report from a form. Therefore the 6i parameter screen is not required. However, when I look into the report editor PAPER PARAMETER FORM icon, the old 6i parameter layout appears.
    HOW do I stop the 6i parameter screen from appearing? I dont need it anymore since the parameters are passed in from a form.

    Hi,
    Do this
    Go to DevSuiteHome_1\reports\conf\cgicmd.dat
    this file contains theMapping file for Oracle Reports
    see this link
    how to hide url (use, password and db) in oracle 10g

  • How to set dynamic parameter in list of values in parameter property

    Hi,
    I am using cr4e-all-in-one-win_2.0.1version.I have created .rpt file in that how to set dynamic parameters(from database) in list of values parameter property
    Regards,
    amol

    Hi,
    I am using cr4e-all-in-one-win_2.0.1version.I have created .rpt file in that how to set dynamic parameters(from database) in list of values parameter property
    Regards,
    amol

  • How to pass dynamic parameter to a database function in OBIEE

    Hi,
    I have a requirement like this. I have to create one report in OBIEE which was in Discoverer. Now in discoverer report there are some calculated item in the worksheet based on database pkg.functions. The parameter which user gives at run time that parameters are then passed to the discoverer calculated items dynamically. But I am not able to do this in OBIEE answers.
    Can anyone tell me step by step how I can able to pass the user selected parameter values in OBIEE answer level.
    The example:
    GET_COMM_VALUE_PTD("AFE Cost & Commitment".Afe Id,:"Period Name(AFE)","AFE Cost & Commitment".Data Sel,"AFE Cost & Commitment".Org Id)
    GET_COMM_VALUE_PTD --- Function database
    ("AFE Cost & Commitment".Afe Id,:"Period Name(AFE)","AFE Cost & Commitment".Data Sel,"AFE Cost & Commitment".Org Id --- Parameters... :"Period Name(AFE)" is the dynamic parameter selected run time by user.
    Please help.
    Thanks
    Titas

    Hi,
    I already did that. But the existing discoverer re value report is showing correct value but the OBIEE report with EVALUATE function shows incorrect value.
    The requirement is to create a OBIEE Dashboard from a Discoverer existing report. Now in discoverer report theere are several calculated items in worksheet level where database custom function is used and user selected parameter value is passed run time in that function. But when that is created in OBIEE with EVALUATE function in RPD, the report shows incorrect data. Could not understand how to pass the parameter value runtime.
    Below is the discoverer 'Show SQL' query and EVALUATE function syntax which has been used.
    SELECT APPS.XXBG_PL_PROJ_ANALYSIS_AFE_PKG.GET_COMM_VALUE_PTD(XXBG_PL_PROJ_AFE_V.AFE_ID,
    :"Period Name(AFE)",
    XXBG_PL_PROJ_AFE_V.DATA_SEL,
    XXBG_PL_PROJ_AFE_V.ORG_ID),
    XXBG_PL_PROJ_AFE_V.AFE_DESC,
    XXBG_PL_PROJ_AFE_V.AFE_NUMBER,
    XXBG_PL_PROJ_AFE_V.APPROVED_AFE_AMOUNT
    FROM APPS.PA_PERIODS_ALL PA_PERIODS_ALL,
    APPS.XXBG_PL_PROJ_AFE_V XXBG_PL_PROJ_AFE_V
    WHERE ((XXBG_PL_PROJ_AFE_V.ORG_ID = PA_PERIODS_ALL.ORG_ID))
    AND (XXBG_PL_PROJ_AFE_V.DATA_SEL = :"Data Selection(AFE)")
    AND (PA_PERIODS_ALL.PERIOD_NAME = :"Period Name(AFE)")
    AND (XXBG_PL_PROJ_AFE_V.AFE_NUMBER = :"AFE Number(AFE)")
    AND (XXBG_PL_PROJ_AFE_V.OPERATING_UNIT = :"Operating Unit(AFE)")
    The EVALUATE function syntax is as below:
    EVALUATE('XXBG_PL_PROJ_ANALYSIS_AFE_PKG.GET_COMM_VALUE_PTD(%1,%2,%3,%4)' AS FLOAT , "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Afe Id", "BG PL Project Analysis Report_1"."Periods 1"."Periods 1.Period Name", "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Data Sel", "BG PL Project Analysis Report_1"."AFE Cost & Commitment"."AFE Cost & Commitment.Org Id")
    The PERIOD needs to be passed at run time which user will select.
    Please help to solve the issue.

  • How do I get a supervisor password prompt to appear so I can configure the BIOS?

    Question How do I access the BIOS setup on a Thinkpad T60? 
    AnswerTo access the BIOS setup,
    1. Press the F1 key when the system boots
    2. You'll be prompted for the password.
    3. Enter your Supervisor password at the prompt
    The Power on password prompt and the supervisor password prompt are the same 
    If a power on password was configured you would need to enter this afterwards, the same applies to HDD password.

    You'll never get a supervisor prompt- I have PWR ON, HDD and Supervisor PWD.- If I want to enter to sipervisor mode, I have to enter the Supervisor PWD when asked for the Power On PWD....really tricky...

  • How can i retrive my userid/password?

    I forgot my userid/password of my oracle 9i ,how can i retrive it?

    I forgot my userid/password of my oracle 9i ,how can
    i retrive it?What's your os platform?
    Which user are you talking about?
    a priori, a reset procedure can be executed
    1. Are you the DBA?. From your OS where DB is installed
    $ sqlplus '/ as sysdba'
    SQL> ALTER USER yourUser IDENTIFIED BY yourPassword;
    2. You aren't the DBA. :( Technically speaking, you can do nothing.

  • How to stop the the icloud password prompt for an old email

    I desperately need help.  My iphone 4s can't be used because the icloud password prompt comes up every 2 seconds.  I had an old itunes account with an old email a long time ago and cancelled the email address. i.e I can't go back into it to read any emails anymore. PS I've never used an icloud account with this email address.
    For some reason my Iphone is prompting me to put in a password to sign into this icloud account with my old email address.  I try to cancel it but it just prompts me again 2 seconds later.  I now can't use my iphone becuase of this.
    I've log into all accounts (itunes/ipad/iphone/icloud) and looked at my Apply ID and passwords etc and all are the same, i.e the correct (newer) email address. I've tried to cancel the icloud account on my iphone but it wants the password for the icloud account with the old email and I never set up an account, so don't have anything to type in.
    It's saying my accounts not verified on my iphone and tries to send me an email to the correct email address to verify it but I never receive an email to this account to do that.
    Is there a way to cancel the old email account on itunes or some other magical trick to help me.
    Thankyou for your help in advance.
    Jodie

    I desperately need help.  My iphone 4s can't be used because the icloud password prompt comes up every 2 seconds.  I had an old itunes account with an old email a long time ago and cancelled the email address. i.e I can't go back into it to read any emails anymore. PS I've never used an icloud account with this email address.
    For some reason my Iphone is prompting me to put in a password to sign into this icloud account with my old email address.  I try to cancel it but it just prompts me again 2 seconds later.  I now can't use my iphone becuase of this.
    I've log into all accounts (itunes/ipad/iphone/icloud) and looked at my Apply ID and passwords etc and all are the same, i.e the correct (newer) email address. I've tried to cancel the icloud account on my iphone but it wants the password for the icloud account with the old email and I never set up an account, so don't have anything to type in.
    It's saying my accounts not verified on my iphone and tries to send me an email to the correct email address to verify it but I never receive an email to this account to do that.
    Is there a way to cancel the old email account on itunes or some other magical trick to help me.
    Thankyou for your help in advance.
    Jodie

  • How to display dynamic parameter picklist based on other parameter?

    The report uses two parameters 1.  Order placed date and 2. Sales Agent name.  First parameter (Order placed date) is a static date range that allows users to enter a date range to run the report.  The second parameter is a dynamic parameter that displays Sales Agent names as a picklist. Users can select one or more agent names. This pick list is generated using a SQL command.
    We would like to display the names of Sales agents (in the parameter pick list)  who were active (i.e. who took orders) between the date range selected in the first parameter.
    Currently the picklist, lists names of ALL sales agents (about 100) irrespective of the date selected in first parameter. So, users are forced to go through the entire list of agents instead of agents that were  active during that period.
    We are using CR 2008 on Edge 3.1. 
    Any elegant way to achieve this? Your help is appreciated.
    Regards,
    Mohit.
    Edited by: Mohit Saran on Oct 19, 2009 2:46 PM

    I realized that the question got posted in Bus Objects General forum and have reposted it in Crystal Reports Design forum (as originally intended). Sorry for the confusion.

  • Crystal Reports dynamic parameter does not work in InfoView

    Hello,
    We have developed Crystal Reports in CR2008 on top of SAP infoset and we have one of our selection parameter as dynamic parameter. It works fine in the CR Dev tool but when i upload the report in the InfoView, report does not show any value in the "Available Values"
    Any input will be much appreciated.
    Thanks.

    I did found the solution for this, i had to go into Business View Manger (BO Client Tools) and Schedule the LOV (List of Values). This is odd setting! but it works....

  • How to hide user id and password for auto login in Analyzer 6.5?

    Could anyone tell me is it possible to hide the user id and password for auto login in Analyzer version 6.5 and how?Thanks in advance...

    Sainath,
    Referring admin guide as mentioned by Craig is good option.
    Let me give you few steps that I did in one of my projects.
    Open command prompt and navigate to the path "C:\Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\batch-client".. here you can see many see other utilities as well.
    drm-batch-client-credentials.exe is the one used to encrypt the userid and password.
    open this in command prompt and then choose the application to which you want to encrypt the password.
    then remove userid and password from batch script then run it... it does what you want

Maybe you are looking for