How to hide information on VC?

Hi every one.
i am working on a VC model, but I meet some issues:
I do not konw how to hide repeated information from a line.
for example, I have:
aaaaa    bbbbb
aaaaa    ccccc
aaaaa    ddddd
xxxxx    zzzzz
xxxxx    yyyyy
And I'd like to have:
aaaaa bbbbb
          ccccc
          ddddd
xxxxx zzzzz
          yyyyy
Can anyone help me on this?
thanks a lot in advance.
Pierre

Salut benjamin.
In fact, I think it is just for 'beauty".
what I really want did not wotk on my last message.
I want to pass from
aaaaa bbbbb
         aaaaa ccccc
         aaaaa ddddd
         xxxxx yyyyy
         xxxxx zzzzz
to
aaaaa bbbbb
      ccccc
      ddddd
xxxxx yyyyy
       zzzzz
thanks a lot for your help.
Pierre

Similar Messages

How to hide information on the rtf template based on some condition

Hi,
I'm writing a new rtf template for our custom PO print program in EBS 11.5.10.. In reports 6i, you can have a format trigger on a frame or repeating frame and you can achieve this.. Can you please let me know if this is possible in XMLP and how can i do it..
Thanks,
Shree

Hi Shree,
see for example if you want to get the employees record group by department number then...in this case if you want to hide some columns of employees then use if condition...where you are using ur column name.....
like this .....if you want to hide salary column for dept no 20 then
if dept no<> 20 then sal end if;...... use this at the column def....
its like a dynamic data column generation.....for the exact code you can refer to XML Publisher User Guide......Chapter is Creating RTF Template.....section is dynamic Data Columns...
Regards
Ravi

How to hide "Request Information" in FYI?

Hi all,
Please tell me how to hide "Request Information" in FYI. I know we can do it through Workflow. But i created a FYI using AME. Is it possible to do it on functional level.
Regards,
Pradeep

Found the answers:
1. The service Impl should implement the javax.xml.rpc.server.ServiceLifecycle interface.
In this way you get access to a javax.xml.rpc.server.ServletEndpointContext, which gives access to amongst others javax.xml.rpc.handler.MessageContext, which gives access to request information
2. In the Handler it is possible to store information on the MessageContext, which can be accessed in the service Impl (see 1.).
Groeten,
HJH

HOW TO HIDE MDI WINDOW INFORMS 9I WHEN THEY RUN IN WEB BROWSER

Hi. Will any body tell me how to hide the default MDI window title in Forms 9i when it run in Web Browser. I am using the "Look and feel" property as "Generic" in Formsweb.cfg file. I tried the RESIZE,POSITION,MINIMIZE,VISIBLE FALSE properties of SET_WINDOW_PROPERTY FUNCTION, But the horizontal Bar at the top displaying "Window" on it, is displayed. OR some time form is not displayed at all. So plz help me. This kindness of any one will be appriciated.
Regards
Inayat Qazi

Hi Inayat,
To remove the ORACLE icon, change the line "logo=" to "logo=x" in file formsweb.cfg.
I am not sure if it is possible to remove the standard-menu (horizontal bar with word Window, as you describe it), because as far as I know it is inheritance for the Windows OS. In other words, removing the standard menu can only be achieved if you run on another OS.
Kind regards.

How to hide iplanet Version information

Hello,
I want to hide, iPlanet Server Information i.e Version/Build/Hotfix information from the Header Message.
Also i want to hide information when i do
telnet localhost 25, It gives me iPlanet version/Build/ Hotfix
I dont want this information to be get display,
Can any one update me on this .... is it possiable.
Thank You
Regards
Devendra

You have to add your own ServerString to magnus.conf, see: http://docs.sun.com/source/817-1834-10/crmagnus.html#wp1004737

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

How to hide remote IP address in header for roaming users

Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
Hello everyone,
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam. What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.
Any assistance on this would be greatly appreciated. Thanks in advance.

MarketData.com wrote:
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam.How often is this occurring (messages being blocked as "spam" due to the content of an existing Received header)?
What spam software is being used that blocks these messages?
Very large organisations/ISP's use Sun Messaging Server and this is the first time I have heard of this occurring.
What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.Removing the IP address information is going to be extremely difficult. The standards are quite clear that the Received: header should include the IP address information.
RFC 2821 (SMTP), Section 4.4 Trace Information:
   When an SMTP server receives a message for delivery or further
   processing, it MUST insert trace ("time stamp" or "Received")
   information at the beginning of the message content, as discussed in
   section 4.1.1.4.
   This line MUST be structured as follows:
   - The FROM field, which MUST be supplied in an SMTP environment,
      SHOULD contain both (1) the name of the source host as presented
      in the EHLO command and (2) an address literal containing the IP
      address of the source, determined from the TCP connection.Regards,
Shane.

How to hide column of DataGrid

I am making a web part in which I am using System.Web.UI.WebControls.DataGrid control.
It's AutoGenerateColumns property is set to TRUE.
I am trying to hide a column at run time. I have written the following code on this controls ItemCreated event but it only works if I e.Item.Cells[0] and it doesn't work for any other value for e.g. e.Item.Cells[1] and e.Item.Cells[6].
There are 9 columns in my DataGrid control.
Code
protected void grd1_ItemCreated(object sender, DataGridItemEventArgs e)
{ e.Item.Cells[0].Visible = false; //works fine
e.Item.Cells[1].Visible = false; //gives error e.Item.Cells[2].Visible = false; //gives error
Error
Specified argument was out of the range of valid values.
Parameter name: index
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
How to hide a particular column?

Hi Frank,
You can try something similar to the below in 'RowCreated' event Instead
protected void gridView_RowCreated(object sender, GridViewRowEventArgs e)
e.Row.Cells[1].visible =false;
OR I would say hiding column is not something that is to be done at row level, so you can hide columns outside any of the grid view event after binding.
e.g.
gridview1.columns[1].visible=false;
I am using DataGrid control in which there is no RowCreated event.
I have tried second approach but it also doesn't work.

Button is generated at runtime how to hide it in WD4A

Hi Experts,
i am using SAles processing application thru Portal , there i have Customer search in the customer search iview i want to hide create sales order button.
i found the technical details by using personalization option
Technical Information for UI Element
General Information About the Application and Component
Application: POWL
Web Dynpro Component: SALV_WD_TABLE
Window Information: TABLE
View Information: VIEW_TABLE
Configuration ID: O200705080740527294200
Information on Field
Field ID: F_CREA
Type of UI Element: TOOLBAR_BUTTON
UI Element Library: STANDARD
Attributes of UI Element
List of Attributes
Attribute Name Value Context Path Type
COLLAPSIBLE
DESIGN standard (00)
EXPLANATION
TEXT Create Sales Order
IMAGE_FIRST X
IMAGE_SOURCE
TEXT_DIRECTION inherit (02)
ENABLED
TOOLTIP
VISIBLE visible (02)
ON_ACTION
VALUE_HELP_KIND
VALUE_HELP
what i found is Create sales order button is generated dynamic at runtime , how to hide dynamic generated button.

Hi,
First you need to figure out where the button is being dynamically generated. Then you can use the enhancement framework to hide the button (Change the visibility of the button) once it is generated. The enhancement framework allows you to add code at certain positions within the application. You will have to find a point after the button is generated.
Hope this helps
Wenonah

How to hide or do not show the receipt's name after miss called?

1. How to hide or do not show the receipt's name after miss called?
2. I do not want to show my message statement in the screen.

I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
The strange thing is that the Embedded Web Server says:
"This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
Please help with solving this issues?

How to hide items on Windows 8 File Explorer Ribbon

Scenario
This article describes how to hide items on the file explorer ribbon in Windows 8 and Windows 8.1.
Method
We can implement it via customizing the permission of the related registry keys.
Note: Before you make changes to a registry key or subkey, we recommend that you export, or make a backup copy, of the key or subkey.
Before you make changes to a registry key or subkey, we recommend that you
export, or make a backup copy, of the key or subkey.
Step 1:
Open
Registry Editor and locate to following registry key under which you can find the corresponding keys of the items on the File Explorer Ribbon.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\CommandStore\shell\
In the following figure, it shows the Add a network location item on the file explorer ribbon, and the corresponding
registry key in Registry Editor.
Step 2:
Take ownership of the registry key
Note: You can take ownership
of a registry key if you are logged on as an administrator or if you have been specifically assigned the permission to take ownership of the registry key by the current owner.
Right-click on the registry key which you want to take ownership of,
and then select
Permissions... option.
Click on
Advanced button to grant special permissions in the key.
At the top to the right of the current
Owner, click on the Change link.
Enter
Administrator in the Enter the object name to select
box, and then click on Check Names.
Click on
OK twice to apply.
Step 3:
Change the permission of the registry key.
On
Permissions for the key name display dialog, click
Administrators in the Group or user names window, and then select the
Allow check box for
Full Control
option.
Click
Users in the Group or user names window, and then select the
Deny
check box for
Full Control
option.
Step 4:
Click on
Apply and OK to save the changes and the following figure shows the modified permissions and owner.
Step 5:
When you open File Explorer, the item you would like to hide disappears. For your information, the following is an example:
Item: Add a network location
Corresponding Registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\CommandStore\shell\Windows.AddNetworkLocation
For advanced users
You can also deploy script with Set-Acl which is a PowerShell command to take ownership and change permissions
of the keys. For your information, please refer to the following articles to learn more about this command:
Set-Aclhttp://technet.microsoft.com/en-us/library/hh849810.aspx
SET-ACL on registry key
http://blogs.technet.com/b/brad_rutkowski/archive/2008/09/29/set-acl-on-registry-key.aspx
Apply to
Windows 8
Windows 8.1
Welcome to your feedbacks.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

The reason they gave was it is possible for the file to stay open when done with the file. (not properly closing) As the driver would be accessing the file to retrieve the thumbnail.
The thing is a driver is nothing more than a program it self. Therefore it is capable of opening and closing a file and placing the thumbnail into the database for that folder. It then would be capable to verify if the thumbnail exists in that database. Since the driver only has to run when explorer is open in that folder's view, it really is not running that often.
The catch I can see it when both Illustrator and explorer are running at the same time. Which one should close the file? The solution would be a small app that verifies that both programs are running and has control of clean up when both have closed. The driver and Illustrator could also in theory check and see if the other is running, if it is do nothing if not then close the file.
So it really boils down to having the driver and Illustrator talking to each other.

How to hide the view latest instance option for the reports in XIR3

Created an access level and denied the rights "view document instances" and "view document instances that the user owns" in the access level.
Applied this access level for a particular group on a particular folder.
Login to Infoview and when view the history,there are no instances for a particular report under that folder.
But we could still see the 'View Latest instance' option in the properties of the report and when click on it,we are able to view the report.
As per the security assigned,the user should only be able to view the instances owned by him.
Plz help me how to hide the option in INFOVIEW

In 9.3.1 (not sure about 9.2) there is a table in your BIPlus repository which stores preferences/profile information, however, having a user simply log in to WA doesn't appear to automatically create a row for them in this table. (So this may not be a viable solution to your situation, I'm still looking for one myself.) This table stores lots of preference info such as whether or not to show the Main Menu, Toolbar, Masthead, etc. by default.
To hide the View Pane, edit the data in the SHOW_INFO_PANEL column, change it from a 1 to a 0 and for that user the View Pane will not longer appear by default.
HYA_USER_PREFS
But again, this only works if you already see the user in the table otherwise I guess maybe they have to 'touch' their Preference before it creates an entry in that table. Haven't figured that part out yet, and Support didn't have any information.
If anyone has found a way to maneuver through the table structures I'd love to hear any insight you can offer.
Before you make any changes to the data in this table be sure to take adequate repository backups, and use caution as usual.
I'm going to create a Shared Preference and have each user point to it the first time they log in - but then you lose the ability for each user to have their own personal folder as their default, so it's still not the ideal solution. Really wish there was a way for Admins to set certain prefs. A coworker reminded me under 7.? or 6.x things like View Pane were system-level settings which was easy to control, but now it's at the user level.
Good luck,
Karen

How to hide custom metadata field in custom profies ??

hi,
how to hide custom metadata dropdown list in a custom profile based on choosing the security group.
ex: if i choose xxx security group, custom metadata dropdown should not appeared, for remaining security groups it should be visible.
so, Based on criteria, custom metadata should be hidden in custom profiles..
how to achieve it ?? where and how to configure ??
Detail guidance should be required
Thanks in advance

You cannot do this through profiles alone if I understand you correctly.
If I load a check in page, choose a security group and at this moment want a custom metadata field to disappear then you are beyond what profiles offers.
Rules evaluation can only be based on information that is know at the time the page is requested. That means in order for this to work you would need to make security group an non editable field and have a set of profiles for each security group.
The alternative is to customize the UI with soem DHTML or AJAX
Tim

How to hide Header Page in Report Builder 6.0

Hi,
I am trying to modify the existing report. My requirement is to add a cover page to the report. Based on condition the cover page should not be displayed.
Ex: If currency='USD' then
cover page along with the report body
else
if currency = NULL then
report body should be displayed.
I wrote a format trigger on cover page frame. but it is displaying blank page as first page. It should not display blank page.
Format trigger:
function M_Cover_Page1FormatTrigger return boolean is
begin
if (:CP_currency IS NULL)
then
return (FALSE);
end if;
return (TRUE);
end;
Please help me out how to hide header page in report.
Thanks & Regards,
Sateesh kumar S

Patchset 1663658
Simple Search Advanced Search Quick Links Saved Searches
Description Forms & Reports 6I-PATCH-4 for (NT,95,98,2000)
Product Oracle Developer Family
Release 6i
Platform or Language    -------- Platforms --------Microsoft Windows (32-bit)
Last Updated 11-MAY-2001
Size N/A
This patchset is obsolete in this platform and language. Please see the reason stated below. Please contact Oracle Support for replacement patch.
Reason for Obsolescence
Forms&Reports 6i-Patch-4 for WindowsNT has been obsoleted, owing to the fact that a later verison, <b>patch-4a is now available for download via metalink</b>
Patchsets known to include or supersede Patch 1663658
No information available from the patch repository
Download Notes
Click here for the UNZIP utilities for most platforms.
You may also download patches using any FTP client by connecting to updates.oracle.com. Connect with your Metalink username and password and read the welcome banner for more instructions. Looks like you want patchset 1747364 now. As soon as you get into Metalink, change the Quick Find drop down to be "Patch Number" and put "1747364" into the search text box. This should pull up the patch you need.

How to hide options from InfoView's "Schedule Report Page"?

Hi,
We are using Business Objects XI R2 InfoView (Java version) to schedule the reports.
Whle schedling the reports, schedule page displays the following option to the users -
1. When
2. Database Logon
3. Filters
4. Destination
5. Format
6. Print Settings
7. Server Group
8. Events
9. Parameters
And I need to display only three options (When, Format and Parameters) to the user and want to hide the rest of the options from the user.
Please let me know how to acheive this using the InfoView (Java version)?
Thanks,
Vicky

Thanks for the reply.
I do not want the user to enter / change the database logon information and other setting of the report. As I set those info using the CMC.
And writing the our own pages using SDK will take lots of efforts and require java professionals for that.
I only need to hide those options please let me know how to hide them.
Thanks.
Vicky

How to hide information on VC?

Similar Messages

Maybe you are looking for