How to hide or change TCP/IP fingerprint?

After executing 'nmap -O -A 127.0.0.1', it returns some lines starting with 'OS:'. How to change it?

byte wrote:What messages, just the OS: fingerprint lines from nmap? Well, don't use OS detection or version scanning, read the manpage, grep -v the output...
Yes, only fingerprint. I want to prevent others from knowing the type of my OS.

Similar Messages

  • How to hide save changes alert window when no changes made to the form

    hi,
    in my form when i close the form without making any changes it displays do you want to save the changes alert.how to hide this alert when no changes are made to the form window.
    regards
    Yesukannan

    Be advised that this solution will also exit the form without saving the changes and asking anything if the user did make changes.
    You're probably changing some field from a PL/SQL trigger (hint: post-query or when-new-record-instance are likely). If you set the value of a field from a trigger or program unit that also marks the record as changed for Forms. Forms will then ask to save the changes when exiting the form.
    If you want to prevent this, reset the record status after you change the field in the PL/SQL code.

  • How to Hide Track changes according to Specific user?

    Hello All,
         We are developing plugin and we have to hide the changes according to specific user. We are setting the track change preferences using the methods provided by ITrackChangeAppSettings interface.
         But as this interface is aggregated on kWorkspaceBoss it is applying the changes for all users.
         Will anyone please suggest how can I apply changes according to particular users? any help is appretiated.
    Thanks & Regards,
    Praveen

    Hello All,
               For hiding the tracked changes according to particular user,i have accept the changes according to specific user.But i have undo the changes it means before saving i have to undo the accepted changes.I am using VOS_RedlineObject::UndoSimpleChange() method but it is not working.
                Can anyone tell me other way for doing that?
    Thanks & Regards,
    Megha

  • How to hide or change the design in oaf

    1. we want to hide the oracle default logo and display the department logo based on the payroll attached to the employee.
    2. how can we give a link on a custom oaf page this link must direct the end user to absence sshr screen...how can we do it?
    your contribution to this is highly appreciated!''
    many thanx to go through my post...hope som1 will respond to my thread.

    Hi Jenny ,
    Well there should a way to change the Corporate branding dynamically
    This is how we need to proceed ,
    Step 1 ) Prepare all different logo 's that you want to print and place them in path i mentioned above
    Step 2 ) Using profile potion we can change the Corporate branding image .
    (pls refer this : http://oraclemaniac.com/2012/02/22/change-the-default-oracle-logo-on-oracle-apps-login-page)
    Step 3 ) From controller class we can dynamically change the value of profile option .
    (pls refer this : Changing a profile value at the controller level )
    For you 2nd question :
    you can set Destination URI OA.jsp?page=/oracle/apps/per/selfservice/absence/webui/AbsenceHomePagePG&retainAM=Y
    Regards ,
    Keerthi

  • How to hide full name when publishing photos to icloud's public website?

    When allowing iPhoto to publish photos to iCloud (Public Website, allow anyone to view this photo stream at:..." my full Name (xxx by xxx) is always displayed when opening the link.
    Does anyone know how to hide or change the name displayed?

    I tried changing my name (Apple ID). It had no effect on the Aperture photo stream website page (and yes, I tried it with a new photo stream).
    I still think your name should not be included by default with public website, as well as ability to prevent pictures from Copy/Save.

  • How to hide/unhide the all Treenodes on Treeview based on Checkbox changed event in Sharepoint custom webpart Sitecollections

    How to  hide/unhide the all Treenodes on Treeview based on Checkbox changed event?
    Checkbox(Control)
    1.Checkbox Checked:(Action below like)
     if user click on  Checkbox, all the treenodes on treeview is hide.
    2.Checkbox Unchecked(Action below like)
    If user uncheck the Checkbox  all the treenodes on treeview is unhode.
    Could you please help me how to do above one.
    Badri

    Hi,
    According to your post, my understanding is that you want to hide/show the TreeView when the Checkbox checked/unchecked.
    We can use jQuery to achieve it, the following script for your reference:
    <script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
    <script type="text/javascript">
    $(function () {
    $("input[type=checkbox]").click(function () {
    if (this.checked) {
    $("#TreeViewID").hide();
    } else {
    $("#TreeViewID").show();
    </script>
    More information:
    http://dineshsharepoint.blogspot.com/
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How to hide dynamic parameters values in the URL with Reports 6i

    Hi,
    I want to know a way of hiding the parameters values when asking for a report through the web.
    Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameters DESTYPE = cache and DESFORMAT = pdf, it is fully generated and in the Address or Location box of the browser, you can see http://webserver/cache/report.pdf (where cache is the virtual directory defined in the OWAS in which the .pdfs are cached). So, users cant see the Url used to generate the report.
    Im trying to upgrade this configuration to Reports 6i with Cgi in a web server. I generate reports with no problems. The problem I have is I cant find how to hide the parameters values as before. I mean, when I ask for a report, once its generated I can see http://webserver/cgi-bin/rwcgi60.exe?server=ServerName&report=report.rdf&userid=user/pass@connection&destype=cache&desformat=pdf&P1=value1&P2=value2 in the Location box. It allows user to ask for another report changing the values of the parameters. I use these parameters to execute some query written in the Data Model. For example, imagine that the P1 represents the company id, the user (that is supposed to see only data of its company) can change this id, ask for a new report and see data of another company.
    Ive already tried to use the key mapping option, but its not useful to me because the parameters values are dynamic and its impossible to define different entries in the cgicmd.dat for each possible value. The option of loading the parameter form before running a report is not useful to me either, because there exists specific screens for this purpose.
    Is there any solution?
    Thank you.
    Marma Bonfiglio.

    Hi Rakesh,
      I am using BI  7.0
    The last option I have is 'Hide' for 'Calculate single values as' .
    I have the below options  for 'Calculate single values as'
    1. Normalise  according to Next group  level  Resul.
    2. Normalize according to  Overall Result
    3. Rank number
    4.Olympic Rank Number
    5.Maximum
    6. Minimum
    7.Counter for all detailed values
    8.Counter for all detailed values that are non zero
    9.Moving average
    10.Moving average  That is  Not zero ,null or Error
    11. Hide.
    So could you please tell me where i can find 'suppress result' option for the keyfigure .
    Many thanks

  • How to hide remote IP address in header for roaming users

    Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
    libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
    Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
    Hello everyone,
    We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam. What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.
    Any assistance on this would be greatly appreciated. Thanks in advance.

    MarketData.com wrote:
    We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam.How often is this occurring (messages being blocked as "spam" due to the content of an existing Received header)?
    What spam software is being used that blocks these messages?
    Very large organisations/ISP's use Sun Messaging Server and this is the first time I have heard of this occurring.
    What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.Removing the IP address information is going to be extremely difficult. The standards are quite clear that the Received: header should include the IP address information.
    RFC 2821 (SMTP), Section 4.4 Trace Information:
       When an SMTP server receives a message for delivery or further
       processing, it MUST insert trace ("time stamp" or "Received")
       information at the beginning of the message content, as discussed in
       section 4.1.1.4.
       This line MUST be structured as follows:
       -  The FROM field, which MUST be supplied in an SMTP environment,
          SHOULD contain both (1) the name of the source host as presented
          in the EHLO command and (2) an address literal containing the IP
          address of the source, determined from the TCP connection.Regards,
    Shane.

  • How to hide Actions Column in Table

    Hi All,
    I have a simple requirement: I am showing a table (items)
    - the "Actions" column (Column with Buttons to Edit and Delete a particualr row) must not be show -> no changes to the table are allowed (I need to hide/ disable this column)
    How can I hide this column od the table?
    I have found out that the field is called thtmlb_oca and that htere is a getter method get-thtmlb_oca. However, the method does not contain coding and I do not know how to HIDE this field/ column...
    Please help me here..
    Thanks, Johannes

    Hi Johannes,
    To remove the column completely,
    you need to comment this line in the method GET_TABLE_LINE_SAMPLE of the Table View Context node class.
    TYPES: BEGIN OF line,
    *  thtmlb_oca  type  crm_thtmlb_one_click_action.
      INCLUDE TYPE xxxx.
      TYPES:  END OF line.
    Disabling can be controlled in the method GET_OCA_T_TABLE of the same class by putting code to delete the button.
    LOOP AT  rt_actions ASSIGNING <fs_actions>.
          <fs_actions>-active  = abap_false.
        ENDLOOP.
    Regards,
    Masood Imrani S.

  • Button is generated at runtime how to hide it in WD4A

    Hi Experts,
    i am using SAles processing application thru Portal , there i have Customer search in the customer search iview i want to hide create sales order button.
    i found the technical details by using personalization option
    Technical Information for UI Element
    General Information About the Application and Component
    Application: POWL
    Web Dynpro Component: SALV_WD_TABLE
    Window Information: TABLE
    View Information: VIEW_TABLE
    Configuration ID: O200705080740527294200
    Information on Field
    Field ID: F_CREA
    Type of UI Element: TOOLBAR_BUTTON
    UI Element Library: STANDARD
    Attributes of UI Element
    List of Attributes
    Attribute Name Value Context Path Type
    COLLAPSIBLE      
    DESIGN standard (00)    
    EXPLANATION      
    TEXT Create Sales Order    
    IMAGE_FIRST X    
    IMAGE_SOURCE      
    TEXT_DIRECTION inherit (02)    
    ENABLED      
    TOOLTIP      
    VISIBLE visible (02)    
    ON_ACTION      
    VALUE_HELP_KIND      
    VALUE_HELP      
    what i found is Create sales order button is generated dynamic at runtime , how to hide dynamic generated button.

    Hi,
    First you need to figure out where the button is being dynamically generated. Then you can use the enhancement framework to hide the button (Change the visibility of the button) once it is generated. The enhancement framework allows you to add code at certain positions within the application. You will have to find a point after the  button is generated.
    Hope this helps
    Wenonah

  • HOW TO HIDE FIELDS IN A CUSTOM TABLE

    Hi all,
    I've a requirement where there's a maintainence view attached to  a custom created table. Whenever I add new entries via View, on saving the record, 2 of its fields only should appear.
    For example, if my table looks like this,
    SAP ID     OBJECT ID     FROM DATE     TO DATE
    Once i add a new record, when i press save, only 2 of fields say, SAP id and Object Id should appear instead of all the fields.
    Can someone throw light on this if you're aware? Any input in this regard will be highly valuable to me and appreciated. If someone is unable to intrepret this question, do let me know, I'll detail it again.
    Thanks in Advance,
    Vaishnavi Varadarajan

    hi Vaishu,
    Hide parameter / select option in selection screen
    We can Hide parameter / select option in selection screen dynamically by manipulating screen object.
    SCREEN is like an internal table with a header line. However, you do not have to declare it in your program. Go to debugging mode and then view structure of screen.
    You can modify SCREEN in your ABAP program during the PBO event of a screen. Its contents override the static attributes of the screen fields for a single screen call. The only statements that you can use with SCREEN are:
    LOOP AT SCREEN.
    MODIFY SCREEN.
    ENDLOOP.
    We can hide parameter by set screen-active to 0.
    Here is example of how to hide parameter in selection screen. Write it, and change click on radiobutton to hide parameter.
    REPORT ZAALGAL0006.
    DATA: d_ucomm LIKE sy-ucomm.
    PARAMETERS: p_grpa1(10) MODIF ID A,
    p_grpa2(5) MODIF ID A,
    p_grpb1(2) MODIF ID B.
    PARAMETERS: p_actA RADIOBUTTON GROUP rad1 USER-COMMAND ACT DEFAULT 'X',
    p_actB RADIOBUTTON GROUP rad1.
    AT SELECTION-SCREEN.
    d_ucomm = sy-ucomm.
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT screen.
    IF p_actA = 'X'.
    IF screen-group1 = 'B'.
    screen-active = 0.
    ENDIF.
    ELSEIF p_actB = 'X'.
    IF screen-group1 = 'A'.
    screen-active = 0.
    ENDIF.
    ENDIF.
    MODIFY screen.
    ENDLOOP.
    START-OF-SELECTION.......
    pls refer the below sites for reference. they may help you
    http://www.blogtoplist.com/software/blogdetails-14026.html
    http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html
    https:/.../servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/905e3d36-0301-0010-30ac-b55865545635
    thanks
    sagar
    reward me points if usefull

  • How to hide fields in Infotype 16 for Molga 28

    Hi Guys,
    I need to hide some fields for IT0016 for Molga 28. Earlier we have assigned different screen for this molga .But now we have assigned the standard  screen to IT0016 i.e. View-3211. But when i go to node Change Screen Modifications, i m unable to find MP321100. I have checked through PA30 for chinese employee the Program is MP321100 and screen is 2000.
    COuld you guide how to hide some of the fields for Chinese Molga 28 in IT0016.
    Regards,
    Navneet

    Hi Harish,
    I havent got the chance to check with BASIS yet....they are lil busy .....meanwhile i have created an entry in t588m with Module pool mp321100 and feature p0016. As u told i have created entry with Molga 28 and return key 28 in P0016 feature.
    Could you confirm that i need to Create mP321100 or i could have done it via mp001600 as told by other guy.
    And now if i go the fields are hidden except for two fields which strangely are coming "ER Notice Period" and
    "EE Notice Period". I have hidden all fields still these two fields are cming any idea why?
    Regards,
    Navneet

  • How to hide or reorder mailboxes on iPhone 6?

    Hi I have a lot of mailboxes with subfolders I don't want to see on my iPhone 6 so I'm trying to work out how to hide and reorder them. I can see how to do it in iOS 7 but it seems to have changed? Can I do it from the phone?
    Help please!
    Rod

    Hello chemahmud,
    It sounds like you have Grayscale turned on. If you go to Settings > General > Accessibility and toggle off Grayscale. Once you do that you should have color back.
    Invert Colors and Grayscale
    http://help.apple.com/iphone/8/#/iph3e2e1fb0
    Regards,
    -Norm G.  

  • How to hide fields in UIX form

    Hi
    I need to update the table with last_updated_by and last_updated_date every time if any change to the record. But I do not want to show these 2 fields on the screen.
    Could you help me how to hide fields in UIX form/any procedure to insert the data to database with out placing them in the screen .
    Thanks in advance.
    NRK

    Now that you mention it ... the rendered flag will stop the field from being rendered. So it's not even in the page. Stupid me.
    Have a look at formValue. These are rendered, but invisible fields in a form. That should do it (hopefully).
    In prepareForDML() you could simply call the setter of your date attribute that stores the date of the last update. There you pass the current date, or you could fetch the sysdate from the database and pass that. If you go that way, then the EntityImpl could make these adjustments automatically when inserting or updating and you wouldn't even need these fields/bindings in your UIX page.
    Just check what the operation is, and if it's an update or insert then call the setters of the attributes you want to update. Then call super.prepareForDML(). Something like that.
    It all would happen in the middle-tier, client not involved.
    So formValue should work, and the prepareForDML() stuff should also work. Don't know which way you want to go.
    Sascha

  • How to hide a drive in Windows 7, Service Pack 1

    Could someone please tell me how to hide a partitioned drive (example my drive E:/) so that my kids cannot access it on their separate, non administrative account?

    How to hide a partition in Windows?
    Right-Click on My Computer [Computer in Windows Vista and Windows 7]
    Click on Manage
    From the list of options Click on Disk Management that will be located in the left-bottom section
    All your hard disk and its partitions will be show in the right hand side
    Right-Click on the partition that you want to hide and select "Change Drive Letters and Path"
    Click on "Remove" and click "Yes"
    Your drive will now be hidden in my computer
    To unhide the drive :
    Go to Disk Management Right-Click on the hidden partition [there will not be a drive letter on the hidden drive] again select "Change Drive Letters and Path"
    Click on add and select an appropriate drive letter.
    Click Ok
    Now the drive is unhided.
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

Maybe you are looking for