How to hide standard fileds ?

Hi All,
How can we hide the standard fields like Company Code , Location , Goods Recipents etc under the tab Basic Data in EBP?
Thanks,
Anubhav

Hi Anubhav,
You can use BBP_UI_CONTROL_BADI to hide these standard fields under the basic data tab.
Sample Code:
CASE IV_FIELDNAME.
          WHEN 'GS_SCR_BASIC_I-BE_CO_CODE' OR 'GS_SCR_BASIC_I-RECIPIENT_ID'.
                    CV_INVISIBLE = C_X.
                    CV_INPUT_READY = ' '.
ENDCASE.
You can try hiding these fields in the Screen Variant through the SHD0 Transaction.
Thanks,
Pradeep

Similar Messages

How to hide the fileds

how to hide the fileds in a form for one activity and how to display the same fields to another activity? in the same process
Edited by: jaya on Aug 9, 2010 10:07 PM
Edited by: jaya on Aug 9, 2010 10:40 PM

Inside of the screenflow, you can determine the name of the activity in an Autmatic task using logic like this:
myObject.activityName = Activity.nameThe use of upper case "Activity" in the above logic is correct for logic inside of an automatic task inside a screenflow.
This would let you use an if / elseif statement inside your presentation initialization method to hide or show the fields based on the activity's name. Note that this is actually the activity id. It is not the activity name you see in Studio that can be edited.
Dan

How to hide standard Iviews in MSS employee profile service

Hi ,
I am on MSS Add on 1.0 .
when I click on Team then employee infomration then employee profile.
I can see details of employee. How to hide additional information like salary data , compensation information, apprisal which is part of standard delivery.
Please see attachment.
Regards,
Vijay

Package PAOC_MSS_PROFILES_WDA Config ID HRMSS_EMP_OVER_PROFILE Application name is HRMSS_EMP_OVERVIEW_PROFILE and there you can delete as shown in below blog for similar case. http://scn.sap.com/community/erp/hcm/employee-self-service/blog/2012/04/25/mss-homepage-customisation http://scn.sap.com/thread/3486553 http://scn.sap.com/thread/3554348

How to hide standard application toolbar through config?

Hi,
My requirement is to make the transaction SWIA available in CRM WEB UI and to hide some buttons from the application toolbar like the execute Work Item, display Workflow Log buttons and few more. Is there a way i can do it through cong?

You can use transaction variants.
[http://help.sap.com/saphelp_nw04s/helpdata/en/67/232037ebf1cc09e10000009b38f889/frameset.htm]
Your fist step will be to execute transaction SHD0 and create a transaction variant for SWIA. Then you can create a Z transaction (ZSWIA) that will call SWIA with the transaction variant you have just created.

How to hide standard page links on oaf page

hello buddies,
on the oaf page header section we have links like: "Navigator" , "Favorites" , "Home" , "Logout" , "Preferences" ..etc
also, we have some links on the footer section like : "Privacy Statement" , "Home" , "Logout" , "Preferences" and copy right.
I want to remove all these links on my custom page except for "Home" and "Logout" is this possible?
please advise.
Thanking you all to find some time to read my post!
Jenny

Hi,
May be you need to remove the the links from the global Menu, ICX_STANDARD_GLOBAL_MENU or the related global menu in that page.
See one of my old thead
Re: adding a new link in global button bar
and the blog
http://apps2fusion.com/at/kv/321-oa-framework-copyright-privacy
might be helpful.
Thanks,
With regards,
Kali.
OSSi.

How to "Hide signature field validity icon when signature is valid" in Acrobat 6 Standard?

I know how to "hide the signature field validity icon" in Acrobat 8 Pro, but just can't seem to find where to do it in Acrobat 6 Standard.
Thanks for any help!
.....Sean

Hi Sean,
That functionality didn't exist in version 6. I got to tell you though that version 6 is way past its end-of-life and you really should be using a newer version.
Steve

How to hide watermark when viewing in acrobat 8 standard

Hi,
2 of my colleagues (also having same versions of acrobat) manage to open a pdf file without the watermark showing.
I have been googling around and found that there is an option to set.
To specify when the watermark appears, select or deselect Show When Printing and Show When Displaying On Screen.
But i couldn't find the option on my PC(windows xp). I would like to know how to hide the watermark when viewing in acrobat 8.?
Thanks,

Thank you, i understand now.
so in that case, why does my 2 colleagues can view the pdf file with the watermarks hidden. While for me, i can see the watermark when i view the same file?
appreciate your clarification.

How to hide fields on Sourcing cockpit

Hi,
Our client wants to hide some of the fileds in the Souricng cockpit which they are not using by their purchasing department. example contract, auction, info rec etc in Sourcing cockpit
How to hide this fields in Sourcing cockpit?
They wants to bring internal note to soucing cockpit sceen, it is time cossuming for Puchasing department to drill down to each SC line item in Sourcing cocpit to see internal note for SC having 100+ items.
Thanks
Ravi

Hi Ravi,
You can even use the Screen variants to hide the standard fields on sourcing cockpit.
Go to transaction SHD0--> Screen Variants.
Transaction Code: BBPSOCO01
To hide fields on the worklist the screen variant is BBP_SOCO_WL. Make a Z copy of this screen variant say ZBBP_SOCO_WL. Go inside this Z screen variant in change mode and tick in invisible box opposite to the field you want to hide. Save the screen variant.
Now go to BADI BBP_SCREENVARIANT
Method GET_SCREENVARIANT_SOCO
Assign EV_SCVARIANT = 'ZBBP_SOCO_WL'.
This will definately hide the fields. For bringing internal note , you need to create a customer field similar to internal note and assign the value of internal note to it.
Hope this helps.
Thanks,
Pradeep

How to hide remote IP address in header for roaming users

Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
Hello everyone,
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam. What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.
Any assistance on this would be greatly appreciated. Thanks in advance.

MarketData.com wrote:
We have a new messaging server and have been struggling in our effort to figure out how to hide the remote IP address of users who send email from a remote location. When a roaming user sends out an email from a remote location using SMTP AUTH to authenticate, the messaging server includes the remote ISP's dynamic IP address in the header of the email, which in turn results in some recipient mail servers blocking the mail message as spam.How often is this occurring (messages being blocked as "spam" due to the content of an existing Received header)?
What spam software is being used that blocks these messages?
Very large organisations/ISP's use Sun Messaging Server and this is the first time I have heard of this occurring.
What we want to do is have messaging server rewrite or remove the roaming user's dynamic email address so the header does not reflect a user working remotely. The net effect would be the header not reflecting any external address and the messaging appearing to have originated internally.Removing the IP address information is going to be extremely difficult. The standards are quite clear that the Received: header should include the IP address information.
RFC 2821 (SMTP), Section 4.4 Trace Information:
   When an SMTP server receives a message for delivery or further
   processing, it MUST insert trace ("time stamp" or "Received")
   information at the beginning of the message content, as discussed in
   section 4.1.1.4.
   This line MUST be structured as follows:
   - The FROM field, which MUST be supplied in an SMTP environment,
      SHOULD contain both (1) the name of the source host as presented
      in the EHLO command and (2) an address literal containing the IP
      address of the source, determined from the TCP connection.Regards,
Shane.

Button is generated at runtime how to hide it in WD4A

Hi Experts,
i am using SAles processing application thru Portal , there i have Customer search in the customer search iview i want to hide create sales order button.
i found the technical details by using personalization option
Technical Information for UI Element
General Information About the Application and Component
Application: POWL
Web Dynpro Component: SALV_WD_TABLE
Window Information: TABLE
View Information: VIEW_TABLE
Configuration ID: O200705080740527294200
Information on Field
Field ID: F_CREA
Type of UI Element: TOOLBAR_BUTTON
UI Element Library: STANDARD
Attributes of UI Element
List of Attributes
Attribute Name Value Context Path Type
COLLAPSIBLE
DESIGN standard (00)
EXPLANATION
TEXT Create Sales Order
IMAGE_FIRST X
IMAGE_SOURCE
TEXT_DIRECTION inherit (02)
ENABLED
TOOLTIP
VISIBLE visible (02)
ON_ACTION
VALUE_HELP_KIND
VALUE_HELP
what i found is Create sales order button is generated dynamic at runtime , how to hide dynamic generated button.

Hi,
First you need to figure out where the button is being dynamically generated. Then you can use the enhancement framework to hide the button (Change the visibility of the button) once it is generated. The enhancement framework allows you to add code at certain positions within the application. You will have to find a point after the button is generated.
Hope this helps
Wenonah

How to hide fields in Infotype 16 for Molga 28

Hi Guys,
I need to hide some fields for IT0016 for Molga 28. Earlier we have assigned different screen for this molga .But now we have assigned the standard screen to IT0016 i.e. View-3211. But when i go to node Change Screen Modifications, i m unable to find MP321100. I have checked through PA30 for chinese employee the Program is MP321100 and screen is 2000.
COuld you guide how to hide some of the fields for Chinese Molga 28 in IT0016.
Regards,
Navneet

Hi Harish,
I havent got the chance to check with BASIS yet....they are lil busy .....meanwhile i have created an entry in t588m with Module pool mp321100 and feature p0016. As u told i have created entry with Molga 28 and return key 28 in P0016 feature.
Could you confirm that i need to Create mP321100 or i could have done it via mp001600 as told by other guy.
And now if i go the fields are hidden except for two fields which strangely are coming "ER Notice Period" and
"EE Notice Period". I have hidden all fields still these two fields are cming any idea why?
Regards,
Navneet

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

XCelsius Map component - how to hide mouse over region value?

Hi guys,
I have one problem with a map component:
Please open standard Xcelsius map sample: File -> Samples -> Map
If you turn your mouse to state, for example Alabama you will see "Alabama 31.66"
I need only "Alabama", how to hide this "31.66"?
I created colored map but user should not see the value, he should see just name of the map region
Any ideas?
Thanks in advance

Question answered
Option is on the Apperance - Text tab

How to hide some column filter operators in Interactive Report

Hi,
I have an APEX 4.2 application what includes Interactive Report page.
Is there possibilty to hide or disable some filter operators in column filter?
But I don't want to disable all filter functionality for end users.
For example how to hide/disable operator "matches regular expression".
Some filter operators are too complicated for end users.
I have searhced but not found solution.
regards,
Erkki

erkkik wrote:
I have an APEX 4.2 application what includes Interactive Report page.
Is there possibilty to hide or disable some filter operators in column filter?
But I don't want to disable all filter functionality for end users.
For example how to hide/disable operator "matches regular expression".
Some filter operators are too complicated for end users.
I wouldn't really recommend this. Users will quickly recognise what works for them and avoid options that they do not currently understand. However, over time—through training or advice from more experienced users—they may come to understand and use all of the available features. Blocking access (especially in a non-standard way) to options that users may eventually need is likely to result in unnecessary development work now and at some (possibly inconvenient) time in the future.
That said, this really isn't difficult to implement using CSS. Use your browser web inspector to identify which filter types are to be blocked, using the value attribute of the filter Operator select list in the generated IR HTML. For example, in APEX 5.0 a filter operator select list looks like:
<select id="R70597672218719366505_STRING_OPT" class="a-IRR-operator" data-column-type="STRING" title="Operator" name="p_ignore_10" size="1">
<option value="=">=</option>
<option value="!=">!=</option>
<option value="is null">is null</option>
<option value="is not null">is not null</option>
<option value="like">like</option>
<option value="not like">not like</option>
<option value="in">in</option>
<option value="not in">not in</option>
<option value="contains">contains</option>
<option value="does not contain">does not contain</option>
<option value="regexp_like">matches regular expression</option>
</select>
The "matches regular expression" option has the value regexp_like, so the required CSS rule using the IR operator select list class and an attribute selector on the option value is:
.a-IRR-operator option[value="regexp_like"] {
display: none;
Additional selectors for other filter types can be added to this rule as required, for example:
.a-IRR-operator option[value="regexp_like"],
.a-IRR-operator option[value="is not null"] {
display: none;
to eliminate the "is not null" filter.
To implement this for all IRs in your application, create a custom CSS style sheet containing the rule, upload it to your workspace, and reference it in all of the page templates used for IR pages.
This is not a 100% foolproof solution. CSS is not an appropriate way to implement security restrictions. A web-savvy user could use their web inspector to disable the CSS rule and access the blocked filter(s). However there is little risk here as (1) it appears that your users will lack the required expertise; and (2) doing so will only allow them to further filter data they already have access to.

How to hide standard fileds ?

Similar Messages

Maybe you are looking for