How to hide the list screen
HI all,
When i am calling another screen from my report program to display the result. I am Able to display the result on the intended screen but when i click on back the back button it is returing to the list screen first and than next to the selection screen.
I dont want to get the list screen in between but only the selection screen should be displayed when i click on the back button.
How to avoid the display of the list screen.
Thanks in advance.
Regards
Satish.
Hi,
Could u plz give the part of code where u get this problem. Need to know whether u r calling a transaction?
Try this
MODULE user_command_9100 INPUT.
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE. " to SCREEN 0.
WHEN 'BACK'.
SET SCREEN '0'.
LEAVE SCREEN.
This leaves the program but you may need to re-call the
transaction to go back to the original screen
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_9100 INPUT
Message was edited by: Judith Jessie Selvi
Similar Messages
-
How to hide the on screen bottom navigation bar - ...
I'm new to Windows Phones , and I was looking at the Lumia 630 Dual sim version but discovered that it has an on screen navigation bar , instead of physical capacitive buttons. I can't seem to find out a way to hide the on screen navigation bar , does any one know if this is some how possible ?
yasfer21 , Thaks for that
This shot below is from a 630 ( 8.1 )
Attachments:
missing.jpg 143 KB -
How to hide the selection screen of a Logical datebase?
Dear All,
I used the logical database PNP in one of my program by maintain the attribute 'Logical Database' of this program.
Now I want to hide all the selection screen of this PNP during the ABAP runtime environment.
Who can tell me how I can realize it?
Thank you!
Regards,
Brian LiuHi,
If you call the logical database using a function module, the selection
screen is not displayed.
To call a logical database from another program, use the function module LDB_PROCESS.
<b>Example code:</b>
TABLES SPFLI.
SELECT-OPTIONS S_CARR FOR SPFLI-CARRID.
TYPE-POOLS: RSDS, RSFS.
DATA: CALLBACK TYPE TABLE OF LDBCB,
CALLBACK_WA LIKE LINE OF CALLBACK.
DATA: SELTAB TYPE TABLE OF RSPARAMS,
SELTAB_WA LIKE LINE OF SELTAB.
DATA: TEXPR TYPE RSDS_TEXPR,
FSEL TYPE RSFS_FIELDS.
CALLBACK_WA-LDBNODE = 'SPFLI'.
CALLBACK_WA-GET = 'X'.
CALLBACK_WA-GET_LATE = 'X'.
CALLBACK_WA-CB_PROG = SY-REPID.
CALLBACK_WA-CB_FORM = 'CALLBACK_SPFLI'.
APPEND CALLBACK_WA TO CALLBACK.
CLEAR CALLBACK_WA.
CALLBACK_WA-LDBNODE = 'SFLIGHT'.
CALLBACK_WA-GET = 'X'.
CALLBACK_WA-CB_PROG = SY-REPID.
CALLBACK_WA-CB_FORM = 'CALLBACK_SFLIGHT'.
APPEND CALLBACK_WA TO CALLBACK.
SELTAB_WA-KIND = 'S'.
SELTAB_WA-SELNAME = 'CARRID'.
LOOP AT S_CARR.
MOVE-CORRESPONDING S_CARR TO SELTAB_WA.
APPEND SELTAB_WA TO SELTAB.
ENDLOOP.
CALL FUNCTION 'LDB_PROCESS'
EXPORTING
LDBNAME = 'F1S'
VARIANT = ' '
EXPRESSIONS = TEXPR
FIELD_SELECTION = FSEL
TABLES
CALLBACK = CALLBACK
SELECTIONS = SELTAB
EXCEPTIONS
LDB_NOT_REENTRANT = 1
LDB_INCORRECT = 2
LDB_ALREADY_RUNNING = 3
LDB_ERROR = 4
LDB_SELECTIONS_ERROR = 5
LDB_SELECTIONS_NOT_ACCEPTED = 6
VARIANT_NOT_EXISTENT = 7
VARIANT_OBSOLETE = 8
VARIANT_ERROR = 9
FREE_SELECTIONS_ERROR = 10
CALLBACK_NO_EVENT = 11
CALLBACK_NODE_DUPLICATE = 12
OTHERS = 13.
IF SY-SUBRC <> 0.
WRITE: 'Exception with SY-SUBRC', SY-SUBRC.
ENDIF.
FORM CALLBACK_SPFLI USING NAME TYPE LDBN-LDBNODE
WA TYPE SPFLI
EVT TYPE C
CHECK TYPE C.
CASE EVT.
WHEN 'G'.
WRITE: / WA-CARRID, WA-CONNID, WA-CITYFROM, WA-CITYTO.
ULINE.
WHEN 'L'.
ULINE.
ENDCASE.
ENDFORM.
FORM CALLBACK_SFLIGHT USING NAME TYPE LDBN-LDBNODE
WA TYPE SFLIGHT
EVT TYPE C
CHECK TYPE C.
WRITE: / WA-FLDATE, WA-SEATSOCC, WA-SEATSMAX.
ENDFORM.
Regards,
Sumit.
Message was edited by: sumit kumar
Message was edited by: sumit kumar -
ORACLE 10g Reports- how to hide the parameter screen
QUESTION:
: I have a report that was designed in 6i. It has a parameter screen. Now I converted the report to 10g and pass parameters to the report from a form. Therefore the 6i parameter screen is not required. However, when I look into the report editor PAPER PARAMETER FORM icon, the old 6i parameter layout appears.
HOW do I stop the 6i parameter screen from appearing? I dont need it anymore since the parameters are passed in from a form.Hi,
Do this
Go to DevSuiteHome_1\reports\conf\cgicmd.dat
this file contains theMapping file for Oracle Reports
see this link
how to hide url (use, password and db) in oracle 10g -
How to hide the selection-screen Begin of Block
Hi,
I copied the standard program into my new 'Z' prog.
But i dont need a selection-screen begin of block and end of block i.e. I have to hide the entire block from the output screen.
I can delete the selction-screen block , but the field which is present inside the block is used in several places of program
and i dont know the purpose of the fields.
Can any one help me to hide the block.
Thanks in advanced
Regards,
DarshanaHi
Use keyword NO-DISPLAY with the select options or parameter which u want to hide in the selection screen.
No need to comment statements Begin of block or end of block.
SELECTION-SCREEN BEGIN OF BLOCK ss_01 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_month FOR isellist-month no-display .
PARAMETERS: p_email LIKE somlreci1-receiver no-display.
SELECTION-SCREEN END OF BLOCK ss_01.
It will work this way.
Thanks -
I cannot figure out how to hide the bookmark/reading list column
I UPDATED MY OSX ON 09/26/14 TO THE NEW 10.9.5. AT THE SAME TIME I UPDATED MY SAFARI SERVER TO 7.1. HOW DO I DO CHANGE FOR THE FOLLOWING NEW ISSUE? THE SIZE OF THE FONTS HAVE CHANGED UNDER MY DESKTOP FOLDERS. WINDOWS DO NOT OPEN TO FULL SCREEN AND I CANNOT FIGURE OUT HOW TO HIDE THE BOOKMARK/READING LIST COLUMN TO THE LEFT OF THE WINDOW WHICH IS HIDING THE WINDOW UNDERNEATH,
<Re-Titled By Host>did your CAPSLOCK get stuck on too? ccc
-
I am trying to send an email to a group which I have created in my contacts. I would like to hide the list of email addresses but cannot see how to do this. Can anyone help please?
Thank you for your message.
I can see how you do that when using the 'normal' emailing system from my mailing box, but not when working from the contact application (the 'book' on the bottom icon bar with the @ on it).... -
How to hide variant configuration screen in sales order
Hi Friends,
Could you please help : how to hide variant configuration screen in sales order for a configured material
RanjanHi
The very purpose of VARIANT CONFIGURATION is to for this material these are the characteristics available
In this you choose one characteristic then these are the values available
If you make a choice then this is the price
Means Maruthi car is the product
Say 800
Alto
Zen
These are characteristics
In this you choose say black, cherry red, white these are the values
When you put a sales order for Maruthi car then if it is 800 black colour then price is X
if it is 800 white colour then price is y
So that according to the choice of the customer the pricing and other details are fetched
Why do you want to defeat the very purpose of VARIANT CONFIGURATION
Rather than listing out of the whole product list the system simplifies the thing
Without that popup variant configuration is meaningless
Regards
Raja
Edited by: ramanathan raja on Dec 11, 2008 3:48 PM -
How to hide the field from the view in the webdynpro application?
Hi Gurus,
I got a requirement where in which ,default layout has the field name Time.......To......... which is (2 input box ) and one lable assigned to the container.........
Now my requirement is to hide this field from the layout for all cases of leave......(all types of leave)....
I got a few inputs from forum that we can achieve this by implementing the following steps..........
Create In context => Value attribute => Say Visibility
Go to its properties
Select com.sap.ide.webdynpro.uielementdefinitions.Visibility
In View Layout
Select UI Element Set Visible property to this context variable Visibility.
In wdDoModifyView() You can set this property to false
wdContext.currentContextElement().setVisibility(false);
Can you people tell me where to create the value attribute........
In the view context or in the component context...........
and field that am talking about is assign to the container you want me to assign this context variable property to all ......Like to input box ,label and the container..........
Please calrify this ASAP...........
Thanks in Advance,
DharaniHi Manoj......
Hi Murutuza,
As per your guidelines I have created the value attribute in View context (which has the field..... which needs to be hide)inside the value node say FieldVisibility.......and attribute name OldTimeDuration......and I set this value with uidefeneitions Visibility .......
and I bind this vaule with the field property visible(Time.......To..........)which I need to hide...........
Now in the view implementation tab ..........I have coded in the doinit method(since my requirement to hide the field from the layout in all cases).........
wdContext.currentFieldVisibilityElement().setOldTimeDuration(WDVisibility.NONE);
But if I deploy the application and see still am getting the same field dispalying in the screen.........
I even tried putting this code in wdmodifyview method.........same results........
Kindly tell me how to hide the field permenantly from the screen............(without any conditions.)
Thanks in Advance,
Dharani -
How to suppress the Selection Screen of Logical Database
Hi,
I am using one Logical Database for my report.
I want to show my customized selection Screen.
How can I hide the Selection Screen of Logical Database?Hi,
Check the attributes of the report program where you assign the LDB. You can see the parameter Selection Screen press the F4 and check the LBD is provided any Blank screen or not.
For some LDB's you can find the Report Category in the attribute section of the report. either you can create the new screen or standard screen might be provided with Blank.
Check there ..
If you don't find you can use LOOP AT SCREEN..ENDLOOP to hide the fields of LDB.
Which LDB you are using. -
How to hide the select-options fields on radiobutton select in webdynpro
hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement belowHi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k -
How to hide Jump list's Tasks in Windows 7 using userChrome.css
How to hide Jump list's Tasks in Windows 7 using userChrome.css
Try to disable some browser.taskbar.*enable prefs on the about:config page.
* http://kb.mozillazine.org/about%3Aconfig -
How to hide the title caption of the column
Hi friends,
Can i hide the title caption of a column in a matrix. In my matrix there is only one column. i need to display its like a list box. Any one know how to hide the title caption of the column
ThanksHi Muna,
this is a c# code how you clear the title from a column:
((SAPbouiCOM.Matrix)(oForm.Items.Item("mtxUID").Specific)).Columns.Item("ColUID").TitleObject.Caption = "";
lg David -
How to print the list shown in the finder
I work as a photographer. For my clients I burn the pictures on DVD / CD.
Some of my clients want a indexprint from the folder on the disk.
How can print the list wich is shown in the finder? A screenshot doesn't work because there are often more items in the folder than the screen shows.
A friend told me this isn't possible in OS X. In OS9 this function was available, but removed in OS X.... ?
Regards
Walter
G5 Dual Mac OS X (10.4.8) also Intel ImacHi Walter,
To make a list, choose all (COMMAND + a) in the window than "copy" and "paste" to TextEdit or MS Word, or directly into email.
Also, If you drag a folder or entire volume onto the Print Setup Utility it will print it's contents.
-mj
[email protected] -
How to hide OM infotype screen field
Hello Experts.
Please let me know how to hide OM infotype Screen field ? i want to hide Percentage field on IT1011.
I know i can create alternative screen "Z" and hide the field and attach alternative screen to the Module pool.
Please let me know if i can do this using BADI so there will not be any change to standard.
Regards,
SaurabhHi Shiva,
To get the detail about a table filed you can use DDIF* function module.
Here in this particular case you can use FM DDIF_FIELDINFO_GET.
Pass the table name & field name.
After executing that FM you can check DFIES_TAB in Tables parameter. i t will be having an entry.
Check for filed name as KEYFLAG , if it is not initial ie. X then supplied filed is Primary Key.
If KEYFLAG is initial then supplied filed is not a primary key.
Thanks & Regards
Satyam
Maybe you are looking for
-
USB 2.0 Mass Storage Device mounting issues and cannot write data on it
I have a 250 GB external Simpletech Hard Drive (with a USB 2.0 interface). It works flawlessly in a Windows XP environment (strange!!). But when I connect it to my iMac thru the USB port 2 things happen: 1. Sometimes it mounts, sometimes it does not.
-
User Exit or BADI for Updating Tax code (MWSKZ) using ME21N
Hi all, I am trying to fin out an exit or badi for Updating Tax code (MWSKZ) and Unit of Measure in transaction ME21n. The scenario is like this... For Purchase Orders Tax code will be defaulted from Purchasing info record or contract or parameter id
-
Server 2008 R2 Service Pack 1 Known Issues
About to deploy sp1 and try this hotfix for the dns server that stops responding. Are there any known major issues to look for with service pack 1 on server 2008 sp1? I have exchange 2010 running on it also and its the domain controller... "i know no
-
Best practice for low bandwidth end-users
Hey guys, I'm new to CS and am about halfway through my planning stages for a web app. My end users will be predominantly on 256k-512k connections (yeh I know it sucks, but this is regional/rural Australia) and a fairly large proportion of those are
-
I'm trying to edge up to the iphone 6 from the 5s, but the website says that I can't because the phone I've selected (the only iphone 5s on the account) is not the original device. Well, it is, I have no replaced it or anything since I signed my edge