How to identify Draft Number of PO

Hi Friends,
                 I want to know about how to identify Draft number.When Draft get opened its shows DocEntry in PO .And if i will not add that draft and generate another draft then similar number get shown on PO.And in ODRF table also its stored same number.
     So how can I identify which draft number gets Opened??
Thanks & Regards
     Swati

Hi Vasu,
     I have added one folder in PO.In that Folder I have added one Matrix to add some information.So When PO gets added the all data of that matrix get added into my table.
   But now problem is when PO sent for Approval its converted into Draft.So My Problem is ,The person who Approve that PO he is not able to show Data which I have added into Matrix of new Folder. So to show the Data to him I want Draft Number.
   This PO draft is not added so I cant use Draftkey form table.And there are lots of similar PO number entries in ODRF table so how can I identify which Draft gets Open at a time of Load??
Thanks & Regards,
    Swati

Similar Messages

  • How to identify the number of clients in server

    Hai
    Iam trying a network program to identify the number of clients which accessing the server. I dont no how to identify the number of clients which accessing the server through server machine. I want to identify the client machine ip or name. If you have any idea help for me.
    Regards
    A.KRaj

    You can keep a ArrayList of active connections and store the IP address of the incoming connection in the Server. You have to do this everytime you accept a connection.

  • Satellite M300 - How to identify model number?

    Hi All,
    Anyone know how to identify my model number? On the bottom it says model is PSMD4L-O1E00C and serial is 48188716W but when i go to http://gedb.toshiba.com which should tell me the model number for using on the website for drivers etc. it says - Invalid Model/Serial Combo, could not find this in our Database. Please try again
    Ive tried all combinations in case the O are zeros or O's any ideas?
    Its a satellite M300 I bought in Singapore

    Hi
    To be honest I never saw this Toshiba website
    Normally the numbers are correct because I have compared with my notebook.
    However, why do you dont download the drivers on the Toshiba Asia website? There I have founded your model code, PSMD4L:
    http://www.pc.toshiba-asia.com => Services & Support

  • How to identify the number of unique active users/connections on PIX/ASA

    Hi,
    Is it at all possible with SNMP or other tools to identify the unique number of connections on PIX or ASA. I’m not referring to the number of session or the results of “show conn count” but rather something similar to what “show local host” command will provide.
    Thanks in advance

    Hi,
    If  you are looking for SNMP OIDs to get 'show local-host' output from ASA, please try the following OIDs and check if you are getting the relevant outputs :
    1.3.6.1.4.1.9.9.147.1.1.1.2.1.5.        cfwBasicConnectionEventType
    1.3.6.1.4.1.9.9.147.1.2.2.2.1.3.        cfwConnectionStatDescription
    1.3.6.1.4.1.9.9.147.1.2.2.2.1.4.        cfwConnectionStatCount
    1.3.6.1.4.1.9.9.147.1.2.2.2.1.5.        cfwConnectionStatValue
    Thanks

  • Preview Draft Number in PLD Outgoing Payment

    Hi All,
    Anybody know how to preview draft number (field docentry, table OPDF) in PLD Outgoing Payment?
    and how to link payment draft report(OPDF) with outgoing payment (OVPM)?
    Thank U all.
    Regards,
    Ratna

    Hi Ratna,
    You may check these threads:
    Re: Print Draft Number on an AR Invoice
    Re: Print Layout Designer
    PO Draft no. and associated actual PO no.
    Thanks,
    Gordon

  • Identify the number server calls using java

    how to identify the number server calls that are made for rendering the page, Also have each call transmission data too.using java language.

    What??? What are you talking about? What environment? What server?

  • How to identify migrated rows on a table

    Hi, folks,
    I'm wondering how to identify migrated rows on a table.
    I understand that ANALYZE generates data into CHAINED_ROWS. The Oracle document implies that this table has both CHAINED ROWS and MIGRATED ROWS. FYI:
    http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14231/general.htm#sthref1881
    But how can I tell migrated rows from chained rows.
    Thanks!
    Alex

    im also not looking to ExporttoExcel feature on ADF just copy all the records displayed on a table
    im also not looking to ExporttoExcel feature on ADF just copy all the records displayed on a table ,
    Hi you can set the property( exportedRows) of exportListener
    you can limit the number of rows to download
    chekout documentaion
    ADF RichClient API - af:exportCollectionActionListener

  • How to identify toll free numbers in CUCM

    Hi 
    I am new to this Cisco VOIP system.
    My Company has many toll free numbers. I need to know where can I find the toll free number details. I had a request today to alter few settings in them. But I dont know what to do and where to do. 
    Eg : 800326xxxx is the number. Request is - When people call in, they have to press 1 for billing and 2 for sales and 3 for enquiry and 4 for voice mail. 
    How do I go for it. Where should I start. 
    Again As I am new, I really appreciate if someone could explain how to identify these toll free numbers in this cisco system and help me in this request with simple steps and simple english. THanks.
    Deva

    Usually the toll free number resides at the service provider and they just translate that number into one of your DIDs.   You can either look through documentation or call the service provider to ask which 1800 numbers map to which DIDs.   From there it sounds like you'll need to investigate call handlers in your voicemail system correlated to that DID.

  • How to identify which server are connected in a switch?

    Hi,
    Many servers are connected to a switch?
    How to identify what server are connected to which port remotely?
    Thanks!
    Samuel

    Hi Sam,
    just issue the command show ip arp , it will display some thing like this for know the MAC address & the VLAN number.
    Protocol Address Age (min) Hardware Addr Type Interface
    Internet 10.2.1.18 9 0800.6913.710e ARPA Vlan2
    to know on which port it is connected, just issue the command as mentioned below
    sh mac-address-table address 0800.6913.710e
    Mac Address Table
    Vlan Mac Address Type Ports
    2 0800.6913.710e DYNAMIC Po1
    hpe this will help you to identify your servers.
    rate this post.

  • How to identify a One time Customer in Oracle Apps AR

    Hello,
    How to identify a One time Customer In Oracle APps AR?
    Is it possible to find out how many number of transactions a Customer does so that, if the number of transactions is 1, then that customer is a one time customer. or else he is not?
    Thank you
    Bob

    Hi Bob,
    to my knowledge, i cannot recollect a seeded report from oracle that could meet your requirement. You can try running the Transaction Register report from your Go live date till now, so that system would generate a list of all the Invoices along with the Customer Name, then you could export this to excel and perform a sort, filter and groupby to get the desired result ....
    However if you are a person with technical expertise, check the table RA_CUSTOMER_TRX_ALL this stores all the transaction related information ..... you can select TRX_NUMBER, BILL_TO_CUSTOMER_ID from this table and perform a count by customer...(I am not sure on the syntax and usage of sql functions) you can get the desired results ...
    Also in future, while creating a new customer if you know well in advance that this customer is going to be an ONE TIME CUSTOMER, there you could capture that information in any unused field on the customer configuration or can enable a DFF and capture this information, so it becomes very easy to identify such customers or have a report built based on it...
    I assume there is an objecive behind trying to find One time customers or customers with a single transaction history ... are you planning to disable/end date/inactivate such customers ....?
    Regards,
    Ivruksha

  • How to identify offseting account

    Dear friends
    i am creating zreport in which i have some query related to offsetting account.
    please find some details.
    while viewing GL account in FBL3N ,
    we found different document numbers
    aginst these document number there is an offsetting account
    in certain document offsetting account is GL account number
    while in other it is Vendor code
    How system identify that for perticular document
    which type of offsetting account comes.
    is there any table for that??
    or any function module??
    or any logic for that??
    Regards
    Avirat

    Hi
    See the article [Offsetting Account Display in FBL Reports|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2074877d-fad9-2d10-c69b-f47fb0685327?QuickLink=index&overridelayout=true] by Praveen.J in this site.
    I hope this helps you
    Regards
    Eduardo

  • Why Tran.Request is not generated in some cases?How to identify such case ?

    Hello Support,
    In some cases
    Eg;
    1. Defining number ranges we normally do not create a Transport Request.
    2. Maintaining characteristics values for each characteristic incase of Release Strategy
    Is there any method by which we can find out the areas where we are not required to create Transport Request? If Yes , please let me know the steps involved in identifying the same .
    Also let me know what do you mean by open Client . Thanks in advance.
    Regards
    Ramesh Ch

    Hi Juergen ,
    Is there any method by which we can find out the areas where we are not required to create Transport Request? ( How to identify the areas where Transport request is not generated ) .
    If Yes , please let me know the steps involved in identifying the same .
    Also let me know what do you mean by open Client . Thanks in advance.
    Regards
    Ramesh Ch

  • How to Identify incoming and outgoing IDOC in the system for last one year.

    Dear All,
    How to Identify incoming and outgoing IDOC in the system for last one year.
    Regards
    Ashok

    Dear Anindya,
    I used WE05 the result by giving direction outbound.Then on created field i put the value date.I m getting the output in the no of idoc number.
    This is only the way to identify?
    Thnx
    Ashok
    Edited by: ashok singh on Oct 22, 2009 8:40 AM

  • How to identify faulty 350 APs

    Hi.
    I am managing a large number of access points placed at hotspots (hotels) at remote sites. A large number of these are old 350 points , and i suspect that some of them are not working as they should. Some are not carrying any traffic at all, and in the statistics for the TX-Radio all counters are 0, but there are no alarms/traps from the APs.
    I suspect that eiter the radio RX or TX is faulty.
    I can access the APs via GUI and SNMP.
    Does anybody have an idea how to identify which APs are faulty without actually visiting the site?

    Are they vxworks or have they been converted to IOS. If they are IOS, you can capture logs, run some debugs, etc if you can telnet to them and that may give you some more info.

  • Urgt:How to identify TOP 5 SQL using more CPU time  without using statspack

    How to identify the TOP 5 SQL queries which are consuming more CPU time during the timespan of 24 hours for entire database. There are N number of users who have issued sql queries, out of which few users have disconnected and few user are still connected to the database(I need to consider all sessions). My database version is 9.0.1. I don't want to use statspack. Is there any way to identify TOP 5 SQL consuming more CPU time without affecting the performance of the database. Can any one help me on this? Its urgent!!. I don't want to use statspack becasue it degrades the performance and i cannot afford to run it for 24 hours.

    You don't run statspack for 24 hours, that would infact be pointless...
    Run statspack for say a 10 or 15 minute window during a particular "busy" period on your database. If you run it for longer then all the useful data will have been "averaged out". You want a snapshot in time, not an average over the day.

Maybe you are looking for