How to implement virtual firewalls in this scenario?
One question for this scenarios
THere are two Physical Firewalls 5510 with 4 interfaces.
Firewall01
Interface 1 connected to ISP01 (outside)
Interface 2 connected to Inside network (LAN)
Interface 2 and 4 connected to two some intranet partners.Firewall 02
Interface 1 connected to ISP02 (outside)
Interface 2 connected to Inside network (LAN)So my question is:
Could i implement 2 Virtual FIrewalls on only one of the physical firewall, and implement services of virtual firewalls the same as the physical one?
So could i designate a physical interface, to more than one virtual firewall?If possible, i could implement Active/Pasive on two physical ones, and have all the configuration as in actual schema.
Let me know, regards!
You can configure multiple virtual firewalls in one physical ASA, it is called multiple context firewalls in ASA.
You can configure Active/Standby failover in 2 ASAs, and with multiple context mode, it is called Active/Active failover. It means that you can have for example Context A and B active on ASA-1 and Context C active on ASA-2, and Context A and B standby on ASA-2, and Context C standby on ASA-1.
Here is some sample configuration for your reference:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080834058.shtml
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808d2b63.shtml
Hope that helps.
Similar Messages
-
How to use Oracle Spatial in this scenario
My scenario is like that:
I'm very new to Oracle Spatial
I'm building an application that will be based on asp.net.(I am
confident about .net)
As per my client requirement there are some kml file in one archive
folder.
Let me give an example:
say there is a kml file for region A.(latitude say 36 n to 40 n and
longitude is 110 w to 115 w) already in the archive folder.
Now if a new kml file(say A1.kml) that has been created by the user
and say its latitude and longitude are respectively 37n and 112w. As we clicked A.kml, google earth is opened up for the region A and as
we move our mouse cursor to more deeper more polygons are visible.
eventually polygon for A1.kml is also visible and definitely which is
inside the polygon for region A.
How can I achieve this thing by using oracle spatial 10g? ---(it's one of my senior's advice to use "oracle spatial 10g" in this scenario)
I'm not too sure whether I can able to make it clear to u about my
situation; plz xcuse me if I'm wasting ur valuable time.Hi,
This link helped me a lot!
http://www.oracle.com/technology/pub/articles/rubio-mashup.html
Hope it could help you too.
Best regards,
Luiz -
How to implement virtual hosts
Hi all,
I have developed my own application server in java using RMI.
I would like to implement a mechanism to allow the definition of virtual hosts as other products such as Resin or JBoss do, but I cannot find where to look for some example...
Has anybody an idea abut this?
Thanks in advanceImplimentation is up to you what you have to find out is how the clinet-server interface identifies the which Virtual Host to use.
I think that you should read Protocole specifications for that -
How to Implement simple Timer in this code
Hi there guys,
This is a small ftp client that i wrote. It has encryption and all bulit into it. I want to initiate the sendfile function every 5 minutes.
The program starts with the displaymenu function wherein a menu with various options is displayed.
How Do i Do that? I went online and tried doing it myself but cud not possibly think of a reason as to why my changes were not working.
Here is the basic code. I earnestly hope that some of you guys out there will help me. This is a very simple problem and sometimes it is the finer point that eludes us. any help will be deeply appreciated
import java.net.*;
import java.io.*;
import java.util.*;
import java.lang.*;
import javax.crypto.*;
import java.util.regex.*;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.PBEParameterSpec;
import java.security.spec.AlgorithmParameterSpec;
import java.security.spec.KeySpec;
class FTPClient
public static void main(String args[]) throws Exception
Socket soc=new Socket("127.0.0.1",5217);
transferfileClient t=new transferfileClient(soc);
t.displayMenu();
class transferfileClient
Socket ClientSoc;
DataInputStream din;
DataOutputStream dout;
BufferedReader br;
transferfileClient(Socket soc)
try
ClientSoc=soc;
din=new DataInputStream(ClientSoc.getInputStream());
dout=new DataOutputStream(ClientSoc.getOutputStream());
br=new BufferedReader(new InputStreamReader(System.in));
catch(Exception ex)
//encrypto routine starts
class DesEncrypter {
Cipher ecipher;
Cipher dcipher;
// 8-byte Salt
byte[] salt = {
(byte)0xA9, (byte)0x9B, (byte)0xC8, (byte)0x32,
(byte)0x56, (byte)0x35, (byte)0xE3, (byte)0x03
// Iteration count
int iterationCount = 19;
DesEncrypter(String passPhrase) {
try {
// Create the key
KeySpec keySpec = new PBEKeySpec(passPhrase.toCharArray(), salt, iterationCount);
SecretKey key = SecretKeyFactory.getInstance(
"PBEWithMD5AndDES").generateSecret(keySpec);
ecipher = Cipher.getInstance(key.getAlgorithm());
dcipher = Cipher.getInstance(key.getAlgorithm());
// Prepare the parameter to the ciphers
AlgorithmParameterSpec paramSpec = new PBEParameterSpec(salt, iterationCount);
// Create the ciphers
ecipher.init(Cipher.ENCRYPT_MODE, key, paramSpec);
dcipher.init(Cipher.DECRYPT_MODE, key, paramSpec);
} catch (java.security.InvalidAlgorithmParameterException e) {
} catch (java.security.spec.InvalidKeySpecException e) {
} catch (javax.crypto.NoSuchPaddingException e) {
} catch (java.security.NoSuchAlgorithmException e) {
} catch (java.security.InvalidKeyException e) {
// Buffer used to transport the bytes from one stream to another
byte[] buf = new byte[1024];
public void encrypt(InputStream in, OutputStream out) {
try {
// Bytes written to out will be encrypted
out = new CipherOutputStream(out, ecipher);
// Read in the cleartext bytes and write to out to encrypt
int numRead = 0;
while ((numRead = in.read(buf)) >= 0) {
out.write(buf, 0, numRead);
out.close();
} catch (java.io.IOException e) {
public void decrypt(InputStream in, OutputStream out) {
try {
// Bytes read from in will be decrypted
in = new CipherInputStream(in, dcipher);
// Read in the decrypted bytes and write the cleartext to out
int numRead = 0;
while ((numRead = in.read(buf)) >= 0) {
out.write(buf, 0, numRead);
out.close();
} catch (java.io.IOException e) {
} //encryptor routine ends
void SendFile() throws Exception
String directoryName; // Directory name entered by the user.
File directory; // File object referring to the directory.
String[] files; // Array of file names in the directory.
//TextIO.put("Enter a directory name: ");
//directoryName = TextIO.getln().trim();
directory = new File ( "E:\\FTP-encrypted\\FTPClient" ) ;
if (directory.isDirectory() == false) {
if (directory.exists() == false)
System.out.println("There is no such directory!");
else
System.out.println("That file is not a directory.");
else {
files = directory.list();
System.out.println("Files in directory \"" + directory + "\":");
for (int i = 0; i < files.length; i++)
String patternStr = "xml";
Pattern pattern = Pattern.compile(patternStr);
Matcher matcher = pattern.matcher(files);
boolean matchFound = matcher.find();
if (matchFound) {
dout.writeUTF("SEND");
System.out.println(" " + files[i]);
String filename;
filename=files[i];
File f=new File(filename);
dout.writeUTF(filename);
String msgFromServer=din.readUTF();
if(msgFromServer.compareTo("File Already Exists")==0)
String Option;
System.out.println("File Already Exists. Want to OverWrite (Y/N) ?");
Option=br.readLine();
if(Option=="Y")
dout.writeUTF("Y");
else
dout.writeUTF("N");
return;
System.out.println("Sending File ...");
// Generate a temporary key. In practice, you would save this key.
// See also e464 Encrypting with DES Using a Pass Phrase.
System.out.println("Secret key generated ...");
// Create encrypter/decrypter class
DesEncrypter encrypter = new DesEncrypter("My Pass Phrase!");
// Encrypt
FileInputStream fino=new FileInputStream(f);
System.out.println("Initialised ...");
encrypter.encrypt(fino,
new FileOutputStream("ciphertext.txt"));
System.out.println("generated ...");
fino.close();
FileInputStream fin=new FileInputStream("ciphertext.txt");
int ch;
do
ch=fin.read();
dout.writeUTF(String.valueOf(ch));
while(ch!=-1);
fin.close();
boolean success = (new File("ciphertext.txt")).delete();
if (success) {
System.out.println("temp file deleted .../n/n");
for (int j = 0; j < 999999999; j++){}
}//pattermatch loop ends here
else
{ System.out.println(" " + "Not an XML file-------->" +files[i]); }
}// for loop ends here for files in directory
}//else loop ends for directory files listing
System.out.println(din.readUTF());
}//sendfile ends here
void ReceiveFile() throws Exception
String fileName;
System.out.print("Enter File Name :");
fileName=br.readLine();
dout.writeUTF(fileName);
String msgFromServer=din.readUTF();
if(msgFromServer.compareTo("File Not Found")==0)
System.out.println("File not found on Server ...");
return;
else if(msgFromServer.compareTo("READY")==0)
System.out.println("Receiving File ...");
File f=new File(fileName);
if(f.exists())
String Option;
System.out.println("File Already Exists. Want to OverWrite (Y/N) ?");
Option=br.readLine();
if(Option=="N")
dout.flush();
return;
FileOutputStream fout=new FileOutputStream(f);
int ch;
String temp;
do
temp=din.readUTF();
ch=Integer.parseInt(temp);
if(ch!=-1)
fout.write(ch);
}while(ch!=-1);
fout.close();
System.out.println(din.readUTF());
public void displayMenu() throws Exception
while(true)
System.out.println("[ MENU ]");
System.out.println("1. Send File");
System.out.println("2. Receive File");
System.out.println("3. Exit");
System.out.print("\nEnter Choice :");
int choice;
choice=Integer.parseInt(br.readLine());
if(choice==1)
SendFile();
else if(choice==2)
dout.writeUTF("GET");
ReceiveFile();
else
dout.writeUTF("DISCONNECT");
System.exit(1);here is a simple demo of a Timer usage.
public class Scheduler{
private Timer timer = null;
private FTPClient client = null;
public static void main(String args[]){
new Scheduler(5000);
public Scheduler(int seconds) {
client = new FTPClient();
timer = new Timer();
timer.schedule(new fileTransferTask(), seconds*1000);
timer.scheduleAtFixedRate(new FileTransferTask(client), seconds, seconds);
public class FileTransferTask extends TimerTask{
private FTPClient client = null;
public FileTransferTask(FTPClient client){
this.client = client;
public void run(){
client.sendFile();
public class FTPClient{
public void sendFile(){
// code to send the file by FTP
}the timer will will schedule the "task": scheduleAtFixRate( TimerTask, long delay, long interval)
It basically spawn a thread (this thread is the class that you
implements TimerTask..which in this example is the FileTransferTask)
The thread will then sleep until the time specified and once it wake..it
will execute the code in the the run() method. This is why you want to
pass a reference of any class that this TimerTask will use (that's why
we pass the FTPClient reference..so we can invoke the object's
sendFile method). -
How to implement the grid like this?
Dear All:
I have this grid view as following the sketch :
|DS1|DS2|DS3|DS4|
|------|------|------|------|
|sss |sss |sss |sss |
|sss |sss | sss |sss|
| -----|------|------|------|
|DS5|DS6|DS7|DS8|
|------|------|------|------|
|sss |sss |sss |sss |
|sss | sss|sss| sss |
Note:
1. the border is solid line and "sss" represents white space.
2. might have multiple rows or columns like this pattern.
3. smaller cells are labels and bigger cells are filled with a few different colors
4. when hovering mouse on each bigger cell, the tool tip text will be shown.
5. sizes of the cells are fixed and not changed when the container is resized.
Any clue for implementation? I appreciate all for reply.
JohnosnUse a JTable. If your data is algorithmically derived, consider implementing your own TableModel. You may need to implement your own TableCellRenderer.
-
How can I stop sounds in this scenario
Hello, I need help.
I need to load in an external .swf file into my new movie and
stop the sound/music that is playing from the external swf file. I
need the sound/music to stop immediately on frame one. I don't have
the fla to the external swf file as it is years old. Can someone
help me with this? I know there is "stopallsounds();" but I don't
think I'm using it right because it won't stop the sound when I
play the new exported swf.
So to recap - I've loaded in a .swf on frame one (into a
blank movie clip) - and on another layer tried to add the
"stopallsounds();" action - music still plays - HELP!xMrMoox wrote:
> Hello, I need help.
>
> I need to load in an external .swf file into my new
movie and stop the
> sound/music that is playing from the external swf file.
I need the sound/music
> to stop immediately on frame one. I don't have the fla
to the external swf
> file as it is years old. Can someone help me with this?
I know there is
> "stopallsounds();" but I don't think I'm using it right
because it won't stop
> the sound when I play the new exported swf.
>
> So to recap - I've loaded in a .swf on frame one (into a
blank movie clip) -
> and on another layer tried to add the "stopallsounds();"
action - music still
> plays - HELP!
Load the swf in movie clip holder and give it instance name
"someNameHere",
than use the sound object to define the instance name as
Sound Object's target
and use the regular volume control to mute it. By setting it
that way you control
the movie clip volume (holder mc) and anything within.
s = new Sound(someNameHere);
s.setVolume(0);
to play it back ON
s = new Sound(someNameHere);
s.setVolume(100);
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
How to write a DTD for this scenario?
hi,
consider the following xml
<set after = "A">
<item name="A" ></item>
<item name="B" ></item>
</set>
The DTD for the "item" element is
<!ATTLIST item name (A | B| C| D| E ) #REQUIRED >
The attribute "after" of "set" can hold a single valid name like
<set after = "A">
or
a collection of valid names seperated by coma like <set after = "A,B,C">
how to write DTD for the "after" attibute such that it will contain a single valid name or collection of names?
Regards,
Ajay.I could be wrong, but I'm pretty sure that DTD doesn't support that. You're probably better off declaring the name attribute to be of type PCDATA and tokenizing the value manually in code.
-
How to open multiple instances in this scenario...
private sub Add()
Try
creationPackage = SBO_Application.CreateObject( _
SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
'creationPackage.UniqueID = "Form503"
'creationPackage.FormType = "Form503"
'creationPackage.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Fixed
oxmldoc.Load(spath & "\" & "Screen3.srf")
creationPackage.XmlData = oxmldoc.InnerXml
'add the form to the sbo application
oForm = SBO_Application.Forms.AddEx(creationPackage)
oForm.Items.Item("7").Specific.DataBind.SetBound(True, "@VIDS_MGT", "Code")
oForm.Items.Item("8").Specific.DataBind.SetBound(True, "@VIDS_MGT", "Name")
oForm.Items.Item("9").Specific.DataBind.SetBound(True, "@VIDS_MGT", "U_ShelfNumber")
oForm.Items.Item("10").Specific.DataBind.SetBound(True, "@VIDS_MGT", "U_SpaceNumber")
oForm.DataBrowser.BrowseBy = "7"
oForm.Visible = True
Catch ex As Exception
End Try
end subthanx for ur reply....
i tried this code..but not working..plz help me in writing the code
dim formcount as integer = 1
Try
creationPackage = SBO_Application.CreateObject( _
SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
creationPackage.UniqueID += formcount.ToString
'creationPackage.FormType = "Form503"
'creationPackage.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Fixed
oxmldoc.Load(spath & "\" & "Screen3.srf")
creationPackage.XmlData = oxmldoc.InnerXml
If (oForm.UniqueID = formcount) Then
''''what should i write here...
End If
oForm = SBO_Application.Forms.AddEx(creationPackage)
oForm.Items.Item("7").Specific.DataBind.SetBound(True, "@VIDS_MGT", "Code")
oForm.Items.Item("8").Specific.DataBind.SetBound(True, "@VIDS_MGT", "Name")
oForm.Items.Item("9").Specific.DataBind.SetBound(True, "@VIDS_MGT", "U_ShelfNumber")
oForm.Items.Item("10").Specific.DataBind.SetBound(True, "@VIDS_MGT", "U_SpaceNumber")
oForm.DataBrowser.BrowseBy = "7"
oForm.Visible = True
Catch ex As Exception
End Try -
How to implement the function like this?
I'm sorry, don't know why the previous post was approved then deleted.
User visit http://aa.com/show?id=1 then the player plays 1.swf
User visit http://aa.com/show?id=2 then the player plays 2.swf
User can only see the url id, but can't see which swf is played.
Should I build a FMS server and a player embed in the browser? Thanks,it disappeared because both links are for the same american arilines page which makes it appear as if you're posting spam on behalf on aa and your question is only superficially related to flash.
anyway, to use query strings to determine what to show on a web page (or which web page to show), the window.location string contains the full url. among the ways you can use that to retrieve the query string is:
<script>
var qs=window.location.substring(window.location.indexOf("?")+1);
if(qs=='id=1'){
//window.location=embedding html for 1.swf
} else if(qs=='id=2'){
//window.location=embeddign html for 2.swf
</script> -
How fast should FW800 be in this scenario?
I am copying 778gb from a ProVid Z 1tb Raid drive to an OWC Elite 2tb drive obviously using FW800 and I'm getting about 16mb a sec. Even though I'm copying from drive1 to drive2 on the same channel shouldnt I expect to be closer to 25-40mb per second?
The total copy time started at 15 hours.
No other firewire devices connected to FW400 or the 800.
Any input, suggestions or reading material suggestions greatly appreciated....Transfer rates are entirely dependent on the average size of files being transferred. A lot of small files slow down the transfer rate considerably. The 25-40 MB/s you state (closer to 25) would more typically be for files averaging 256 KBs, whereas for what you are transferring the average may be closer to 4 KBs.
-
How to setup RDP or VDI services in this scenario
Hi there! I've this scenario:
a. 20 thin clients (with OS Windows 7 Embedded Edition)
b. Two physical servers Core1 and Core2, with 64GB of RAM, 2 socket CPU, 8 cores, OS Windows Server 2012 R2, and HyperV roles
c. two domain controllers as child virtual machines with 2 GB running (PDC on Srv1 and BDC on Srv2)
d. ExchangeServer 2013 running as child vm on Core1, with 32 GB RAM.
I've licenses for Windows Server 2008 R2, and Windows Server 2012, and MS office 2013
I want clients, after to connect with RDP, to use outlook 2013 for emails.
Now, i want to setup services for 20 thin clients. This is new for me...and i want your suggestions how to setup up them on this scenario. Have i to use RDP services, or VDI???
Regards!
Lasandro LopezHi,
According to your comment, I can say that Share permissions are automatically set up by the management tools once it will be created. We can use windows PowerShell or server manager to manage UPD. Also remember that User profile disks are for a single collection
only. A user connecting to two different collections will have two separate profiles.
Here providing important link to understand UPD. (You can refer below link for Server 2012 R2)
1. Easier User Data Management with User Profile Disks in Windows Server 2012
2. Working with User Profile Disks on Session-Based Desktop Deployments
Hope it helps!
Thanks. -
Documentation How to use Virtual Key fig.
Hi all ,
Can u please send me Documentation How to use Virtual Key fig. to [email protected]
Nice weekend.check this doc to get a headsup on Virtual objects - though the doc talks abt the virtual char, the procedure is pretty much similar to KF too.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20use%20variable%20time%20references%20in%20currency%20conversion
How to implement Virtual Characteristics or Virtual key figures -
How to implement google search in portal application
Hi,
I am using "http://api.google.com/GoogleSearch.wsdl" file to implement google search in portal application. but i am not able to get the search result. how to implement google search. is this "http://api.google.com/GoogleSearch.wsdl" is vaild now ?. how to achieve the soultion.
Regards,
Shanthakumar.Hi Shanthakumar,
The "GoogleSearch.WSDL" is no longer available as google has replaced it with the new AJAX based searching and they have eventually removed it from public use as well from 7th September 2009. So, I would imagine you would not be able to use the earlier WSDL file for google search. You might have to look in using the new "AJAX Search API". For more information have a look the following links. You can notice "No Longer Available" at the top of the page.
http://googlecode.blogspot.com/2009/08/well-earned-retirement-for-soap-search.html
http://code.google.com/apis/soapsearch/api_faq.html#tech15
I hope this helps you.
Regards,
Gopal. -
How to implement this Scenario(JMS to IDOC)
Hi Frnds,
I am working on one scenario JMS to IDOC .based on JMS Message my XSLT Mapping will genarate Multiple Idocs(max 3) or 2 or one.
I have to send this IDOCS based on some conditions,the conditions mentioned below.
xslt mapping genarats one message ,but this contains 3 IDOCS or 2 or 1.(Order Create , Order Change and Order Response),
what is the best approach to implement this scenario
1)f Order Create segment exists (new PO), first check SAP to see if PO does actually exist using RFC Z_BBPR46_GET_PO_FROM_FPA ,If it does not exist, pass Order Create idoc to SAP to create new purchase order
If it does exist, retrieve PO details from RFC and pass Order Change idoc to SAP to update existing purchase order
2)If Order Change segment exists (change PO), retrieve PO details using RFC Z_BBPR46_GET_PO_FROM_FPA and pass Order Change idoc to SAP to update existing purchase order
3)If Order Response segment exists (goods movement), retrieve PO details using RFC Z_BBPR46_GET_PO_FROM_FPA and pass Order Response idoc to SAP to create goods movement.
Above logic i implemented in one mesage mapping Source is XSLT Mapping Output and Receiver message in message mapping is Multimapping selected 3 IDOCS.
Regards,
rajthanks
-
How to implement Sync-Sync scenario in BPM? Please help!
Hi Experts,
I have a Sync-Sync scenario (SOAP - RFC) where both sender as well as receiver are synchronous.
I have created outbound sender sync interface, abstract sender sync interface, Receiver abstract sync interface and Receiver inbound sync interface.
In BPM I have started with Receive step.
But in receive step I can give either Async Abstract interface or Open Sync-Async bridge. I am confused!
How to implement my scenario in BPM?
It will be really great if somebody can send me the step by step info or doc.
Thanks & Regards,
GopalHi,
Refer this link
use synchronous send step in your BPM - http://help.sap.com/saphelp_nw04/helpdata/en/43/6211331c895f6ce10000000a1553f6/content.htm
RFC Scenario using BPM --Starter Kit
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
regards
Aashish Sinha
PS : reward points if helpful
Maybe you are looking for
-
Getting an error while creating a ERP Quotation from CRM Sales Web-UI.
Hi Experts, I am getting an error while creating a ERP quotation from CRM Sales Web-UI. Here I am enclosing the screen shot. Please give me the solution for this.Thank you in advance. Regards Kishor Kumar.
-
I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even wit
-
Input file is Excel file. Should I need to convert this using the File Content Conversion(File Sender), if so can anyone pls explain me how???? thank you
-
Regarding receiver FILE adapter, REMOTE FTP server
Hi All, The scenario was to get XML file from a local FTP server and to place that XML file in REMOTE FTP server, which we dont have any control over that REMOTE FTP, While executing the scenario it is successfully picked the file and processed and i
-
How can I trigger audio on mouse hover
I know, I know, sound is annoying on webpages but Im building a site that makes it easier for people who cant read to be able to understand the information better, i.e. making it more a accessible. Ive tried using the Javascript method but I couldnt