How to implement Sync-Sync scenario in BPM? Please help!
Hi Experts,
I have a Sync-Sync scenario (SOAP - RFC) where both sender as well as receiver are synchronous.
I have created outbound sender sync interface, abstract sender sync interface, Receiver abstract sync interface and Receiver inbound sync interface.
In BPM I have started with Receive step.
But in receive step I can give either Async Abstract interface or Open Sync-Async bridge. I am confused!
How to implement my scenario in BPM?
It will be really great if somebody can send me the step by step info or doc.
Thanks & Regards,
Gopal
Hi,
Refer this link
use synchronous send step in your BPM - http://help.sap.com/saphelp_nw04/helpdata/en/43/6211331c895f6ce10000000a1553f6/content.htm
RFC Scenario using BPM --Starter Kit
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
regards
Aashish Sinha
PS : reward points if helpful
Similar Messages
-
How to implement "press any key to continue",please help
my problem is when the "press any key to close the dos" has displayed in the dos , how can realize to close the dos when i press any button.
i have try to use system.in.read();but this method doesn't end until i press the "enter"button.public class P {
public static void main(String[] args){
System.out.println("XXX");
System.out.println("press any key to close！");
//want to System.exit(0) when user type the any key.
BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
try {
int ch = stdin.read();
if(ch !=-1){
System.exit(0);
} catch( Exception e ){
i run this programe by wrote "java P" in the XXX.bat
Edited by: azhi on Mar 4, 2008 5:23 AM
Edited by: azhi on Mar 4, 2008 5:29 AM -
How to implement XP Cisco VPN client. Please help!!!
Hi,
I am trying to configure remote access for XP desktops using CVPN client software and a Cisco 805 router with IOS IPSec capable( authentication should be local). The remote desktops are behind adsl router wich does nat translations but allow IPSes passthrough.
I have configured it but does not working.
Can you please help me?
Thanks in advance
DavidHi guys, Solved.
This very useful link:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Virtual%20Private%20Networks&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd7d54c/0
David -
I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...
Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?
-
my sis. tryed to break my pass and now it says to conect to itunes but i captured so many photos from the last sync how to sync without deleting this photos please help
egzoni 123 wrote:
my sis. tryed to break my pass and now it says to conect to itunes but i captured so many photos from the last sync how to sync without deleting this photos please help
If you Restore using last computer you synced to the password will be removed and you can restore the last backup on your computer, which includes your camera roll.
If you enabled Photo Stream in iCloud your photos are in Photo Stream.
If you had installed one of the many apps that can upload photos to a photo sharing site and had used it you will have your photos.
If you have done none of these things you are out of luck. The phone comes with many tools to preserve content, but you have to use them. -
Hi
If a organization have 200 to 300 daily complains of there IT equipment/Software/Network e.t.c.
How to Implement BW in IT Service Desk/IT Help Desk /IT Complain Surveillance Dept/IT Customer Support Dept?
Is there any standard DataSources/InfoObjects/DSOs/InfoCubes etc. available in SAP BI Content?Imran,
The point I think was to ensure that you knew exactly what was required. A customer service desk can have many interpretations from a BI perspective.
You could have :
1. Operational reports - calls attended per shift , Average number of calls per person , Seasonality in the calls coming in etc
2. Analytic views - Utilization of resources , Average call time and trending , customer satisfaction , average wait time
3. Strategic - Call volumes corresponding to campaigns etc , Employee churn and related call times
Based on these you would then have to construct your models which would be populated by data from the MySQL instance for you to report.
Else if you have BWA you could have data discovery instead or if you have HANA - you could do even more and if you have a HANA sidecar - you technically dont need BW. The possibilities are virtually endless - it depends on how you want to drive it and how the end user ( client ) sees value in the same. -
My apps wont open and i keep downloading new apps, hard resetting, syncing and nothing works! PLEASE HELP
Then restore the iPod. First from backup and if problem persists, restore to factory defaults/new iPod.
-
I have a blackberry 9800 and a macbook pro OS Mavericks 10.9.2. I want to sync my notes, contacts. Please help.
Try syncmate 5 expert http://www.macupdate.com/app/mac/26317/syncmate-expert
BB desktop software uses syncservices which is no longer in Mavericks.
BB Link should work but not on your phone. -
Used ipod touch, cant reset to DFU,sync or power off.. please help!!
used ipod touch, cant reset to DFU,sync or power off.. please help!!
From your description it appears that the iPod is on like it showing something on the screen. In that case let the battery fully drain. After charging for an hour try a rest restore and other things again.
If the iPod returns to the same conditions then it is time for an appoitment at the Genious Bar of an Apple store. -
i use macbook and lion os 10.7.2.
I want to sync gmail contact with address book.
For this i goto preference in address book and select "sync with google".
I put my gmail details.
However, the sync does not happen.
Please help.You should have signed in with that address in the first place, but there is a workaround: go to System preferences>Mail, Contacts@ Calendars and add your @me.com address as an account there.
-
I accidently put all my pics from my computer onto my phone and I have no idea how to get them off. Can u please help??
PhilipRoy wrote:
Please see this article about transferring photos from a mobile device to a computer.
http://support.apple.com/kb/ht4083
Good luck Friend.
That's not going to help. That article is for moving photos from iOS device to computer, not for removing them. Additionally, photos synced via iTunes cannot be manually removed from the device. You have to use iTunes to 'unsync' them, as FoxFifth stated.
Camera Roll pictures are the only ones that can be imported from device to computer. Album folders cannot be moved from device to computer. -
All the my messages from my phone inbox disappeared.Why did it happen and how should i get the messages back?please help
Is the MacBook the computer you have synced with in the past? If not you can use the computer that you have synced with to restore your apps. Are you sure you are using the same Apple ID that you used to purchase the Apps?
-
How to create authorisation object for save button please help in abap
how to create authorisation object for save button please help in abap
Hi
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Regards
ANJI -
HT204053 I have two Apple ID's. How do I delete one of them? Please help. Thank you. Dru
I have two Apple ID's. How do I delete one of them? Please help. Thank you. Dru
To add to the above...
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs. -
I downloaded about 100 cds to my library and I can no longer view the downloaded artwork it's shows a black picture or blank. How can I get the artwork back? Please help! Thank you.
Hi- apparently I also had a similar moment of madness and thought that 'freeride games' would be fun. Well, so much for that! It added a ton of things to my tool bar, I would like to uninstall it, any suggestions for this one?
thanks :) -
After upgrading my software i have seem to have lost all my contacts and photos, i did a back up but i have no idea how to get them back on? maybe im illiterate but i dont know how to find it in my itunes? please help!!
http://support.apple.com/kb/HT5824?viewlocale=en_US&locale=en_US
Maybe you are looking for
-
I have tried for weeks to install the update for iTunts and Quicktime. I think iTunes installs ok but Quicktime stops and gives me Error Code #2738. I have a new HP computer running Windows Vista. Can anyone give me a little help? Thanks
-
I have a new computer and my old drive has my UNSAVED bookmarks on it and I want to import them, how do I do it when the bookmarks are not SAVED?
-
PUK locked SIM and PUK provided on "MYVerizon" doesn't work?
So I have a PUK locked SIM and the PUK that is provided on "MYVerizon" doesn't work? I've had this phone for about a week and have had no problems with it. I set up my own pin and everything but when i went to disable the pin it kept saying it was wr
-
We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name. The files in these directories will be different. These same name directories on multiple severs has to be mounted to a single
-
Hey everyone. 1) We have a consumer that provide authentication services via PKI Certificates. 2) Portlets are access from the consumer via WSRP. Portlets are exposed on another Weblogic EAR/WAR instance in the same domain. 3) We do have local proxy