How to setup RDP or VDI services in this scenario

Hi there! I've this scenario:
a. 20 thin clients (with OS Windows 7 Embedded Edition)
b. Two physical servers Core1 and Core2, with 64GB of RAM, 2 socket CPU, 8 cores, OS Windows Server 2012 R2, and HyperV roles
c. two domain controllers as child virtual machines with 2 GB running (PDC on Srv1 and BDC on Srv2)
d. ExchangeServer 2013 running as child vm on Core1, with 32 GB RAM.
I've licenses for Windows Server 2008 R2, and Windows Server 2012, and MS office 2013
I want clients, after to connect with RDP, to use outlook 2013 for emails.
Now, i want to setup services for 20 thin clients. This is new for me...and i want your suggestions how to setup up them on this scenario. Have i to use RDP services, or VDI???
Regards!
Lasandro Lopez

Hi,
According to your comment, I can say that Share permissions are automatically set up by the management tools once it will be created. We can use windows PowerShell or server manager to manage UPD. Also remember that User profile disks are for a single collection
only. A user connecting to two different collections will have two separate profiles.
Here providing important link to understand UPD. (You can refer below link for Server 2012 R2)
1. Easier User Data Management with User Profile Disks in Windows Server 2012
2. Working with User Profile Disks on Session-Based Desktop Deployments
Hope it helps!
Thanks.

Similar Messages

How to setup HTTP client for HTTP to File scenario

Hey guys
i have a scenario wherein one of our clients is sending invoices(as XML message) over HTTP(client is outside our landscape) and i have to to send this invoice to a File system from where it will be picked up by an ABAP code(picking of the file has to be done by ABAper so i m not concerned with that)
the way i m starting off this project is that
i will create a sender and receiver data type,message type and Message interface,Message mapping is 1-1 so its kinda simple and then Interface mapping.
in configuration i wont be creating and sender communication channel and sender Agreement,i need receiver communication channel,receiver determination and interface determination.
does my design and configuration looks good to you guys?
also i waz goin through some threads and it says that i need to setup HTTP client for this scenario and then specify a URL in a specific format.
where will i setup the HTTP client and where will i specify the URL?
thanx
ahmad

Ahmad,
><i>does my design and configuration looks good to you guys?</i>
Is correct.
><i>where will i setup the HTTP client and where will i specify the URL?</i>
Take a look at this thread and check the HTTP Client code.
Copy the code and save it as a HTML file and you have the HTTP Cliet ready. GIve the details of your server, sender service, interface etc and trigger the call to XI.
In a real time scenario, you will need to use the URL used in the HTTP Client code from your WebApplication to trigger the call to XI.
/message/266750#266750 [original link is broken]
Regards
Bhavesh

How to setup System Uptime in Service Level

Hi All,
I have some question about SAP System Uptime report in SLA (Solution Manager).
I would like to generate report how many days of system up. (Example how many day, how many month)
I try to find the counter to calculate in Service Level Setup.
Does anybody know about how to configure Service Level ?
Please give me an advise.
Regards,
Vipu

On the OAS Control's OC4J section, there is a place you can set the OC4J instance server settings. You can create certain number of JVMs and their runtime properties.

How to write the pl/sql code for this scenario

Hi,
Here is the data in a Table with below colums
id firstname lastname code
1 scott higgins 001
2 Mike Ferrari 001
3 Tom scottsdale 002
4 Nick pasquale 003
1 scott higgins 004
I want to trap the following exceptions into an error table using pl/sql
1. same person having multiple code
example
id first last Code
1 scott higgins 001
1 scott higgins 004
2. Multiple persons having same code
id first last Code
1 scott higgins 001
2 Mike Ferrari 001
Could you please help me how to capture the exceptions above using pl/sql
and what will be the structure of error table. it should capture eff date & end date

or using analytic functions like this:
select id, fname, lname, code from (
with t as(
    select 1 id, 'scott' fname, 'higgins' lname, 001 code from dual
    union all
    select 2 id,'Mike ' fname, 'Ferrari' lname, 001 code from dual
    union all
    select 3 id,'Tom' fname, 'scottsdale' lname, 002 code from dual
    union all
    select 4 id,'Nick' fname, 'pasquale' lname, 003 code from dual
    union all
    select 5 id,'scott' fname, 'higgins' lname, 004 code from dual
    select t.*, count(*) over (partition by fname) row_count from t)
where row_count > 1;
select id, fname, lname, code from (
with t as(
    select 1 id, 'scott' fname, 'higgins' lname, 001 code from dual
    union all
    select 2 id,'Mike ' fname, 'Ferrari' lname, 001 code from dual
    union all
    select 3 id,'Tom' fname, 'scottsdale' lname, 002 code from dual
    union all
    select 4 id,'Nick' fname, 'pasquale' lname, 003 code from dual
    union all
    select 5 id,'scott' fname, 'higgins' lname, 004 code from dual
    select t.*, count(*) over (partition by code) row_count from t)
where row_count > 1;

How should i prepare a technical design for this scenario

Business case for Heiler Part/Plant Interface: with sap
A key function of the Heiler PBC tool is to provide users a choice
between a "Global Catalog View" (e.g. all parts in the catalog) or a
"Local Catalog View" (e.g. the subset of parts in the catalog that have
a Material Master established for the user's plant in SAP). The "Local
Catalog View" is the default condition and encourages users to procure
parts that are on contract for their plant and potentially already
stocked as an inventory item at their plant. Parts that are not in a
user's "Local Catalog View" can only be procured as a spot buy purchase
order, requiring processing by a buyer.
The new Part/Plant interface is required in order for the Heiler PBC
tool to provide this "Local Catalog View" function. The Heiler
Part/Plant table will document what plants in SAP have a Material Master
record established for each part. SAP will maintain the Heiler
Part/Plant table using this interface. When a user performs a part
search in the Heiler PBC tool, the Part/Plant table determines if a part
is included in the user's "Local Catalog View".

MrWizard93 wrote:
Then would it be better to delete all album info and art work?
No. Again, iTunes Match does not change any existing ID3 tags. If you delete album infor and artwork then you will be left with a bunch of matched or uploaded tracks that have no ID3 tag data and you will have no idea what they are.
MrWizard93 wrote:
I mean, for the most part, most of my songs are not the obscure type. They should get matches in Apple's audio signature matching algorithims - at least I hope so. I am just worried about some of the songs that are labeled in a not so great way which doesn't really show up all that elegantly when you have people over and give them free reign over browsing media and what gets played.
Do not make the assumption that any track "should" get matched simply because it might be available in the store. iTM does not use ID3 tags to do it's matching. It uses the sonic fingerprint of the song and compares it to a similar DB on Apple's servers.
If you want "clean" ID3 tags then you need edit the tags yourself.
MrWizard93 wrote:
Would it be best then to go through the matching and upload process, delete the originals from my drive, then redownload everything??
Not necessarily. Ask yourself why would want to do this. If you are already satisfied with the tracks in the library what is the point of deleting and downloading?
If your main purpose in subscribing to iTunes Match is to replace "low quality" audio tracks with tracks from the iTunes Store you will be disappointed in the matching rate. The lower the quality of the audio file the lower the chances of it matching and it will then be uploaded. If, on the other hand, your purpose is to have your iTunes library available on all your devices from just about anywhere then you should be satisfied since this is the primary goal of iTM.

How the Tax amount calculated in AR for this scenario (11i)

Dear All,
I have some doubts with the Tax amount in the AR Trx. Please look into below scenario.
Step1: Create SO and AR Trx
In OM side:
1. I created a SO 001 and there is a item A only. The item's Unit Selling Price is *100$*, Quantity is *1*. Then the SO flown to AR.
In AR side:
1. AR Trx 001 is created for the SO and Tax rate is 17%. Hence the AR Trx Total Amount = Line Amount + Tax Amount = 100 + (100 0.17) = 117*.
Step2: The item has been return from customer.
In OM Side:
2. I added the same item with the Unit Selling Price *200$* and Quantity -1. Then the new SO line flown to AR.
In AR side:
2. Credit Memo is create for the return line of SO.
My doubt is:
What's the tax amount for the Credit Memo? It is 200 * 0.17 or the original trx tax amount (100 * 0.17)?
Thanks & Best Regards!
Jerome

Jerome,
The tax calculated on the Credit memo is always based on the Credit memo amount. So it will be on $200.
However there are few things you need to consider here. If you are creating a RMA in OM and if overapplication is not enabled for the AR Transaction type, the RMA will fail during Autoinvoice since you cannot credit more than the Invoice amount.
One thing I am not sure though is whether you can actually create a RMA with a price different than that of the Original Order.
Hope that helps.
Thanks,
Anil

How to setup a UDP port forward range

Hi,
We are trying to figure out how to setup UDP port forward range. This is the configuration that we are using.
ip nat pool voip-rtp 10.10.10.3 10.10.10.3 netmask 255.255.255.0 type rotary
ip nat inside destination list 114 pool voip-rtp
access-list 114 permit udp any any range 16384 32767
Where 10.10.10.3 is the host I want to forward the ports 16384 to 32767 to.
This is not working. We use a similar set of commands for TCP range forwarding which work perfecting. Can anyone advise of the correct way to port forward a UDP range.
Damien

thanks for the suggestion.
I tried the same , but still the udp port 514 is not available. when i run nmap tool to scan the ports, the udp port 514 is not available to the external world and hence the syslog msgs i send to tat port is not being received. kindly help me out.
thanks again!!

How to Carry out Bulk SMS services on your website

Hello friends
Please I would like to introduce bulk sms services on my site I designed it with Fireworks and exported to Dreamweaver, then uploaded. But recently I have decided to make it more dynamic/blog with it by installing Wordpress and would not mind discarding the static aspects of it.
With this, how can I introduce bulk sms services into this site?
Thank you in anticipation

Let me google that for you
Nancy O.

How to setup Autodiscovery for .local internal domains with Exchange 2013

Hi,
I need to know about how i set autodiscovery in local domain.I have local domain eg
abc.local and domin which i received the emails externally is xyz.com.
I have deployed Exchange2013 recently with same above scenario inbound and outbound mails are working fine using OWA.But outlook clients cannot connect to Exchange server with in the LAN.
Please help me out how set auto discovery in local domain and another help i need how i configure the self sign certificate in this scenario.

You cannot use a self signed cert for RPC/HTTP connections (which is how the Outlook client is connecting exchange2013). Please check this http://social.technet.microsoft.com/Forums/exchange/en-US/aed4ede9-57c3-44c3-90b4-bdfb3a7f017d/exchange-2013-self-signed-certs-and-outlook-client-access?forum=exchangesvrgeneral
But you can use a certificate from an internal CA which you can install in your network issue a certificate for exchange. Please check this it will help you manage internal certificates for a PC and for a domain. http://technet.microsoft.com/en-us/library/cc754841.aspx
You dont need to configure autodiscover for internal domain added clients. If you have clients on the network which are not members of the domain, using Exchange, this could be Windows, MACs or mobile devices, then you should ensure that autodiscover.example.com
resolves internally to the Exchange server via a split DNS system. http://exchange.sembee.mobi/network/split-dns.asp
Please configure your external and internal URLs as well
http://www.mustbegeek.com/configure-external-and-internal-url-in-exchange-2013/
I recommend to buy a 3rd party certificate as it may create issue for external clients e.g.Outlook anywhere
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

How to setup a HA service for RAC?

I have a RAC. It has 2 nodes: node1 and node2.
I want to setup a service and make this service only based on node1
only node1 is damaged, then this service will failover to node2
I checked related knowledge at internet. All the information is related to load balance, not for high available.
For example, below service is load balance:
srvctl add service -d HIC -s CMTLB -r 'HIC1' -a 'HIC2' -P PRECONNECT -e SELECT -x TRUE -j SHORT -B SERVICE_TIME -m BASIC -z 180 -w 5
Now I want to setup a high available service, how to do?
one more question, I should run "srvctl add service" by user "oracle" or "grid"?

user8710670 wrote:
Thanks a lot for your information.
Yes, I think my command is good to setup a service.
But this service is a load balance service.
Through this service, all the connections will be put at both nodes.
Currently, my requirement is that I need a service
Through this service, all the connections will only be put at one node,
until this node damaged,
then the connections are put at another node
Do we have a way for this case?
Your service will not run on both nodes. It will run on one and failover to the other. However, a better way would be to define it as a policy manged service, which may be what you are thinking of.

How can I use Apple Caching Service on a Network with Multiple Public IPs?

Hello!
I help manage a network of ~4000 clients for a small liberal arts college in Michigan. I'm looking into the possibility of implimenting Apple Caching Server for our network.
We have one 400mbit pipe out to the internet, and all of our clients are given public-facing IPs to the internet. A caching server would be great, especially on update days. All wireless clients are on the same subnet, which is where I'd like the server to be serving the cached copies.
I have installed Mavericks on a fresh machine, downloaded OS X Server 3.0.3, and attempted to start the caching service. This is what I get.
Unable to start service.
Caching cannot be run on a public network. Consult documentation.
How can I get this up and running?

The way the Caching server works is that the server will be accessing the Internet and when doing so traffic will be coming from it via a particular public IP address. Usually this will not be the address of the server itelf but your router as for most networks NAT is used. In this by far more common scenario the client Macs (and likely iOS devices) will be going through the same router and hence show up via the same public IP address.
If the client request is the same as the address registered via the Caching server then Apple redirect the request via the Caching server.
The setup would look something like this -
           Internet
                |
            Router (with NAT)
                |
(LAN)     +------Caching Server-----Client devices
With this setup because everything is using the same public IP address Apple can reasonably assume everything is on the same network and trigger a redirection to your Caching server.
If you try a setup like the following with the Caching server having its own public IP it will not work because the Caching server and client devices will have different public IP addresses
           Internet
               |
           Router (no NAT)-------------------+
               |                                      |
            Firewall (with NAT)       Caching Server
               |                                      |
               |                                      |
(LAN)     +-----Client devices-----------+-----------
Your configuration as described is more like the following
           Internet
               |
           Router (no NAT)
               |
(LAN)     +------Caching Server-----Client devices
With yours not having NAT each device has its own public IP address including the Caching server and Apple cannot redirect traffic as it thinks they are on different networks.

How to use Sunray without VDI or VMware View Manager

There is no VDI or VMware View Manager in my test environment. Only srss 4.2 and srwc 2.2 has been installed.
Now i have 5 sunray client and 5 Windows XP VM. How can I let every user use their Windows XP VM in this environment and can enable USB redirection?
In page http://wikis.sun.com/display/SRWC2dot2/Managing+USB+Device+Redirection+%28All+Topics%29
Supported Configurations
Configuration
SRS 5 (SRSS 4.2, SRWC 2.2) and Sun Ray Connector Kiosk Session
Description
Supports connection to Windows desktop using the Kiosk session.
My question is How to let mutipl-user use it in this config
The following is my settings and all users now can use their own Windows XP but USB redirection cannot work
Select Common Desktop Environment (Obsolete) in Kiosk mode add an application:
cam_script.windows_connector,
#!/bin/ksh
# Script to map smartcard token to individual VM using either
# the "User Name" or "Other Info" field of the output from
# utuser -p <token>
# Look at output from utuser -p ${SUN_SUNRAY_TOKEN} and grab hostname
# % utuser -p user.1140788210-7053
# Current Properties:
# User Name = tester5
# Other Info = host
# Server Name = localhost
# Server Port = 7007
# Logical Token = user.1140788210-7053
# User Created = 02/24/2006 13:36:50
# Token Enabled?
# Payflex.500af8ad00130100 Yes
# Currently Logged In:
# Current Desktop = 0003bad7566e
# Desktop Location =
# Logged In Since = 02/24/2006 13:36:58
# Use "User Name" field as hostname of VM to connect to
#VMHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "User Name" | awk '{ print $4 }'`
# Use "Other Info" field as hostname of VM to connect to
#VMHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "Other Info" | awk '{ print $4 }'`
WinHOST=`/opt/SUNWut/sbin/utuser -p ${SUN_SUNRAY_TOKEN} | /usr/bin/grep "Other Info" | awk '{ print $4 }'`
# Could probably do a ping test here and pop up dialogue
# about getting support to check the availability of the
# machine (might event be able to use VC API to power up VM?)
# if it doesn't respond to ping. Could use something like
# dterror.ds, could also pop up different dialogue
# if VMHOST is not set
COLOUR_DEPTH=16
# If using 24bit need registry change under Windows XP
#COLOUR_DEPTH=24
# Fix F11 and F12
#/usr/openwin/bin/xmodmap -e 'keycode 75 = F11'
#/usr/openwin/bin/xmodmap -e 'keycode 76 = F12'
# Fix alt & print screen
#/usr/openwin/bin/xmodmap -e 'keycode 77 = 0xff62'
# Turn on numlock
/usr/openwin/bin/xset led 1
if [ "${WinHOST}" = "" ]; then
     #dterror.ds "Your Windows Machine can not be determined.\n\nPlease contact support and ask for smartcard \n\n${SUN_SUNRAY_TOKEN}\n\nto be associated to a Windows Machine" "Smartcard not configured" "ERROR"
     WinHOST="Windows_default"
fi
# Run Windows Connector in full screen mode at appropriate colour depth with sound redirection
# Disable the windows pulldown header in full-screen mode
# RDP Window Attributes options to disable are:
# -D wallpaper
# -D fullwindowdrag
# -D menuanimations
# -D theming
# -D cursorshadow
# -D cursorsettings
/opt/SUNWuttsc/bin/uttsc -mb -A ${COLOUR_DEPTH} -r sound:high -u "" ${WinHOST}
#if [ "$?" = "0" ]; then
#     dterror.ds "Logging Out..." "Log Out" "OK"
#else
#     dterror.ds "Your Windows Machine ${VMHOST} is not visible on the network.\n\nIf you have just restarted it please wait a minute and try again\nIf you still have problems get help" "Windows VM is not available" "OK"
#fi
# End of CAM script
Then add IP address in other information of Token.

Meta Kiosk would certainly do what you need and the USB pass through works.
http://blogs.sun.com/danielc/entry/meta_kiosk_how_to_run
I think the problem you are running into is that you are using uttsc inside a Solaris environment as an app, looks like CDE, which isn't being supported to my knowledge to avoid conflicts between the two desktops. It is designed to work out of the box with SRWC kiosk mode.
The undocumented way to turn it on is to turn usb on by adding -r USB:on as an argument.

How to Setup Historical DSC Database on a standalone Server

Hey @all,
I am looking for documentation how to setup a standalone server for the DSC Module(Ver. 8) Historical Database.
My aim is to log all data to this server. The Server will be running Win2K.
Do I have to install the complete Labview 8 software and the DSC Module?
Does a walkthrough exist how to setup a DSC server?
Thx!
Carsten

After installing the runtime you should only have to reboot the computer in order to get the citadel service running. At the point, for citadel purposes, this machine will behave as though you had the DSC development system installed. The 8.0 runtime has no setup requirements...it should only need to be installed. Unlike previous versions, 8.0 requires you to build your application into an executable and the runtime should be invisible to you once you install it. If this is not the case, please post about it so it can be looked at.
If you have specific questions, please post them and I will either try and help you find the answers, get them posted, or answer them myself.
Regards,
Robert

How to setup a forms function in R12 to launch an URL?

Hi All,
In 11i we could create a forms function of the type "SSWA plsql function" to launch a html page from the menu.
How is that supposed to work in R12?
So my question is, how to setup a forms function to launch an URL like www.oracle.com in R12?
thanks,
thierry

Hi, first set the Profile 'Restricted Text Input' to 'No' for your User.
Then create a form function like below:
Functional Administrator > Core Services > Function > Create (button)
Name: XX_GOOGLE
Code: XX_GOOGLE
Type: SSWA jsp function
Maintenance Mode Support : none
Context Dependance: Responsibility
(press continue button)
HTML Call: javascript:void window.open("http://www.google.com")
Leave other fields blank
Add to HR_EMPLOYEE_DIRECT_ACCESS_V4.0 menu:
500 XX Google XX_GOOGLE
This will pop up your external webpage in a new window.
The issue is that it only works from the Navigator framework page (not from within Core Forms)
Regards,
Mike

How to setup a PAC proxy on the playbook ?

Anyone know how to setup a PAC proxy on the playbook ? Thx

AGirl71985 wrote:
Hi
I have been trying to setup the mobile hotspot on my phone and haven't been able to find any instructions on how to do this. If anyone can tell me how it would be greatly appreciated. Thanks!
Amanda
Ha Amanda! First, you'll want to make sure your line has been provisioned for Mobile Hotspot service. You can add the feature to allow you to share up to 2 GB of data for 5 other devices for $20.00 per month. Once that is confirmed, please follow these steps to set up your device's mobile hotspot:
Settings> Wireless & Networks> Tethering & Portable hotspot> Portable Wi-Fi hotspot settings> check mark next to Portable Wi-Fi hotspot. This will disable all other data access so that the data usage is allocated correctly. When finished using your Xperia Play as a hotspot, remove the check mark from Portable Wi-Fi hotspot.

How to setup RDP or VDI services in this scenario

Similar Messages

Maybe you are looking for