How to import a image in labview

dear sir,
 how can i import a two bmp image into labview and compare it.... by taking one as reference and other as sample ...
Solved!
Go to Solution.

Under the graphics and suond palette you will find two more palettes that handle imagews and the other image files.
From those you can do a pixel by pixel comapre.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

  • How to import a image and compare with another image to find their deviation

    i am new to labview , can anyone tell how to import a image and compare  it with another image  to find their deviation
    Solved!
    Go to Solution.

    This is an quite easy task using the Vision Development Module.
    There you can acquire images from cameras or read them form the harddrive, then differntiate them or since VDM 2010 calculate the optical flow between consecutive images.
    Christian

  • How to import multiple images at the same time in illustrator?

    How to import multiple images in a document at the same time in illustrator?
    It's possible?

    Script: Place Multiple Files in Illustrator (Kelso)
    http://kelsocartography.com/blog/?p=2047

  • How to import the image by using java application

    1.how to import the image by using java APPLICATION and display it on the textarea that you have been created.
    2.how to store the image into the file.
    3. what class should i used?
    4. how to create an object to keep track the image in java application.
    * important : not java applet.
    plzzzzzzz.
    regards fenny

    follow the link:
    http://java.sun.com/docs/books/tutorial/2d/images/index.html

  • How to import Verilog codes into LabVIEW FPGA?

    I tried to import Verilog code by instantiation followed by the instruction in http://digital.ni.com/public.nsf/allkb/7269557B205B1E1A86257640000910D3, 
    but still I can see some errors while compiling the VI file.
    Simple test Verilog file is as follows:
    ==============================
    module andtwobits (xx, yy, zz);
    input xx, yy;
    output reg zz;
    always @(xx,yy) begin
    zz <= xx & yy;
    end
    endmodule
    ==============================
    and after following up the above link, we created the instantiation file as
    ==============================================
    library ieee;
    use ieee.std_logic_1164.all;
    entity mainVHDL is
    port(
    xxin: in std_logic;
    yyin: in std_logic;
    zzout: out std_logic
    end mainVHDL;
    architecture mainVHDL1 of mainVHDL is
    COMPONENT andtwobits PORT (
    zz : out std_logic;
    xx : in std_logic;
    yy : in std_logic);
    END COMPONENT;
    begin
    alu : andtwobits port map(
    zz => zzout,
    xx => xxin,
    yy => yyin);
    end mainVHDL1;
    ==============================================
    Sometimes, we observe the following error when we put the indicator on the output port,
    ERROR:ConstraintSystem:58 - Constraint <INST "*ChinchLvFpgaIrq*bIpIrq_ms*" TNM =
    TNM_ChinchIrq_IpIrq_ms;> [Puma20Top.ucf(890)]: INST
    "*ChinchLvFpgaIrq*bIpIrq_ms*" does not match any design objects.
    ERROR:ConstraintSystem:58 - Constraint <INST "*ChinchLvFpgaIrq*bIpIrq*" TNM =
    TNM_ChinchIrq_IpIrq;> [Puma20Top.ucf(891)]: INST "*ChinchLvFpgaIrq*bIpIrq*"
    does not match any design objects.
    and interestingly, if we remove the indicator from the output port, it sucessfully compiles on the LabVIEW FPGA.
    Could you take a look at and please help me to import Verilog to LabVIEW FPGA?
    I've followed the basic steps of instantiation on the above link, but still it won't work.
    Please find the attachment for the all files.
    - andtwobits.v : original Verilog file
    - andtwobits.ngc: NGC file
    - andtwobits.vhd: VHD file after post-translate simulation model
    - mainVHDL.vhd: instantiation main file
    Since there is no example file for Verilog (there is VHDL file, but not for Verilog), it is a bit hard to do the simple execution on LabVIEW FPGA even for the examples.
    Thank you very much for your support, and I'm looking forward to seeing your any help/reply as soon as possible.
    Bests,
    Solved!
    Go to Solution.
    Attachments:
    attach.zip ‏57 KB

    Hi,
    I am facing problem in creating successfully importing  VHDL wrapper file for a Verilog module,into LabVIEW FPGA using CLIP Node method. Please note that:
    I am working on platform SbRIO-9606.
    Labiew version used is 2011 with Xilinx 12.4 compiler tools
    NI RIO 4.0 is installed
    Xilinx ISE version installed in PC is also 12.4 webpack ( Though I used before Xilinx 10.1 in PC for generating .ngc file for verilog code FOR SbRIO 9642 platform, but problem remains same for both versions)
    Query1. Which versions of Xilinx ISE (to be installed in PC for generating .ngc file) are compatible with Labview 2011.1(with Xilinx 12.4 Compiler tools)? Can any version be used up to 12.4?
    Initially I took a basic and gate verilog example to import into LabVIEW FPGA i.e. simple_and.v and its corresponding VHDL file is SimpleAnd_Wrapper.vhd
    ///////////////// Verilog code of “simple_and.v”//////////////////////
    module simple_and(in1, in2, out1);
       input in1,in2;
       output reg out1;
       always@( in1 or in2)
       begin
          out1 <= in1 & in2;
       end
    endmodule
    /////////////////VHDL Wrapper file code of “SimpleAnd_Wrapper.vhd” //////////////////////
    LIBRARY ieee;
    USE ieee.std_logic_1164.ALL;
    ENTITY SimpleAnd_Wrapper IS
        port (
            in1    : in std_logic;
            in2    : in std_logic;
            out1   : out std_logic
    END SimpleAnd_Wrapper;
    ARCHITECTURE RTL of SimpleAnd_Wrapper IS
    component simple_and
       port(
             in1    : in std_logic;
             in2    : in std_logic;
             out1   : out std_logic
    end component;
    BEGIN
    simple_and_instant: simple_and
       port map(
                in1 => in1,
                in2 => in2,
                out1 => out1
    END RTL;
    Documents/tutorials followed for generating VHDL Wrapper file for Verilog core are:
    NI tutorial “How do I Integrate Verilog HDL with LabView FPGA module”. Link is http://digital.ni.com/public.nsf/allkb/7269557B205B1E1A86257640000910D3
    In this case, I did not get any vhdl file after “post-translate simulation model step” in netlist project using simple_and.ngc file previously generated through XST. Instead I got was simple_and_translate.v.
    Query2. Do I hv to name tht “v” file into “simple_and.vhd”?? Anyways it did not work both ways i.e. naming it as “simple_and with a “v” or “vhd” extension. In end I copied that “simple_and.v” post translate model file, “simple_and.ngc”, and VHDL Wrapper file “SimpleAnd_Wrapper.vhd” in the respective labview project directory.
    Query3. The post-translate model file can  also be generated by implementing verilog simple_and.v  file, so why have to generate it by making a separate netlist project using “simple_and.ngc” file? Is there any difference between these two files simple_and_translate.v generated through separate approaches as I mentioned?
    2. NI tutorial “Using Verilog Modules in a Component-Level IP Design”. Link is https://decibel.ni.com/content/docs/DOC-8218.
    In this case, I generated only “simple_and.ngc” file by synthesizing “simple_and.v “file using Xilinx ISE 12.4 tool. Copied that “simple_and.ngc” and “SimpleAnd_Wrapper.vhd” file in the same directory.
    Query4. What is the difference between this method and the above one?
    2. I followed tutorial “Importing External IP into LABVIEW FPGA” for rest steps of creating a CLIP, declaring it and passing data between CLIP and FPGA VI. Link is http://www.ni.com/white-paper/7444/en. This VI executes perfectly on FPGA for the example”simple_and.vhd” file being provided in this tutorial.
    Compilation Errors Warnings received after compiling my SimpleAnd_Wrapper.vhd file
    Elaborating entity <SimpleAnd_Wrapper> (architecture <RTL>) from library <work>.
    WARNING:HDLCompiler:89"\NIFPGA\jobs\WcD1f16_fqu2nOv\SimpleAnd_Wrapper.vhd"    Line 35: <simple_and> remains a black-box since it has no binding entity.
    2. WARNING:NgdBuild:604 - logical block 'window/theCLIPs/Component_ dash_Level _IP_ CLIP0/simple_and_instant' with type   'simple_and' could not be resolved. A pin name misspelling can cause this, a missing edif or ngc file, case mismatch between the block name and the edif or ngc file name, or the misspelling of a type name. Symbol 'simple_and' is not supported in target 'spartan6'.
    3. ERROR:MapLib:979 - LUT6 symbol   "window/theVI/Component_dash_Level_IP_bksl_out1_ind_2/PlainIndicator.PlainInd icator/cQ_0_rstpot" (output signal=window/theVI/ Component_dash_Level _IP_bksl_out1_ ind_2/PlainIndicator.PlainIndicator/cQ_0_rstpot) has input signal "window/internal_Component_dash_Level_IP_out1" which will be trimmed. SeeSection 5 of the Map Report File for details about why the input signal willbecome undriven.
    Query5. Where lays that “section5” of map report? It maybe a ridiculous question, but sorry I really can’t find it; maybe it lays in xilnx log file!
    4. ERROR:MapLib:978 - LUT6 symbol  "window/theVI/Component_dash_Level_IP_bksl_ out1_ind_2/PlainIndicator.PlainIndicator/cQ_0_rstpot" (output signal= window / theVI/Component_dash_Level_IP_bksl_out1_ind_2/PlainIndicator.PlainIndicator/ cQ_0_rstpot) has an equation that uses input pin I5, which no longer has a connected signal. Please ensure that all the pins used in the equation for this LUT have signals that are not trimmed (see Section 5 of the Map Report File for details on which signals were trimmed). Error found in mapping process, exiting.Errors found during the mapping phase. Please see map report file for more details.  Output files will not be written.
    Seeing these errors I have reached the following conclusions.
    There is some problem in making that VHDL Wrapper file, LabVIEW does not recognize the Verilog component instantiated in it and treat it as unresolved black box.
    Query6. Is there any step I maybe missing while making this VHDL wrapper file; in my opinion I have tried every possibility in docs/help available in NI forums?
    2. Query7. Maybe it is a pure Xilinx issue i.e. some sort of library conflict as verilog module is not binding to top VHDL module as can be seen from warning HDLCompiler89. If this is the case then how to resolve that library conflict? Some hint regarding this expected issue has been given in point 7 of tutorial “How do I Integrate Verilog HDL with LabView FPGA module”. http://digital.ni.com/public.nsf/allkb/7269557B205B1E1A86257640000910D3. But nothing has been said much about resolving that issue.  
    3. Because of this unidentified black box, the whole design could not be mapped and hence could not be compiled.
    P.S.
    I have attached labview project zip folder containing simple_translate.v, simple_and_verilog.vi file,SimpleAnd_Wrapper.xml,  Xilinx log file after compilation alongwith other files. Kindly analyze and help me out in resolving this basic issue.
    Please note that I have made all settings regarding:
    Unchecked add I/O buffers option in XST of Xilinx ISE 12.4 project
    Have set “Pack I/O Registers into IOBs” to NO in XST properties of project.
    Synchronization registers are also set to zero by default of all CLIP I/O terminals.
    Please I need speedy help.Thanking in you in anticipation.
    Attachments:
    XilinxLog.txt ‏256 KB
    labview project files.zip ‏51 KB

  • How to import all images on disc?

    after having used iPhoto 08 for a long time the link between the program and the source files broke. i have a hard time restoring the library. how can i import ALL images on my harddisc into iphoto? is there a function that scans and finds all images automatically?

    after having used iPhoto 08 for a long time the link between the program and the source files broke. i have a hard time restoring the library. how can i import ALL images on my harddisc into iphoto? is there a function that scans and finds all images automatically?
    You really would not want to do this - you would have a mess - many duplicates and lots of images that have nothing to do with photos
    Tell us more about your problem - what is happening and how it occurred
    Most likely you have all of your original Photos in the originals folder of your iPhoto library and simply quitting iPhoto, dragging the iPhoto library to the desktop, launching iPhoto and creating a new library and dragging each folder from the originals folder in your iPhoto library on the desktop onto the iPhoto icon in the dock (check to be sure that the iPhoto preference to split items imported from the finder is NOT checked) - this will recreate your events
    If this is not an option their probably is still help
    LN

  • How to streaming data/image from labview to a third party software

    Hi, i am working on a research project and stuck on the following problem: I have two cameras and one IMU Sensor unit, all conected to my PC. I save the camera images as avi format and the IMU sensor as TDMS format. I have also another software running on the same PC which i developed using VisualStudio2013.  On this software i alredy implemented a very complex filter to fuse images and IMU.  Now my quesion: would be it possibel to stream the .avi and .tdms from LabView to my software so I can test in real time how my filter is performing? If yes please let me know what LabView function do i have to use. thanks

    Thanks, the hardware are my PC, 2 usb cameras and one usb-IMU sensor. The PC runs w7 with LabView2014. I can read the camera and IMU to my Laview without any problem and save the data on my hard desk. I am also developing another software on VS-C++ for image processing and data fusion. I would like to know what is the best (and fastest) possibility to stream this data (Images and IMU) in real time from LabView to my own software?
    I read a lot in NI-website on how to communicate LabView with a third party software. They are summarized in this link:
    https://decibel.ni.com/content/docs/DOC-9131
    It looks for me that the ‘shard memory’ principle (or File Mapping) is the most convenient method. In VC++ under windows I can easily handle shared memory by calling FileMapping windows functions. Now the question is how can I do that in LabView? I am relatively new in LabView and do not know if it is possible to use shared memory in LabView. For example: is it possible in LabView to buffer both video streams and IMU-data (live) in a shared memory in computer RAM using the windows FileMaping functions (may be using .dll). Then I can access the RAM form my own software and read the stream. Please see the attachment for more description.
    Attachments:
    Unbenannt.PNG ‏139 KB

  • How to import an image into indesign?

    how do i import an image from google images into indesign and then use as a background like a watermark?

    Save it out of Google Images to your hard drive. It'll probably be a JPEG file. Choose File > Place to place the image. To use it as a watermark, it will have to be on a lower layer or lower in the stacking order than other objects on the page.
    It sounds like you could use some help learning InDesign. I highly recommend Sandee Cohen's Visual QuickStart Guide, which is available for every version of InDesign. It's inexpensive and will save a lot of time learning the program:
    InDesign CC: Visual QuickStart Guide

  • How to import PDF image into Pages manuscript that is larger than the text bed margins

    How do I import a PDF image into a Pages book manuscript, whose dimensions are larger than the global text bed margins? Any imported PDF image is automatically shrunk to fit within the text bed. I know I can set up a single page with wider margins and a text bed within it, but I want the image to import to a page already within the manuscript sequence, where the text bed margins are set and constant.
    Larry Kettelkamp
    [email protected]

    By default it should be dragging in as a floating image and not part of the text.
    What version of Pages are you using?
    In Pages 5 this is:
    Format > Arrange > Object Placement > Stay on Page > Size > Original size
    Peter

  • How to import selected images from iPhoto 11 into Elements 9?

    How do I import selected images or events from iPhoto 11 into albums in Elements 9 Organizer?  I don't want all my thousands of images in Elements.  Both iPhoto and Elements 9 are updated.

    I don't use iPhoto much at all, but you can set it to use PSE (or any other real image editing app) to edit the images you store in it. Check the iPhoto Prefs (command comma) and look at the General tab. Select PSE or any other app in the "Edit photo:" pop-up menu. That way you can still keep iPhoto for storage/filing and PSE for editing. Hope that helps.

  • How to import edited images from iPhone 6

    I am able to import unedited images from my iPhone 6 into PSE 11.  However if I have edited them in the iPhone Photos app, PSE 11 sees only the unedited original.  Windows Pictures also seems to import only the originals.  Apple's article at support.apple.com/en-us/ht203612 says they use Adobe's xmp for editing, and it lists PSE as one of the programs that support xmp.  So how do I get to the edited images from PSE?

    Yes. Use iPhoto Library Manager to move the photos/albums/events between libraries. This gets all the versions and all the metadata. It's the only way to do this.
    Regards
    TD

  • How to import multiple images as slides for a history presentation?

    I teach college & often want to do slide shows with images from a folder.
    This is possible with Picassa.
    I would like to automate the process of importing, say 50 images, from a folder and creating 1 slide per image.
    Is there any way to automate or simplify the process.
    I know I can do each slide individually, but I'm looking for a way to save time.
    Marc

    However, when you drop them, they are out of order. As far as I can figure out, they are on computer order: 100, 1000, 11, 110, or something like that.
    I am having the same problem as the other guy. I have to import 300 images into a keynote presentation. Each image on one slide. I have exported the images from iPhoto into a folder, and they are the right size. Now, how do I get them into Keynote in the right order?! Too many to sort by hand, sooo long to add individually. Help!
    Thanks

  • How to import URL image into Adobe Muse ?

    Hello dear Adobe Community,
    I have a (silly) question, I'm building my website on muse and I can't find the way to import URL image.
    Are you forced to have all your image stocked in website ? I used to have everything on Google Plus to save me some storage place for the HD image and then to load it via URL in my old website.
    Is there anyway to import URL image ?
    Thanks you very much for your answers !

    Hello,
    In case of google plus you can  do that. Please follow the steps below.
    Step 1. Get the url of the image from google plus by Right click > Copy Image URL
    Step 2. Now you need to insert the HTML codes mentioned below in Muse by going to Object > Insert HTML
    <img src="ImageURL" width="400" height="400">
    You need to replace "ImageURL" with the link you copied from step 1. Please make sure the images are public.
    Please let me know if you face any difficulty.
    Regards
    Vivek

  • How to import an image sequence in CS4

    Hello!  I am working on a big project today and I'm importing images in by the hundreds.  Is there an easy way to import an image sequence into the timeline?  I remember there use to be with earlier versions of flash but I can't figure it out for CS4 - Luckily these images are named sequentially.  Any help would be much appreciated, thanks!

    Ah that was the problem!  i needed to import to stage instead of library -facepalm- thank you so much!  you've just saved me hours and hours of work!  now if i can just get it to import to stage without flash crashing

  • How to import specific images from camera to iPhoto

    I've been using Nikon Tranfers to bring images to my iMac, it's a really easy application to use but recently it has developed a bug which prevents me from deleting the images on the SD card once they are transferred.  I looked at using iPhoto but when the SD card is connected via a reader it doesn't show the gallery of images that are on the card, it prompts me to enter an album name but then it transfers all the images on the card onto the iMac.
    Is there a way to view the files on the card and to select specific ones to transfer/

    What version of iPhoto?
    Prior to iPhoto '08 image capture was the only way to selective import was image capture.
    LN

Maybe you are looking for