How to import partition table in 10 express edition database

Hi all,
I have 10g express edition installed on my laptop, I have a table with partition now I am unable to import that table in my oracle 10 express edition database.Anybody help me in this regard that how could I able to import this table in my database, even I dont want its partitions I want only data.
Regards

The phrase "awfully small table" was not intended as criticism. It merely notes that tables smaller than 2 GB would normally be too small to partition. Since you didn't specify the amount of data initially, it was reasonable to suspect that you might exceed the express edition data size limits.
If you pre-create the table as a non-partitioned table (i.e. do a CREATE TABLE manually) before importing, I would expect that would allow the import to succeed (of course, you'd have to ignore the warning that the object already existed when it was time to import).
Justin

Similar Messages

  • How to import partitioned tables in different tablespace

    Hi everyone,
    I try to import the partitioned tables in different tablespace.
    Consider the following situation:
    I have a dump file which is created by using "Export" utility. Some data are in partitioned tables, some of them are in non-partitioned tables. Also, all tables are located in "MYTBS" tablesapce. I try to import all data from this dump file to another database. I didn't get error messages when importing the data from non-partitioned tables. However, I got error message when importing the data from partitioned tables. The error message is: tablespace 'MYTBS' does not exist.
    I just want to how I can solve this problem other than create 'MYTBS' tablespace for my new database.
    Thanks in advance.
    Angel

    Hi,
    I got the following error message:
    IMP-00017: following statement failed with ORACLE error 959:
    "CREATE TABLE "FACILITYCONNECTION",....., "CONNECTIONTYPE" "
    "NUMBER(1, 0) NOT NULL ENABLE) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 25"
    "5 PARALLEL ( DEGREE DEFAULT INSTANCES 1) NOLOGGING STORAGE( PCTINCREASE 0) "
    "TABLESPACE "MYTBS" PARTITION BY RANGE ("CONNECTIONTYPE" ) (PARTITION "
    ""EXT" VALUES LESS THAN (1) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 S"
    "TORAGE(INITIAL 65536) TABLESPACE "MYTBS" NOLOGGING, PARTITION "FAC" VA"
    "LUES LESS THAN (2) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(I"
    "NITIAL 65536) TABLESPACE "MYTBS" NOLOGGING )"
    IMP-00003: ORACLE error 959 encountered
    ORA-00959: tablespace 'MYTBS' does not exist
    Thanks.
    Angel

  • How to import external table, which exist in export dump file.

    My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character".
    The original definition of the extenal table is as given below
    CREATE TABLE EXT_TABLE_EV02_PRICEMARTDATA
    EGORDERNUMBER VARCHAR2(255 BYTE),
    EGINVOICENUMBER VARCHAR2(255 BYTE),
    EGLINEITEMNUMBER VARCHAR2(255 BYTE),
    EGUID VARCHAR2(255 BYTE),
    EGBRAND VARCHAR2(255 BYTE),
    EGPRODUCTLINE VARCHAR2(255 BYTE),
    EGPRODUCTGROUP VARCHAR2(255 BYTE),
    EGPRODUCTSUBGROUP VARCHAR2(255 BYTE),
    EGMARKETCLASS VARCHAR2(255 BYTE),
    EGSKU VARCHAR2(255 BYTE),
    EGDISCOUNTGROUP VARCHAR2(255 BYTE),
    EGREGION VARCHAR2(255 BYTE),
    EGAREA VARCHAR2(255 BYTE),
    EGSALESREP VARCHAR2(255 BYTE),
    EGDISTRIBUTORCODE VARCHAR2(255 BYTE),
    EGDISTRIBUTOR VARCHAR2(255 BYTE),
    EGECMTIER VARCHAR2(255 BYTE),
    EGECM VARCHAR2(255 BYTE),
    EGSOLATIER VARCHAR2(255 BYTE),
    EGSOLA VARCHAR2(255 BYTE),
    EGTRANSACTIONTYPE VARCHAR2(255 BYTE),
    EGQUOTENUMBER VARCHAR2(255 BYTE),
    EGACCOUNTTYPE VARCHAR2(255 BYTE),
    EGFINANCIALENTITY VARCHAR2(255 BYTE),
    C25 VARCHAR2(255 BYTE),
    EGFINANCIALENTITYCODE VARCHAR2(255 BYTE),
    C27 VARCHAR2(255 BYTE),
    EGBUYINGGROUP VARCHAR2(255 BYTE),
    QTY NUMBER,
    EGTRXDATE DATE,
    EGLISTPRICE NUMBER,
    EGUOM NUMBER,
    EGUNITLISTPRICE NUMBER,
    EGMULTIPLIER NUMBER,
    EGUNITDISCOUNT NUMBER,
    EGCUSTOMERNETPRICE NUMBER,
    EGFREIGHTOUTBOUNDCHARGES NUMBER,
    EGMINIMUMORDERCHARGES NUMBER,
    EGRESTOCKINGCHARGES NUMBER,
    EGINVOICEPRICE NUMBER,
    EGCOMMISSIONS NUMBER,
    EGCASHDISCOUNTS NUMBER,
    EGBUYINGGROUPREBATES NUMBER,
    EGINCENTIVEREBATES NUMBER,
    EGRETURNS NUMBER,
    EGOTHERCREDITS NUMBER,
    EGCOOP NUMBER,
    EGPOCKETPRICE NUMBER,
    EGFREIGHTCOSTS NUMBER,
    EGJOURNALBILLINGCOSTS NUMBER,
    EGMINIMUMORDERCOSTS NUMBER,
    EGORDERENTRYCOSTS NUMBER,
    EGRESTOCKINGCOSTSWAREHOUSE NUMBER,
    EGRETURNSCOSTADMIN NUMBER,
    EGMATERIALCOSTS NUMBER,
    EGLABORCOSTS NUMBER,
    EGOVERHEADCOSTS NUMBER,
    EGPRICEADMINISTRATIONCOSTS NUMBER,
    EGSHORTPAYMENTCOSTS NUMBER,
    EGTERMCOSTS NUMBER,
    EGPOCKETMARGIN NUMBER,
    EGPOCKETMARGINGP NUMBER,
    EGWEIGHTEDAVEMULTIPLIER NUMBER
    ORGANIZATION EXTERNAL
    ( TYPE ORACLE_LOADER
    DEFAULT DIRECTORY EV02_PRICEMARTDATA_CSV_CON
    ACCESS PARAMETERS
    LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv')
    REJECT LIMIT UNLIMITED
    NOPARALLEL
    NOMONITORING;
    While importing , when i seen the log file , it is failing the create the external table. Getting the error "ORA-00911: invalid character".
    Can some one suggest how to import external tables
    Addressing this issue will be highly appriciated.
    Naveen

    Hi Srinath,
    When i observed the create table syntax of external table from import dump log file, it show few lines as below. I could not understand these special characters. And create table definationis failing with special character viz ORA-00911: invalid character
    ACCESS PARAMETERS
    LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv').
    I even observed the create table DDL from TOAD. It is same as i mentioned earlier
    Naveen

  • How to import a table which is in mdb file(same table in different mdb's)

    Hello,
    how to import a table which is in mdb file(same table in different mdb's)
    e.g. table 'EMPLOYEE' is in 'test.mdb' the same table 'EMPLOYEE' is in 'current.mdb'
    How this can be done on click of a button on my form if the path of mdb is provided?
    Thanks

    This question is not related with ora dev forms, its about Microsoft Access.
    Use import option (File >> Get External Data >> Import)
    or use TransferDatabase action.

  • How's this partition table for my server?

    How's this partition table for my server?  Web/DNS/DHCP/Mail Server.
    hdd1: ~8gb total
    /boot - 100mb
    swap - 1gb
    / - rest of drive
    hdd2: ~155gb total
    /var - whole drive
    This is a Compaq ProLiant 5500 server with 10 drives.  Will most things be installed inside /var or what?

    Zetsumei wrote:Web/DNS/DHCP/Mail Server.
    Web = /srv
    DNS = /var
    DHCP = /var
    Mail = Depends which package you use. I use postfix and told it to use /srv
    I would half your swap, reduce /var and put the extra space into /srv
    Also create a separate /tmp and /home to prevent accidental or deliberate DoS attacks by filling your / partition
    Here's what I use on my Web / DNS / FTP server:
    Filesystem Size Used Avail Use% Mounted on
    /dev/xvda 493M 176M 317M 36% /
    /dev/xvdc 31M 674K 29M 3% /boot
    /dev/lvmData-home 62M 26M 34M 44% /home
    /dev/lvmData-usr 2.0G 848M 1.1G 45% /usr
    /dev/lvmData-tmp 496M 20M 451M 5% /tmp
    /dev/lvmData-srv 1.5G 769M 667M 54% /srv
    /dev/lvmData-var 496M 231M 241M 49% /var
    /dev/lvmData-pacman 384M 303M 82M 79% /var/cache/pacman
    /dev/lvmData-backup 5.5G 4.6G 565M 90% /mnt/backup

  • Creating Partitions in Oracle 10G Express Edition

    Can I create partitions in oracle 10g express edition?

    See yourself :
    http://download.oracle.com/docs/cd/B25329_01/doc/license.102/b25456/toc.htm#BABJIJCJ

  • How to extract data from dmp file to oracle express edition database

    Hi,
    I wanted to extract a oracle dump file in oracle express edition database. Is it possible? If yes, then can anyone please guide me how to do it?
    Thanks

    Hi,
    This might help
    Backup/Export Question!
    Br,Jari

  • Newly installed oracle 10g express edition database

    Hai to all
    I have fedora 15 operating system with oracle 10g express edition database installed .. I already have working knowledge in mysql database .. my question is that when i opened oracle database via sql developer , then by expanding tables tab on left side .. I can able to see some table that are created by default as the following:
    AQ$_INTERNET_AGENT_PRIVS
    DEF$_AQCALL
    LOGMNR_AGE_SPILLS$
    My question is that . Can i drop all these tables ??? . By doing so, will that create any problems ..
    Any idea will help me ..
    thanks in advance to allllllll

    If You wont to see how Oracle drop tables
    - create Youre schema
    create user test_user ... ;
    -create table
    create table test_user.test_table ... ;
    drop table
    table test_user.test_table ;
    Regards,
    Pavel
    Edited by: Pavel on May 22, 2012 10:26 PM

  • Using OBIEE with Oracle Express Edition Database? SOLVED

    I have a client that wants a quick demo of OBIEE. They sent us some csv files as the data source. I migrated them to Excel files for easier use, but the Excel files seem to have limitations on how I can combine the columns, such as concatenating and formatting.
    I then loaded them into an Oracle Express Edition database, assuming more "database" functionality would be available to me. I was able to load them into the Administration Tool, but Answers gives me the following error when I try to view any results from the Express database:
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
    SQL Issued: SELECT COURSE_ENROLLMENT.CAMPUS saw_0 FROM BI_DEMO ORDER BY saw_0
    Thanks for any help. This is my first non-guided attempt using OBIEE.
    Edited by: markstuartnelson on Sep 29, 2008 5:22 PM

    Thanks. I got some assistance from a co-worker that is also using Express Edition. (This is also my first use of Express Edition.)
    Here is the tnsnames entry that I created, in case it helps someone else:
    DEMO_XE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
         (SERVER = DEDICATED)
         (SERVICE_NAME = xe)
    )

  • Article - LabVIEW-Based Utility to Package & Deploy MS SQL Server 2005 Express Edition Databases

    Anthony Lukindo, the newest ExpressionFlow blog LabVIEW community author, has just published the first part of his two-part blog article
    LabVIEW-Based Utility to Package & Deploy MS SQL Server 2005 Express Edition Databases - Part 1
    Please check it out!
    Tomi Maila

    Anthony Lukindo, the newest ExpressionFlow blog LabVIEW community author, has just published the first part of his two-part blog article
    LabVIEW-Based Utility to Package & Deploy MS SQL Server 2005 Express Edition Databases - Part 2
    Please check it out!
    Tomi Maila

  • Importing partitioned table data into non-partitioned table

    Hi Friends,
    SOURCE SERVER
    OS:Linux
    Database Version:10.2.0.2.0
    i have exported one partition of my partitioned table like below..
    expdp system/manager DIRECTORY=DIR4 DUMPFILE=mapping.dmp LOGFILE=mapping_exp.log TABLES=MAPPING.MAPPING:DATASET_NAPTARGET SERVER
    OS:Linux
    Database Version:10.2.0.4.0
    Now when i am importing into another server i am getting below error
    Import: Release 10.2.0.4.0 - 64bit Production on Tuesday, 17 January, 2012 11:22:32
    Copyright (c) 2003, 2007, Oracle.  All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "MAPPING"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "MAPPING"."SYS_IMPORT_FULL_01":  MAPPING/******** DIRECTORY=DIR3 DUMPFILE=mapping.dmp LOGFILE=mapping_imp.log TABLE_EXISTS_ACTION=APPEND
    Processing object type TABLE_EXPORT/TABLE/TABLE
    ORA-39083: Object type TABLE failed to create with error:
    ORA-00959: tablespace 'MAPPING_ABC' does not exist
    Failing sql is:
    CREATE TABLE "MAPPING"."MAPPING" ("SAP_ID" NUMBER(38,0) NOT NULL ENABLE, "TG_ID" NUMBER(38,0) NOT NULL ENABLE, "TT_ID" NUMBER(38,0) NOT NULL ENABLE, "PARENT_CT_ID" NUMBER(38,0), "MAPPINGTIME" TIMESTAMP (6) WITH TIME ZONE NOT NULL ENABLE, "CLASS" NUMBER(38,0) NOT NULL ENABLE, "TYPE" NUMBER(38,0) NOT NULL ENABLE, "ID" NUMBER(38,0) NOT NULL ENABLE, "UREID"
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
    ORA-39112: Dependent object type OBJECT_GRANT:"MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type OBJECT_GRANT:"MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
    ORA-39112: Dependent object type INDEX:"MAPPING"."IDX_TG_ID" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type INDEX:"MAPPING"."PK_MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type INDEX:"MAPPING"."IDX_UREID" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type INDEX:"MAPPING"."IDX_V2" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type INDEX:"MAPPING"."IDX_PARENT_CT" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
    ORA-39112: Dependent object type CONSTRAINT:"MAPPING"."CKC_SMAPPING_MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type CONSTRAINT:"MAPPING"."PK_MAPPING_ITM" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."IDX_TG_ID" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."PK_MAPPING" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."IDX_UREID" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."IDX_V2" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."IDX_PARENT_CT" creation failed
    Processing object type TABLE_EXPORT/TABLE/COMMENT
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
    ORA-39112: Dependent object type REF_CONSTRAINT:"MAPPING"."FK_MAPPING_MAPPING" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type REF_CONSTRAINT:"MAPPING"."FK_MAPPING_CT" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type REF_CONSTRAINT:"MAPPING"."FK_TG" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type REF_CONSTRAINT:"MAPPING"."FK_TT" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
    ORA-39112: Dependent object type INDEX:"MAPPING"."X_PART" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type INDEX:"MAPPING"."X_TIME_T" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type INDEX:"MAPPING"."X_DAY" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    ORA-39112: Dependent object type INDEX:"MAPPING"."X_BTMP" skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."IDX_TG_ID" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."IDX_V2_T" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."PK_MAPPING" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."IDX_PARENT_CT" creation failed
    ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"MAPPING"."IDX_UREID" creation failed
    Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
    ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"MAPPING"."MAPPING" creation failed
    Job "MAPPING"."SYS_IMPORT_FULL_01" completed with 52 error(s) at 11:22:39Please help..!!
    Regards
    Umesh Gupta

    yes, i have tried that option as well.
    but when i write one tablespace name in REMAP_TABLESPACE clause, it gives error for second one.. n if i include 1st and 2nd tablespace it will give error for 3rd one..
    one option, what i know write all tablespace name in REMAP_TABLESPACE, but that too lengthy process..is there any other way possible????
    Regards
    UmeshAFAIK the option you have is what i recommend you ... through it is lengthy :-(
    Wait for some EXPERT and GURU's review on this issue .........
    Good luck ....
    --neeraj                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • $5 Starbucks card to first successful answer: how to import midi timecode into Logic Express 9 from Roland VS-880 or Ensoniq ASR-10

    I will literally mail a $5 Starbucks card or gift $5 via paypal to the first person whose response gets me success.  Then after all responses are provided and I'm successful with my issue, I'll also raffle off $5 to one of ALL respondents by random pick. 
    Problem/question:
    I can't figure out how to import midi timecode data from either an Ensoniq ASR-10 or Roland VS-880 Vxpanded into Logic Express 9, so I can then use Logic Express 9 as the master.  No manuals seem to explain that; I just can't find it.
    Background/basics:
    1.  My ultimate goal will be to move all midi data from the Ensoniq ASR-10 floppies and all digital audio files from the VS-880 into Logic Express 9.  Once the midi timing is imported into a Logic Express 9 file, I'll import the data from the Ensoniq & Roland via steps 2a & 2b below.
    1a.  Ten years ago I somehow (am in the process of re-learning what I did 10 years ago) imported the midi timing into the Roland VS-880 Vxpanded from the ASR-10, and then used the VS-880 as the Master to control the ASR-10.   So my current status is that I use the Roland VS-880 as the master, and the Ensoniq ASR-10 as the slave.
    2.  FYI for anyone who might be in the same boat, wanting to transfer stuff from an Ensoniq ASR-10 and Roland VS-880 to the computer:
    2a.  I will import all midi sequence data from my ASR-10 floppy disks via a utility purchased here, which will all a PC to read Ensoniq-formatted disks, and then just hopefully cut/paste midi files into Logic Express 9 (FYI only):  www.chickensys.com
    2b.  Then will import all the individual WAV files from my Roland VS-880 to Logic Express 9 using a method learned here (FYI only): http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=985974&PHP SESSID=b1d2f57be4a1d37d49787400213b22df
    2c.  I'll then combine them all into Logic Express 9.
    So - how the heck do I capture/import the midi timecode into Logic from either the roland or ensoniq using midi?
    I'm don't think that cutting/pasting the midi data into a Logic Express 9 sequence file (step 2a above) will do that, because there are all kinds of tempo & time signature changes in the midi files unfortunately.
    THANK YOU and Merry Christmas!!
    Andy

    OK doesn't look possible.  Closing discussion. 

  • How to import a table from another database using DB toolset.

    Hello All
    I would like to import a table from one database to another using DB toolbox.
    I do not want to import all data to LV and then save them to another database. Instead I would prefer to use SQL syntax.
    Does anobody know how to write SQL command to import whole table from one database to another?
    I have found in some SQL manual that INSERT INTO should work, but JET4 returns an error that table (e.g. c:\mydatabase\table1) can not be found.
    Thanks in advance
    Pawel

    if i don't have TEST table on server B whether COPY command will create this table on server B with the same structure ? If you specify CREATE as a clause the table will be created:
    SQL> help copy
    COPY
    COPY copies data from a query to a table in a local or remote
    database. COPY supports CHAR, DATE, LONG, NUMBER and VARCHAR2.
    COPY {FROM database | TO database | FROM database TO database}
                APPENDCREATE|INSERT|REPLACE} destination_table
                [(column, column, column, ...)] USING query
    where database has the following syntax:
         username[password]@connect_identifier

  • How to record partitioned tables in Data Modeler ?

    Hi,
    I have discovered the options for partitioned tables. Some questions remain, however.
    1) Static partitions
    For one table, a set of predefined partitions is set up in the data model. In certain situations, a new partition is added. Is it possible to generate alter table DDL from the model that will add this partition ?
    2) Dynamic partitions
    For another table, partitions are added and deleted on the fly (exhange partition). For this tabel, I would like to record just 1 partition, which is added when the tabels are created initially. It is not important to include the actual partitions when synchronizing with the database. Is it possible to skip this for a certain table (i.e. record this preference with the table, since it does not apply for all partitioned tables... ) ?
    Thanks,
    Richard.

    Hi Richard,
    For one table, a set of predefined partitions is set up in the data model. In certain situations, a new partition is added. Is it possible to generate alter table DDL from the model that will add this partition ?
    In Data Modeler version 4.1, ALTER TABLE ... ADD PARTITION statements are generated for new LIST partitions, but not for other types of partitions.
    For another table, partitions are added and deleted on the fly (exhange partition). For this tabel, I would like to record just 1 partition, which is added when the tabels are created initially. It is not important to include the actual partitions when synchronizing with the database. Is it possible to skip this for a certain table (i.e. record this preference with the table, since it does not apply for all partitioned tables... ) ?
    I've logged an enhancement request on this.
    Regards,
    David

  • Importing Partitioning tables, and Indexes

    Hello,
    during import of several partitioned tables, we had a strange problem. All non-PK indexes were imported into the partitioned tablespaces. PK indexes, did not seem to get created as local partitioned indexes. They have defaulted to a global PK in the a regular (read non-partitioned) tablespace.
    Is it normal ? Do we have to add any "special" commands or text to the import scripts for partitioned indexes ?
    Anyone, can you please post a reply to this, this has happened twice.
    Thanks, Sreedutt

    Note that this doesn't appear to be an ODBC-related question, but a question related to the Oracle import/export utility. Since there isn't an OTN forum that addresses this particular product, you're probably best served by contacting Oracle support.
    Justin Cave

Maybe you are looking for