How to import sharepoint modules in powershell ISE?

Hi All, could anybody tell mw how to import sharepoint modules in powershell ISE? just let the powershell ISE work as 'SharePoint 2010 Management Shell'. i don't want to download SPoshMod.
thanks, eric

Hi Joel ,
When I execute it I am getting the below error. Could you please share your thoughts on this.
Add-PSSnapin : The Windows PowerShell snap-in 'microsoft.sharepoint.powershell' is not installed on this machine.
At line:1 char:13
+ add-pssnapin <<<< microsoft.sharepoint.powershell
+ CategoryInfo : InvalidArgument: (microsoft.sharepoint.powershell:String) [Add-PSSnapin], PSArgumentException
+ FullyQualifiedErrorId : AddPSSnapInRead,Microsoft.PowerShell.Commands.AddPSSnapinCommand
-Vishnu

Similar Messages

How to Import Knowledge Modules

Hi,
I am patching the ODI to 10.1.5.3 and successfully updated the install folder and imported technologies as described in the patchset. At the end I find a last step to import Knowledge Modules, but I can't see how this step is performed.
Could you explain me how to do this?
Thanks
Fabio D'Alfonso

Hi,
In any of KM types, right-click and choose "Import KM" and, after that, in the first textbox, go the ODI install directory and drill drow until "impexp" directory (Example: C:\OraHome_1\oracledi\impexp).
Don't "open" the diretory, just choose it and click OK. The KM list should appears to you.
Works?
Cezar Santos
http://odiexperts.com

How to make intellisense enable in powershell in CSOM for sharepoint online?

how to make intellisense enable in powershell in CSOM for sharepoint online?
I am loading assembly as following
[Reflection.Assembly]::LoadFrom("$scriptdir\Microsoft.SharePoint.Client.dll")
[Reflection.Assembly]::LoadFrom("$scriptdir\Microsoft.SharePoint.Client.Runtime.dll")

Hi,
try this
http://powerguivsx.codeplex.com/
http://mackenzie-sharepoint.blogspot.com/2011/12/sharepoint-2010-powershell-intellisense.html
https://technet.microsoft.com/en-us/library/ff461033.aspx
https://social.technet.microsoft.com/Forums/windowsserver/en-US/fcb85984-abf9-428a-a2a7-952cec37ea49/powershell-ise-intellisense
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

How do I import a module for script use?

I have a script that uses the AD module for some operations. Here is the code:
#04/24/2014
#UsAer Logger
#Author: Alexander Bazzi
#Property of AerSale, Inc
Import-Module ActiveDirectory
$username=$env:username
$computerName=$env:computername
$userProperties = Get-ADUser $username
$departmentOU = ($userProperties.DistinguishedName -split ',OU=')[1]
$officeOU=($userProperties.DistinguishedName -split ',OU=')[2]
$pathOutUser = "C:\Scripts\UsAer_Logger\Output\$officeOU\$departmentOU.txt"
if(Test-Path $pathOutUser)
$computerName >> $pathOutUser
else {
New-Item $pathOutUser
$computerName >> $pathOutUser
When I try to run it on PowerShell ISE, I get the following exception:
Import-Module : The following error occurred while loading the extended type da
ta file:
Microsoft.PowerShell, C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Active
Directory\ActiveDirectory.Types.ps1xml : File skipped because it was already pr
esent from "Microsoft.PowerShell".
Microsoft.PowerShell, C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Active
Directory\ActiveDirectory.Types.ps1xml : File skipped because it was already pr
esent from "Microsoft.PowerShell".
Microsoft.PowerShell, C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Active
Directory\ActiveDirectory.Types.ps1xml : File skipped because it was already pr
esent from "Microsoft.PowerShell".
Microsoft.PowerShell, C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Active
Directory\ActiveDirectory.Types.ps1xml : File skipped because it was already pr
esent from "Microsoft.PowerShell".
Microsoft.PowerShell, C:\Windows\system32\WindowsPowerShell\v1.0\Modules\Active
Directory\ActiveDirectory.Types.ps1xml : File skipped because it was already pr
esent from "Microsoft.PowerShell".
I tried running it without the Import-Module cmdlt, but it didn't recognize the Get-ADUser command. If you could shed some light on this, I'd really appreciate it!
Many thanks in advance.
Best,
Alex

You have two different copies of Active Directory module installed.
Get-Module -list Act*
See if there is a second version. It is also possible that you are loading something in your profile that is loading those components. Try start PowerShell with the -NoProfile switch then import AD. If that works then inspect your profiles
- all of them.,
¯\_(ツ)_/¯

PowerShell: How do I get Powershell ISE to work within Service Manager Shell

I want to use PowerShell ISE from within Service Manager Shell.
When, from within the Service Manager Shell I type "ise" the PowerShell ISE launches but is not aware of the SCSM Cmdlets.
When I run:
PS C:\Program Files\Microsoft System Center 2012\Service Manager> Get-SCSMManagementPack
I get this error:
The term 'Get-SCSMManagementPack' is not recognized as the name of a cmdlet, function, scr
ipt file, or operable program. Check the spelling of the name, or if a path was included,
verify that the path is correct and try again.
At line:1 char:23
+ Get-SCSMManagementPack <<<<
    + CategoryInfo          : ObjectNotFound: (Get-SCSMManagementPack:String) [], Command
   NotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

Hi,
Try this before calling any SCSM cmdlets:
CD 'C:\Program Files\Microsoft System Center 2012\Service Manager\Powershell'
Import-Module .\System.Center.Service.Manager.psd1
For R2 adjust a path.
Cheers,
Marat
Site: www.scutils.com Twitter:
  LinkedIn:
  Facebook:

How to import Option 43 in Hex with PowerShell

Anyone know how to import option 43 in Hex value such as 1H03A802A?
The following script used by IPAddresses.
Import-Module .\Microsoft.DHCP.PowerShell.Admin.psm1
Import-Csv D:\dhcp.csv | foreach {Set-DHCPOption -Owner $_.Owner -OptionID 43 -DataType IPADDRESS -Value "192.168.121.11 192.168.121.12"}
DHCP.csv file as below
Name,ScopeAddress,SubnetMask,Gateway,StartAddress,EndAddress,Owner
Vlan001,192.168.112.128,255.255.255.128,192.168.112.129,192.168.112.170,192.168.112.254,DHCPSRV001/192.168.112.128
Vlan002,192.168.113.0,255.255.255.192,192.168.113.1,192.168.113.12,192.168.113.62,DHCPSRV001/192.168.113.0
Vlan003,192.168.113.64,255.255.255.192,192.168.113.65,192.168.113.76,192.168.113.126,DHCPSRV001/192.168.113.64

It is BYTE data type (binary). It neds to be "SET" as a byte array.
$byte=[byte[]]0,0,0x1A,0x3D
Note that the "hex" you posted is not hex. It has illegal character.
You can also build the string and convert it to a byte array.
¯\_(ツ)_/¯
Can I use the following? if not, can you let me know how to correct it? Thanks.
Set-DHCPOption -Owner DHCPSRV001/192.168.112.128 -OptionID 43 -DataType BYTE -Value "F1040AD9960A"

How to import a range in Function module?

I am using a Function module in which material is getting imported.
In the import tab we have
Parameter Name    Typing     Associated Type       optional          pass value
IM_MATERIAL       TYPE       MATNR                 <checked>         <checked>
So when the Function module is execute we can enter only one value into the IM_MATERIAL.
But now it has to be enhanced for entering multiple values. How to import the material as a range?
Please throw light.
Thanks.

Hi
If you are using a select-options you can use this approach.
TABLES: MARA.
DATA: RANGE TYPE WRF_MATNR_RANG_TTY.
SELECT-OPTIONS: SO_MATNR FOR MARA-MATNR.
START-OF-SELECTION.
RANGE[] = SO_MATNR[].
CALL FUNCTION 'ZTEST'
EXPORTING
   I_RANGE       = RANGE.
Where I_RANGE is defined using this table type WRF_MATNR_RANG_TTY
Parameter Name    Typing     Associated Type     optional          pass value
I_RANGE       TYPE       WRF_MATNR_RANG_TTY      <checked>     <checked>

How to create sharepoint Group with read only permissions using powershell for entire site ?

How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)

Hi
using (SPSite site = new SPSite(url))
using (SPWeb web = site.OpenWeb())
SPUserCollection users = Web.AllUsers;
SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
SPGroupCollection groups = Web.SiteGroups;
string GroupName = “Super Exclusive”;//your group name
string GroupDescription = “Super exclusive group description.”;
groups.Add(GroupName, owner, member, GroupDescription);
SPGroup NewSPGroup = groups[GroupName];
SPRoleDefinition role = Web.RoleDefinitions["Read"];
SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
roleAssignment.RoleDefinitionBindings.Add(role);
Web.RoleAssignments.Add(roleAssignment);
Web.Update();
Please 'propose
as answer' if it helped you, also 'vote
helpful' if you like this reply.

How to import a 2010 list or library into 2013

Hi,
Does someone have a good guideline or idea on how to import an exported 2010 list or library into Sharepoint 2013?
thanks for any help
regards
Martin

Though a little hands-on it is actually possible to do that without third party solutions! (with limitations)
On 2010 go into the list settings
Choose save list as template
Give it a name and check "Include content"
Download the .stp file from the list template gallery
Upload it to the list template gallery on your SharePoint 2010/2013 site
Create a list from it, the template should appear in the available templates when choosing the right locale
Voilá :-)
This also works from 2007 to 2010/2013 though it is a little trickier...
On 2007 go into the list settings
Choose save list as template
Give it a name and check "Include content"
Download the .stp file from the list template gallery
Rename it to .cab
Extract it
Open the manifest.xml
Change
<ProductVersion>3</ProductVersion>
to
<ProductVersion>4</ProductVersion>
Save
Pack everything with makecab.exe to a cab file (I'll come to that later)
Rename .cab to .stp
Upload it to the list template gallery on your SharePoint 2010/2013 site
Create a list from it, the template should appear in the available templates when choosing the right locale
So, now to the problems:
This does only work for lists/libraries with content less than 10MB :-(
This is a limitation of SharePoint and you cannot get arround that.
So that might most likely limit the approach to your task list.
Creating a CAB file is not really straigthforward. You need to create an inf file which describes the data which will be stored. See also here
http://msdn.microsoft.com/en-us/library/3h8ff753(v=vs.80).aspx
In some cases the template does not show up in the dialogs, then you can only create the list through PowerShell, i.e. like that
# important, upload the .stp file first to the list template gallery of the site of the web where the list should be created
$webUrl = "http://<yourweburl>" # web in which you want to create the list based on the custom template
$listTemplateName = "<yourlisttemplatename>" # the name with which you saved the list into the list template gallery
asnp Microsoft.SharePoint.PowerShell
$web = Get-SPWeb $webUrl
$listTemplate = $web.Site.GetCustomListTemplates($web)[$listTemplateName]
$Web.Lists.Add("ListName", "", $listTemplate);
4. Lookup columns are referenced with the list instance guid. As a result you would require to create the lookup lists first, then update the guid in the manifest.xml and then create the other list
5. Manage Metadata columns won't work unless you migrated the data base too from 2010 to 2013 and the guids of the terms remain.
Some time ago I wrote a PowerShell script which takes care all the above for you (including lookup columns), but this was still from 2007 to 2010.
I need to test it first on 2013 before I am going to post it here.
SharePoint Architect, Speaker, MCP, MCSE, MCSA, MCS, MCPD, MCITP, MCTS, SCRUM Master/PO
Blog: www.matthiaseinig.de, Twitter:
@mattein
Projects: SharePoint Code Analysis Framework (SPCAF),
SharePoint Software Factory,
SharePoint Solution Deployer

How to import Photos into Active Directory

Hi -
IT Director asked me to import employees pictures into Active Directory so that we can use them in Outlook, SharePoint, Lync etc.
Do you know how to import pictures into Active Directory?

Thumbnailphoto Attribute in active directory is responsible for adding photos to Active directory.
By Default Replication of this attribute will be disabled to Global catalog server. To make use of this facility we will have to enable replication of this attribute to Global Catalog. ( To accomplish this you will have to edit the schema using Active directory
schema snap in).
Refer Below link which explains about enabling the replication of Thumbnailphoto attribute to Global catalog.
http://www.msexchange.org/articles_tutorials/exchange-server-2010/management-administration/configuring-using-display-picture-exchange-server-2010.html
Requirements
Minimum requirement for your exchange enviornment to use this - Exchange 2010.
Exchange 2007 Don't support uploading photos AFAIK.
Domain controller should be running with atleast windows server 2008 or later. And
schema has to be windows server 2008
Additionally for your information,
How to remove the uploaded photos?
Either You can edit the Thumbnailphoto attribute using ADSIedit and remove the entry which is assocaited with Thumbnailphoto attribute.
Or,
Try this.
The Import-RecipientDataProperty and Export-RecipientDataProperty cmdlets allow you to import and export the photo blob to and from
thumbnailPhoto attribute, but there's no Remove-RecipientDataProperty cmdlet to remove it. You can use the
RemovePicture switch of Set-Mailbox cmdlet to remove a user's photo. For example:
Set-Mailbox "Bharat Suneja" -RemovePicture
Check out the below link which explains in and out of uploading photos,
http://blogs.technet.com/b/exchange/archive/2010/06/01/gal-photos-frequently-asked-questions.aspx
http://blogs.technet.com/b/ilvancri/archive/2009/11/17/upload-picture-in-outlook-2010-using-the-exchange-management-shell-exchange-2010.aspx
To know about uploading photo using powershell ask this question in powershell forum
http://social.technet.microsoft.com/Forums/en-US/winserverpowershell/threads
Regards,
_Prashant_
MCSA|MCITP SA|Microsoft Exchange 2003 Blog - http://prashant1987.wordpress.com Disclaimer: This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Connect-MsolService error after importing MSOnline module

I'm receive the following error when I run Connect-MsolService -
Exception of type 'Microsoft.Online.Administration.Automation.MicrosoftOnlineException' was thrown. + CategoryInfo : OperationStopped: (:) [Connect-MsolService], MicrosoftOnlineException + FullyQualifiedErrorId : 0x80090345,Microsoft.Online.Administration.Automation.ConnectMsolService
+ PSComputerName : xxxxx
Background - I am using powershell to manage Active Directory, Exchange and Sharepoint Online user data. I have an SSIS package that dynamically builds arguments passed to powershell scripts for creating new and updating existing AD user data, adding/updating
necessary security and distribution groups for each user, enabling exchange mailboxes, and passing custom attribute data to Sharepoint online user profiles.
In effort to maintain the purity of the SQL server running the SSIS package, dynamic sessions are created to servers having the modules necessary for import. This allows me to do all of the things mentioned above without having to install the different modules
on my SQL server.
My final hurdle is automating the Office 365 licensing. To script licensing assignments I create a session to our server having the necessary MSOnline module and import it giving me access to the Cmdlets, like Set-MsolUserLicense. However, before I can use
the Cmdlets I have to connect to the MSOLService.
When I run Connect-MsolService, the credentials modal pops as expected, the appropriate credentials are entered (which have been verified a thousand times over), and I receive the error shown above.
These commands all work fine when I run them from the server where the MSOnline cmdlets are installed, but return the error when run post successful import-module on my SQL server.
Here are the commands used for establishing the session and importing the MSOnline module -
$securePassword = ConvertTo-SecureString $Password -AsPlainText -Force
$cred = new-object -typename System.Management.Automation.PSCredential -argumentlist $Username, $securePassword
$outputSession = $Null
foreach($session in Get-PSSession){
if(($session.ComputerName -eq $Server) -and ($session.Availability -eq "Available")){
$outputSession = $session
if ($outputSession -eq $Null){
$outputSession = New-PSSession -ComputerName $Server -Credential $cred -Name 'MSOnline'
Invoke-Command -Session $outputSession -ScriptBlock {Import-Module MSOnline}
Import-PSSession -session $outputSession -module MSOnline -AllowClobber
Connect-MSOLService is the only Cmdlet giving me an issue using these methods. Any help you can provide will be appreciated.

Thanks, Malar. We'd hope to accomplish the connection without having to install anything locally. However, after much trial and error and discussion with Microsoft support team we settled on that the components must be installed locally to work.
So, we finally gave up attempting to use the tools from a remote server, installed the MSOL sign-in assistant and the Azure Active Directory module for Powershell locally and were able to complete the connection.
Rocky

Load exchange 2013 module in powershell

Dear Exprt,
How would i load exchange 2013 module in powershell from windows 7 client
i have admin privilege i can work from provided web link but using this link cannot load exchange 2013 in powershell
$credential = get-credential
$session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://exchange2013.micex.com/ -Credential $credential
Import-PSSession $session
i have tried by different ways by changing url (ConnectionUri https://exchange2013.micex.com/powershell/) also not able to load in powershll
[email protected]

Here is error
Althought i enter in this (-ConnectionUri
https://exchange2013.micex.com/POWERSHELL)
New-PSSession : [exchange2013.micex.com] Connecting to remote server exchange2013.micex.com failed with the
following error message : The WinRM client cannot process the request because the server name cannot be resolved. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:2 char:12
+ $session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri ht ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException
    + FullyQualifiedErrorId : ComputerNotFound,PSSessionOpenFailed
Import-PSSession : Cannot validate argument on parameter 'Session'. The argument is null. Supply a non-null argument and try the command again.
At line:3 char:18
+ Import-PSSession $session
+                  ~~~~~~~~
    + CategoryInfo          : InvalidData: (:) [Import-PSSession], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationError,Microsoft.PowerShell.Commands.ImportPSSessionCommand
[email protected]
try connectionuri
http://exchange2013.micex.com/powershell
instead of
https://exchange2013.micex.com/powershell
MCITP - Exchange 2010 | MCITP - Windows Server 2008 R2

How to create function module for getting customer name

Hi Experts,
How to create function module? when in import parameter kunnr values to be passed it must give name1 details according to the customer number...
how to write the logic in source code....
Regards,
Thiru. R

1. First of all create function group.
2. Create function module using this function group.
3. If only one kunnr is needed at a time, create import parameter for it. But if many kunnr to be entered at a time,use table.
4. Fetch name1 for each kunnr from KNA1 table.
"->> if many kunnr
if not t_kunnr[] is initial.
select kunnr as kunnr name1 as name1
into table t_kunnr_name1
from kna1
for all entried in table t_kunnr
where kunnr = t_kunnr-kunnr.
endif.
sort t_kunnr_name1 by kunnr name1.
delete adjacent duplicates from t_kunnr_name1 comparing kunnr name1.
table t_kunnr_name1 will contain kunnr and its name1.
I hope logic is clear for you now.
Regards,
Aparna

Problem importing a module and finding it's commands?

Hi,
I have a problem. I'm trying to import the DFSR module and use it's commands in my PS session.
But, I can't get the commands to show.
I've looked in my system32 directory and I can see the DFSR module folder.
But when I run the command to import the module nothing happens, and it's not showing in my Module window in the ISE.
What could be going wrong?
Thanks

Get-Module -List DFSR
Where did you save the module to?
Modules should be saved to the Modules folder of the profiles folder.
dir "$(Split-Path $profile.CurrentUserCurrentHost)\Modules"
dir "$(Split-Path $profile.AllUsersCurrentHost)\Modules"
¯\_(ツ)_/¯

How to import a image and compare with another image to find their deviation

i am new to labview , can anyone tell how to import a image and compare it with another image to find their deviation
Solved!
Go to Solution.

This is an quite easy task using the Vision Development Module.
There you can acquire images from cameras or read them form the harddrive, then differntiate them or since VDM 2010 calculate the optical flow between consecutive images.
Christian

How to import sharepoint modules in powershell ISE?

Similar Messages

Maybe you are looking for