How to include additional information in the notification emails

Hi!
As we know when Portal Admin creates a user,and if configured to send email, an email is sent to the new user informing about their username and password.
Now my question is there any way possible to include additional message in those notificatin emails. If yea ,how?
thanks for your help
Regards
Suresh

Hi Suresh,
I hopt this <a href="http://help.sap.com/saphelp_nw04/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm">link</a>will solve your problem. Dont forget to reward points.
Thanks Mitts

Similar Messages

  • MOSS 2007 Alerts - Duplicate information on the notification email

    Hello, we are having the following issue, when receiving an out of the box alert, the information on it is triplicated. Have you have seen this issue before? We have some code on the list library but that shouldn't affect an out of the box alert. Example
    below

    Maybe I wasn't very clear again.  What I understood is that you are taking your FormsCentral PDF with a FormsCentral Submit button that sends the data to FormsCentral, and you are modifying that PDF in Acrobat adding an additional button for users to click on which when clicked attaches the PDF to an email to you.  With this modification you end up with a PDF that has two submit buttons which you stated was confusing for the user...
    I have tested combining both of those buttons into one (and included instruction to the user that it will do two things).  I edited the FormsCentral Submit button and added an additional action to the button for the attach PDF to Email.  This modified single button does both, creates an email in the default email client with the form attached, and submits the form data to FormsCentral.
    That may or may not be useful to you but I wanted to make sure at least that I have explained it more clearly.
    Thanks,
    Josh

  • How to include Excel file in a notification email.

    Hi All,
    Their is a new requirement came in my application.
    We have a bunch of reports on this website(application) and we have a requirement around this
    1. Provide user with a facility to save the report for himself/herself(Interactive report).
    2. This saved report should be sent via an email on a weekly/monthly/daily basis based upon what the report displays everyday. E.g. today Apr-6, if the report displays 100 records, then an email with those 100 records (attached as a spreadsheet) will be sent to the user who saved this report. Tomorrow, Apr-7, if the report shows 55 records, then this should be emailed to the user. The period to send an email can be variable - every day, every week, etc; but can this be scheduled?
    Please anyone can suggest me whether this requirement is possible to do!If it is possible then how can i implement?
    Thanks & Regards,
    Ramya.

    Yes it's possible with some custom coding.
    Ask Tom has shown it's possible to create csv files given a query, which Excel will open as a spreadsheet:
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:95212348059
    You could then create a custom procedure using the utl_smtp package to send a mail with the attachment:
    Re: Sending UTL_SMTP mail with single jpg attachment issue
    Finally you would set up a DBMS job or cron entry to run on whatever schedule you need (daily/weekly/monthly).

  • ID CS5: How to include additional text into a table of contents and how to hide text from it?

    I have the following problem:
    1. I'd like to include additional Information in my table of contents which I don't want to appear in the text I refer to.
    Example: I do have a picture with a caption saying:
    picture 1: Blablabla.
    And I want to have the source of the picture as additional information in the table of contents:
    picture 1........Blablabla (source: thisandthat)........23
    Still I don't want this additional content to disappear, as soon as I update the table of contents!
    How can I achieve that?
    2. And how can I have this the other way round?
    Let's say I want the source in the caption, but not in the table of contents.
    So the caption says:
    picture1: Blablabla (source: thisandthat)
    but the table of content says:
    picture 1........Blablabla.....................23
    I was trying to achieve this by two different praograph styles in the caption. One which would be listed, and one which wouldn't be listed, but this of course resulted in always having two paragraphs in the caption, which I'd like to avoid:
    picture1: Blablabla
    (source: thisandthat)
    Any solution to this?
    Best Regards,
    Rainer Schwachsinn

    Sorry, missed the second part of the question. I think the only way to do that is to use invisible "dummy" text of some sort, and if you're going to do it for some entries, you might as will do it for all.
    One of the easiest ways is to put the text you want inthe TOC into an anchored frame attached to the actual heading in the text (so it moves along with it). Use a unique paragraph style for this text, and include this style, not the one applied to the headings inthe text, to make the TOC. I usually use a character color of red to make it satnd oout so I don't forget it's there, and the position on the page isn't really critical. Select the anchored frame, open the Attributes panel and make it non-printing. You'll see it in editing mode, the TOC will pick it up (as will variables, if required) but it will disappear on output.

  • Information in the notification address "Search Term 1/2".

    Hi Experts
    In my company we populate information in the notification address "Search Term 1/2". We can use this information to filter upon execution of reports IW28/9. However this information does not appear on any of the report output. Does anyone have an idea how this fields can be included on the report outputs?

    Hi,
    Modify your layout
    select coloumns like Address no.,postal code,region,location,street etc in your layout. prior to that you must maintain this information in customer master.
    kapil
    Edited by: Kapildev Farakte on Nov 2, 2009 12:51 PM

  • How to  show additional items in the same window using stacked canvas

    How to show additional items in the same window using stacked canvas.
    My content canvas has 14 items, and I have to include more.
    I want to know how I can use a stacked canvas to show these additional items in the same window, so that I can scroll through horzontally , as if all the items are on one canvas.

    Well, I intially navigate into my content canvas. At this stage the stacked canvas is not visible, then how should I navigate to an item on the stacked canvas to make it visible?

  • How to display additional fields in the results a 'search user'?

    This may be a newb question but how can I display additional user attributes in the results of a user search in the admin console?
    i.e. more than just the standard fields of: User ID, First Name, Last Name, Status, Enable, Disable, Unlock and Delete.
    I would like to include some UDFs that I have defined for the create user form e.g. personnel number.
    Thanks,
    Bernie

    Thats not gonna work for sure. Thats to include additional attributes in the search input parameters drop-down. There is another procedure to do that, but not very sure if it works or not because once I was decompiling the code and found that it doesn't have an implementation. You can anyway try it out, the worst would be that you would not be able to see the column headings, but try atleast:
    And thats through the use of properties file. Open up ** and search for the following section-
    *#global.request.users.selectedListDisplayFields=*
    *#global.request.users.selectedListDisplayFields.lables=*
    Remove the comments and update it to below-
    global.request.users.selectedListDisplayFields=USR_UDF_EMPID
    global.request.users.selectedListDisplayFields.lables=global.xmlmetadata.users.USR_UDF_EMPID
    where USR_UDF_EMPID is the UDF and global.xmlmetadata.users.USR_UDF_EMPID is its associated translation.
    Thanks
    Sunny

  • Please restore e-mail or at least give us some real information.  Tech support is almost smug in their response for additional information.  The iCloud status page has said the same thing since yesterday.  A real dis-service.  My business depends on this!

    Please restore e-mail or at least give us some real information.  Tech support is almost smug in their response for additional information.  The iCloud status page has said the same thing since yesterday.  A real dis-service.  My business depends on this!  Any one have any suggestions not being offerd by tech support or Apple?  Anything at all?

    mdjb wrote:
    I just lost a big opportunity to get a new client because of this!!   almost 24 hours now without any email service. I was one of the original.mac customers.  I am over this time to move on. It is an inferior product.
    My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
    APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
    And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service.

  • Customer or vendor master data to include additional information ?

    Any standard Report of customer or vendor master data to include additional information ?

    Hi Goutam
    Can you please be specific??
    When you say standard report, what do you mean by "to include additional information"??
    Thanks
    G. Lakshmipathi

  • I do not want to update to Lollipop right now.  How can I get rid of the notification that wants me to install.  It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?

    I do not want to update to Lollipop right now.  How can I get rid of the notification that wants me to install.  It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?

    You cannot stop it from popping up.
    it will continue every few minutes until its installed.
    just keep using the back button near right side of home button.

  • How to  include a report  into the  SAP-SCRIPT

    plz tell me 
    How to  include a report  into the  SAP-SCRIPT
    ASAP

    creat a z report like this....................
    REPORT  zmmgl_picklist1.
    TABLES : likp,ltap,ltak.
    data : lv_NUM1 type c .
    data : lv_NUM type c.
    *&      Form  get_data1
          text
         -->IN_DATA    text
         -->OUT_DATA   text
    FORM get_data1 TABLES in_data STRUCTURE  itcsy
                         out_data STRUCTURE itcsy.
    READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
    lv_NUM = lv_NUM1 + 1.
    out_data-name = 'lv_NUM'.
      out_data-value = lv_NUM .
    APPEND out_data.
    endform.
    *&      Form  get_data
          This form is to read  details from  LIKP    *
         -->IN_DATA    text
         -->OUT_DATA   text
    FORM get_data TABLES in_data STRUCTURE  itcsy
                         out_data STRUCTURE itcsy.
      READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
      Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
      out_data-name = 'LIKP-BLDAT'.
      out_data-value = likp-bldat.
      APPEND out_data.
       READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
      Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
      out_data-name = 'LIKP-VSTEL'.
      out_data-value = likp-vstel.
      APPEND out_data.
    READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
      Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
      out_data-name = 'LIKP-KUNNR'.
      out_data-value = likp-kunnr.
      APPEND out_data.
    ENDFORM.                    "get_data.
    after this go to the script editor......
    /: perform get_data in program zmmgl_picklist1.
    /: using &ltap-vbeln&                 (Reference field.this field          should be there in both program and script.....)
    /:changing &likp-bldat&         
    /:changing &likp-vstel&
    /:changing &likp-kunnr&
    \[removed by moderator\]
    Regards
    Anbu
    Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM

  • How to include a jButton in the jTable CellEditor?

    sir,
    how can include a jButton in the jTable cell Editor as we include checkbox & Combo inthe Cell Editor?
    thks.

    There is c:import tag in the JSTL that will include the HTML from a file on another server.

  • I downloaded lion but lost the setup assistant.  please help me recover the setup assistance.  i do not know where/how to find/enter information in the terminal.

    i downloaded lion but lost the setup assistant.  please help me recover the setup assistant.  i do not know where/how to find/enter information in the terminal as was suggested.

    Launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.   Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    sudo rm /var/db/.AppleSetupDone
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. Confirm.
    Reboot. The Setup Assistant will launch.

  • How can I obtain information about the recently finished commands?

    How can I get information about the recently finished jobs / bash commands? (eg. date / time of termination)

    $ e echo foo
    foo
    $ type e
    e is a function
    e ()
    $@ && echo $@ - $(date) >> test.txt
    $ cat test.txt
    echo foo - Wed Jan 1 12:10:54 CET 2014
    $ e echo bar
    bar
    $ cat test.txt
    echo foo - Wed Jan 1 12:10:54 CET 2014
    echo bar - Wed Jan 1 12:11:09 CET 2014
    $ e htop
    <here I do something with htop for a little while>
    $ cat test.txt
    echo foo - Wed Jan 1 12:10:54 CET 2014
    echo bar - Wed Jan 1 12:11:09 CET 2014
    htop - Wed Jan 1 12:15:14 CET 2014
    Last edited by karol (2014-01-01 11:20:36)

  • HT4539 how do I download information from the cloud.  I just purchased a new phone?

    How do you download information from the cloud?  I just purchased a new phone?

    What information are you referring to?  You may mean restoring an iCloud backup from a previous device.  Or you may mean adding iCloud calendars, contacts, etc. to your iPhone.
    In the former case (restoring a backup), the setup assistant should walk you through that process.
    In the latter case (adding contacts, etc.), simply set up your iPhone as an iCloud device in Settings > iCloud.

Maybe you are looking for