How to include uninstaller in installer?

The thing is that application installer in 8.2.1 i can only be used to actually install apllication. If you run it again it will not offer you to modify or reinstall or uninstall your current program. In ver 7+ it was different. Use installer once and you install use it second time and it will act as uninstaller. So the question is how to uninstall custom LV built application without using Control Panel. I can not find a right "checkbox" or anything like that in build configuration so any ideas would be appreciated.
www.xinstruments.com
Custom Software for Industrial Automation
www.hdrconverter.com
Picture processing made easy

Hi,
I’m afraid there is no built-in way to uninstall everything an installer installs without going into the control panel.
Charlie M. CLD

Similar Messages

  • How to include Add-On in EHP4 Installation

    This is a fresh install on Unix and Oracle.
    We have already installed ERP 6.0 EHP4 Ready and now preparing for EHP4 Install using EHP Installer. We have two Add-Ons CPRXRPM 400 and ECC-SE 604 that we want to include in EHP4 installation. We have already copied the .SAR files for both Add-Ons into Download Directory.
    I am not able to figure out how to make Installer pick up these Add-Ons. In BIND_PATCH step and (also in screen where it displays calculated queues) I  see all the patches that we downloaded from Solution Manager are listed but do not see my Add-ons. At what stage will these be included or do I need to do something to add them manually.?
    Zak

    Hi,
    When you will download the patches from solution manager there you need to select Technical Usage corresponding to these packages then information about these technical usage will be present in stack xml file. So, ehpi installer will read about these packages from stack xml file and include them in upgrade.
    Thanks
    Sunny

  • How to include required hardware drivers (eg Agilent E5515C) to installer?

    Please advice how to include the reqiured instrument driver to the installer?

    Hi Eva,
    Many instrument drivers that are specifically for LabVIEW are simply a group of VIs. Most of the time, when you use these VIs in a project, they are automatically included under Dependencies. LabVIEW should add only the VIs you used in your project and you can see what gets added by expanding Dependencies.
    I’m not sure about the E5515C, but if it is similar to most drivers for Agilent equipment, you can probably manually add the libraries (.LLB) to the project under My Computer. By dragging and dropping a .LLB on My Computer in your project, you should see a folder created and that folder should contain all the VIs in that .LLB. These can then be set as source files in the installer and will be place on the target machine.
    Finally, if your ultimate goal is to have the instrument driver installed on the target machine in the same way as it is on your development machine, this is probably best left as a separate install. The information in the two above paragraphs is relevant to simply distributing a working application not recreating a development environment.
    Charlie M. CLD

  • How to include a font in the installer?

    Hi all!
    My program uses a custom font (namely popular NI7seg font) that I would like to include in my installation distribution.
    I am using LabView 8.5 and I have tried force the installer (normally through the options window) to copy the font into [WindowsFolder]\Fonts folder and to add a registry key.
    After installation I have noticed that the font actually is added into the registry however it has not be copied to the fonts directory.
    Any ideas?
    Regards,
    Michal
    Solved!
    Go to Solution.

    Hi Michal,
    At first, you should add the font file to LabVIEW project.
    Then create a Source Distribution from build specification. In the source distribution setting, you can specify where to distribute the font file.
    When you build your installation, you add the source distribution as source file to installer.
    I'm not sure if you can skip step 2 to add the font file as source file to installer, but source distribution could work correctly.

  • How to include Office 2011 in SIU NetRestore workflow?

    I am trying to build a modular workflow to perform a NetRestore of Lion, rather than the old fashioned way of cloning a system.
    I am using SIU 10.7.3 on a 10.7.4 client iMac. Our servers are running 10.6.8 Server. I am also trying to follow the directions from the 10.6 Deployment book from Peach Pit, as well as looking things up in SIU's built-in Help and I am running into problems.
    Firstly, I am not clear on how to install 3rd party apps such Office 2011 or apps that install via .mpgks. I created a couple of test Workflows and when I tried to include the Office installer, it would fail at the very last step of the NetRestore. Mpgks would not even install at all.
    I am also not clear on how to inlcude apps that do not install via packages, such as Firefox.
    Secondly, documentation is confusing regarding workflows that work for Netinstall and Netrestore. The Add User action is only available for NetBoot workflows and not NetInstall modular workflows, which doesn't really make sense.
    Why is the Add Packages and Post-Install Scrpits available only on NetInstall images? It makes more sense to me that this action should be available for NetRestore workflows.
    Thanks in advance.

    I think I may have solved my own problem: i am guessing i have to extract packages, or installers, from the Office 2011 installer and make a new package with PackageMaker.
    I also think i need to make an installer package for Firefox.
    If i am correct, can anyone recommend a better tool to make packages? Pacifist with Iceberg?
    Or if i am not correct, please let me know the best way to accomplish what i am trying to do.

  • How to include libraries properly in an application

    Hello,
    I am working on a project that uses an external device.
    I installed software for this device that includes drivers and libraries (.dlls) to be used with LabView.
    To communicate with the device, I use the "create Active-X object" block.
    As the Active-X input, I create a new input and pick the right class from the drop down list.
    This does not add any dll files to the dependencies of the project.
    LabView seems to be assuming that the necessary files are there.
    I want to install this application on another computer that does not necessarilay have the software for the device installed.
    My application fails. There's no error message of any missing library whatsoever.
    I have to add the necessary libraries manually.
    How should I do this?
    1) I could add the library files to the project directly.
    2) I could add the library files to the installer off my application, so that they are properly installed along with my application.
    I'm not sure how to do this.
    How do I tell the installer to install* the library files?
    (* what I mean with that is to place them in the proper folder. Sure, the application folder is also searched for dlls upon execution but that means every application has its own dll, which seems to be a bad approach)
    3) I could add the Redistributable .exe file to the installer of my application as an installer.
    I'm not sure how to do this either.
    Should I add the .exe file to the project, copy it to some location(which one?)  during installation and then execute that file after the installer finished?
    Or should I add this installer to the list of "additional installers"? It seems like one can only add NI installers. How do I add mine?
    Or is there another way I should do this?
    Thank you for your help.
    Solved!
    Go to Solution.

    Nope, files in Temp are not automagically deleted by default. What you could do instead is either invoke the installer directly from your install media using a relative path or you could write a good 'ol batch file and invoke that instead at the end of your installer. This would start the actual driver installer and wait for it to finish. Then cleanup whatever needs to be cleaned up afterwards.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • How to include LabView Instr.llb in a TestStand deployment​?

    I want to deploy my Test Stand sequenze file. When i install the deployment and want to let run it shows that it can t find all of the sub VIs whitch i used direct from LabView. For example: VISA Configure Serial Port (Instr).vi or Check if File or Folder Exists.vi . How to include this VI s to the installer?
    Solved!
    Go to Solution.

    Depending on your settings, those should already be part of the deployment.
    You miss the dependencies from vi.lib, instr.lib and/or user.lib. In the worst case, you will have to create custom Source Distributions in LV to pack those components. When configuring those, you have to make sure that the checkbox "exclude vis from the vi.lib, user.lib and instr.lib" is NOT checked (by default it is).
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How to include another msi with LV application builder?

    I can use LV application builder to create an installer for my application. But my application relies on a 3rd part msi, which should be run after my application is installed.  So how to include this msi with LV app builder? Thanks in advance.

    I would recommend executing a batch file that launches your other installers after your LabVIEW executable finishes installing. The process of doing this (in addition to other suggestions about including 3rd party installers) can be found in the Knowledgebase linked here.
    Kind Regards,
    E. Sulzer
    Applications Engineer
    National Instruments

  • How to include old invoices in the invoice list

    How to Include old billing documents in the invoice list.
    TO be more clear:-
    I created 20 invoices in the monthof JAN
    I maintained the factory calender in the payer master in the month of Feb 1st and created 10 more invoices in this month.
    So the system is considering only the invocies which were generated after I maintained the factory calender (Only feb invoices).
    Is there any process to include the previous invoicies (Jan invoices)  also to get include in the invoice list.
    Help me in this regards.
    Regards,
    Mallesh.

    It is not possible.
    Regards,
    Rajesh Banka

  • How to include a jsp page in another jsp jsp page

    hi,
    i m trying to include a jsp page name "header.jsp" into one jsp page name"selectattribute.jsp" i m using these commands in "selectattribute.jsp"
    <%@include file "header.jsp"%> bcz both these jsp page are C:\program files\tomcat 4.0\webapps\examples\jsp\Poject\
    but the problem is that , i m invoking this jsp page "selectattribute.jsp" from a servlet reportcontroller.java using REQUEST DISPATCHER.
    the servlet is in
    C:\Program files\tomcat 4.0\webapps\examples\WEB-INF\classes\Project\
    i want to know how to include some other jsp page in a jsp page and how to invoke applet from jsp page when that particular jsp page is being invoked by servlet.
    plz help
    manish

    use this for including in your selectattribute.jsp
    <jsp:include page="header.jsp" flush="true"/>
    I never tried calling an applet. I think you can write the code for calling the applet in a javabean method and call the method in the jsp

  • How to include one view into another view

    Hi SDN's,
                   Could any please tell me,How to include one view into another view.
    In my requirment.I want to create a 'Z' view for an interface .In that  view i have to take,
    1) Ship-to-email adrr by
                              LIKP-KUNNR -> KNA1-ADRNR
                              KNA1-ADRNR -> ADR6-ADDRESNUMBER.
    2) E-mail addr of person who created the document.i.e
        LIKP-ERNAM -> USR21-BNAME.
        USR21-ADDRESNUMBER ->  ADR6-ADDRESNUMBER 
        USR21-PERSNUMBER -> ADR6-PERSNUMBER.
       In both the case we have to pass ADDRESSNUMBER to ADR6 table.
    If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
    So i created two which fetches only the email addr of  person who created the document.and another view fetches Ship-to-email addr.
    Now i want to include the second view into first view . Is it possible?or please
    tell me someother way to get these email addresses in a single view.

    hi
    as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
    regards,
    shamim

  • How can I change the installation path  of JWS?

    I have to install the JRE 1.4.0_01 in silent mode on Windows XP. For the JRE I can set the installation path in the corresponding dialog and record it in an *.iss file. When starting the silent installation the JRE is correctly installed into this path but the Java Webstart installation procedure doesn't care about this path and installs JWS in 'D:\Programme\Java Web Start'.
    How can I change the installation path for JWS?
    J�rg

    Verify Free Disk Space. Assuming you are installing the OS to the C: drive.

  • HOW to include a reference currency fields in a view ?

    Hello Experts,
    <b>I am having Currency fields error in generic extraction</b>
    I have table where I am trying to extract data to BW via generic extraction. When I tried
    to extract with the TABLE its giving me an error
    <b>Invalid extract structure template RPSCO of DataSource ZBW_REP3_TEST
    You tried to generate an extract structure with the template structure RPSCO. This operation failed, because the template structure quantityfields or currency fields, for example, field WLP00 refer to a differenttable</b>.
    Now I created a view with all the fields same as my table.
    But its still giving me the same error and taking all the fields as a primary keys. I have over 12 currency fields in the table. I am confused how to fix this issue and add a currency field to my view?
    hOW to include a reference currency fields in a view ?
    All inputs are much appreciated.
    Thanks and Regards,
    Harish

    Thank you for your responce,
    Can you please check my view and let me know where I am going wrong     
    View    Table   Field  Dataele  Data
    field                    type                                            0                                                                
    WLP01     RPSCO     WLP01     BP_WPL     CURR     15     Period value in ledger currency
    WLP02     RPSCO     WLP02     BP_WPL     CURR     15     Period value in ledger currency
    WLP03     RPSCO     WLP03     BP_WPL     CURR     15     Period value in ledger currency
    WLP04     RPSCO     WLP04     BP_WPL     CURR     15     Period value in ledger currency
    WLP05     RPSCO     WLP05     BP_WPL     CURR     15     Period value in ledger currency
    WLP06     RPSCO     WLP06     BP_WPL     CURR     15     Period value in ledger currency
    WLP07     RPSCO     WLP07     BP_WPL     CURR     15     Period value in ledger currency
    WLP08     RPSCO     WLP08     BP_WPL     CURR     15     Period value in ledger currency
    WLP09     RPSCO     WLP09     BP_WPL     CURR     15     Period value in ledger currency
    If I add a
    Table TCURC against any field what would be the view field and data element
    Do I need to tick MOD?
    Please suggest.
    Kapadia,
    If I do that its still taking all the fields are a primary keys and bringing 6 lakh records to where I originally have 49 records in a table
    Thanks and Regards,
    Harish

  • How to include a license header in fxml file?

    How to include a license header in fxml file?
    I tried xml block comments <!-- mylicense here -->
    but it wasn't accepted by screen builder.
    Also I wondered, even if it had been accepted, would screen builder have saved the header back - or deleted it?

    All XML documents should begin with an XML declaration.
    If you have your fxml file starting with  the following lines :
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- mylicense here -->
    .. it will be loaded in Scene Builder, and saved back as is.

  • I would like to know how to include entries in my TOC that refer to paragraph styles that a before the TOC.

    I would like to know how to include entries in my TOC that refer to paragraph styles listed before the TOC.
    Example:
    page i. Title Page
    page ii. Abstract
    page iii. Table of Contents
    I want the TOC on page iii to include the entries "title page" and "abstract". Is this possible?
    Thank you-

    Thesis formatting rules.
    Can you answer another question?
    How do I change the text for a TOC entry? For example,
    I have selected the title on my first page, for example "Summer Report" and selected a paragraph style for it, and added it in the TOC. Now the TOC will have this entry for "Summer Report" and the associated page. But I want it to say "Title Page" instead. Can I edit this text? In order words, have the TOC point to something with whatever name I want to give it, even though it is not the actual name of the section?

Maybe you are looking for