How to increase internet speed on firefox os based phone?

Browser takes lots of times to load the pages.... Please make available some third party browser like opera mini.... Plz. ..

Hi ranjit0343,
I understand that you are experiencing slowness when navigating in the browser of your Firefox OS device, and that you would like third-party browsers to be available for download.
The development of third-party browsers depend only on the developers of said browsers. You may contact Opera directly and request that they make a version of their browser that is compatible with Firefox OS.
Regarding the slowness that you are experiencing, please reply to this message with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [http://mzl.la/Gzz6Kp this link] if you need help finding the Build ID of your phone.
* Please provide the exact steps to reproduce the issue you are encountering, including any webpages you are experiencing slowness.
* Who is your current cell phone carrier?
* How often do you encounter this issue? Does this also happen when connected to a stable Wi-Fi connection?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we will have all the information needed to investigate into this. Thank you for your help and we look forward to hearing from you!
- Ralph

Similar Messages

How to increase the speed of video (avi file) using labview

How to increase the speed of video (.avi file) using labview? I have tried this by skiping alternate frames. also I have used minimum time delay.Is there any other option for which i can go?
please suggest me...........

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

How to increase the speed of Zoom on TIFF image

Hi everyone,
i m doing zooming operation on tiff image.
when i applied zoom in operation on image which have properties
Bit per sample =1
Image Length = 2200 Pixel
Image Width = 1700 Pixel
Resolution(x) = 200 dpi
Resolution(y) = 200 dpi
then it require 2 sec.
then i apply the same code with tiff image which have properties like,
Bit per sample =1
Image Length = 3300 Pixel
Image Width = 2500 Pixel
Resolution(x) = 300 dpi
Resolution(y) = 300 dpi
then it require 9 to 10 sec.
my code is:
RenderedImage src= oriRndImage[selectedButtonIndex];(orirndImage is Rendered
Iamge)
//Transfer Current RenderedImage object into BufferedImage object
Raster ra= currRimage.getData(); //it take time.
DataBuffer db = ra.getDataBuffer();
SampleModel sa = ra.getSampleModel();
ColorModel cm = currRimage.getColorModel();
final BufferedImage currImage = new
BufferedImage(cm,Raster.createWritableRaster(sa,db,null), false, new
Hashtable());
//Create new Bufferred Image
BufferedImage bi = new BufferedImage(zoomW,zoomH, BufferedImage.TYPE_INT_RGB);
Graphics2D g = bi.createGraphics();
double scaleW = (double)(zoomW)/(double)(prev_width);
double scaleH = (double)(zoomH)/(double)(prev_height);
transAtZoom = AffineTransform.getScaleInstance(scaleW,scaleH);
g.drawRenderedImage(src, transAtZoom);
can any one plz suggest me the way ,how to increase the speed. of Zoom effect?
how to handle this problem?
thnxs..

Are you using NI Vision IMAQ AVI Read Frame or anther method to read the AVI file?
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison

How to Increase Your Home on Firefox?

How to Increase Your Home on Firefox?

Hello,
Sorry I don't understand the question. Could you explain what you are trying to do a bit more?
It may help if you a screenshot of the problem.
[[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

How to increase execution speed ??

Hi,
i want to know (if it is possible...) how to increase the speed execution of an application ??
Thanks in advance
Steve

Depends on what kind of application it is, where you want the speed increase, and whether you can pay for it with additional memory usage.
On general optimisations, there are two schools of thought.
The academic side says, write your application without doing any optimisations, and then optimise the bits that ou can show to be bottle necks. While this produces elegant code, the result can be very hard to optimise when you need to.
So I say; design with optimisation in the back of your mind. For example, if you need to access objects with great speed, then avoid interfaces if you can, because they will slow your code considerably, even if they do make it reuseable. Avoid massive creation of objects - for example string concatenation using + is very slow - use a stringbuffer instead if you have many to do.
For smaller increases in speed in algorithms and such, consider creating a local reference in a method to a class object, and using short in place of int in loops. Unroll as many loops as you can. Avoid making repeated reads to the same value in an array - hold it in a temporary variable instead.
For every optimisation you make, your program will get increasingly hard to read and maintain.
Do you have some more detail on what it is you want to speed up?

How to share internet from macbook pro to android phone?

how to share internet from macbook pro to android phone?

Sharing your Internet connection:
http://support.apple.com/kb/PH6589
http://www.maclife.com/article/howtos/how_wirelessly_share_internet_connection_m ac

How can I transfer photos from an android based phone to my iPad without going thru my PC?

How can I transfer pictures from my android based phone to my iPad without going through my PC?

I like to get my media shared in the cloud so its reachable across all my devices.
Dropbox, Box and Google Drive will be your friend.

How to increase internet access speed of OS X 10.5.8 whilst using telstra prepaid wirless broadband internet stick in Darwin, Australia

Is it possible to increase internet access speed of Mackbook Pro OS X 10.5.8 whilst using telstra prepaid wirless broadband internet stick in Darwin, Australia?
How can i do this?

Network Utility (in the Utilities folder) can tell you, in the Info pane, what speed you are actually connecting at.
Just set the interface to the one you are using (which may show up as en2 or something). Link Staus and speed are shown along with error counts.
If the data rate is very different from what you expected, you may have it manually set to a lower rate.
YouTube files are enormous -- that may be the best it can do.

Following instructions on how to increase the speed of my Internet.

I received a letter telling me how to upgrade my internet to a higher speed. The directions given in the letter say to unplug my modem from the outlet. There are four different wires coming out of my modem. Which one am I supposed to unplug and does it mean unplug from the power source in the wall or unplug from the back of my computer?

After receiving 2 or 3 letter for a year telling me that my modem was no longer supported and I needed to buy a new one, I recently received the very same letter telling me to unplu and re-plug my modem to double my internet speeds. Why? Is this some sort of a scam to track me or what? I mean, if my modem is no longer supported, then how can it can now suddently be twice as fast on the same 15 year old cable? BTW, I am paying $10 a month to rent the one I have now, so why wouln't they simply have offered to replace it for me as opposed to requested that I buy a new one? ODD!!! Comcast's management reminds me of a cross between the Teamsters and a New Jersey trash company.

How to increase download speed on osx mountain lion imac

My internet connection is 4mbps wired broadband.previously I downloaded at the speed of 300 to 415 kbps.now it reduced to 50 to 60 kbps.how to increase the download speed on my imac.

This isn't a function of your Mac; it's either your ISP or your router that is causing slow performance.
Make certain that you really are using a wired - only connection. Turn off AirPort to be sure.
Try resetting your router. If that doesn't fix things complain to your ISP. They will want you to connect a computer directly to your modem and run whatever speed testing software they use. Their responsibility ends with the equipment they provide.

Satellite A665 - How to increase WLAN speed?

Hi There
I have 2 notebooks at home. One is A300 (Windows Vista 32bit) and the newer one is A665 (Windows 7/64 bit). My wireless router is US Robotics USR 9108A compatible for the both systems.
A300's wireless internet speed is about 8Mbs but A665' s speed is about 0,7Mbs. How can I increase the speed of A665? What can cause this?
Any help will be appretiated.

Hi buddy,
I had a similar problem on my new Satellite A660 and the problem was power saving mode of WLAN card...
In Windows Power Management you can choose different power saving modes for WLAN card. You have to turn off power saving (=> High Performance) for WLAN card and then you will have the highest possible WLAN speed.
This article explains all functions about Power Saving:

How to increase the speed of producer-consumer architecture

Hey everyone -
This is a follow-up to a previous thread that I had posted (
http://forums.ni.com/t5/LabVIEW/How-to-use-a-dynamic-true-false-signal-with-a-case-structure/m-p/114...
), but my next question has taken a bit of a different direction so I have made a new thread.
Following tbob's suggestion, I am trying to use a producer-consumer architecture to start and stop data acquisition from a simulated NI 9237 device. I have attached the current version of our code to this post (Producer_Consumer_architecture.vi). Our main problem is that there is a significant lag between when elements get added to the queue using the Enqueue function, and when they are removed from the queue using the Dequeue function. As a result, the signals from our simulated DAQ channels run for much longer than they are supposed to, and the start-and-stop of data acquisition is not keeping in time with the simulated square wave signal (we would like our NI 9237 device to acquire data when the square wave has an amplitude over 3, and stop acquiring when the amplitude is under 3). If you allow the program to run for about 30 seconds, you will see what I mean (press the stop button twice to quit the program).
If anybody has any suggestions as to how we can increase the speed of the program, they would be very much appreciated!
Thanks in advance!
Attachments:
Producer_Consumer_architecture.vi ‏122 KB
Save_data.vi ‏14 KB

hello,
i don't have tools needed but , i see one thing is that you enqueue
every time you are greater 3 that means about every 2-3 ms so consumer is really sought
is it really what you want ?
may be you want to start on a treshold so you can use a treshold fonction
if i don't make mistake your square is 10 hz and the daq is configured 25000 sample 25000 hz
so you aquire 1s of signal every 100ms , there is something to correct
make tests and tell us
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

How to increase the speed of my producer loop?

Hi,
I try to monitor two CAN channels and to compare values online. That's why I use a producer loop to collect all CAN messages and a consumer loop to calculate some stuff. But the producer is to slow. The queues of my CANCard are full after some minutes. The queues are already set to maximum.
The first Channel runs with 500 kBit/s, the second one with 125 kBit/s.
Should I use two Producer loops or how can I increase the speed of my existing producer?
How should I handle the different speed of the channels?
Enclosed screenshots from my VI.
Thanks,
Thomas
Attachments:
producer.jpg ‏66 KB
receive.jpg ‏38 KB

Andy,
thanks for your support!
Goal of my project is to measure both CAN channels. Between these channels is a real electronic control unit (ecu) which is able to route CAN messages between the channels. My VI has to check weather the routing works fine or not.
Each message has an identifier and I kow which messages are routed. That means I have to measure both channels, look for routed messages and compare the data and the timestamp of the messages. I try that in my consumer loop. The data are stored in several 2d arrays. And I have to look for specific data in these arrays. I think the loops over the arrays are to slow. but I have no other chance - I have to buffer the messages somehow and then to compare by their timestamps to find the right order. But that's very difficult because the order of the messages in my producer queue is not ordered by the timestamp...
If you have any idea how to solve the problem better, let me know - I would be happy!
Thanks,
Thomas

Increase internet speed

What would increase my internet speeds? Currently I have low internet speeds from 9 to 12 mega bits per second with direct tv service.

You need to your provider this is a service your phone will support it.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Anyone use Ethernet with power line adapter to increase Internet speed ?

I have been using Wi-Fi for decades on all my connections and I have never used Ethernet because of the requirement to extend the wiring throughout the three levels of my house. I recently came across articles on power line adapters and thought this maybe the ideal way to increasing the speed not only on my 5K iMac on the bedroom level but also on my Mac mini used as a media centre down in the basement where I now intend to introduce Kodi et al to my Apple TV to increase my
my enjoyment of Cable TV, which I am finding is becoming less and less enjoyable from an entertaining POV.
I would appreciate hearing from others who have successfully chosen this route and who can express their views on the matter before I take the plunge.
Thank you.

My router is the Apple Airport Extreme which is 802.11ac. and the Bell modem (Sagemcom 2864) has been in use with Bell Fibe TV for the past 3 years. Bell replaced the Bell receivers in January when my contract expired and I threatened to opt out. They are Arris models and are really better, but they never replaced the Bell modem, which gives me a whole lot of trouble from time to time, but I intend to bring their 'technician' back to attempt to resolve that situation. Three years these days can result in improvements in electronic components that are surprising to say the least.
I'm really amazed to see the kind of speeds that 'Old Toad' reported, since my speed tests rarely exceed 17 Mbps Down and 7 Mbps UP, which explains why I am interested in seeking higher speeds. There is another local ISP that offers a choice of higher speeds, which Bell hasn't so far, so I may because of my predicament switch ISPs if there is no improvement available from Bell.
Thank you Allan Eckert, "Old Toad' and 'woodmeister' for your responses. I obviously need to find an ISP who can offer speeds double what I am having to endure now. One feature that is in Bell's favour is that the TV picture quality is actually superb, if only the Internet speed was on a par with that.
Regards

How to increase internet speed on firefox os based phone?

Similar Messages

Maybe you are looking for