How to Send Multiple Attachment by SOAP Adapter

Hi,
How to send multiple attachment by SOAP Adapter.
I am able to send single attachment but at the time of sending multiple attachment i am not able to see in SXMB_moni.
Regards,
Anurag

On the communication channel, please check the 'Do Not Use SOAP envelope' option. Also, please, add the "nosoap" attribute to the SOAP adapter caller. Check the note below for more information
#856597 FAQ: XI 3.0 / PI 7.0 / PI 7.1 SOAP Adapter
> "How does the nosoap mode work for the SOAP sender adapter?"

Similar Messages

How to send multiple attachements in single mail

Hi All,
Currently i am using this function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail with only one attachment.
But now i need to send multiple attachments to a single mail.
Can any one please tell me as how to send multiple attachments in single mail.
Thanks in advance.

Hi
See this and do accordingly
Mailing with Attachment by ABAP Coding
Refer this link:
Mail with attachment.
FORM send_list_to_basis .
DATA: w_path      LIKE rlgrap OCCURS 0 WITH HEADER LINE,
        lt_index    TYPE sy-tabix,
        doc_type(3) TYPE c,
        descr       LIKE it_objpack_basis-obj_descr,
        temp_data   LIKE w_path,
        temp1       TYPE string,
        tab_lines   TYPE i,
        langu(15)   TYPE c,
        expirydate TYPE so_obj_edt,
        L_FILE1(100).
CONCATENATE 'C:\' sy-repid '_' sy-datum '.XLS' INTO L_FILE1.
W_PATH-FILENAME = L_FILE1.
APPEND w_path.
CLEAR w_path.
wa_doc_chng-obj_descr = 'User List not logged on for 180 days'.
wa_doc_chng-obj_langu = 'E'.
wa_doc_chng-obj_expdat = sy-datum.
CLEAR w_subject.
CONCATENATE 'Please find attached document with list of users'
              'not logged on for 180 days for client' sy-mandt
              INTO w_subject SEPARATED BY space.
it_objtxt_basis-line = w_subject.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
it_objtxt_basis-line = text-004.
APPEND it_objtxt_basis.
CLEAR it_objtxt_basis.
CLEAR w_tab_line.
DESCRIBE TABLE it_objtxt_basis LINES w_tab_line.
READ TABLE it_objtxt_basis INDEX w_tab_line INTO l_cline.
wa_doc_chng-doc_size =
   ( w_tab_line - 1 ) * 255 + STRLEN( l_cline ).
CLEAR it_objpack_basis-transf_bin.
it_objpack_basis-head_start = 1.
it_objpack_basis-head_num   = 0.
it_objpack_basis-body_start = 1.
it_objpack_basis-body_num   = w_tab_line.
it_objpack_basis-doc_type   = 'RAW'.
APPEND it_objpack_basis.
CLEAR it_objpack_basis.
LOOP AT w_path.
    temp1 = w_path.
    descr = w_path.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '\'
        string    = descr
      IMPORTING
        head      = descr
        tail      = temp_data.
    CALL FUNCTION 'STRING_REVERSE'
      EXPORTING
        string = descr
        lang    = 'E'
      IMPORTING
        rstring = descr.
    CALL FUNCTION 'STRING_SPLIT'
      EXPORTING
        delimiter = '.'
        string    = descr
      IMPORTING
        head      = temp_data
        tail      = doc_type.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename      = temp1
        filetype      = 'BIN'
        header_length = 0
        read_by_line = 'X'
        replacement   = '#'
      TABLES
        data_tab      = it_upload.
    DESCRIBE TABLE it_upload LINES tab_lines.
    DESCRIBE TABLE it_objbin_basis LINES lt_index.
    lt_index = lt_index + 1.
    LOOP AT it_upload.
      wa_objbin_basis-line = it_upload-line.
      APPEND wa_objbin_basis TO it_objbin_basis.
      CLEAR wa_objbin_basis.
    ENDLOOP.
    it_objpack_basis-transf_bin = 'X'.
    it_objpack_basis-head_start = 0.
    it_objpack_basis-head_num   = 0.
    it_objpack_basis-body_start = lt_index.
    it_objpack_basis-body_num   = tab_lines.
    it_objpack_basis-doc_type   = doc_type.
    it_objpack_basis-obj_descr = descr.
    it_objpack_basis-doc_size   = tab_lines * 255.
    APPEND it_objpack_basis.
    CLEAR it_objpack_basis.
ENDLOOP.
it_reclist_basis-receiver = '[email protected]'.
it_reclist_basis-rec_type = 'U'.
APPEND it_reclist_basis.
CLEAR it_reclist_basis.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = wa_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_objpack_basis
      contents_txt               = it_objtxt_basis
      contents_bin               = it_objbin_basis
      receivers                  = it_reclist_basis
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
IF sy-subrc EQ 0.
    SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
ENDIF.
ENDFORM.                    " send_list_to_basis
<b>Reward points for useful Answers</b>
Regards
Anji

How to send multiple attachment s with a mail??

Hi,
How to send multiple attachments with a mail??
Situation::
In my case i have 5 internal tables populated dynamically in the report.
I want to send them in .TXT format as attachment with 1 mail.
Can anybody tell me in 'SO_NEW_DOCUMENT_ATT_SEND_API1',
how we add multiple attachmants to table objin???
thanks,
deepak

Hi Deepak,
Please find the sample code for sending mail with multiple attachment.
Report ZPAN_02M                                        *
REPORT zpan_02m                                .
*-MAIN DECLARATION----
DATA: docdata    LIKE sodocchgi1,
      objpack    LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
      objhead    LIKE solisti1   OCCURS 1 WITH HEADER LINE,
      objtxt     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objbin     LIKE solisti1   OCCURS 10 WITH HEADER LINE,
      objhex     LIKE solix      OCCURS 10 WITH HEADER LINE,
      reclist    LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
*-OTHER DECLARATIONS----
DATA : listobject   LIKE abaplist OCCURS 1 WITH HEADER LINE.
DATA : tab_lines(3) TYPE n.
DATA : att_type     LIKE soodk-objtp.
*OBJBIN = ' | '. APPEND OBJBIN.
*---For simple attachment -
DATA : BEGIN OF wi_data OCCURS 0,
         c1(10),
         c2(10),
       END OF wi_data.
wi_data-c1 = 'Line 1'.   wi_data-c2 = 'Line 1'. APPEND wi_data.
wi_data-c1 = 'Line 2'.   wi_data-c2 = 'Line 2'. APPEND wi_data.
wi_data-c1 = 'Line 3'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 4'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 5'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 6'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 7'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 8'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 9'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 10'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 11'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 12'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 13'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 14'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 15'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 16'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 17'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 18'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 19'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 20'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 21'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 22'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 23'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 24'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 25'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
wi_data-c1 = 'Line 26'.   wi_data-c2 = 'Line 3'. APPEND wi_data.
class cl_abap_char_utilities definition load.
constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF,
    con_nwln type c value cl_abap_char_utilities=>NEWLINE.
LOOP AT wi_data.
CONCATENATE wi_data-c1 con_tab
              wi_data-c2
            INTO objbin.
condense objbin.
CONCATENATE con_cret objbin INTO objbin.
APPEND objbin.
ENDLOOP.
*---CREATE MESSAGE : DOCDATA -
Name
docdata-obj_name = 'TEST_ALI'.
Subject
docdata-obj_descr = 'Test including ALI/HTML Attachment'.
*---CREATE MESSAGE : BODY -
objtxt = 'Test Document.'.
APPEND objtxt.
objtxt = 'You will find an ALI/HTML attachment in this message.'.
APPEND objtxt.
objtxt = 'Have a nice day.'.
APPEND objtxt.
*-CREATE PACKING LIST-----TEXT--
objpack-head_start = 1.
DESCRIBE TABLE objtxt LINES tab_lines.
READ     TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'RAW'.
APPEND objpack.
*-CREATE PACKING LIST-----ATTACHMENT--
att_type = 'XLS'.
DESCRIBE TABLE objbin LINES tab_lines.
READ     TABLE objbin INDEX tab_lines.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 1'.
objpack-obj_descr = 'Attached Document 1'.
APPEND objpack.
att_type = 'XLS'.
objpack-doc_size = ( ( tab_lines / 2 ) - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 14.
objpack-head_num   = 14.
objpack-body_start = 14.
objpack-body_num   = tab_lines / 2.
objpack-doc_type   = att_type.
objpack-obj_name   = 'ATTACHMENT 2'.
objpack-obj_descr = 'Attached Document 2'.
APPEND objpack.
*-CREATE RECEIVER LIST----
reclist-receiver = '[email protected]'. reclist-rec_type = 'U'.
APPEND reclist.
reclist-receiver = sy-uname.               reclist-rec_type = 'B'.
APPEND reclist.
*-SEND MESSAGE----
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data                     = docdata
    put_in_outbox                     = 'X'
    commit_work                       = 'X'
IMPORTING
SENT_TO_ALL                       =
NEW_OBJECT_ID                     =
TABLES
    packing_list                      = objpack
    object_header                     = objhead
    contents_bin                      = objbin
    contents_txt                      = objtxt
CONTENTS_HEX                      = objhex
OBJECT_PARA                       =
OBJECT_PARB                       =
    receivers                         = reclist
   EXCEPTIONS
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
     parameter_error                  = 5
     x_error                          = 6
     enqueue_error                    = 7
     OTHERS                           = 8.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
              WITH output = 'X'
              AND RETURN.
Hope this is enough for you...
Enjoy SAP.
Pankaj Singh.

How to send multiple attachment in single mail

i am using FM SO_NEW_DOCUMENT_ATT_SEND_API1 for sending mail.
pls guide me how can i modify my code so that i can send multiple attachments

Hi Manish,
Check out the links below.
E-mail multiple PDF attachments
Send a Single Mail with Multiple Attachment
Hope it helps.
Regards,
Amit
*Always reward points for helpful answers
Message was edited by:
Amit Kumar

Sending Multiple attachements (PDF) in a single email

Hello All,
I came across below link but could not understand.
How to send multiple attachements in single mail
Any idea how i can send email with Multiple attachements (PDF format files). Thanks.

Smart Form PDF Link
http://help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://sap.ionelburlacu.ro/sap0/sapsf001.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/16/a369b1800e4bdda978ee0fe3b7bd2c/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-img.com/smartforms/smart-001.htm
Rewards if useful................
Minal

How to send attachments using HTTP Binding Adapter?

How to send attachments using HTTP Binding Adapter in Jdeveloper?
Requirement: I need to send attachments to a system which can communicate with the middleware using https only.
Kindly suggest..
Edited by: Richa Juneja on Jan 28, 2013 4:03 AM

Hi,
Following links may help U
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
to know the basics about soap adapter u cn check out this link
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
to get in detail about the attachments chk out this link
hi i am unable to attach an attachment in File to mail scenario
Regards
Pullarao

Send a file usring SOAP adapter

Can I send a file using SOAP adapter on the sender side.
reg,

Henrique Pinto,
I am trying something out. The scenario I am trying would be a very small but imp part of a bigger business requirement.
I am trying out different options to show the clinet.
<b>1.Started XMLSPY and selected, SOAP>Create new SOAP request>
Now u r asked to browse for the wsdl....DONE. Clicked on OK
Now the request created as an xml file.
2.Go to SOAP> Send SOAP request > there is a new xml file which is the response.
I did not get any errors. I see a file in the target directory.
My problem is where it would really be picking up the data.
WSDL has only referrence to the definition of the message type
(in the definition of O/B interface )</b>
As you have already mentioned that in XI, message type should be refering to file message. If this is the case, how would I incorporate the data in that message.
I hope I am clear.
reg,
Message was edited by:
Naveen Chitluri

How to Send Multiple Plot XY Graph from LabVIEW to Microsoft Excel

The link below describes exactly what I would like to do, however the link to the solution/work around does not work.
Has anyone got an alternative solution?
http://digital.ni.com/public.nsf/allkb/CFD30D5E9C01AB5386256CFB0082AF3E

Please check the link again as it seems to be working fine now.
How to Send Multiple Plot XY Graphs from LabVIEW to Microsoft Excel:
http://digital.ni.com/public.nsf/allkb/CFD30D5E9C01AB5386256CFB0082AF3E
The standard Excel Insert Graph.vi cannot insert multiple XY Graphs to Microsoft Excel, so you will need to use the Report Generation Toolkit for Microsoft Office. You will find a link to an example program at the bottom of the page. I have also attached it below.
Attachments:
example.zip ‏35 KB

How to send multiple customer statements by email using RFKORD11 program.

Hi All,
How to send multiple customer statements by email using RFKORD11 program. Is it possible?
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
thanks in advance.
Regards,
Mahesh

Try execute the program in the background to see if that helps.

How to send multiple customer statements by email using RFKORD11

Hi All,
How to send multiple customer statements by email using RFKORD11 program.
As of now we copied the stanadard program and sending the customer statements by email, one by one.
if i execute the z program it will show the customer statement and send mail option.
if i click send mail it will send that customer statement to the corresponding customer.
then again i need to click back, it will show next customer statement and click on send mail.
Pl guide me, if any one worked on this program.
Regards,
Mahesh

Hi .
You first need to copy that program to Z and make the changes in it. Can you convert sapscript to smartform?
then you can write a logic to send mail in the loop.
to send the pdf file
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/mailsendthroughoutputcontrols
Regards,
Madhuri
Edited by: madhuri sonawane on Jun 10, 2009 4:20 PM

How to send an attachment thru mail in SAP?

Hi all,
I have an file which has been sent by the customer. The file type may vary each & every week (sometimes XLS, sometimes CSV & sometimes notepad). This file has to be sent to another person thru mail as an attachment.
Is it possible to send thru the fun mod 'SO_SEND_NEW_*'.
If so how to send as attachment. If not thru this fun mod, how to send?
Thanks,
Vijay.

I am enclosing the sample code to trigger an email, The logic for this is in comments, check this I am shure yuor problem will be solved.
*& Report ZGBL_SLA_PER
REPORT zgbl_sla_per NO STANDARD PAGE HEADING LINE-COUNT 26(3) MESSAGE-ID
zmsg2.
DECLARATION OF DB TABLES
TABLES: zncrfid, zrule_id.
DECLARATION OF INTERNAL TABLES
DATA: BEGIN OF ncrf OCCURS 0,
zncrf_id(15) TYPE c,
zncrf_l4_name(60) TYPE c,
z9gl_sla_flag(1) TYPE c,
zowners(30) TYPE c,
zowners_value(30) TYPE c,
zdate_changed(8) TYPE n,
ztime_changed(6) TYPE n,
END OF ncrf.
*DATA: NCRF LIKE ZNCRFID OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF it_ruleid OCCURS 0,
zrule_id(10) TYPE c,
zowners(30) TYPE c,
zowners_value(30) TYPE c,
END OF it_ruleid.
*data: wa like ncrf occurs 0 with header line.
DATA: BEGIN OF itab OCCURS 0,
zncrf_id(15) TYPE c,
zncrf_l4_name(60) TYPE c,
z9gl_sla_flag(1) TYPE c,
zowners(30) TYPE c,
zowners_value(30) TYPE c,
zdate_changed(8) TYPE n,
ztime_changed(6) TYPE n,
END OF itab.
data: file(10) type c,
dates type date.
EMAIL DECLARATION
*CONSTANTS: c_subject LIKE sodocchgi1-obj_descr VALUE 'Subject',
*c_tab TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*DATA: g_time TYPE char8,
*g_email(40) TYPE c,
*g_sent_all(1) TYPE c,
*g_doc_data LIKE sodocchgi1,
*g_error TYPE sy-subrc.
*DATA: i_message LIKE solisti1 OCCURS 0 WITH HEADER LINE,
*i_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
*i_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
*DATA: BEGIN OF mailid OCCURS 0,
zemail_id TYPE zrule_id-zemail_id,
END OF mailid.
*data: mailid like zrule_id occurs 0 with header line.
UPLOADING FLAT FILE TO INTERNAL TABLE NCRF
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'C:\VAMSY\file.txt'
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = ncrf[]
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF sy-subrc EQ 0.
Checking internal table ncrf is empty then
*delete records from TABLE ZNCRF_ID ******************************
IF ncrf[] IS INITIAL.
MESSAGE i003(ZMSG2).
ELSE.
DELETE FROM zncrfid.
ENDIF.
*****Values are read from rule table and checking owner and owner_value
*from zrule_id table and inserted into ZNCRFID **************
SELECT * FROM zrule_id INTO CORRESPONDING FIELDS OF TABLE it_ruleid
WHERE zrule_id IN ('OWNER1', 'OWNER2').
append IT_RULEID.
LOOP AT ncrf WHERE z9gl_sla_flag EQ 'Y'.
READ TABLE it_ruleid WITH KEY zowners = ncrf-zowners
zowners_value = ncrf-zowners_value.
IF ncrf-zowners = it_ruleid-zowners AND ncrf-zowners_value =
it_ruleid-zowners_value AND ncrf-z9gl_sla_flag ='Y'.
itab-zncrf_id = ncrf-zncrf_id.
itab-zncrf_l4_name = ncrf-zncrf_l4_name.
itab-z9gl_sla_flag = ncrf-z9gl_sla_flag.
itab-zdate_changed = sy-datum.
itab-ztime_changed = sy-uzeit.
itab-zowners = it_ruleid-zowners.
itab-zowners_value = it_ruleid-zowners_value.
APPEND itab.
ENDIF.
ENDLOOP.
modify database table zncrfid FROM ITAB
LOOP AT itab.
WRITE:/ itab-zncrf_id, itab-zncrf_l4_name, itab-z9gl_sla_flag,
itab-zowners, itab-zowners_value, itab-zdate_changed,
itab-ztime_changed.
zncrfid-zncrf_id = itab-zncrf_id.
zncrfid-zncrf_l4_name = itab-zncrf_l4_name.
zncrfid-z9gl_sla_flag = itab-z9gl_sla_flag.
zncrfid-zowners = itab-zowners.
zncrfid-zowners_value = itab-zowners_value.
zncrfid-zdate_changed = itab-zdate_changed.
zncrfid-ztime_changed = itab-ztime_changed.
INSERT INTO zncrfid VALUES zncrfid.
ENDLOOP.
ENDIF.
ENDIF.
*CALL FUNCTION 'DATE_TO_DAY'
EXPORTING
DATE = sy-datum
IMPORTING
WEEKDAY = file.
**CHECKING FOR THE FIRST MONDAY OF THE MONTH.
dates = sy-datum.
shift dates by 6 places left.
if file CO 'monday' and dates < 7 and dates >= 1.
else.
message e004(zmsg2).
endif.
EMAIL SEND TO OWNERS LIST
**Fill the mail body in i_message.
get email id's from database into internal table et_mailid
Fill the document data.
*g_doc_data-doc_size = 1.
Populate the subject/generic message attributes
*g_doc_data-obj_langu = sy-langu.
*g_doc_data-obj_name = 'SAPRPT'.
*g_doc_data-obj_descr = c_subject .
*g_doc_data-sensitivty = 'F'.
Describe the body of the message
Information about structure of data tables
*CLEAR i_packing_list.
*REFRESH i_packing_list.
*i_packing_list-transf_bin = space.
*i_packing_list-head_start = 1.
*i_packing_list-head_num = 0.
*i_packing_list-body_start = 1.
*DESCRIBE TABLE i_message LINES i_packing_list-body_num.
*i_packing_list-doc_type = 'RAW'.
*APPEND i_packing_list.
Add the recipients email address
*LOOP AT mailid.
*CLEAR i_receivers.
*i_receivers-receiver = mailid-zemail_id.
*i_receivers-rec_type = 'U'.
*i_receivers-com_type = 'INT'.
*i_receivers-notif_del = 'X'.
*i_receivers-notif_ndel = 'X'.
*APPEND i_receivers.
*ENDLOOP.
Call the FM to post the message to SAPMAIL
*CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
*EXPORTING
*document_data = g_doc_data
*put_in_outbox = 'X'
*commit_work = 'X'
*IMPORTING
*sent_to_all = g_sent_all
*TABLES
*packing_list = i_packing_list
*contents_txt = i_message
*receivers = i_receivers
*EXCEPTIONS
*too_many_receivers = 1
*document_not_sent = 2
*document_type_not_exist = 3
*operation_no_authorization = 4
*parameter_error = 5
*x_error = 6
*enqueue_error = 7
*OTHERS = 8.
Store function module return code
*g_error = sy-subrc.
Get i_receivers return code
*LOOP AT i_receivers.
*ENDLOOP.
**Instructs mail send program for SAPCONNECT to send email(rsconn01)
*WAIT UP TO 2 SECONDS.
*IF g_error EQ 0.
*SUBMIT zgbl_sla_per WITH mode = 'INT'
*WITH output = 'X'
*AND RETURN.
REWARD IF FOUND USEFULL,
Cheers,

How to send multiple material in our own message type

Dear All,
Any idea about how to send multiple material in our own message type,In my outbound i have created a message type but able to send only one material through program. If i give range of material its in error status 26 in WE02 and failed to send.
Help me ASAP.
Thanks & Regards,
Arun.

hi Gordon,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun
Edited by: Arun Kumaran on Aug 22, 2008 3:33 PM

How to send multiple records in file2file and file2db or all scenarios//

I'm able to send single record for file2file and file2db,
how to send multiple records in file2file and file2db or all scenarios//
what should add or make changes for dis.

1 put Occurance 1 to Unbounded in data type of IR
2 In the test tag of message mappings in IR,select one node and use "duplicate subtree" in its context menu
After that,you can download the test data in XML format with the button "save document source"
for example:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ZFileDemo xmlns:ns0="http://hand-china.com/mm/po_01">
- <Item>
<ItemNo>1</ItemNo>
<Matnr>2</Matnr>
<Text>3</Text>
</Item>
- <Item>
<ItemNo>4</ItemNo>
<Matnr>5</Matnr>
<Text>6</Text>
</Item>
</ns0:ZFileDemo>

How to send multiple attachemnt with a Email

Hello experts,
I have problem with sending multiple attachement with a Email .
I have used program BCS_EXAMPLE_5. it is not for multiple attachment.
Please help me.
Thank you.

Hello,
u can make use of these Function Modules.
SO_DOCUMENT_SEND_API1
SO_NEW_DOCUMENT_SEND_API1
'CONVERT_OTFSPOOLJOB_2_PDF'
the program which u gave using the method classes
Thank u,
santhosh
Edited by: santhosh kumar on Dec 2, 2008 2:15 PM

How to send an attachment with adobe form

Hi
in my application i have two process intiator and approval process both are adobe interactive forms,according to my scenarion i need to send an attachment(pdf or word document....)in intiatior to approval process,can pleasse tell me how to send the attachment.
Thanks
Raju
Edited by: raju on Oct 7, 2008 6:39 AM

hi!
chk these links .
Re: Sending Adobe Interactive Forms via Email
Re: Saving and sending Adobe Form pdf from WebDynpro
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/176882c3-0401-0010-9fbc-d9fa1f713a73
thanks
vishal

How to Send Multiple Attachment by SOAP Adapter

Similar Messages

Maybe you are looking for