How to increase PO column length in transaction VA05??
Hi Gurus,
The PO number in our sales order is of 28 characters..
However when we display list of sales orders using transaction code VA05 only first 20 characters are displayed...
Is there any settings required so that all the 28 characters are displayed in the report.
Please HELP!!!
Thanks,
Rehan
My Friend,
If you have put the 28 characters PO number in sales order header -- purchase order data tab then only you can see these 28 characters in VA05. Also, increase the column width for this PO number column in VA05 then you can see the 28 characters number. I think you have put less that 28 characters in the overview screen assuming that they are 28... right? this PO number field in overview screen in not of the same length as the mentioned above...
Hrishi
Similar Messages
-
HOW to increase code column length in se38
hi,
i am trying to copy paste code ( SE38) from one server to another but
it showing error while pasting i.e code column lenght . on previous server column length
was more than 125 charater per line. but here i am getting only 68 charater per line.
so how can i increase the length of charater per line.
please help me....
Manoj...hi,
follow this
REPORT zsample NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65
MESSAGE-ID yy.
~linganna -
How to increase the column size of Alv tbale
Hi All,
I created an Alv table to display the content of my database table. In one of the column the entire data from my database are not displayed the last few characters are missing. The data type for that column in the database is char. Can any one help me how to increase the column size in my Alv table or any suggestions to resolve this issue.Hi Vadiv,
Try with this..
DATA: LR_IF_CONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE,
LR_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE,
LR_CMDL TYPE REF TO CL_SALV_WD_CONFIG_TABLE,
LR_TABLE_SETTING TYPE REF TO IF_SALV_WD_TABLE_SETTINGS.
LR_CMP_USAGE = WD_THIS->WD_CPUSE_ALV( ).
IF LR_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
LR_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
" get reference to the ALV model
LR_IF_CONTROLLER = WD_THIS->WD_CPIFC_ALV( ).
LR_CMDL = LR_IF_CONTROLLER->GET_MODEL( ).
LR_TABLE_SETTING ?= LR_CMDL.
" Set column width
DATA LR_COL TYPE REF TO CL_SALV_WD_COLUMN.
LR_COL = LR_CMDL->IF_SALV_WD_COLUMN_SETTINGS~GET_COLUMN( 'PERNR' ).
LR_COL->SET_WIDTH( '70' ) .
LR_COL = LR_CMDL->IF_SALV_WD_COLUMN_SETTINGS~GET_COLUMN( 'ENAME' ).
LR_COL->SET_WIDTH( '100' ) .
LR_TABLE_SETTING->SET_FIXED_TABLE_LAYOUT( ABAP_TRUE ).
You can refer to webdynpro component SALV_WD_TEST_TABLE_PROPS. Go to the view TABLE and look inside the method SET_COLUMN_SETTINGS. I hope this will help you.
Cheers,
Kris. -
How you increase the strength / length of an airport extreme?
How you increase the strength / length of an airport extreme? I find it hard to use wireless internet
Please checkout the following Apple Support article on details on the many ways you can extend the wireless range of your current AirPort base station.
-
How can we restrict Column length in ALV using POWL.
Hello,
I have a new assignment o ABAP Web Dynpro, data displaying ALV by using POWL is a part of that assignment. Everything went fine and at last moment I was stuck with a small issue. In my application I am displaying first ALV by using POWL concept and on the basis of selected row I am displaying second level LAV by using normal ALV procedure (SALV_WD_TABLE). Here the issue is as soon as second ALV is displaying columns in first level ALV are getting expanded. How can I restrict Column length in first level ALV using POWL. I browsed a lot for getting the solution for this, Can any one help me out from this issue.
Regards,
KumarDone, in field catalog method...
-
How to increase 255 column limit in hyperion financial reporting studio
how to increase 255 column limit in hyperion financial reporting studio
Check this knowledge article :
Best Practices for Hyperion Financial Reporting (FR) Report Design [ID 1196695.1] -
Increase the column lengths of excel sheet through abap
I developed a abap program and it was displayed the output.
So i need to display this out put in excel sheet.
for that I read the out put and placed in the excel,
the only problem is the column lengths are small
after download i am dragging the each column,
But i need to increase the each column by the program
How can I ?
I am using the following code
lastline = new_line_c + 13.
DO .
READ LINE sy-index LINE VALUE INTO it_read-excel.
APPEND it_read.
IF sy-index > lastline.
EXIT.
ENDIF.
ENDDO.
lastline = new_line_c - 38.
colm = ( length - 37 ) / 18.
colm = colm + 4.
FOR THE EXCEL CONVERTION
INCLUDE ole2incl.
DATA: w_cell1 TYPE ole2_object,
w_cell2 TYPE ole2_object.
*--- Ole data Declarations
DATA: h_excel TYPE ole2_object, " Excel object
h_mapl TYPE ole2_object, " list of workbooks
h_map TYPE ole2_object, " workbook
h_zl TYPE ole2_object, " cell
h_f TYPE ole2_object, " font
gs_interior TYPE ole2_object, " Pattern
worksheet TYPE ole2_object,
h_cell TYPE ole2_object,
h_merge TYPE ole2_object,
h_cell1 TYPE ole2_object,
range TYPE ole2_object,
h_sheet2 TYPE ole2_object,
h_sheet3 TYPE ole2_object,
gs_font TYPE ole2_object,
flg_stop(1) TYPE c.
*DATA: t_excel_bckord LIKE t_excel OCCURS 0 WITH HEADER LINE,
*t_excel_bcklog LIKE t_excel OCCURS 0 WITH HEADER LINE,
*t_excel_blkord LIKE t_excel OCCURS 0 WITH HEADER LINE.
TYPES: data1(1500) TYPE c,
ty TYPE TABLE OF data1.
DATA: it TYPE ty WITH HEADER LINE,
it_2 TYPE ty WITH HEADER LINE,
it_3 TYPE ty WITH HEADER LINE,
rec TYPE sy-tfill,
deli(1) TYPE c,
l_amt(18) TYPE c.
DATA: BEGIN OF hex,
tab TYPE x,
END OF hex.
FIELD-SYMBOLS: <fs> .
CONSTANTS cns_09(2) TYPE n VALUE 09.
ASSIGN deli TO <fs> TYPE 'X'.
hex-tab = cns_09.
<fs> = hex-tab.
DATA gv_sheet_name(20) TYPE c .
M A C R O Declaration
DEFINE ole_check_error.
if &1 ne 0.
message e001(zz) with &1.
exit.
endif.
END-OF-DEFINITION.
DATA: xy TYPE i,
xz TYPE i,
yz TYPE i,
ab TYPE i,
pterm TYPE i.
IF h_excel-header = space OR h_excel-handle = -1.
start Excel
CREATE OBJECT h_excel 'EXCEL.APPLICATION'.
ENDIF.
PERFORM err_hdl.
*--- get list of workbooks, initially empty
CALL METHOD OF h_excel 'Workbooks' = h_mapl.
PERFORM err_hdl.
SET PROPERTY OF h_excel 'Visible' = 1.
add a new workbook
CALL METHOD OF h_mapl 'Add' = h_map.
PERFORM err_hdl.
*GV_SHEET_NAME = '1st SHEET'.
gv_sheet_name = 'Price Comparison List'.
GET PROPERTY OF h_excel 'ACTIVESHEET' = worksheet.
SET PROPERTY OF worksheet 'Name' = gv_sheet_name .
index1 = 3.
LOOP AT it_read.
heading
IF sy-tabix < 4.
it_item = it_read.
IF it_item CS '-----'.
CLEAR it_item.
APPEND it_item.
ELSE.
IF sy-tabix = 1.
it_item+0(1) = deli.
ENDIF.
APPEND it_item.
ENDIF.
ENDIF.
headear data and item
IF sy-tabix > 4 AND sy-tabix < descline1.
it_item = it_read.
IF it_item CS '----'.
ELSE.
REPLACE ALL OCCURRENCES OF sy-vline IN it_item WITH deli.
APPEND it_item.
ENDIF.
ENDIF.
xy = 2.
xz = 38.
discount etc
IF sy-tabix >= descline1 AND sy-tabix < descline.
it_item = it_read.
it_item+12(1) = deli.
it_item+22(1) = deli.
it_item+43(1) = deli.
WHILE xy < colm.
xz = xz + 18.
it_item+xz(1) = deli.
xy = xy + 1.
ENDWHILE.
APPEND it_item.
ENDIF.
payment terms
xy = 2.
xz = 37.
pterm = descline + 6.
IF sy-tabix > descline AND sy-tabix < pterm.
it_item = it_read.
IF it_item CS '-----'.
CLEAR it_item.
APPEND it_item.
ELSE.
it_item+12(1) = deli.
it_item+15(1) = deli.
it_item+36(1) = deli.
WHILE xy < colm.
xz = xz + 17.
it_item+xz(1) = deli.
xy = xy + 1.
ENDWHILE.
APPEND it_item.
ENDIF.
ENDIF.
prepared by
lastline = pterm + 3.
IF sy-tabix >= pterm AND sy-tabix <= lastline.
it_item = it_read.
IF it_item CS '-----'.
ELSE.
it_item+0(1) = deli.
it_item+54(1) = ' '.
it_item+16(1) = deli.
APPEND it_item.
ENDIF.
ENDIF.
remaarks
yz = lastline + 10.
IF sy-tabix > lastline AND sy-tabix <= yz.
it_item = it_read.
it_item+0(1) = deli.
it_item+54(1) = ' '.
APPEND it_item.
ENDIF.
approved by
ab = yz + 5.
IF sy-tabix > yz AND sy-tabix < ab.
it_item = it_read.
IF it_item CS '-----'.
ELSE.
it_item+0(1) = deli.
it_item+54(1) = ' '.
it_item+14(1) = deli.
APPEND it_item.
ENDIF.
ENDIF.
ENDLOOP.
*--Formatting the area of additional data 1 and doing the BOLD
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 1
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
*Bold for the second row
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 2
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
*Bold for the fourth row
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 4
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
*Bold for the fifth row
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 5
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
*Bold for the sixth row
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 6
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = colm.
CALL METHOD OF h_excel 'Range' = h_cell
EXPORTING
#1 = w_cell1
#2 = w_cell2.
*CALL METHOD OF gs_cells 'Select' .
GET PROPERTY OF h_cell 'Font' = gs_font .
SET PROPERTY OF gs_font 'Bold' = 1 .
DATA l_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>clipboard_export
IMPORTING
data = it_item[]
CHANGING
rc = l_rc
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
OTHERS = 4.
CALL METHOD OF h_excel 'Cells' = w_cell1
EXPORTING
#1 = 1
#2 = 1.
CALL METHOD OF h_excel 'Cells' = w_cell2
EXPORTING
#1 = 1
#2 = 1.
PERFORM err_hdl.
CALL METHOD OF h_excel 'Range' = range
EXPORTING
#1 = w_cell1
#2 = w_cell2.
CALL METHOD OF range 'Select'.
PERFORM err_hdl.
CALL METHOD OF worksheet 'Paste'.
PERFORM err_hdl.
CALL METHOD OF h_excel 'QUIT'.
FREE OBJECT h_zl.
FREE OBJECT h_mapl.
FREE OBJECT h_map.
FREE OBJECT h_excel.Hello Ravi,
Thank you very much for your suggestions.. but still have some more doubts:
What i want to do is :
-->call report in background job with a selection criteria.
-->the output of the report should be trasnsfered to excel sheet
-->then the excel sheet should be sent to XI..
My doubts are:
-> is it possible with every report or we need some extra code to achieve this
-> If yes, then how exactly it should be done. can you please explain in more detail.
Thank you very much for your help.
Best Regards,
Jasmeet -
How to increase the size (Length and width) of check box
Hi All,
I have to increase the size of ( width and length) of check box, I have revised to check box topic in dev guide but didnt find any clue, i have also tried to use CCStyle class but that is also not working, I would appreciate if some can help me out on this. Thanks in advance , let me know if any clarification required.
Thanks
PratapHi Pratap ,
I honestly don't know how to increase the size
But i am giving you an alternate solution : we can create two Images with check box type 1 ) with checked
2 ) with unchecked . ( you can create image of any size ) and get them displayed on OAF screen dynamically using switcher case .
Dynamically displaying image will give the illusion of check box being checked and unchecked .
keep this image moved to following media directory
eg : /oraapp/mfgtestcomn/java/oracle/apps/media .
Implement the switcher case , add the fire action to this Image Column , create a transient attribute and attach to this
column . Depending on the value returned by transient attribute display the image on the column .
Let me know if its not clear .
Keerthi -
How to decrease the column length in working time (CATS) table
Hi all,
Can you please tell me how we can decrease the column length in CATS table in the portal. Is it something we can do in webdynpro or in the back end.
Thanks in advance.
RK ReddyI was looking for something similar and ran across OSS Note 989453. I would recommend checking out this note to see if it helps. Apparently, there is a JAVA program error that makes the columns wider than they need to be.
We have not yet tried this so if you happen to use it, let me know how it works for you.
Mark Musser
County of Sacramento -
How to increase Article description length
Hi Experts,
How to increase article description 40 to 60 characters.
Thanks,
Abbas.Hi Abbas,
It is not possible to have more than 40 character for article description. SAP doesn't allow you to have more than 40 character in article description field.
As per SAP standard the maximum length of an article is 18 char and for the description 40 char.
BR
Ajaya Kr Mishra -
How to increase a column width in numbers
Hello,
Is there a way to increase the column width of a numbers table by using a short cut.
In a few words is there any shortcut to increase or decrease the size of cells and columns?
Something like command+?
Regards,
Jonathan M.No key commands are available. You can select the table then use the "Table Formatter":
These controls will apply to the items selected. If you have one column highlighted then you can change the width of that one column. If you select all columns then this control will apply to the selected columns.
you can also hover the cursor over the dividers between columns (the lines in the header... the lines between, for instance, the "A" and the "B"). The cursor will change to a vertical bar with a horizontal line with left right arrows, then click and drag as needed. Similar for rows. -
How to populate the column "Network" in Transaction FAGLL03
Hello Friends,
I need to populate the column "Network" in Transaction FAGLL03. I have followed the SAP note 984305 - "Line item: Definition of special fields (T021S)" to display the column "Network". But the problem is field Network (BSEG-NPLNR) is empty for all line items and hence it is coming blank in Transaction FAGLL03. The value of Network is maintained in table AUFK.
I have executed program BALVBUFDEL and RFPOSXEXTEND.
But the column "Network" is still coming empty.
Thank you
JeetHi Jeetendar,
I think at the time of posting you have not provided the network field or it might be suppressed. Due to this the line items are showing blank.
Regards,
Mukthar -
How to increase the column size of interactive report
Hi , I am using apex 4.2 and theme 25 ..
i did not find any option to increase the column size of interactive report. where as in classic report i can do so ,,
Please guide me to achieve that.
Thank You,
Nihar NarlaNihar Narla wrote:
Hi , I am using apex 4.2 and theme 25 ..
i did not find any option to increase the column size of interactive report. where as in classic report i can do soThis can be done using CSS. Create a rule like this in the page Inline CSS property:
.apexir_WORKSHEET_DATA td[headers="COLUMN_ALIAS"] {
width: 10em;
}where COLUMN_ALIAS is the alias of the column in the report query and the width measure is whatever you require. -
How to increase the default length of an attribute of a BO
Hi All,
I have created a BO.It is having one attribute called title of type String with default length 30.I deployed it and it is working fine.
Now i want to increase its default length to 256.I opened the table generated for this BO and increased its length.But, when i regenerating the code its length is again getting reset to the default length 30.I tried it through Dictionary perspective also.
Any Suggestions.
Regards
SampathHi All,
I resolved my problem. Just we have to change the data type to xLongText.
Sampath -
How to increase the Field length
Hi All ,
I have to increase the Standard Field length in a transaction.
is that possible ? if yes , how we can do that ?
thanks and regards,
Deepak Rana.it is not advisable to change the format of standard SAP table fields. most of them are being used in many different places, you will have a hard time making sure that all functionality still works OK after such a change.
maybe you can append new fields to ADRC and work with these.
Greetings
Thomas
Maybe you are looking for
-
I have a message box on my iPad screen that says, "iCloud Backup" This iPad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi. I cannot touch the 'OK' button to make the message go away... i
-
Why don't PDF attachments not visible in mail.
Mail is not displaying PDF's that are attached in the body of the email. We have been dragging and dropping pdf and jpeg images into emails for years. The images are visible in the anders email but not to the receiver. What changed? Why are they n
-
Network Attached Storage HD Question
I have a couple of Buffalo Terrastations and I want to take the one with 4 x 500Mb drives in a RAID 5 and replace them with 2Tb drives. Since I'm accessing this NAS over my network, would I be okay sticking in 5400 drives or should I go with 7200? Wi
-
OVD plugin returning "Virtual" entry when entry not yet available in OID
Hi, We've been working on a solution in which a new user has to get immediate access to a website and we, because the provisioning is taking some time, we have implemented a plugin for OVD which basically looks in the OID and if the user exists in OI
-
[b]How Can I Browse The Files of the Phone[/b]
Hi guys, I want to know if there is a way to browse the files of the phone from a program using J2ME like what happen when we select FILE >> OPEN in MS Word. If there is I hope from you to give any idea about it or a sample or a refrenece. Thank you