How to inline message/rfc822 attachments?

Howdy,
In Tiger, attachments with a MIME type of "message/rfc822" were shown inline.
In leopard they are not.
Now they show up as an attachment with an envelope icon and a filename of "somefilename.eml" where "somefilename" appears to be based off the subject, but is likely set by the sender's mail client.
How do I get the Tiger behavior back?
Thanks,
Jeff.

This is not unusual. An attached message need not have a filename,
especially if it wasn't stored in a file but rather was just attached to the
new message from within the mailer that composed the new message.
Some mailers will set a filename anyway, but there's no requirement
that they do that.

Similar Messages

How to get message/rfc822 attachment name by using JavaMail

Hi,
I am fetching incoming mail which has message/rfc822 attachment. i.e: ".msg" (mime message) is attached to this incoming mail. When I try to get name of this message/rfc822 attachment, I am getting null. Body part for this message attachment doesn't contain attachment name? Is this known issue? Is there any solution for this? How to get attached message name?
I am using javax.mail.part.getFileName() for getting bodypart's filename.
Thanks,
Shilpa

This is not unusual. An attached message need not have a filename,
especially if it wasn't stored in a file but rather was just attached to the
new message from within the mailer that composed the new message.
Some mailers will set a filename anyway, but there's no requirement
that they do that.

Hoe to read attachments of type MESSAGE/RFC822

hi,
How to read attachments in mails of type MESSAGE/RFC822
this occurs when somebody puts "Forwarded mails" directly as an attachment inside the mail body itself..
guyz ur help for this will be very much helpful..
thanks
sriram.B

Hi,
I am also struggling the same problem. When I am reading part of type message/rfc822 I am not able to get right content.
Waiting for some reply.
Subhash

In mail, my attachments, both photos and documents appear in the body of the message. How can I get my attachments to appear as a separate attachment and not as part of the message. Thanks for your help, Karen.

In mail, my attachments, both photos and documents, appear in the body of the message. How can I get my attachments to appear as a separate attachment and not as part of the main message???? Thanks for your help, Karen.

softwater wrote:
...and costs $14.99
Yep! And if you absolutely need (or think you need) that functionality, it is worth every penny.
As Don already pointed out, exactly what the recipient sees will depend on how they've set up their machine and what unnecessary 3rd party apps they might've installed to display attachments the way they want.
In theory, that is true. In practice, Attachment Tamer will cause more of your messages to show up as plain-jane icons on the other end. The problem is, after all, people running Outlook 2003 and 2007. These people likely aren't doing many system modifications.
If I were you, I'd use the free solutions provided above, save my money and let my recipients decide how they will handle their mail.
I completely agree.

How to convert javascript alert message into an Inline message in Apex Page

Hi All. Im new to Apex.
Present Approach -
I have a dynamic report region developed using API's like APEX_ITEM etc. I am using java scripts to validate these dynamic items and popup alert messages as shown below -
function ValidateNotObservedCB(p_row_num)
var v_row_num = p_row_num;
var v_not_observed_cb_status = document.getElementById('f_notobserved_'+v_row_num).checked;
var v_not_in_district_cb_status = document.getElementById('f_notindistrict_'+v_row_num).checked;
var v_program_code = document.getElementById("f_program_code_"+v_row_num).value;
if ( (v_program_code.length>0)&& ( document.getElementById('f_notobserved_'+v_row_num).checked==true ))
     bold alert("You have already entered a program code.") bold
     document.getElementById('f_notobserved_'+v_row_num).checked=false ;
     document.getElementById('f_notobserved_'+v_row_num).value='N';
} else if ( (v_program_code.length==0)&& ( document.getElementById('f_notobserved_'+v_row_num).checked==true )) {
     document.getElementById('f_notobserved_'+v_row_num).value='Y';
     document.getElementById('f_notobserved_'+v_row_num).checked=true ;
} else
     document.getElementById('f_notobserved_'+v_row_num).checked=false ;
     document.getElementById('f_notindistrict_'+v_row_num).checked=false;
     document.getElementById('f_notindistrict_'+v_row_num).value='N';
     document.getElementById('f_notobserved_'+v_row_num).value='N';
Question/Issue - How can I convert these alert messages into Inline messages to show on the page, similar to what appears when we do Item Validations in APEX.
Waiting for responses as this is an urgent requirement.
Thanks in Advance,
Madhu

Hi,
I did with jQuery small sample
http://apex.oracle.com/pls/otn/f?p=40323:36
Page HTML header is
<script type="text/javascript">
$(function(){
var lImg = $('<img alt="" class="pb" style="float: right;" src="/i/delete.gif"/>');
var lMesg = $('<div id="MESSAGE" style="border-top: 1px solid rgb(142, 170, 142); border-bottom: 1px solid rgb(142, 170, 142); padding: 5px; background: rgb(235, 241, 235) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous; width: 450px;" class="t14notification"></div>');
$('.pb').live('click',function(){
    $x_Remove("MESSAGE");
$('#SUBMIT').click(function(){
    if($('#MESSAGE').length == 0){
      $('#t14Messages').children().append($(lMesg));
       $(lMesg).append($(lImg));
       $(lImg).after($('#P36_NOTIFICATION').val());
    }else{
       $('#MESSAGE').text('');
       $('#MESSAGE').append($(lImg));
       $(lImg).after($('#P36_NOTIFICATION').val());
</script>I do not know does it help. Using this depend much on theme, defined class and IDs.
Br, Jari

How to send a SOAP message with attachments

How to send a SOAP message with attachments thru webservice using axis-1_3 can any one sujjest.............................

Please refer
http://www.javaworld.com/javaworld/jw-09-2003/jw-0912-webservices.html
http://xml.sys-con.com/read/40315.htm

How to save inline images and attachments separatley?

Hi,
I want to save all inline images into a certain directory and all attachments into another directory.
I use the following code to do this:
Multipart multipart = (Multipart) message.getContent();
        for (int x = 0; x < multipart.getCount(); x++) {
            BodyPart bodyPart = multipart.getBodyPart(x);
            String disposition = bodyPart.getDisposition();
            if(disposition != null){
                 log.debug("Disposition: " + disposition);
                 if (disposition.equals(BodyPart.ATTACHMENT)) {
                      log.debug("Mail has attachment: ");
                     DataHandler handler = bodyPart.getDataHandler();
                     log.debug("FILENAME: " + handler.getName());
                     saveAttachment(session, bodyPart, emailData);
                 else if(disposition.equals(BodyPart.INLINE)){
                      log.debug("Mail has inline attachment: ");
                     DataHandler handler = bodyPart.getDataHandler();
                     log.debug("Inline FILENAME: " + handler.getName());
                     saveInlineAttachment(session, bodyPart, emailData);
            else {
                 log.debug(bodyPart.getContent());
        }This approach works when the email has inline images only or attachments only.
It does not work when the email has both inline images and attachments. (Only the attachments are saved).
Come someone please help me correct my solution so that it can process an email that has both inline images and attachments and save them in different directories.
Thank you

Thanks bshannon.
It took me a while to understand what you meant but I think I finally got it.
I modified the getText method in order to save the embedded images:
private Image getImages(Part p, EmailData emailData, String ext) throws MessagingException, IOException {
         if (p.isMimeType("image/*")) {
            InputStream is = p.getInputStream();
            BufferedImage im = ImageIO.read(is);
            String fileName = "attachments/inline/body " + inlineImageNumber++ + "." + ext;
            File imageFile = new File(fileName);
            ImageIO.write(im,ext,imageFile);
            is.close();
            emailData.getInlineAttachments().add(fileName);
            return null;
        if (p.isMimeType("multipart/related")) {
            Multipart mp = (Multipart)p.getContent();
            Image image = null;
            for (int i = 0; i < mp.getCount(); i++) {
                Part bp = mp.getBodyPart(i);
                if (bp.isMimeType("image/jpeg")) {
                    if (image == null){
                        image = getImages(bp, emailData, "jpg");
                    continue;
                else if (bp.isMimeType("image/gif")) {
                    if (image == null){
                        image = getImages(bp, emailData, "gif");
                    continue;
                else if (bp.isMimeType("image/bmp")) {
                    if (image == null){
                        image = getImages(bp, emailData, "bmp");
                    continue;
                else if (bp.isMimeType("image/png")) {
                    if (image == null){
                        image = getImages(bp, emailData, "png");
                    continue;
            return image;
        else if (p.isMimeType("multipart/*")) {
            Multipart mp = (Multipart)p.getContent();
            for (int i = 0; i < mp.getCount(); i++) {
                Image image = getImages(mp.getBodyPart(i), emailData, "");
                if (image != null){
                    return image;
        return null;
    }

How to Change Messages inline attribute value Dinamically

Hi
I'm using Jdev 11.3
Our requirement is if the facesmesage having onlly one message it should come like inline message
else it should come as a popup.
i tried EL for inline attribute but the problem is the method is calling only when submition
public boolean isInline()
boolean flag = true;
Iterator it = FacesContext.getCurrentInstance().getMessages();
if (it.hasNext())
flag = false;
return flag;
regards Abhilash

duplicate

Mail message with attachments

I use iMacs for work. I often send email messages with attachments using Mail. Often, when sending email messages to Windows users (they are out there still), they will reply that they cannot open "the second attachment." The message seems to "pick up" a second apparent attachment, which is generally just a few K in size, and is not part of the original message or attachment. Unfortunately, though, it tricks the recipient into thinking that there are two attachments and the second one is meaningful So then they respond and I have to assure them that the second attachment is irrelevant and can be ignored.
Any thoughts on how to fix this, so outgoing email messages will only present the intended attachment?

That's a great question. I do use a signature, but inasmuch as it is simply text pre-inserted in the email message, I would be surprised if the signature somehow became stripped out and converted to an attachment. Nonetheless, I will try deleting the signature to see if that makes any difference.

Where does Messages store attachments on the iPad?

Where does Messages store attachments on the iPad?
some photos are quite large, so it would be good to know where they go, and how to manage the app.... ;)

Managing memory usage is not possible because the user does not have access to the file structure (unless you have jail broken your iPad that is).

Message/rfc822 error in mail

When retrieving older emails from my exchange server I get a format error - message/rfc822 - unable to read format, please re-send.
How can I stop this happening?

iCloud email has a 20MB size limit, that's all that can be sent.
The total number of messages you can send each day (200 messages)
The number of recipients to whom you can send each day (1000 recipients)
The maximum number of recipients per message (100 recipients)
The size of incoming and outgoing messages (20 MB)

Inline Message with non english language....

we can see the properties file in the properties file like
javax.faces.component.UIInput.REQUIRED=error:{0}.
so it will show the message like "textfield1 " value is required.
but i want it shows "mytext"<--japanese value is required..
it looks like that the error message's {0} is read the components id.
so i need to change the code like setボタン() or getボタン()..
its really a bad solution........
may i let the inlin message get the component's title for the textforamt's {0} ?
thanks
and
best regards
koji

You -can- change the builtin required-validator message, and there's a tutorial written on that that I think will be posted shortly; but you are basically providing a new bundle value for the builtin required-validator's key, so you don't have the chance to supply additional parameters to the message. So if you want to insert the title property or any other property or computed string, you need to do your own validator.
P.S. It's not hard. At JavaOne I showed how to do one during James Gosling's keynote demo; the Creator demo was just 5 minutes or so and in that time I wrote a simple credit card number validator, deployed it and verified the results in the browser. You can see the keynote here:
http://www.sun.com/aboutsun/media/video/javaone/gosling.html
-- Tor
http://blogs.sun.com/tor

How to transfer Messages history from Mavericks to Yosemite clean install

I would like to do a clean install of Yosemite on my MacBook, but retain all of my Messages history and attachments from my current Mavericks install. Is this possible? What files do I need to copy from the Mavericks install (before I wipe the HD) and where do I need to put them after I install Yosemite (cleanly)? Anything else I need to do after copying them?
Thanks!

I managed to finally get mine to work, but not after a bit of trouble and losing new messages since my time machine back up (about a days worth since my backup replaced my current. I backed up and upgraded last night, and I figured out how to restore messages this morning, so anything in between that I got on my phone was lost. no big deal).
Much of the below is from other discussions, so I don't want to take credit for it, but wanted to make it easy for you, and there was one small change.
First make sure you can see hidden files by opening terminal and inputting: defaults write com.apple.finder AppleShowAllFiles YES
QUIT YOUR MESSAGES APP
Replace the following files from your backup to your current clean install. Pretty much all the files should be in the same spot, except for one folder that I'll explain further below.
Same File path
/users/<name>/Library/Messages-------> /users/<name>/Library/Messages/ this folder should include 4 files:
chat.db
chat.db-shm
chat.db-wal
the folder "Attachments"
/users/<name>/Library/Preferences----> /users/<name>/Library/Preferencescopy any file that includes iChat or Messages in the .plist
Different File pathI am not sure if this matters, but it's something I noticed when I got a message in my clean install before trying to restore my history. In Yosemite, I noticed that that "Attachments" and "Archive" folder are both in /users/<name>/Library/Messages, whereas in Mavericks, the "Attachments" folder is in that file path, but the "Archive" folder is located in /users/<name>Library/Containers/com.apple.iChat/Data/Library/iMessages/Archive, and within this same folder there is a shortcut to the Attachments folder. (I'm not sure if this matters, but this worked for me). I hope I didn't confuse you there!
/users/<name>/Library/Containers/com.apple.iChat/Data/Library/Messages/Archive-------> /users/<name>/Library/Messages/
Restart your computer
Open Messages and it will rebuild your database.
Ta da!

How to deal with SOAP attachments?

Is there any information available on how to work with SOAP attachments? I am looking
for a feature similar to what is available in other products where you can take a
byte[] and map to image/jpg, application/octet-stream, etc... and have the tool create
the appropriate message formats. How would I do this using WL Workshop? I could
not find anything in the docs... is this supported?
Thanks,
Bob

Easiest thing is to encode the contents of the binary object in the XML
message as you suggest.
I'd like to hear more about what you are trying to do as well -- we're
planning on adding support for attachments in the next release, and I'd like
to make sure we do it in a way that meets your needs.
-C
"Bob Hayden" <[email protected]> wrote in message
news:[email protected]...
>
I am evaluating the capability of returning and consuming image/fileattachments through
a web service. This is one of our high priority integration requirementsand must
be available somehow through the framework we choose. Other productshave ways
to do this through an IDE... if WorkShop is not going to directly supportthis then
does anyone have any suggestions or examples on how this can be done in away that
is still intuitive for a WorkShop user (in other words without rolling upyour sleeves
and digging into JAX-RPC)? I suppose one could base64 it and add it tothe WorkShop-generated
message as a String using the return XML map, but I would prefer toinvestigate a
more standards-based approach.
Is it just me or does the lack of support for SOAP attachments seem to bea serious
missing piece from WL Workshop?
-Bob
"Raj Alagumalai" <[email protected]> wrote:
Bob,
WebLogic Workshop does not currently support SOAP attachments. However,
please note
that if you are developing your Web services using the APIs and services
provided
by J2EE and WebLogic Server directly, WebLogic Server does support SOAP
attachments.
Please refer to the following document for more Workshop FAQ's
http://dev2dev.bea.com/resourcelibrary/faqdetail.jsp?productType=weblogic+w
orkshop&highlight=faq
>>
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Bob Hayden" <[email protected]> wrote:
Is there any information available on how to work with SOAP attachments?
I am looking
for a feature similar to what is available in other products where youcan
take a
byte[] and map to image/jpg, application/octet-stream, etc... and havethe
tool create
the appropriate message formats. How would I do this using WL Workshop?
I could
not find anything in the docs... is this supported?
Thanks,
Bob

Content-Type: message/rfc822?

So Mail on the iphone doesn't appear to be able to display inline the following content type
Content-Type: message/rfc822
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
Does anybody else know a way Mail can display the message as an attachment "inline?"

Robert,
I have received messages forwarded from Thunderbird and had them show up.
There must be some difference. When you are constructing the message yourself, are you following all the guidelines in RFC 1049, 1341, and 1521-1524? I think there might be other involved. Essentially as I understand it, and its been a while since I read the RFC's in full, that the message/rfc822 was to indicate an attachment, or portion that complied with the older rfc822 for backwards compatibility.
Hope this helps,
Nathan C.

How to inline message/rfc822 attachments?

Similar Messages

Maybe you are looking for