How to install and configure a new printer

What are the steps to install and configure a network printer HP Laserjet 4000 to use as standard printer for printing reports. Currently I use default noprint printer.

After defining Printer at Operating System Level on Concurrent Manager Node , check if you can print via lp ( I assume you are using Unix/Linux)
Then register it via Register Form at Install -> Printer -> Register .
Check more on printer basics in Apps at
http://becomeappsdba.blogspot.com/2006/09/printer-basics-in-oracle-apps-11i.html
Atul
http://teachmeoracle.com

Similar Messages

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to Install and configure SAP Java GUI on windows 2003 sp1.

Dear All,
Can I step-by-step on how to install and configure SAP GUI for Java on windows 2003 sp1.
Pls come with brief as I am completely new to Java and I am practicing the same on my home system first. I have latest SAP Java Pack with me.
Regards,
Dillu

hi,
Please check this link and install accordingly
SAP GUI Family
Regards,
Naveen.

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How to install and configure smtp on iis 7 on windows 7

how to install and configure smtp on iis 7 on windows 7?
Thanks!

Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

How to install and configure Eclipse???

Can any one guide me how to install and configure Eclipse to use it with jdk 1.5??

how to install eclipse?
you don't need to install eclipse just extract it to a specific path...
install j2se 1.5 then eclipse will automatically detect it...

How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

Hello,
We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
Can anyone please suggest me how to install and configure OSB.
Regards,
Anil

Hi
Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
Regards,
Mitja

How to install and configure management agents on Tru64 Cluster

We are busy rolling out the Oracle 10g Grid Control to our enterprise and one of our targets is a two-node Tru64 cluster with shared file systems, i.e., each node can see (read/write) the file systems concurrently. Trucluster software is responsible for the clustering management.
On node1 we have a set of databases each with its own dedicated listener; the same for node2. Each cluster managed service set has its own logical hostname. For example, we have on node1:
db1 (database)
listener-db1 (listener for db1)
node-db1 (logical hostname for db1 service)
Upon switchover or failover, the database and listener are brought up on node2 and we need to cater for this in our management agent configuration. I am trying to work out how we install and configure the management agents in such a configuration. Has anyone done this or does anyone know how to set up the agents suitably?
I have already installed the agent on one of the nodes - that worked fine, and I have even managed to start another agent up using the installed software home on the other node using "agentca -f"

You the Cluster type of configuration. It is documented in the install guide you have

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

Hi,
Edge role is design for perimeter networks, to keep security risks minimum. So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
Thanks.
MachPanel - Premium Cloud Automation Solution

How To Install and Configure External Drivers for the JDBC & JMS Adapters

Hello colleagues,
Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
VERSION 7.10.
BBDD ORACLE - ojdbc14.jar
Regards.

Hi ,
Uisng Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
refer this two links,the procedure available how to deploy using JSPM.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
Regards,
Raj

How To Install and Configure External Drivers for JDBC & JMS Adapters"

hello ,
where can i download this Guide "How To Install and Configure External Drivers for JDBC & JMS Adapters"?
thanks
best regards
pietro greco

Hi Eleonore Rosenthal,
Could you please check the below links:
http://help.sap.com/saphelp_nwpi71/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/frameset.htm
Regards,
S.Manu.

How to Install and Configure Workflow For PO in Oracle Apps Version R12

Hi,
Please do let me know how to install and configure Workflow for Purchasing in Oracle Apps R12 Version.
I want to the standard setup of workflow configuration for the PO.
Thanks and Regards
Srini

Hi Suresh
Only the latest version of WLP which is WLP 10.3.2 has facility to integrate with Oracle UCM with Adapaters. So make sure that you do have this latest version of WLP 10.3.2. Older versions like WLP 10.3 do not have this provision.
Also I guess when you install and configure this Oracle UCM Adapater and choose above WLP Home, I guess these modules may be added in already installed WLP folders. I checked on my side for WLP 10.3.2 and I could NOT find the modules you mentioned. So most probably you may be missing some installation/configuration stuff from UCM side.
Thanks
Ravi Jegga

I have downloaded a latest version of firefox but how to install and configure in ubuntu 11.04

how to install and configure in ubuntu or i was trying to upgrade firefox to the latest version in ubuntu 11

Hi,
There's information on that here: [[Installing Firefox on Linux|Installing Firefox on Linux]]
Jack

How to install and configure nwportal7.3

HI
Can any one guide me how to install and configure nwportal, main objective of the configuration is i want to install ess and mss components,
for this what components i have to install in portal. can any one guide how to find the nwportal installation guide
regards
vredddy

I reported this to the moderators since clearly you didn't spend 5 minutes trying to search for the guides yourself. However, for some reason the moderators didn't agree with my report. Anyway, what operating system and database would the portal be running on? See the this link for a list of installation guides. When installing portal select at least AS, EP, EPC, BASIC and NW-MODEL usage types. After portal has been installed, you can start installing and configuring ESS and MSS. The next steps depend on your ERP release. Which is what? Include EHP level whether MSS Add-On or HR Renewal is installed (assuming pre EHP7). You might have to deploy business packages on your portal and you might have to activate business functions in your ERP system. Since there are so many variables, you won't find one guide that gives all the instructions. You will have to read the application help and blogs/documents/discussion threads on SCN for instructions.

How to install and configure "SAP MAPI Service Provider" in 470(basis 620)?

Hi everyone,
Requse:
Send E-mail from SAP and Recive E-mail from MS outlook2003.
My question:
How to install and configure "SAP MAPI Service Provider" in 470(basis 620)?
For example:
Which setting need to do in R/3 server?
Which parameters need to select when install 620gui?
Which setting need to mark in MS outlook2003?
Thanks and Regards,
Colin.

Hi Colin,
For SAP MAPI read,
http://help.sap.com/saphelp_46c/helpdata/en/04/81dd4ebf2811d2897f0000e8216438/frameset.htm
For Sending mail from SAP,
http://help.sap.com/saphelp_46c/helpdata/en/55/a8b538891b11d2a25a00a0c943858e/frameset.htm
For Receiving mails read,
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/frameset.htm
<b>Which parameters need to select when install 620gui?</b>
Don't get this question...
<b>Which setting need to mark in MS outlook2003?</b>
None
Regards
Juan
Please reward with points if helpful

How to install and configure a new printer

Similar Messages

Maybe you are looking for