How to Install & Configure Web Dispatcher

Hi techies,
How to install and configure SAP Webdisptacher in an existing BI System.
What are the parameters need to be set after installation like ports, memory , profile parameters etc., for webdispatcher.
I am new to this concept
Thx in advance.
Haroon Khavi.

Hi,
The webdisp does not need the SID of the system it is connecting to. The only parameter it needs is a "Unique Instance Number for SAP Web Dispatcher (SAPSYSTEM)".
You can check this with the following command:-
sapwebdisp -bootstrap
If you are installing the webdisp on a server that already has a SAP instance then you have to enter a unique number (not the SAP instance number). You can used any value from 0-99.
This parameter is used for shared memory allocation so should not be the same as the SAP instance or any other webdisp installed on the same server. Of course if there is only the webdisp on the server than any value from 0-99 can be used.
Hope this helps
Michael

Similar Messages

SOLMAN_SETUP/ preparation phase 5.1 configure web dispatcher config failed.

Hello
Based on SAP Solution manager 7.1. SPS 11 Fresh install, SOLMAN_SETUP/ preparation phase 5.1 configure web dispatcher config failed.
Error message:
L3 - Failed to reach test WS through System Settings (ICM/HTTPURLLOC):
http://vip.myfqdn.fr:80
L2 - Test WS can be reached through ICM:
http://hostname.myfqdn.fr:8000
SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Solman is located in a DMZ, http/https are configurated in table
HTTPURLOC and load balancer is used to publish http and https url and port redirection
instead of native url « hostname » + default port (80xx / 443xx)
• In DMZ for url
http://hostname.myfqdn.fr:8000/ManagedSetupWS/Config1?style=document
system answer is OK
• In LAN via Load balancer url return KO message
http://vip.myfqdn.fr:8000/ManagedSetupWS/Config1?style=document
Any help will be appreciate.
Regards
Eric

Hi All,
I have resolved the issue with re-setting the password of SM_INTERN_WS & SM_EXTERN_WS.
from step 1.
with no-dispatcher configuration..
Regrads,
Gagandeep Singh

Issue in Installing Sap Web Dispatcher

Hi Experts,
We have Installed Sap Web Dispatcher in our landscape for https connection and we have generated the pse certificate .We were stuck in the next step as we have to forward this request to a certification authority such as Verisign or Thawte.
Can you please let us know the process on how we have to forward this request to Certification Authority.
Thanks in Advance..
Regards,
Krishna.M

Hi,
You are right ... It does NOT matter.
Here is no unicode/non-unicode version available for the webdispatcher.There is only one version available, and this use the non-unicode kernelpackage. You can carry on with the installation without any problem.
Rgds,
Sheikh Saggaf

How to install & configure Oracle9i

How to install & configure Oracle9i

Hi,
The Oracle installation mainly depends on which OS are u using.
1.If u are using as a windows platform.... it is easy ..just follow the GUI mode of installation from the 3 disks ..u can download the database from www.otn.oracle.com site.
2.If u are installing on the Unix platform ..then it is little bit tricky and also depends on the which flavour of unix u are using.
For unix installtion ..
1.u have to set the kernel parameters first and then reboot the system.
2.creating the groups dba and oracle .. granting the group privs
3.create the profile file for setting the environ variable...
4.Then follow the GUI mode of installtion for the rest..
about the patches ... u need to be specific about the type of unix flavour ur using and the version.
hope this helps.....
Thanks,
With Regards,
Praveen Shiva

How to install/Configure/Use VT Hash Check to detect Malware/Unwanted programs in Windows?

This just to share the below post with windows users..
How to install/Configure/Use VT to detect Malware/Unwanted programs in Windows?
http://www.windowstechinfo.com/2014/03/how-to-installconfigureuse-vt-to-detect_29.html
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

That is interesting. Normally a bootmgr error message means that the boot loader is corrupt and hard disk not "dead".. Replacing the hard drive is a quickie shotgun method of resolving the issue.
Did you give up on the SSD?
The desktop ( w/ASUS Crossfire V Formula-Z mobo) I am using to type this, has the same SSD that you asked about. I used the method I described in the earlier post to clone the OS to the SSD. The SSD is the boot drive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to install Oracle Web toolkit

Hi,
I wantto install Web toolkit on Win2k server machine. I'm using oracle 9i rel. 2 .do i have install Ä°AS ?? how can install the web toolkit ?
thanks in advance

Kashif,
it does NOT help to ask the same question 3 times in 3 different entries, nor will you receive extra credits for it..
searching on OTN came up with this link..
http://www.oracle.com/technology/tech/java/newsletter/august05.html
and this as the product site
http://www.oracle.com/technology/products/webservices_manager/index.html
right side, search down, link to 10.1.2.0.2 download
accept the terms and conditions .. and scroll down to download
this brings you to
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
and then search for Web Services Manager

Error when configuring Web Dispatcher for SSL with Enterprise Portal

We are in the process of configuring the Web Dispatcher using SSL to connect to our Enterprise Portal (the Web Dispatcher will be in the DMZ). We have followed all of the help.sap.com guides and now have SSL listening on the EP side (port 8103). We are now receiving this strange certificate error when we start the Web Dispatcher:
[Thr 5332] Tue Mar 20 00:36:23 2007
[Thr 5332]   MatchTargetName("<FULLY QUALIFIED HOSTNAME>", "CN=XXX, OU=XXX, O=XXXX, C=XX") FAILS
[Thr 5332]   SSL socket: local=<IPADDRESS>:4742 peer=<IPADDRESS>:8103
[Thr 5332] <<- ERROR: SapSSLSessionStart(sssl_hdl=009D7670)==SSSLERR_SERVER_CERT_MISMATCH
[Thr 5332] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-30): SSSLERR_SERVER_CERT_MISMATCH [icxxconn.c 2005]
[Thr 5332] *** ERROR => IcmConnClientRqCreate() failed (rc=-14) [icrxx.c      4919]
[Thr 5332] *** ERROR => Could not connect to SAP Message Server at <FULLY QUALIFIED HOST NAME>. URL=/msgserver/text/logon?version=1.2 [icrxx.c      2301]
[Thr 5332] *** ERROR => rc=-1, HTTP response code: 0 [icrxx.c      2302]
[Thr 5332] *** ERROR => see also OSS note 552286 [icrxx.c      2303]
We have gone through the trouble shooting note 552286 as listed in the error above. Any assistance is appreciated.

Hello, did you receive any resolution for this problem? We are receiving a similar error and I am unsure of how to resolve.

How to install Apache Web Server with PHP on Sun Solaris Sparc machine

Hi,
We are trying to install the Apache Web Server and the PHP package on a Sun Solaris Sparc machine running on SunOS 5.8. We are having compilation problems with the source code of both these packages.
Does anybody know if there are ready solaris packages for Apache and PHP available from where we can download and install instead of source code compilation?
Or any instructions / things to watch for when installing Apache with PHP (if anybody has tried installing Apache with PHP on Sun Solaris earlier) is most welcome.
Thanks,
Harish

Apache should be bundled along with Solaris check in "/var/apache" in Solaris 8 and Solaris 9
php is available at www.php.net
I found an old document for installing PHP maybe this will help.
Cheers
-Dhruva
+++++++++++++++++++++++++++++++++++++++++++++++++++++++Installing PHP 3.x for Apache 1.x.x on Solaris
Introduction
This document describes how to install PHP for Apache on Solaris.
You should have Apache installed before trying to install PHP.
If you want to use PHP with MySQL then you must install MySQL first.
Before we Begin
1. These instructions assume that you have Apache installed according to instructions.
Getting PHP
1. You must be logged in as root to perform this installation.
su root
2. I save all my downloads in:
/usr/local/dist
If you don't already have one, you may need to create that directory now:
mkdir /usr/local/dist
3. You can get PHP 3.0.14 from here(www.php.net).
cd /usr/local/dist
ftp ftp.php.net
cd pub/distributions
bin
get php-3.0.14.tar.gz
bye
Installing PHP
1. We will install PHP in /usr/local/build, but use a tricky tar command
to do it in on hit from the download directory:
cd /usr/local/dist
tar xvfz php-3.0.12.tar.gz -C ../build
Compiling PHP
1. First let's get where the action is:
cd /usr/local/build/php-3.0.14
2. You now have 3 options:
* Simple PHP install without MySQL - goto step 3
* Simple PHP install with MySQL - goto step 4
* Custom PHP install - goto step 5
3. Simple PHP install without MySQL. Next, jump to step 6.
./configure --with-apache=../apache_1.3.12
4. Simple PHP install with MySQL. MySQL must be installed before you can configure PHP to use it. I recommend that MySQL should always be reachable with /usr/local/mysql. Even if you install it else where you
should create a symbolic link from /usr/local/mysql. Otherwise the compiler can have problems finding the mysqlclient library. The command
should look like this:
./configure with-mysql=/usr/local/mysql with-apache=../apache_1.3.12
Next, jump to step 6.
5. Custom PHP install. Take a look at the available configuration directives by using this command:
./configure --help
6. Now we can make the PHP executable. This may take a while.
make
7. Now we install the PHP module with:
make install
Adding the PHP Module to Apache
1. Now we have to setup Apache to include the PHP module:
cd ../apache_1.3.12
2. Re-configure Apache to use the PHP module. You should use your previous Apache configure command along with the PHP activate module directive.
You can see your previous Apache configure command by doing:
cat config.status
You can configure Apache using the previous command with the added PHP module by doing:
./config.status --activate-module=src/modules/php3/libphp3.a
If you used the simple Apache install from instructions the command will look like this:
./configure prefix=/usr/local/apache activate-module=src/modules/php3/libphp3.a
3. Make and install Apache with PHP enabled:
make
4. We need to stop the server before installing the files:
/usr/local/apache/bin/apachectl stop
5. Now we can install the new binaries:
make install
6. Start apache again (now running the new php enabled version):
/usr/local/apache/bin/apachectl start
Setting Up PHP
1. We have to tell Apache to pass certain file extensions to PHP. We do this in Apache's httpd.conf file.
cd /usr/local/apache/conf
2. Edit the httpd.conf file. If you do a search for php you will find a couple of commented out lines telling Apache to use the PHP module. You should uncomment them to look like this.
AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps
3. I prefer to use the extension .phtml, you can use whatever extension you like (even .html) by adding lines to httpd.conf like this:
AddType application/x-httpd-php3 .phtml
Check that it Works
1. We have to restart Apache to make these changes take effect on the running server.
cd /usr/local/apache/bin
./apachectl restart
2. Apache should now be running with PHP enabled. The server version should include PHP/3.0b2.
./apachectl status
Apache Server Status for dev.synop.com
Server Version: Apache/1.3.9 (Unix) PHP/3.0.12
Server Built: Oct 25 1999 00:37:07
3. Now it is time to test PHP with a page. The simplest thing to do is create a page called test.php3. My file is here. This file contains the
following text:
<?php phpinfo(); ?>
4. Point your browser at this file on the virtual host which you used:
http://localhost/test.php3

How to install interMedia web agent

Hi folks,
I downloaded im8154_lnx.zip (interMedia Web Agent 8.1.5.4) for linux
from Oracle. The webserver I am using is Oracle HTTP server.
Before I install the web agent, the HTTP server works fine.
I read the document for installing interMedia web Agent, however,
it is not the case when I tried to install the agent. For example,
the doc asks me to include mod_oraordwscias.conf in the oracle_apache.conf file,
but the mod_oraordwscias.conf file doesn't exist. I only have three
files in the /ord/web/apache/:
mod_oraordwsc.c mod_oraordwsc.h mod_oraordwsc.module
I also don't understand what's the file mod_oraordwsc.module for.
Does anyone know how to make the interMedia Web Agent module works with
Oracle HTTP server? Thank you so much.
Best regards,
Kai Huang

Hi Kai,
The interMedia Web Agent is not available for the Oracle HTTP
server on Linux, nor are there plans to port it or support it on
any platforms or web server configurations other than those shown
below. For information on alternatives to the Web Agent,
please see the interMedia software page on OTN:
http://otn.oracle.com/software/products/intermedia/software_index.htm
The closest equivalent of the Web Agent is the interMedia Code
Wizard for the PL/SQL Gateway.
Regards,
Rajiv
Platforms/web server configurations supported by interMedia Web Agent:
Platform
Web Server Solaris Windows NT Linux
Oracle HTTP Server 8.1.5.4.1 8.1.5.4.1 Not available
powered by Apache
Apache Web Server 8.1.5.4 8.1.5.4 8.1.5.4
from www.apache.org
iPlanet Web Servers 8.1.5.4 8.1.5.4 8.1.5.4
from Netscape/Sun
Microsoft IIS Not applicable 8.1.5.4 Not applicable
Oracle Application 8.1.5.4 8.1.5.4 Not available
Server
Note that 8.1.5.4.1 is the latest (and only) version of the Web Agent
installation kit maintained on OTN. Please see the OTN page for more
information on supported Oracle client (OCI) versions.

Need help on how to install external web cam on a macbook?????

Hi , does anyone have any idea if you can install and use an external webcam and how to install it on a macbook 13.3 in, black, 10.4.11 with intel processor. I have tried like months and months to connect my logitech web cam with no success what so ever. I been racking my brains trying to figure it out. I even called tech support by phone and they weren't really any help. They just said it can be done. I tried downloading the drivers that came in a cd with the logitech and nothing. Every time I try and use my external logitech on a site the built in one on the macbook comes on instead. There has to be a way to bypass the built on one. I know there has to be people out there using external webcams on macbooks. Any help would be appreciated.

Centaur3 wrote:
Hi , does anyone have any idea if you can install and use an external webcam and how to install it on a macbook 13.3 in, black, 10.4.11 with intel processor. I have tried like months and months to connect my logitech web cam with no success what so ever. I been racking my brains trying to figure it out. I even called tech support by phone and they weren't really any help. They just said it can be done. I tried downloading the drivers that came in a cd with the logitech and nothing. Every time I try and use my external logitech on a site the built in one on the macbook comes on instead. There has to be a way to bypass the built on one. I know there has to be people out there using external webcams on macbooks. Any help would be appreciated.
I can't advise on your Logitech webcam, but I am using [this webcam|http://www.bestbuy.com/site/Dynex%26%23174%3B-+1.3MPWebcam/8703094.p?id=1199495403693&skuId=8703094]. First used on a iMac G5, OSX 10.4, then later moved to a Mac Mini OSX 10.5 (and now OSX 10.6.2 on the Mini.) I got it not because it's the best webcam, but because it was one of the few that said it worked with OSX 10.4. (Other webcams I had needed 10.5.) I have tested it on my Macbook Pro (OSX 10.5 and upgraded to 10.6) and it works, but I don't normally use it there.

How to install Apache Web server on my SAP Content Server

Dear Experts,
I am in the process of installaing Content Server in my landscape, i am working on Suse Linux 10 SP2 and planning to install ContentServer 6.30.
I have read the standard SAP installation document for the same and it says that we need to install Apache Web server version 1.3.XX, so i have downloaded the file apache_1.3.27-x86_64-whatever-linux22.tar.
Now i want to know the following before i take any actions on my further installation of the Content Server
What is the difference between Apache and httpd servers (services) are they different or same
Is the file apache_1.3.27-x86_64-whatever-linux22.tar correct to install Web Server on my Linux system
Do i have to download any other httpd files
How to install and start the Web server on my Linux
Waiting for some information
Thanks and regards
BasoKing

You can install a higher apache also (2.2.x), I'd not use the old versions. I'd also not use a "somwhere" compiled apache, you don't now if that version is clean.
I'd rather compile an own one, it's not that difficult:
Note 664384 - Generation info for Apache Web server for SAP Content Server
The result will be a default webserver (httpd) without any unnecessary modules compiled in.
Markus

How to install & Configure HTMl DB with Ora 9.2 Database

Hi,
I have oracle 9.2.0.4 database installed. I have to install & configure HTML DB to use this database & from sites i have come to know that i can associate it with Ora 9.2 HTTP server too. Can some one explain me if HTTP DB can be installed & configured to user Ora 9.2 Database & HTTP Server. If its possible then pls let me know the steps to follow. Currently i have just ora 9.2.0.4 database installed.
Regds
Rajan Kumar

Rajan,
Please refer to this document: http://www.oracle.com/technology/products/database/htmldb/howtos/howto_use9ir2ohs.html
Thanks,
- Scott -

How to Install, Configure and getting started with Hyperion Web Analyzer9

i have installed both
Hyperion Reporting and Analysis - System 9 Services Release 9.3.1 Microsoft Windows x86 Installer.
Hyperion Reporting and Analysis - System 9 UI Services Release 9.3.1 Microsoft Windows x86 Installer
Now tell me step by step on how to configure and how start Web analyzer
I dont know how to start server/services. (Any Web server required?)
Getting started would be more helpful.
Need help ASAP.
thanks,
Ram

Hi,
First of all have you installed Shared Services as you will need that as that foundation of the installation.
You will also need to install other components such as essbase if you intend to use it with web analysis.
If you have done that, then you will first need a repository to hold Reporting and Analysis information.
Afte start up the configuration utility and select the Reporting & analysis elements and go through the steps entering
details such as shared services connection, repository information.
It should install the components as a service.
You should really read the installation document :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
Cheers
John
http://john-goodwin.blogspot.com/

For PrintControl.cab in crystal reports 2008 How can i configure Web.config in VS2005

hi, Now i am using crystal report 2008 evalution with VS2005. In my ASP.net Application Viewiing reports using Crystalreportviewer PrintMode=ActiveX (not in PDF).If i am trying to print using Printcontrol.cab..in the client machine the activeX control is not installing in client. Its works good with crystal report bundle with 2005. with crystal report 2008 its not working. I want to know how i configuer web.config and others. Help me Pls.
Instead of these code
<configSections>
<sectionGroup name="businessObjects">
    <sectionGroup name="crystalReports">
      <section name="printControl" type="System.Configuration.NameValueSectionHandler, System, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, Custom=null" />
    </sectionGroup>
</sectionGroup>
</configSections>
<businessObjects>
<crystalReports>
    <printControl>
      <add key="url" value="http://myserver/PrintControl.cab" />
    </printControl>
</crystalReports>
</businessObjects>
new version=??? Publictokenkey=?????
Thank u in advance

The workstation machine needs to be logged in as someone with administrative access.

Mupen64Plus 2.0 hg in AUR; HOW TO install & configure controllers

With version 2.0 Mupen64Plus has undergone large changes "under the hood". Mupen64Plus is now modular, and as such the standard plugins has been split into several different packages/repositories. At the moment there exists the following modules:
* mupen64plus-core
Core module of the Mupen64Plus project
* mupen64plus-ui-console
Console (command-line) front-end user interface for Mupen64Plus v2.0 project
* mupen64plus-audio-sdl
Audio plugin for the Mupen64Plus v2.0 project, using SDL. This plugin is based on the original jttl_audio plugin in Mupen64.
* mupen64plus-input-sdl
Input plugin for Mupen64Plus v2.0 project using SDL. This is derived from the original Mupen64 blight_input plugin.
* mupen64plus-rsp-hle
RSP processor plugin for the Mupen64Plus v2.0 project. This plugin is based on the Mupen64 HLE RSP plugin v0.2 with Azimers code by Hacktarux
* mupen64plus-video-rice
Video plugin for the Mupen64Plus v2.0 project, using OpenGL. This plugin is based on the RiceVideoLinux plugin from earlier versions of Mupen64Plus.
Note however, that mupen64plus-core (or mupen64plus-core-hg on AUR) is just the core, and does not include a frontend. The Qt and GTK frontends have been scrapped, though, and the only existing frontend so far is mupen64plus-ui-console, which is a CLI frontend. You launch a game with mupen64plus-cli, see mupen64plus-cli --help for more information. As a sidenote, I believe that the Mupen64Plus team would appreciate if someone helped with creating a GTK frontend, since I believe the head developer(s) will probably be focusing on the Qt frontend if any.
The Rice Video plugin in Mupen64Plus 2.0 fixes a problem that at least I and another person had with xf86-video-ati and the old Rice, which made us unable to play in fullscreen.
Installing
To get Mupen64Plus 2.0 working, you will need to install all six modules. They are all part of the mupen64plus-hg group, but unfortunately neither yaourt nor the AUR web interface supports groups as far as I know, so you will have to install each module separately. With yaourt:
yaourt -S mupen64plus-core-hg mupen64plus-ui-console-hg mupen64plus-audio-sdl-hg mupen64plus-input-sdl-hg mupen64plus-rsp-hle-hg mupen64plus-video-rice-hg
The only way I can think of to make it easier to install, would be if I created an empty PKGBUILD that simply depended on all the modules, but I find this to not be a technically elegant solution.
Configuring controllers
With Mupen64Plus 2.0, a feature has been added to auto-detect and auto-configure USB controllers, but at the time of writing only a handful of controllers are supported:
* Logitech Dual Action gamepad
* Logitech Cordless Rumblepad 2
* Microsoft X-Box 360 pad
* N64 controller
* SAITEK P880
* Mega World USB Game Controllers
You know your controller isn't supported if you get the following messages when running mupen64plus-cli:
Input: N64 Controller #1: Disabled, no configuration data for 'YOUR CONTROLLER NAME HERE'
Input Warning: No SDL joysticks found
Input: Mupen64Plus SDL Input Plugin version 2.0.0 initialized.
If it is supported, you will get something like:
Input: N64 Controller #1: Enabled, using auto-configuration for joystick 'YOUR CONTROLLER NAME HERE'
Input: 1 SDL joysticks found, 1 plugged in and usable in the emulator
Input: Mupen64Plus SDL Input Plugin version 2.0.0 initialized.
Now, if your controller isn't supported, there are two things you can do, and I strongly recommend that you do the first, but you will probably want to do both unless you're patient (if your controller works, but you want to configure it, skip to step two):
Step 1:
Follow the intructions on http://www.emutalk.net/showthread.php?t=49731. If you have the old config file, but no longer have Mupen64Plus 1.5 installed and therefore cannot follow step 8 in the post, the controller name shown in
Input: N64 Controller #1: Disabled, no configuration data for 'YOUR CONTROLLER NAME HERE'
will work too. This will allow the Mupen64Plus team to include your controller for auto-detection.
Step 2:
Now you will probably want to configure the controller, especially if it wasn't supported already. You will need to edit the config file ~/.config/mupen64plus/mupen64plus.cfg, since no GUI frontend exists yet. Since revision 55 of mupen64plus-core, Mupen64Plus will create the config file if none exists when launching a game (previously you had to run mupen64plus-cli with the flag --saveoptions to create the config file). Mupen64Plus does not need a config file to run, but if you wish to tweak the settings you will need it.
Now, the section you will be interested in is [Input-SDL-Control1] (and possibly the other controller sections). If your controller is supported already, you will see some default settings and it will be quite easy to edit them. Otherwise the sections will be completely empty. Here follows my [Input-SDL-Control1], which you can copy and change to fit your needs. If you have your blight_input.conf you can use it as a reference to make it easier. For a list of options, see http://www.emuwiki.com/index.php?title= … #Input-SDL.
[Input-SDL-Control1]
# Specifies whether this controller is 'plugged in' to the simulated N64
plugged = True
# Specifies which type of expansion pak is in the controller: 1=None, 2=Mem pak, 5=Rumble pak
plugin = 1
# If True, then mouse buttons may be used with this controller
mouse = False
# Specifies which joystick is bound to this controller: -1=None, 0 or more= SDL Joystick number
device = 0
# The minimum absolute value of the SDL analog joystick axis to move the N64 controller axis value from 0. For X, Y axes.
AnalogDeadzone = "4096,4096"
# An absolute value of the SDL joystick axis >= AnalogPeak will saturate the N64 controller axis value (at 80). For X, Y axes. For each axis, this must be greater than the corresponding AnalogDeadzone value
AnalogPeak = "32768,32768"
# Digital button configuration mappings
DPad R = "hat(0 Right ) "
DPad L = "hat(0 Left ) "
DPad D = "hat(0 Down ) "
DPad U = "hat(0 Up ) "
Start = "button(9) "
Z Trig = "button(7) "
B Button = "button(0) "
A Button = "button(2) "
C Button R = "axis(3+) "
C Button L = "axis(3-) "
C Button D = "axis(2+) "
C Button U = "axis(2-) "
R Trig = "button(6) "
L Trig = "button(4) "
Mempak switch = ""
Rumblepak switch = ""
# Analog axis configuration mappings
X Axis = "axis(0-,0+) "
Y Axis = "axis(1-,1+) "
Note:
At the time of writing there is a bug in the parser which requires the extra space after the direction in the hat event, for example "hat(0 Up )". Otherwise it will read the direction as (in this case) "Up)" which is invalid and will be ignored. The trailing space after the ending parantheses is not required, and is merely a side effect of how the program that generates the config file works.
Note that you can combine options:
A Button = "button(2) key(38) mouse(1)"
This will map both button 2 on the controller, key 38 on the keyboard and the left mouse button to the A button in Mupen64Plus.
If anyone encounters any other problems, feel free to ask.

Dheart wrote:...
Someone should add this to "READ BEFORE POSTING"
This is not Ubuntu forum. You shouldn't EVER post such howto on the forum, we have a wiki for that reason. That thing you've written should go the wiki and then post a topic at wiki discussions and ask for opinion.
Please, don't do that again, just contribute to the wiki.
Yes, I'm quite aware that the wiki exists. The reason I'm writing it here is that the GUI frontends will probably come quite soon, and overall this is an early version. I don't see a reason to contribute this to the wiki when it will probably be unneeded and out-of-date relatively soon.

How to Install & Configure Web Dispatcher

Similar Messages

Maybe you are looking for