How to install SCCM client in native mode on kiosks machine

Please share the whole process of sccm client installation and server configuration for kiosks machine

https://www.dropbox.com/s/xcf57h95j1b90am/SC2012_ConfigMgr_DocDownload.docx
Hope this link help you
DushYant'

Similar Messages

How to install sccm client on bulk collections using push installation

Unfortunately I did something and received the following description:-
How to know/reproduce the following scenario by installing sccm client on bulk collections in SCCM 2012R2?
"User ***** requested that the CCRs will be generated for collection “All Windows Client Systems (P0100015), The SMS Provider did not generate CCRs for all the system resources in this collection.
Possible cause: some system resources are not assigned to the current site, and you chose to insta
Il clients only on system resources that are
assigned to current site.
Another possible cause: Some system resources do not have Microsoft Windows NT operating system
or above installed.
Message ID: 30110"

Ok. Some of your clients are not covered under any site assignment boundary, hence you are getting that error. Would recommend you to select "Install the client from a specified site" and select the Primary site. If your boundary groups for content
are configured fine then the client will be installed from the appropriate site for each machine you are pushing the client to.
-RG

Install Oracle8 client in silent mode under windows environment

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

I would like to know how can i install Oracle8 client in silent mode under windows
environment.
I would appreciate a prompt reply on this

How to install oracle client on pentium 4

please can someone tell me how to install oracle client 8i on pentium 4 system. the installation is not going automaticlly , and if i explore the cd and press on the setup file the installing didnt start.

8i definitely has problems with Pentium IV processors. The fix is to copy the entire CD to the hard drive and then rename each copy of symcjit.dll to symcjit.old.

Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence

Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!

Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)

Unable to install sccm client from SCCM console install client option

Hi
Unable to install client on windows 7 64 bit enterprise from sccm console. The client is discovered in sccm console with status client = NO, so we want to install sccm client from console remotely.
We cannot enable push install. my id has full access on SCCM site server SCCM product also admin rights on workstations. I am able to access net bios path SMS_<site code> of site server then client path from client machine. machine is in domain and
is boundry of sccm .
Client push install in console is diabled
Regards Sushain KApoor

Hi!
Examine the ccm.log located in <SCCM 2007 InstallationPath>\LOGS on the site server.
Best regards
Henrik

How To: Install a Client Agent link broken

I wanted to know if there was a new version of the agent and found the link broken
[Quote]
When you select an agent from the table of sync groups and sync agents on the SQL Data Sync landing page, you go to the sync agent page.
SQL Data Sync Client Agent
When you select a client agent from the SQL Data Sync landing page, three buttons appear at the bottom of the page.
REFRESH
MANAGE KEY
Create a new agent key. After you create an agent key, launch the agent and submit the new key value.
DELETE
Delete the selected client agent.
For more information on Client Agents, see the topics
How To: Install a Client Agent,
How To: Register a SQL Server database with a Client Agent, and
How To: Change an Agent's Key on MSDN.
[/Quote]
I keep getting redirected to http://www.microsoft.com/fr-fr/default.aspx

Hi,
Thank you for the feedback. I will have the relevant team notified.
You can have a check on the below link for SQL Data Sync (Preview) Client Agent.
http://msdn.microsoft.com/en-us/library/azure/jj823137.aspx
Regards,
Mekh.

I can't install sccm client

hi,my client os is win server 2012 r2,
i want to install sccm client on it ,but i failed. why?
i want to know if the client can be installed on this version os.
thks

hi,my client os is win server 2012 r2,
i want to install sccm client on it ,but i failed. why?
ccmsetup log as follows:
<![LOG[Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context=""
type="0" thread="8088" file="siteinfo.cpp:678">
<![LOG[Checking compatibility of site version '5.00.7804.1000', expect newer than '5.00.7845.1000']LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="1" thread="8088"
file="siteinfo.cpp:703">
<![LOG[Client version '5.00.7958.1000' is not compatible with the site '001' version '5.00.7804.1000'.]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="2" thread="8088"
file="siteinfo.cpp:721">
<![LOG[Client version '5.00.7958.1000' is not compatible with the site '001' version '5.00.7804.1000'. Fail the installation.]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="3"
thread="8088" file="ccmsetup.cpp:1462">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='324' will not be sent.]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="1" thread="6012"
file="ccmsetup.cpp:9763">
<![LOG[CcmSetup failed with error code 0x87d0029d]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="1" thread="6012" file="ccmsetup.cpp:10879">

OSD Task Sequence fails to install SCCM client

Hello,
Our OSD task sequence fails to install the SCCM client with certain images.
The TS gets to the "Setup Windows and Configuration" step, during which it downloads all the necessary SCCM client files (silverlight, C++ redistributable, client.msi....etc.). At this point computer restarts and in never loads back into the
task sequence, instead it enters the minisetup (setup is starting services, setup is installing devices, setup is applying system settings...preparing computer for first use), after which the computer restarts and you are back at the CTR+ALT+Del screen.
The computer has joined the domain and has run all other steps but it has failed to install SCCM client. I can also see the leftovers of an incomplete TS under c:\_SMSTaskSequence
If we change the image specified under "Apply Operating System" step, everything works ok.
It appears there is something wrong with this particular image. Any ideas?
Logs show no errors. Let me know which logs you'd like me to post (and from which location)
There is no ccm folder under c:\windows

Hoping you are using ConfigMgr 2012 R2. If a client machine Join to Domain and doesn't proceed with other steps and not installing the CCM client, then problem seems to be with the Image.Do you have any RunOnce registry setting specified in the Image? You
can mount the Image and check those settings.
RunOnce Key Reference :
https://msdn.microsoft.com/en-us/library/windows/desktop/aa376977(v=vs.85).aspx
If the above key is present in the Image, TS Engine won't resume after the reboot.
You need to use a new variable "SMSTSPostAction" at the end of the Task Sequence, to add your custom actions.
The above variable is applicable in CM 2012 SP1 and R2.
Thanks, Senthil. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Click on "vote as Helpful" if you feel this post helpful to you. This
can be beneficial to other community members reading the thread.

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Here is the short answer:
Installing Snow Leopard Server into Parallels 10 for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

Internet Based Clients and Native Mode

Hi guys,
I have a question.... We have SCCM 2007 SP2 running in mixed mode in the environment. Now we plan to support internet based clients. Here is the current Hierarchy in mixed mode.
1 Central Server
1 Primary Server
3 Secondary servers under above Primary Server
Now as the requirement is to support internet based clients and want them to support on office LAN as well when they come to the office....this is what I would be doing : ( Theoretically I know, I need the practical steps to achieve that )
1. Get all the 3 PKI Certificates : Site Server Signing, Web Server, Client agent.
2. Make sure all the required ports are opened in-between Intranet <->DMZ AND DMZ <-> Internet
3. Migrate Central server from Mixed to Native Mode.
4. Install another Primary Server on Intranet in Native mode.
5. Create a site system server connected to newly created Native Primary Site in the DMZ zone with these roles installed : MP, SUP and DP.
6. Re-install all the SCCM clients in the environment with the command-line so that they can be supported on both internet and intranet.
7. Make sure internet clients are able to connect DMZ site system server via internet.
Please let me know if I'm missing something here and let me know the practical steps to achieve this.
Request you not to share Microsoft technet link for the same. Please share some step-by-step practical document etc.. to achieve this.
Thanks,
Sam

1. This is incorrect. You need more than a single web server cert and client cert. You need a unique server auth cert for *every* one of your systems hosting a client role like the MP, DP, and SUP. Also, you need a unique client auth cert for each and *every*
client that may/will connect via the Internet.
4. Standing up a whole extra site just to support IBCM is a bit overkill. It does allow you to keep your "main" primary site in mixed mode, but it does add some overhead and cost and is not technically necessary.
6. Incorrect. You only need to reinstall clients that will be configured as "Internet-only". Intranet clients should pick up the internet facing roles via policy. You can verify this by checking locationservices.log on the clients after they are successfully
communicating and the Internet facing roles are stood up and healthy.
You've made no account above for the CDP or CRL checking. This is a major stumbling block for many folks.
Jason | http://blog.configmgrftw.com

Installing Oracle Client in silent mode

I'm looking for the way how to install Oracla 8i or 10g in silent mode.
I don't know if this is possible.
I appreciate some help.
Best Regards.

This is about client:
http://download-west.oracle.com/docs/html/B10131_02/advance.htm#ABC639140

Install SCCM Client Post Install via MDT 2013

I want to know best practice on how to install the SCCM client via MDT 2013 as a post install task sequence? Im deploying a lot of machines via MDT offline USB....
Is it grabbing the ccmsetup folder and using the following command line?
ccmsetup.exe /noservice /MP:<insert> SMSSITECODE=<insert> smscachesize=10000

There's no such thing as a "best practice" for most real-world tasks; real-world is different for everyone which means you need to know the details and choose the right things for your environment.
You need to run the command-line that is appropriate for your environment just like you would for any manual install.
Without knowing any details about your environment, I would add the SMSMP and FSP properties to the above command-line. If this is truly an offline install, you shouldn't use /mp though, you should use /source and point it at the client directory.
Jason | http://blog.configmgrftw.com | @jasonsandys

Unable to install SCCM client on Windows Server 2008 R2 - certificate permission error?

I am trying to comply with corporate policy, which is, have an SCCM agent or client on every Windows device. I have successfully used the provided SCCM installer on other Windows 2008 R2 servers. However for one particular server I cannot get the SCCM agent
to install successfully. I've searched forums and documentation, but can't find a solution. Part of the problem is the lack of feedback by SCCM on what is wrong. I think I have narrowed down the symptom to the following error messages from the "C:\Windows\CCM\Logs\ClientIDManagerStartup.log":
[LOG[Certificate [Thumbprint C559304C1598F17641D0732EB9EB787169A25FA7] issued to 'SMS' doesn't have private key or caller doesn't have access to private key.
[LOG[Failed in GetCertificate(...): 0x87d00281]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="ccmcert.cpp:2122">
[LOG[CCMCreateAuthHeaders failed (0x8009200b).]LOG]!><time="10:56:59.014+300" date="04-17-2014" component="ClientIDManagerStartup" context="" type="3" thread="3024" file="clientauthutil.cpp:978">
When I use the Certificates MMC snap in to look at installed certs on this Windows Server 2008 R2 machine, there are plenty of normal and expected certificates there. There is also a branch called SMS with hundreds of entries, I have no idea what that is.
The above error seems to indicate a permissions issue. What do I do to fix this SCCM install? It seems like a server cert issue, not an SCCM issue, so I'm posting to the Windows Server forums.
Thanks in advance.
Thanks

this maybe helpful...
http://www.jamesbannanit.com/2011/04/certificate-requirements-for-sccm-2012/
should be asked in SCCM forum...
http://social.technet.microsoft.com/Forums/en-US/home?forum=configmanagerdeployment
Best,
Howtodo

How to install Oracle client Version 10.2.0.4 on a Windows server 2008

Hi,
I need to install an Oracle client on a Windows Server 2008 (32-bit), how do I do that?
I want to install Oracle client version 10.2.0.4 (Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications).
Pls. advice, I can't find instructions for this installation on Oracle.com or anywhere else.

thx, it looks promising...
but how to run the .jar files and which one to run, both Class12.jar and ojdbc14.jar, to start the installation?
Do I need to install the java runtime environment to run the .jar files?

How to install SCCM client in native mode on kiosks machine

Similar Messages

Maybe you are looking for