How to install the license via configtool

Hi
I just install Portal 2004S and I am at the point of installing the license via the configtool.
When I am opening the configtool, it ask me if I want to use the default DB settings
I say yes and its not able to connect to the DB..
I have install Oracle 10 successfully.
any ideas??
JF

Hi
Do you know where in the keystore what to do. Is there a document with the steps that I can download?? or maybe you know the steps
the last one I did, I was on portal 6.2 and you do that threw the portal itself..
JF

Similar Messages

How to install the license of wIPS? (Version 5.2)

I have purchased one AIR-MSE-3310-K9 and 100 hundred wIPS license to support 100 monitor mode AP (AIR-WIPS-AP-100)
With the version 5.2, where can i install the license ? into MSE or into WCS?? and how can verify them?
I didn't receive any paper license with PAK. Is the PAK necessary??

3310 can have upto 2000 client licenses. 5.2 version doesn't need license to be installed.
To order license for Cisco MSE and Context-Aware and Adaptive wIPS software SKUs, visit the Cisco Ordering Tool.
http://www.cisco.com/en/US/prod/collateral/wireless/ps9733/ps9742/data_sheet_c07-473865.html

How to install the db2 9.1 license

hi friend
how to install the db2 9.1 licence   in aix 5.3.
enviroment
os             : aix 5.3
data base : db2 9.1
sap componets : ecc + ep
regards
raja

Hi,
Just check out the snote 816773 which speaks about valid license to use DB2
1. You are an SAP customer and you already have DB2 licenses from IBM or IBM sales partners. In this case, your IBM license documentation is used to verify usage entitlement. You will continue to use the DB2 licenses you obtained from IBM in your SAP system.
2. You are an SAP customer with a DB2 OEM license issued by SAP. In this case, your SAP license agreement includes the right to install the DB2 OEM software from IBM together with the SAP system for which you have a license. You can obtain the DB2 OEM licenses from SAP.
If situation 2:-
Version 9 of DB2 for UNIX and Windows:
1. Go to http://service.sap.com/swcenter-3pmain
2. Choose "DB2 for Unix and Windows"
3. Choose "DB2 Version 9.1 software download"
4. Choose "Installation"
5. Choose "DB2 UDB"
6. Download the "01200615322000000718" object (License files for DB2 9 LUW)
7. Unpack the zip file using a suitable unpacking program
8. Install the license as the db2<dbsid> user by using the following commands:
              db2licm -a db2ese_c.lic
              db2licm -a db2dpf.lic
              db2licm -a db2so.lic
9. Use the following command to check whether you correctly installed the license:
              db2licm -l
              You must have installed a permanent license for the "DB2 Enterprise Server Edition" product that has the following features:
DB2 database partitioning
DB2 storage optimization
Rgds
Radhakrishna D S

How to install the orcale license .(ecc installtion )

hi friends
i have dought that how to install the oracle license once the ecc installtion is done
i heard that there is no license to be install for orcle is it right ?
regards
raja

dear friends
thanks for your support
in db2 we have instlled the db2 licensce for the data base . i have dought that for orcle also we have to do in the same way ......
regards
raja

Can anybody tell me how to install the soft phone tool in Interaction Center?

Hi,
Can anybody tell me how to install the soft phone tool in Interaction Center?
Regards
Raju

Hi Yoro,
it depends on your environment - if siemens provides some kind of SAP connector for CRM, then you can even work with deskphone. The CTI server is always responsible for communicating with both terminal and CRM server.
Example: customer calls through IVR and finally reaches operator with deskphone and CRM. The CTI server will ring the hardphone and at the same time sends signal Alerting with additional data to SAP CRM. The signal is communicated via SOAP using web service call.
The agent hear ringing from the deskphone and he can see on his CRM Interaction Center caller's number, associated name and company, which options the caller selected in IVR and so on. Now based on the CTI capability, he can click Accept in CRM and the call will picked by the deskphone, or he can reject the call, again from CRM.
In case you use siemens softphone then again, the CTI talks to both softphone and SAP CRM server. CRM simply does not care, whether the CTI channels the call to a softphone or a hardphone..
Ask your vendor for SAP connector for CRM, if there is any. Different CTI vendors supplies their connector (and usually license them separately). For instance, Genesys has Gplus adapter for SAP, Cisco offers its partner's solution from Bucher+Sutter, Solidus has also some licensed connector and so on.
What I have described is a server-server scenario. In such case, the CRM does not care where is the terminal, because the CTI takes care of it.
However, I have also seen one solution based on client-client integration. In that case, CRM Interaction Center talks to a softphone directly on operator's workstation. This is not supported by SAP and must be delivered on project basis.
Regards,
Dawood.

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

How to install Terminal License on server?

How to install Terminal License on server?

Hi Pratibha,
You can follow the link provided by Sinisa. If still any other help then kindly let us know.
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problem : Instance info corrupt in SAPMMC after installing the license

I have successfully installed the NW WAS 2004s preview edition and got the 3 month license key.
However after installing the license, when I went to SAPMMC to re-start the system, the SAP Instace information seems to be messed up.
Before installing the license, MMC was showing the SAP system as [Console Root\SAP Systems\NSP\w72c-7wpdl71 0] and now after the installation it has replaced the 7's in my systems name with #'s, so now it looks like
[Console Root\SAP Systems\NSP\w#2c-#wpdl#1 0].
SAP Management Console is completely unusable because of this. It keeps on giving 'Host not found' errors.
Fortunately, everything else with the system seems to be working fine. At least so far !!
- SLICENSE shows the new license.
- SICK does not report any problems.
So far I am forced to use the command prompt to stop and start the instace and the database. This works fine and I am able to start and stop the system.
Any ideas what could have gone wrong ?
Did it not like the '-' in my system name ?
Anything wrong in windows registery ?
Did I install the license incorrectly ?
And how to fix this ?
Any help will be greatly appriciated.
Devendra
To add more information,
- I did not restart the system, even once, before installing the license.
- After installing the system I just saw SAPMMC and checked all the nodes to see the syslog etc. and they were fine.
- I might have changed some profile parameters after installing the license.
Message was edited by: Devendra Shetye

Hi,
It worked for us too. we restarted the SAP servers from the Administrative Tools-> Services panel.
thanks a lot
Padmaja Ragavendra
PS: wanted to give you reward points but it is no tallowing me to
padmaja
Message was edited by: Padmaja Ragavendra

How to delay the license days in XI-NW2004s?

I have successfully installed the XI-NW2004s,but only used in 30days.
I think I can adjust time back to setup day to use longer. To my disappointed, there were many j2ee service failed in Visual J2EE administrator.
How to delay the license days in J2EE service ?
Can I install a temp license in Tcode "slicense" just like Minisap developer?
Thx !
points will be award !
best regard!

Hi Raymond,
You need to make sure that the date to which you are changing should be greater then the date of installation. why don't you try this
1.Use <b>SU01</b> transaction to find the date when the user was created.
2. Now change the system date to that particular date or one day greater.
Make sure all the instances of 2004's are down before changing the system date.
once done restart the system.
That should work.....
Regards
Gopi

Configuring Interactive Forms by Adobe and Installing the License

Hellom
I must install the licenses and configure the Interactive Forms by Adobe to my customer. My questions are:
- How can I see the license of Interactive Forms by Adobe on the MarketPlace ?
- How must I install this license on the customer...by ABAP ?? by Java ??
- I've already configure the Adobe Document Services. There is any additional step to do inside the system ??
- Any other important additional to be considered working with Interactive Forms by Adobe ??

Albert,
1) to my knowledge, you can't see the license in Marketplace
2) on java stack, since the ADS is a Java-Service, see http://help.sap.com/saphelp_nw70/helpdata/DE/fe/e8cc48abee49f082dfbd5b45d98dd4/frameset.htm
3) depends on what you have done so far... (see the above link for missing parts)
4) well.... it depends what you want to do
kr, achim

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

How to obtain the license for the mentioned products.

Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing "Job Scheduling Workbench".
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
Siva

Thanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva.

I just bought a new computer and want to load in photoshop from the old one. I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I can't figure out how to install the CS5 upgrade. Any advice?

How do I transfer photoshop from one computer to another? I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade. Any advice?

karen2179 wrote:
If you are able to use adobe products on two computer do I really need to deactivate or uninstall CS4?
No, but it may help the chances of a successful installation.
karen2179 wrote:
Just as an aside - I have been getting messages on here from Adobe Admin saying that CS5 cannot be reinstalled because everything is now in the cloud and that for $350 I can buy CS6 to install on my new computer. What? Am I getting spammed on Adobe's site here?
Where did you see that?

How to install the SAPRouter service on a Windows 2003 Server?

Hi, can someone please either provide me with the instructions or point me to a URL or a SAP note that describes how to install the SAPRouter service on a Windows 2003 32-bit server?
This is fairly urgent so your assistance here would be much appreciated.
Many thanks
Sharon

I tried this and I get the following error...
'ntscmgr' is not recognized as an internal or external command, operable program or batch file.
Any further suggestions?
S

How to install the license via configtool

Similar Messages

Maybe you are looking for