How to install the license of wIPS? (Version 5.2)

I have purchased one AIR-MSE-3310-K9 and 100 hundred wIPS license to support 100 monitor mode AP (AIR-WIPS-AP-100)
With the version 5.2, where can i install the license ? into MSE or into WCS?? and how can verify them?
I didn't receive any paper license with PAK. Is the PAK necessary??

3310 can have upto 2000 client licenses. 5.2 version doesn't need license to be installed.
To order license for Cisco MSE and Context-Aware and Adaptive wIPS software SKUs, visit the Cisco Ordering Tool.
http://www.cisco.com/en/US/prod/collateral/wireless/ps9733/ps9742/data_sheet_c07-473865.html

Similar Messages

How to install the license via configtool

Hi
I just install Portal 2004S and I am at the point of installing the license via the configtool.
When I am opening the configtool, it ask me if I want to use the default DB settings
I say yes and its not able to connect to the DB..
I have install Oracle 10 successfully.
any ideas??
JF

Hi
Do you know where in the keystore what to do. Is there a document with the steps that I can download?? or maybe you know the steps
the last one I did, I was on portal 6.2 and you do that threw the portal itself..
JF

How to install the db2 9.1 license

hi friend
how to install the db2 9.1 licence   in aix 5.3.
enviroment
os             : aix 5.3
data base : db2 9.1
sap componets : ecc + ep
regards
raja

Hi,
Just check out the snote 816773 which speaks about valid license to use DB2
1. You are an SAP customer and you already have DB2 licenses from IBM or IBM sales partners. In this case, your IBM license documentation is used to verify usage entitlement. You will continue to use the DB2 licenses you obtained from IBM in your SAP system.
2. You are an SAP customer with a DB2 OEM license issued by SAP. In this case, your SAP license agreement includes the right to install the DB2 OEM software from IBM together with the SAP system for which you have a license. You can obtain the DB2 OEM licenses from SAP.
If situation 2:-
Version 9 of DB2 for UNIX and Windows:
1. Go to http://service.sap.com/swcenter-3pmain
2. Choose "DB2 for Unix and Windows"
3. Choose "DB2 Version 9.1 software download"
4. Choose "Installation"
5. Choose "DB2 UDB"
6. Download the "01200615322000000718" object (License files for DB2 9 LUW)
7. Unpack the zip file using a suitable unpacking program
8. Install the license as the db2<dbsid> user by using the following commands:
              db2licm -a db2ese_c.lic
              db2licm -a db2dpf.lic
              db2licm -a db2so.lic
9. Use the following command to check whether you correctly installed the license:
              db2licm -l
              You must have installed a permanent license for the "DB2 Enterprise Server Edition" product that has the following features:
DB2 database partitioning
DB2 storage optimization
Rgds
Radhakrishna D S

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?

The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL

I installed the new 5.0 version and it keeps telling me I have to resart my computer. But it wont finish the install after it resarts. What is wrong and how do I fix it?

I installed the new 5.0 version of Firefox and the thing keeps telling me i have to resart my system to finish the install of an old version. I resart and it doesnt do anything. What is wrong and how do I fix this. I have been using firfox for more than a year now and have never had trouble till this issue came up

If the toolbar installed something into the rest of the system, you will see an entry in the Control Panel in the software uninstall applet which should be removed. You might need to make a new profile if you cannot find an extension that has something to do with the toolbar.
http://kb.mozillazine.org/Uninstalling_toolbars

How to install the orcale license .(ecc installtion )

hi friends
i have dought that how to install the oracle license once the ecc installtion is done
i heard that there is no license to be install for orcle is it right ?
regards
raja

dear friends
thanks for your support
in db2 we have instlled the db2 licensce for the data base . i have dought that for orcle also we have to do in the same way ......
regards
raja

HT6058 Hello I installed the 7.0.5 version iPhone 5c and it canceled the Hayiklod sharing photos between iPhone iPhone how can you fix it

Hello I installed the 7.0.5 version iPhone 5c and it canceled the Hayiklod sharing photos between iPhone iPhone how can you fix it

I'm guessing extremely botched translation of "iCloud", based on the phonetics.

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

How to install Terminal License on server?

How to install Terminal License on server?

Hi Pratibha,
You can follow the link provided by Sinisa. If still any other help then kindly let us know.
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

How to install the same copy of creative suite on the second computer?

Basically I am using a Macbook Pro and upgraded my hard disk. A
After I have recovered the data using time machine, I was unable to access my CS6 applications, which all became trial version. So I would like to know how to install the same copy of creative suite on the new drive.

Transferring does not usually work - you need to install using installation files, the same way you originally installed the program(s).
Download and Installation Help -
https://helpx.adobe.com/download-install.html

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

Problem : Instance info corrupt in SAPMMC after installing the license

I have successfully installed the NW WAS 2004s preview edition and got the 3 month license key.
However after installing the license, when I went to SAPMMC to re-start the system, the SAP Instace information seems to be messed up.
Before installing the license, MMC was showing the SAP system as [Console Root\SAP Systems\NSP\w72c-7wpdl71 0] and now after the installation it has replaced the 7's in my systems name with #'s, so now it looks like
[Console Root\SAP Systems\NSP\w#2c-#wpdl#1 0].
SAP Management Console is completely unusable because of this. It keeps on giving 'Host not found' errors.
Fortunately, everything else with the system seems to be working fine. At least so far !!
- SLICENSE shows the new license.
- SICK does not report any problems.
So far I am forced to use the command prompt to stop and start the instace and the database. This works fine and I am able to start and stop the system.
Any ideas what could have gone wrong ?
Did it not like the '-' in my system name ?
Anything wrong in windows registery ?
Did I install the license incorrectly ?
And how to fix this ?
Any help will be greatly appriciated.
Devendra
To add more information,
- I did not restart the system, even once, before installing the license.
- After installing the system I just saw SAPMMC and checked all the nodes to see the syslog etc. and they were fine.
- I might have changed some profile parameters after installing the license.
Message was edited by: Devendra Shetye

Hi,
It worked for us too. we restarted the SAP servers from the Administrative Tools-> Services panel.
thanks a lot
Padmaja Ragavendra
PS: wanted to give you reward points but it is no tallowing me to
padmaja
Message was edited by: Padmaja Ragavendra

I tried to install the updated 5.0 version of blackberry...

i tried to install the updated 5.0 version of blackberry messenger on my blackberry pearl and when i tried to install it it deleted blackberry messenger entirely and now i dont know how to get the version i had originally back. please help!

Hi and Welcome to the Forums!
The simplest way to install BBMessenger to your BB is to, using IE, go to this page:
http://mobileapps.blackberry.com/devicesoftware/entry.do?code=bbm
and follow the instructions.
If that does not work, then please return to these forums (http://supportforums.blackberry.com/rim/) and register an account so that we can provide you with direct assistance.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to install the license of wIPS? (Version 5.2)

Similar Messages

Maybe you are looking for