How to install/troubleshoot Esia Max-D MC400 modem on Mac OS X 10.5.8

I recently bought this modem in Indonesia. The specifications on the box says that it is compatible with Mac: OS X 10.5, 10.6, 10.7. My Macbook is on OS X 10.5.8, but when I installed the driver, I can't use it. I went back to the place I bought it, but my Indonesian is not that good and the counter staff just told me that the modem is fine, just that it can't be used on a mac and was told to buy another modem that might work.
Does anyone have any ideas on how to fix this issue before I actually I have to go and buy another modem. I just don't understand how the specifications say that it can work but it doesn't.

Hello, not sure, but after installing & restarting...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
Do you get a message... New Port Detected? If so allow it & drag that port/interface to the top of the list.

Similar Messages

  • I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

    I just purchased Wittenberger Fraktur how do install this font into my photoshop cs6 for mac ?

    You just install it in the OS.
    Photoshop gets the fonts from the OS.

  • HT3986 how to install autodesk 3ds max 2012 in my imac 27, OSX Lion ?

    i would like to know how i can install Autodesk 3ds max and Autodesk maya on my 27 inch mac ? (2012, sorry i forgot my OSX Lion version number)

    Hi Sanal,
    Maya will run natively on your Mac assuming you meet the minimum system requirements, however 3ds Max currently needs a virtualized environment such as Boot Camp, Parallels Desktop, or VMware Fusion to operate.
    Check out our Mac compatibility page for more, and let us know if you need any assistance with the installation!
    Philip
    AutodeskCare I Community Manager
    TW I PI I BLOG

  • How to install flash player 16.0 in 10.6 Mac ?

    How do you install flash player 16.0 in 10.6 Mac ? I get stuck at closing preferences.

    Hi Douglasbell2,
    Please download the Flash Player from the link below.
    http://get.adobe.com/flashplayer/
    Regards,
    Anand

  • How to install windows 7 and parallel 7 on my mac

    Hi folks,
    I Need help on how to install parallel 7 and Win 7 on my iMac running on 10.8
    Can anyone one out there help me with the steps?

    >. I tired clean install - doesn't work
    To install Windows 7 on the Win8 notebook you need to change some settings in BIOS.
    Firstly you have to disable the secure boot in BIOS.
    Secondly switch from UEFI BIOS to CSM and save the changes.
    Now you should be able to install Win 7
    But before doing this I recommend creating the Toshiba recovery medium (flash USB memory or recovery disk

  • How to install 10.7 os in imac i5 processor mac

    how to install 10.7 os in imac i5 processor mac

    If you are asking how to get Mac OS X 10.7 Lion, it must be purchased; it is not a free update. Lion may still be available if you call the online Apple Store, though a couple of recent threads have reported it as no longer available. If the Apple Store still has it, they will ask for your Apple ID and credit card number and will then send you a code which you can redeem in the Mac App Store. The installer will download to your computer and you just run that (having make a good backup of your data, of course) to install Lion.
    Regards.

  • How to install a clean copy of Lion on my mac book pro

    Since installing Lion on my Mac Book Pro June 2011 17 inch model I have had nothing but problems. I would like to wipe mt HD and start again with a completely clean copy of Lion. How do I do this ?

    Read this:
    http://www.macworld.com/article/161203/2011/07/should_you_clean_install_lion.htm l

  • HT1338 how to install hp jet 1000 printer software on my mac

    how i can i install hp jet 1000 printer software, connect it to my mac book air and get it to operate?

    If your printer were AirPrint compatible, this would explain how to do it:
    AirPrint basics
    But I believe your printer is not one of those listed in the article as AirPrint compatible.  So you'll have to visit HP's website for help.

  • How to install WD hard drive 3TB onto my new mac?

    Hi there,
    I have purchased a 3TB WD external hard drive for my new mac:
    Software OSx 10.8.2
    Processor 2.6GHz Intel Core i5
    Memory 8GB
    After the first few steps of installing it, it bugs and the last window says:
    I have tried to contact WD directly, and they are pretty much ignoring me.
    Next i have looked around their website on their forums and F&Q and it seems that there is a need for some kind of formatting of my computer to be able to read a hard drive of more than 2 TB.
    Can you help me out?

    I'm not sure how it would have copied anything from your hard drive unless you told it to; in any case, if it did, then yes, the external hard drive will be erased if you use the erase tab. You will lose the content of the external drive, but since you have not backed it up, I would not worry about that. You do not need the software the drive came with.
    The software on that external hard drive will occupy some of it; as I said, you do not need it. When I purchase a new hard drive, I immediately erase and format the drive. I usually choose the Partition tab, choose 1 or more partitions, name them, make sure they are Mac OS Extended (Journaled) and GUID partition scheme (under Options) and hit apply. At that point, I get a popup telling me that this will erase the drive and I click ok.
    After you have formatted it, you can then decide what/how you want to use for a backup.

  • HT1595 How to install a profile if i dont have a mac?

    Hi
    I hope this is a simple question.... My home wifi has a setup where on my various iphones, ipads, and windows laptops i need to manually login each time i use it.  My apple tv sees my home network, but cannot connect - says i need to install a profile. However i can only find info about how to do that which assumes i have a Mac computer. To use the configurator App. 
    How can I install a profile for my wifi using either an ipad/iphone or a windows laptop?
    Thank you!

    Hi Winston,
    The page you've referred to captures my problem exactly - I can only find documentation about installing a profile that requires the use of the Mac App Configurator.  As a mac app, as far as I am aware, it will only work on a mac computer - not on ipads, iphones or windows pc's. 
    Anyone who has any kind of further info about how to work around this, please let me know!  I've read some information about getting a "wifi bridge" to lower the security on the wifi signal, or else, achieving something similar by turning my laptop into a wifi hotspot.  But my internet router is a very basic one that was provided by my internet service as the supported device, and does not have an ethernet port.  So I believe that without the ethernet port, both of those options aren't possible with my current setup.
    Thanks!

  • How to install WD My Book World drive on Yosemite Mac

    I am a novice Mac user and need installation instructions for Western Digital My Book World (model #WD10000H1NC-00) external drive to a Mac (Yosemite 10.10.1).
    I downloaded and installed WD-Anywhere-Backup-Mac-2.5.125.zip from the WD site, but as am running the installation it asks where to backup. I have two options in the finder: shared: My Book World and My Book World-backup. Neither is accessible-- "connection failed."
    Error message I elsewhere received was: problem connecting to server "mybookworld" Server may not exist or it is unavailable. Check server name or IP address. Check network connection. try again"
    I also installed WD turbo installer which apparently installed two drivers: (WD1394_64_109HPDriver and WDUSB_64_109HPDRIVER) and WD Drive Manager.
    WD Anywhere Backup is now located on my launchpad but when I run it I get "a new version of WD Anywhere Backup is available." But the screen never advances beyond a spinning 'busy' icon to allow me to skip or download.
    I have restarted the computer several times.

    Did you download the instruction manual for installation?
    Consider posting in WD discussion forums for your particular model number.
    You can also call their tech support dept for instructions.

  • How to install Mono to run a Windows app on Mac?

    I want to run Sterling Math Facts on my Mac. They suggest trying Mono to run this... but I am not a developer, so am needing some help figuring out which install to do... on http://www.go-mono.com/mono-downloads/download.html it gives several choices: Runtime, SDK, MonoDevelop...
    Would someone be willing to help me figure out if one of these would work? Will this help me with other Windows based applications? THANK YOU!

    Just install Windows via Parallels, Fusion or VirtualBox or try CrossOver from codeweavers.com

  • How to install mountain lion for free because of new mac

    I choosed mountain lion in app store and got 19.99$ decrease of my account. My mac is among the latest group and promised of free updating. What should I do?

    Hey, I was in the same boat as you,
    go here https://uptodate.apple.com/UtdPrepareAction?program=Mountain%20Lion&locale=en_us

  • How to install an ATI Radeon HD 5700 into a Mac Pro dual 2.66?

    My Nvidea card just died on my and I've gotten an ATI Radeo HD 5700 card to replace it but I can't find any information anywhere on the installation process. Slotting it in is easy but I'm unsure where to connect the 6-pin cable. I can see a pair of likely connectors on the board marked HDD_SNS but I'm not sure which, if either, is correct. Anybody out there with info? I've tried the AMD site and just googling with no useful results.
    Thanks,
    JD

    Does the following pdf help?
    Graphics Cards with Booster Cable
    (look at page 5)

  • Pearl 9100 OS 6 Dial-Up Networking DUN (How can this be done with Telstra) Wireless Modem for Mac

    Hi
    I would like to know how i can have dial-up networking (Using my Pearl 9100 OS 6 as a wireless modem for my Macbook Pro 6.2) and also the information that has to be applied for Telstra Australia..
    Thankyou
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    Refer:
    KB19641 How to Configure a BlackBerry smartphone as a tethered modem on a Mac
    Note carefully please that this feature requires your service plan to include the capability...not all service plan levels include it, and not all carriers offer it. Further, sometimes additional software for your computer must be obtained from the carrier. But, any and all carrier-specific questions about this must be addressed to the carrier...here, we can only give you the generic information...your carrier must provide you with any specific information required.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for