How to install Windows 7 on extra Internal Disk

Apple's latest "Boot Camp Installation & Setup Guide" does not provide clear instructions to accomplish what I believe to be possible. A review of this forum for past articles provides more clues, but still leaves me wondering what are the actual steps to achieve my goal:
Install Windows 7 on my MacPro on an internal disk that is not in the first hard drive bay. I want to make the Windows disk it's own single partition, and keep my MacOS on it's own drive as it currently exists.
Here's what Apple's latest guide states:
"If you have a MacPro with more than one internal disk and you want to install Boot Camp on a disk that isn't in the first hard drive bay, remove the drives in the lower numbered bays. You can reinstall the drives after you install Boot Camp."
I have a call in to Apple Support and it was immediately bumped up to Engineering because none whom I spoke with were able to answer the question. In fact, they told me that no one had ever asked the question before!
So I would like to understand the actual steps. Could I boot from the Windows CD and choose the internal disk I want to install it? Do I need Boot Camp to load and install the Apple supplied Windows drivers?
MacPro 2.66 GHz Quad-Core Xeon, 8 GB 1066 MHz DDR3, 3 internal drives. OS X 10.9.4

The disk I want to put Windows on is named "Windows HD". Here is the diskutil list from my machine:
Macintosh:~ bob$ diskutil list
/dev/disk0
#:                      TYPE NAME                    SIZE      IDENTIFIER
0:      GUID_partition_scheme                        *160.0 GB disk0
1:                        EFI EFI                    209.7 MB disk0s1
2:                  Apple_HFS Windows HD              159.2 GB disk0s2
/dev/disk1
#:                      TYPE NAME                    SIZE      IDENTIFIER
0:      GUID_partition_scheme                        *640.1 GB disk1
1:                        EFI EFI                    209.7 MB disk1s1
2:                  Apple_HFS Macintosh HD            639.3 GB disk1s2
3:                Apple_Boot Recovery HD            650.0 MB disk1s3
/dev/disk2
#:                      TYPE NAME                    SIZE      IDENTIFIER
0:    Apple_partition_scheme                        *500.1 GB disk2
1:        Apple_partition_map                        32.3 KB    disk2s1
2:                  Apple_HFS Video HD                500.0 GB disk2s3
/dev/disk3
#:                      TYPE NAME                    SIZE      IDENTIFIER
0:      GUID_partition_scheme                        *2.0 TB    disk3
1:                        EFI EFI                    209.7 MB disk3s1
2:                  Apple_HFS Time Machine Backups    2.0 TB    disk3s2
Does this mean the Windows HD disk is already in the first hard drive bay; /dev/disk0?
My lack of clarity stems from the Apple instruction to remove my OSX boot drive. I have Windows 7 DVD install disk. Thank you for the help.

Similar Messages

How to install windows 7 without a disk

I dont know much when it comes to this stuff but I bought windows 7 online and downloaded the .iso file. When I go into bootcamp it says I need to insert the windows installer disc. How can I make the computer downlaod it from the file instead of a disc that I dont have?

We're not at the installing stage yet. Untick the bottom box on the first page (the install Windows 7 one).
Can your Mac boot from a USB, if that's what you're using?
If it came with a dvd player you'd need to use that to install Windows. First burn the iso as an image to a DVD.

How to install windows on separate internal drive?

Hello,
I've been at this problem for a few days and need some help if anyone has a clue.
I have a late 2008 macbook pro 15". I've taken out my optical drive to install a SSD so that I can run both the existing internal drive and SSD as a DIY Fusion Drive. I'm in need of Windows now and tried to partition the existing fusion drive like I would normally do to install bootcamp. This doesn't seem to work. I then unfused the fusion drive back to two separate hard drives with the OS X Yosemite on the SSD and I want to install Windows on the existing Hard Drive. I've created a bootable Windows USB through the Bootcamp Assistance, but when it comes time to install the Windows install menu does not pop up. I would get a blank black screen which then I would have to restart and boot up into my OS X. In the OS X I can see that a bootcamp drive has been created, but it doesn't show up when I hold Option during the reboot.
If anyone knows what's going one, please let me know!
Thank you!

Rather easy enough to do. People install XP and Vista all the time on 2, 3rd or 4th drive in Mac Pro. I know Vista 64-bit on Mac Pro has best support for addressing RAM and drivers.
http://discussions.apple.com/thread.jspa?threadID=1511099
http://discussions.apple.com/thread.jspa?threadID=1510044
http://forums.macrumors.com/forumdisplay.php?f=86

How to install window 7 without disk or usb

i'm not very used to using the mac os system, so I would like to install window 7 to my laptop(macbook pro)
I don't have a usb or a mac installation disk so is there any way to install it to my computer?
i have something to do (my career) that is associated with using a software and i was unable to install it because it was a mac plz help
i'm not sure what operating system it is i think this is something called lion

Hello Tckotaru,
Thanks for using Apple Support Communities.
If you want to install a Boot Camp partition on your computer in order to install Windows, then you can learn how to do this by selecting the link below.
How to install Windows using Boot Camp - Apple Support
Have a great weekend,
Alex H.

Installing windows on second internal drive

I've just started taking a course in datamatics, and therefore I need to get my hands on a windows computer for class. I currently own a 13" 2011 Ultimo MacBook Pro
I have previously changed my old HDD with a SDD, for better performance and with great results. Instead of buying a new computer as resolution, i figured i can buy second SSD and a SSD-adapter to replace my super-/disc- drive(*). Basically i thought, that I could install the new SSD, and download Windows 8.1 from Microsoft's online store, and install that on the new SSD. But i am beginning to worry, if I am going to run into any complications with the installation of Windows. If I download windows on my "old" SSD, will it not be able to install on the new one? Or is Bootcamp just gonna consider the two SSD's as one, and not have a problem transferring the installation package between the two of them?
*The SSD-adaptor included an external superdrive-casing that ultimately turn my disc drive into an USB-device. check the link:
http://www.ebay.com/itm/221251367597?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m149 7.l2648

There are a few Macs which come with a second disk (SSD/HDD). These are Mac mini and MacPro. Bootcamp Assistant understand the configuration of the Mac and possible combinations. If you replace the Optical drive and use an Optibay adapter and an SSD instead, Bootcamp assistant will not use the second SSD to install windows, because for that specific Mac model, the original configuration is a single HDD/SSD, not two.
The second issue with this configuration is due to the SSD and SATA speed differences between the Optical drive and SSDs. SATA III SSDs do not work well in the Optibay. This causes a lot of pain during Bootcamp/Windows installation.
The only solution that works is by using an SSD/HDD in the main bay (without a second drive installed. Leave the optical drive in instead, because most Macs with an Optical drive require a DVD with few exceptions as documented in Boot Camp 5.1: Frequently asked questions - the ISO question) and then moving it to the Optibay, and installing a second SSD in the main bay. Please see Unable to Install Windows 8 on secondary Hard Disk for details.
I suggest leaving the original configuration intact, install Bootcamp, and then move the disk containing Bootcamp to Optibay. Please be aware that SATA speed issues should be addressed before an SSD is bought. There are few SSDs that can work with SATA I/2/3 (Samsung 840 Pro being one, but not the EVO line, which has its own firmware challenges).
In the case of Mac mini with Fusion drives (or two HDDs), Bootcamp will only address the second drive, and will not install properly on the SSD/first HDD. The workaround to use the SSD requires buying Winclone.
In the case of MacPro, the only drive which should be in the MacPro (Generation 1) is the designated drive, all other drives should be removed prior to Windows installation. Please see Re: How to install Windows 7 on extra Internal Disk.
You can start a new thread if you want to try the Bootcamp installation in the original configuration and then move disks.

How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 4   Checksum: 03    Passed
        MBR Sector 3 Index: 5   Checksum: FD    Passed
        MBR Sector 4 Index: 6   Checksum: 58    Passed
        MBR Sector 5 Index: 7   Checksum: 96    Passed
        MBR Sector 6 Index: 8   Checksum: 7F    Passed
        Data Sector Index: 3   Checksum: F1    Passed
        Original MBR Index: 2   Checksum: BD    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
        Boot Config: 2 (Service Partition containing two Service OS's)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   239 255 255           63    301296177
1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
2   0x00   0x00      0   0   0     0   0   0            0            0
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...

Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 11 Checksum: 03    Passed
        MBR Sector 3 Index: 12 Checksum: FD    Passed
        MBR Sector 4 Index: 13 Checksum: 58    Passed
        MBR Sector 5 Index: 14 Checksum: 96    Passed
        MBR Sector 6 Index: 15 Checksum: 7F    Passed
        Data Sector Index: 10 Checksum: 01    Passed
        Original MBR Index: 9   Checksum: 12    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
        Boot Config: 0 (Service Partition containing one Service OS)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

How to install Windows 7 on a MacBook Air?

Hi everybody,
I am sorry in case this has been covered before, but i couldnt find anything searching different categgories here, so i´d appreciate some help.
I have got a late 2011 MacBook Air with lots of SSD and so on and i want to install windows 7.
I bought a wndows 7 OEM DVD (actually, two discs, one says support software)
I have tried to run bootcamp and follow the instructions, but to now end.
on my macbook air, i get the option "create a windows 7 disc" or something like that (the first option), which doesnt help me because i dont have optical drive
when i start boot camp on my iMac, this option will be greyed out.
Also, I have tried to to ISO copys of the windows DVD and save them to a USB stick but i just wouldnt come to any result.
does anybody have a good, comprehensive instruction on how to install windows 7 on an MBA withou optical drive?
Also, is 30GB OK for Win 7 if you basically dont wanna do to much in windows (no office etc, just some small clients)
thanks!

30GB is not enough, especially on an SSD. Normally 50-60GB and with SSD I'd go with 80-90GB.
http://www.apple.com/support/bootcamp faq, how to, special instructions for Air
There is a program to create DVD from ISO or .exe
Apple Boot CAmp Assistant should have prompted to save a driver for you to support a USB-DVD, in addition to the normal Apple B.C. drivers you save to flash card.
Disk Utility is not a good method for burning Windows DVDs.
http://simplyburns.en.softonic.com/mac
https://discussions.apple.com/thread/3241150

How to install Windows on MAC? (Can't see the check box "Install or remove Windows 7 or later version" on Boot Camp Assistant)

I want to install Windows 7 on my MBP mid 2012 but in Boot Camp does not appear the check box: "Install or remove Windows 7 or later version". I continued with making the USB bootable with Windows 7 but then when I restart and boot with the USB I still can't install Windows because then I receive an error: ""Windows cannot be installed on this disk. The selected disk is of GPT partition style."
From OS with Boot Camp I didn't manage to make a partition for Windows instead I made one with Disk Utility (formated FAT).
After booting from USB that partition was also formated into NTFS necessary for Windows. Still the same error.
Any idea how to install Windows on my MAC?

My Windows copy is a X64.
MBP mid 2012 with Mountain Lion 10.8.3.
Model Identifier:          MacBookPro9,2
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Boot ROM Version:          MBP91.00D3.B08
SMC Version (system):          2.2f41
Should have:
MacBook Pro (13-inch, Mid 2012)
MacBookPro9,2
MBP91.00D3.B08 (EFI 2.9)
If you are refering to this I tried to update the EFI version (I see only SMC version 2.9 as a diferrence of what I have) but on installing I received an error: "This software is not supported on your system."

How to install Windows on a SATA boot drive

Here is how to install Windows XP on a SATA boot drive. This procedure was first developed by syar2003 and has been used by many iusers ncluding myself. Although it was originally developed for Neo2 mb's and Windows XP Pro, it has general applicability to systems as well.
1. Have only the SATA drive you want to be the boot drive active in your system. Disconnect the power to all other HDD's if any.
2. Have only one optical drive active. Disconnect the power to the other opticals if any. (Best to have a burner optical as master on IDE1.)
3. Plug SATA drive into SATA 1 on the mb. (it may show us as an IDE drive somewhere down the list in BIOS. That's okl)
4. Enable appropriate SATA options in BIOS. Set boot order to floppy, cd, SATA drive. Set boot priority to SATA drive.
5. Partition and format the SATA HDD using the utilites CD that came with the SATA drive. (If you don't have an HDD utilities disk, download one from the website of your HDD manufacturer.)
6. Run Windows setup. No need to load drivers at the F6 promt unless you are planning to do a RAID configuration.
7. Windows XP should install without incident.
8. After you are up and running, plug the power back into your other HDD and optical drives if any.
If you have a board older than the K8 series, it may be necessary to load the SATA drivers at the F6 prompt. If the above procedure does not work, than try it again loading the SATA drivers.
If this procedure does not work for you, it is likely that your particular SATA HDD has some compatablity problem with Windows setup and/or your motherboard. The solution to this is to try another SATA drive. In general, most failures using this procedure have been traced to certain WD, Seagate and Hitachi SATA drivers of smaller capacities. Fewer problems seem to have occured with Maxtor HDD's.

Kaplan, from an earlier post of mine regarding sata2 hdds - I have them plugged into the sata1&2 ports, installed the nvidia raid first and then installed winxp (in both raid 0 and raid 1). My bios is 3.1 and its a known problem that bios 3.3 & 3.4 have nvidia raid problems but seems to be fixed in the beta bios 3.53:
I just purchased 2 hitachi deskstar sata2 80gb hdds ($60 each at zzf) and the interesting thing about them is that you have to "enable" sata2. I have been testing the performance of sata1, sata2, raid1 and raid0 and the results are below.
The drives themselves are factory default set at sata1. Since I purchased OEM, no software or instructions were included. I had to go to the hitachi website download section to download a dos based program (the features program) to enable sata2. After enabling the hdds to sata2, they were recognized in winxp in the nforce ADMA controller device driver and the screen reads with the primary channel as Serial ATA Generation 2 - 3G...and all 4 boxes below it are checked (the boxes enable bios select xfer mode, enable read caching, enable write caching and enable command queuing are checked). An interesting thing about the sata2 spec is that all sata2 hdds must come standard with NCQ...its not advertised on these 80 gb hdds on the hitachi website (unlike the larger hitachi sata2 hdds) but its a standard sata2 spec and these 80gb hitachi hdds are recoginized in winxp as sata2.
The other interesting feature about the hitachi sata2 hdds is setting them up to operate in an adjustable "performance" to "silence" mode. The hdds are default set at high perfromance but you can manually lower the performance to increase the silence of the hdds which is fully adjustable to your liking. I tested the highest silence/lowest performance setting and you cannot hear the hard drive at all.
Testing - I tested the 2 hitachi sata2 deskstars with the first result in sata1 mode, the second in sata2 mode, the third in raid1 mode and the fourth in raid0 mode.
First, a significant increase in raid0 over sata1, sata2 and raid1 with sequential reads and writes (PC Wizard).
Write: 28mb/s vs 29mb/s vs 27mb/s vs 53mb/s
Read: 45mb/s vs 46mb/s vs 43mb/s vs 83mb/s
Second, significant increase in sata 2, raid 1 & raid 0 over sata1 with buffered reads and writes (PC Wizard).
Write: 104mb/s vs 176mb/s vs 165mb/s vs 266mb/s
Read: 123mb/s vs 200mb/s vs 200mb/s vs 293mb/s
Third, significant increase in sata 2, raid 1 & raid 0 over sata1 with burst reads (HD Tach).
Burst Read: 133mb/s vs 225mb/s vs 219mb/s vs 334 mb/s
It is interesting to note that raid1 is better than sata1 but marginally slower in all tests over sata2. Raid0 is significantly faster on all tests.

I have Lion on an external hard-drive and I want to install it on the internal disk

I have Lion on an external hard-drive and I want to install it on the internal disk. How can I proceed?

I recently completed a clean install of Lion on an internal SSD. After wiping it clean, I used a thumb drive with SL on it to boot and then another thumb drive with Lion on it. It worked just fine. The only thing to be aware of is that if you use the thumb to install Lion from... it will not install a recovery partition and you'll have to use the thumb in the future.
That's what I wanted anyway so it's working out just fine. Good luck.
I should add... I used the SL thumb to actually boot from and used Disk Utlities to wipe the internal SSD. It does work and there are Apple posts that can guide you through the thumb drive process. I used copycat to create both the SL boot and Lion.

How to install Windows 8 on a blank HardDrive

So hi again guys! I was wondering how to install windows 8 on a blank hardrive...
Many of you will say just use bootcamp... I can't... I don't have enough space for windows 8...
So I decided I will install it on a blank HardDrive...
Can anyone give me How to guides? Please
I need windows 8 because I want to play Windows based games (Smite, 8bit MMO and many more)
Thanks in advance guys...

Why don't you ask on a Windows forum about how to install Windows on an external drive? I think Windows 8 has a Windows to Go version. Boot Camp does not support installing Windows on an external drive. You could do this using a virtual machine like Parallels, Fusion, or VirtualBox.
But running Windows from an external drive will be extremely slow compared to an internal installation. I doubt you'll be happy with game performance.

How to install Windows 8.1 with Windows 8 Product key?

I have purchased Upgrade pack from Windows 7 to Windows 8. I have also Updated the OS to windows 8.1 through Store. How to install Windows 8.1 with Windows 8 Product key?

The download link for the Windows 8.1 installer at the Upgrade with Product Key Only does not accept a Windows 8.0 product key. I ended up using the trick suggested by Andre Ziegler in this thread to obtain the 8.1 download independent of the Windows
Store, but I haven't yet checked if the 8.0 key works from 8.1 Setup.
I do IT for a living but I have plenty of family members that bring their notebook PCs to me and ask me to do the heavy lifting, and I'd rather not re-download the same 3.6 GB every single time someone tells me to fix their PC. I also want to be able to
re-install 8.1 from the source media in case of a catastrophic hard disk failure and I have to replace the disk.
As an aside, tools that retrieve product keys for installed products end up retrieving the 8.0 product key from an 8.1 install that was upgraded via the Store. It kind-of makes sense that an 8.0 key could work to install 8.1 because 8.1 is supposed
to be a free upgrade for licensed 8.0 users, but this doesn't seem to work until after 8.1 is successfully installed via some trickery and the user supplies the 8.0 key to activate it.

How to install windows 8 drvier

how to install windows 8 drvier

Transfer win 8 from inside hd to external hd.
Cloning Win 8 is also OK.
Aomei Backupper can do the above.
In additional, Do you know Windows to Go?
http://www.disk-partition.com/features/windows-to-go-creator.html

How to install windows 8 onto an external hard drive connected with usb 2.0?

How to install windows 8 onto an external hard drive connected with usb 2.0?

Transfer win 8 from inside hd to external hd.
Cloning Win 8 is also OK.
Aomei Backupper can do the above.
In additional, Do you know Windows to Go?
http://www.disk-partition.com/features/windows-to-go-creator.html

How to install windows 7 over windows 8 HP 2000- 2b16NR

So, I purchased this laptop at a pawn shop a couple of years ago, and it has served me pretty well up until now. After the latest windows update, something went terribly, terribly, wrong. For some unknown reason I am now stuck with Windows 8.1 Evaluation with the license expired, which means it shuts itself down EVERY hour. I'm done with this, I hate the Windows 8 interface anyway, now its time to go back to something I know and love. I've read up on a lot of these posts, and joined the forums only because I did not see another post that was in direct relation to my own model number. If someone could please guide me through the process of installing Windows 7 from a disk, it would be ever so helpful. If you could also post a link pointing me in the right direction for all the drivers specific to my computer, that would be awesome as well, since I'm no techie, and really don't know a whole lot about this sort of thing outside of basic knowledge. Thanks in advance for the help!

I got my hands on a bootable copy of Windows 7. Everything loads up just fine until I make the settings to US English etc, and click install, when I do that I get this error message: "The product key does not match any of the Windows images availible for installation. Enter a different product key." Which doesn't make any sense to me, because since I've had this computer everything has updated just fine, and worked great up until this stupid update to 8.1. That being said, when I go into other options and select 'Reset my PC' I get another error message: "Unable to reset your PC. A required driver partition is missing." I've seen on some other posts where having the drive partitioned in the right way (format I guess?) is another issue with installing Windows 7 over 8. If this indeed another source of the problem, how do I go about fixing it?

How to install Windows on W2100z...help needed

hello
Can anyone plz tell me about how to install windows on W2100z.I tried in lot of ways but to no avail.First of all i tried win xp 32 and 64 bit cds but no success.Then i created the winxp 64 cd by runing the xp_reburn script from supplement cd 2.4 but same problem of "Setup didnot find any harddrives attached to your system" appears.Then i attached a floppy drive and tried floppy disk containing drivers of Scsi from supplement cd and after pressing F6 i provided the floppy,it shows the menu containing four driver names ,i tried each one of them but same old problem comes later in the setup.
Can anyone help me in this regard ?
thanks

it comes without OS [OS less]
see here for guides how you can install OS[Win8/Win7] in UEFI mode from USB key:
http://www.nextofwindows.com/how-to-make-uefi-bootable-usb-flash-drive-to-install-windows-8/
Code: [Select]
https://www.youtube.com/watch?v=tSmeugjS7XM

How to install Windows 7 on extra Internal Disk

Similar Messages

Maybe you are looking for