Image in JAR not found/used

I have a gif image that is called by a JLabel:
JPanel cp = new JPanel(new GridLayout(0,2));
cp.add(new JLabel(new ImageIcon("test.gif")));I produced a jar by using this command: "jar cvfm MyApp.jar manifest.txt *.class test.gif"
The jar is correctly created and the image is show if the jar is run in a directory that contains "test.gif". If the gif isn't in the same directory, the image won't show. What am I doing wrong?
Thanx in advance! :)

hehehe test.gif is the root of the jar ?
instead of
new ImageIcon("test.gif"))
you should call the resource that way witch work even if file isnt in a jar
the clean UNIX & WINDOWS way aka javaway :) :
// if you want the "BlueSkin.png" that is in  "Skins" dir
image1 = (new ImageIcon(this.getClass().getResource(
                            "/" + "Skins" +
                            "/" +
                            "BlueSkin.png"))).getImage();plz check out my chess app that use that way and has all the resources files in

Similar Messages

  • HP Officejet Pro 8500 A909G – The HP Imaging Device was not found

    I have a HP Officejet Pro 8500 Wireless A909G.  My operating system is Windows 7 Home Premium 64bit that was upgraded from the original Windows Vista 64bit that came installed on my HP Pavilion Elite m9400t CTO Desktop PC.
    After performing the Windows 7 upgrade I installed OJP8500vA909_Full_13 to support the 8500, and everything worked fine.
    I recently noticed that the scanner function had stopped working from Solution Center, and uninstalled V13.  I downloaded and installed OJP8500vA909_Full_14.  The install completes without error, but then I get scanner error “The HP imaging device was not found”  with extended error code 8, [(1,0, -2147221164)].
    I have performed all the suggested Solution Center steps to resolve the error without success. Including:
    1) Updated the firmware to OfficejetPro8500A909g_R1006B_ENG
    2) Ran OJP8500vA909_Corporate_Scrubber_14
    3) Uninstalled all programs, deleted %temp% files, and changed the startup using MSCONFIG.
    4) Deleted all other imaging programs including camera software, and reinstalled.
    5) Performed HP Update and installed network fix.
    I have performed these steps many times and keep getting the same error.   The scanner works using the front panel function “Scan to network folder.
    Please help.
    This question was solved.
    View Solution.

    First of all, i am sorry to hear your having a problem with your Scanning Feature on your PC. How is the computer and printer connected together?
    Please download and run the following tool. This is what we call the HP Scan Diagnostic Utility.  After downloading and running the tool, can i have you reply with the problems (if any) it finds.  Thanks so much!
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-96509-1&cc=us&dlc=en&lc=en&...=
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an HP Employee.

  • Adobe Acrobat Distiller Process. Issue with Font(L0420P not found, using courier)

    Hi Everybody,
    We are working for upgrade activities, which involves moving applications from Windows 2000 to Windows 2003 Servers.
    My applications uses Adobe Acrobat distiller, which is also getting upgraded along with the server from Adobe 4.0 to 5.0 (Installed licensed Adobe distiller).
    I have been using Adobe distiller to convert .PS files into .PDF files. The conversion process requires the PSFonts such as (MB006, L0B, L0420P etc..), each font got a separate PFB and PFM extension files, which are kept in the folder name called "Psfonts" and has been included in "Font location" under Distiller settings.
    Using Distiller( Adobe Acrobat distiller 4.0 ) in Windows 2000 didn't create any issues or error while converting .PS files into .PDF files, all the PDF files are generated by Distiller as expected and process without any Font issues.
    In Windows Server 2003, I installed Adobe Acrobat distiller 5.0 and moved the Font Folder "Psfonts" from older server(Windows 2000 server) to the new server(Windows 2003) and started Adobe Acrobat distiller process(5.0) to convert .PS to .PDF, most of the .PS files gets converted into .PDF files but when .PS files which require the Font L0420P comes in for Distilling, it displays an error message as "L0420P not found, using courier".
    I checked with the old Server's (Windows 2000) font folder (Psfonts), it has the same files(PFB and PFM) as present in the new Server(Windows 2003).
    I tried to check the Particular Font name(L0420P) in Distiller-->Setting-->Job options-->Font-->Embedding-->Psfonts, but L0420P font alone is missing in the List.
    Could you please help in resolving this Font issue.

    You may like to try deleting the PsFonts entry from distiller and closing it. Restart the machine, make the entry of PSFonts agina and try creating PDF.

  • ../../Products.jar not found while installing Oracle 9i

    Hello,
    I am installing Oracle 9i on RHEL4 on a 32bit machine.
    Hardware is HP ProLiant DL380 G5
    All the RPM's, jre is in place.
    After i run ./runInstaller the Oracle Universal installer gets evoked and in the File Locations option in the "SOURCE" area presently the path where it is mentioned "Enter the full path of the file representing the product(s) you want to install" is is automatically set to
    /tmp/oracle/Disk1/install/linux/../../stage/products.jar
    But when i click next to proceed futher, i get an error..
    file /tmp/oracle/Disk1/install/linux/../../stage/products.jar not found
    Having a look on google.. i get solutions relating to 11i. But this is Oracle database.
    Please help.

    make sure the products.jar file is located where declared.
    ~ Madrid
    http://hrivera99.blogspot.com

  • Discussion Forum: Unable to perform the operation: Row was not found using

    Hi all,
    I deployed the Discussion Forum and it shows the Portlet with "Creating a product ..". Very fine.
    I can create a Product. Fine also.
    I can fill in a new Thread, but then, when I try to submit it, I get the error:
    Unable to perform the operation: Row was not found using request parameter: 000100000004313437380000012A000000F8FE832E94.
    When I click Cancel. I see the Overview of the Products. I drill down to the Threads for my Product and the new thread appears on the list. As soon as I click on the Thread in order to read it the following error appears:
    Unable to perform the operation: Row was not found using request parameter: 0001000000043134373800000134000000F8FE832E94.
    Any help is appreciated,
    Michael

    You need to set the Login Frequency (while registering the provider) to 'Once Per Session'. This will allow the portlet to track the user transaction state.
    Make sure that you do not bounce the oc4j container in between the portlet operations, since this will leave the transaction into inconsistent state.
    You have to ensure that whenever you bounce the oc4j container/provider mid-tier you logout of portal and login again.
    This will solve the problem.

  • Error code 907 invalid jar not found

    For those of you that are having trouble with error code 907 invalid jar not found or invalid jad not found. After following all the help available on the Blackberry site to no avail, the cause of the above error codes was a web site down problem. It turns out that when you try to download the blooover.jar or the blooover.jad files to your phone you get the error message 907 invalid jar or jad file not found due to the www.bluejack.ru web site being down. Any other .jar or .jad file that I tried was not a problem.

    Good!
    Still, glad you got it settled. There are even several knowledge base articles here on that exact error code as well as the many posts in the forum explaining what it is.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • What's the best way to merge, restore or reconstruct iPhoto and Aperture libraries to resolve images that are not found/offline?

    Hey there, Apple Support Communities.
    To start, I'm working on a MBP Retina 15" with a 2.3GHz i7 processor and 16 GB of RAM.  10GB free on a 256GB SS HD.  Attached are two external HDs - one 1TB Western Digital portable drive from 2011, one 2TB Porsche LaCie non-portable drive from 2013; both connected via USB.  All photo libraries in question are on the external drives.
    I have Aperture 3.5.1 and iPhoto 9.5.1.  I prefer to work in Aperture.
    The Issue(s)
    Over the years, I have accumulated a number of iPhoto libraries and Aperture libraries.  At one point, I thought my WD drive was dying so I purchased the LaCie and copied all libraries over the the LaCie drive.  (Turns out, there's probably an issue with my USB port reading drives, because I can once again see the WD drive and occasionally I can't see the LaCie drive.)
    So now I have old version of some libraries on the WD drive, and new versions on the LaCie drive.
    When I was moving things, I ran the software Gemini to de-dupe my iPhoto libraries.  Not sure what effect that may have had on my issues.
    In my main Aperture library and in some iPhoto libraries, I get the image-not-found badge or exclamation point.  I've dug through the hidden Masters folders in various libraries to find the original image.  In some cases, I have been able to find the original image, sometimes in a different version of the iPhoto library.
    My Question(s)
    1.  For Aperture libraries that have missing originals, is there some magical way to find them, or have they just disappeared into the oblivion?
    2.  For iPhoto libraries that have missing originals and I have found the original in another iPhoto library, what is the best way to proceed?
    3.  Are there quirks to merging iPhoto and Aperture libraries (by using the Import->Library) feature that I should be aware of?
    TL;DR: Too many iPhoto and Aperture libraries, and not all the original pictures can be found by the libraries anymore, though some originals still do exist in other libraries.  Steps/process to fix?
    Thank you!  Let me know if you need add'l info to offer advice.
    With appreciation,
    Christie

    That will not be an easy task, Christie.
    I am afraid, your cleaning session with Gemini may have actually removed originals. I have never used this duplicate finder tool, but other posters here reported problems. Gemini seems to replace duplicate original files in photo libraries by links, and this way, deleting images can cause the references for other images to break. And Aperture does not follow symbolic links - at least, I could never get it to find original files this way, when I experimented with this.
    1.  For Aperture libraries that have missing originals, is there some magical way to find them, or have they just disappeared into the oblivion?
    You have to find the originals yourself. If you can find them or restore them from a backup, Aperture can reconnect them. The reconnect panel can show you, where the originals are supposed to be, so youcan see the filename and make a Spotlight search.
    For iPhoto libraries that have missing originals and I have found the original in another iPhoto library, what is the best way to proceed?
    Make a copy of the missing original you found in a folder outside the iPhoto library. You can either open the iPhoto library in Aperture and use "File > Locate Referenced file" to reconnect the originals, or simply reimport them. Then Lift&Stamp all adjustments and metadata to the reimported version.
    See this manual page on how to reconnect originals:  Aperture 3 User Manual: Working with Referenced Images  (the paragraph:  Reconnecting Missing or Offline Referenced Images)
    Are there quirks to merging iPhoto and Aperture libraries (by using the Import->Library) feature that I should be aware of?
    References images will stay referenced, managed will remain managed. You need to unhide all hidden photos in iPhoto - this cannot be done in Aperture.
    and not all the original pictures can be found by the libraries anymore, though some originals still do exist in other libraries.  Steps/process to fix?
    That is probably due to Gemini's replacing duplicate originals by links, and your best cause of action is to fix this before merging the libraries. Reconnecting can be done for your iPhoto libraries in Aperture.

  • Uploading file to online classroom dropbox, file is not found using Firefox 7.0 but I am able to upload using IE9

    I just upgraded my Firefox version to 7.0 and I am currently attending online courses through Kaplan University. I was attempting to upload a .ppt file to the classroom drop-box and it was not recognizing the file as being there while using Firefox 7.0. I opened IE9 and was able to upload the .ppt file without a problem, so this is leading me to believe that there is an issue with Firefox 7.0. I have never had this issue using past versions of Firefox and this is the first time that it has happened.

    Thank you for your prompt email.
    I have thoroughly checked and double-checked all the factors below.
    On two different computers. Unfortunately, nothing has helped yet.
    I can assure you that each item listed below has been checked several times during all my searching today and ALSO again right now.
    There are no problems with Plugins, Themes or Extensions found. No permissions blocked, No media blocked images, No third-party permissions blocked. No images blocked from any domains. And images are 'Enabled'. There are no exceptions in place to the loading images. No exclusions in my security software settings.
    AND I have checked all of this on a second computer that is also having this same problem. That person is using a different security software than I am but they are having the same problem with images in only their Gmail account also - but NOT when using IE9. Only when signing in through Firefox. And we both think it started yesterday or this morning.
    That pc is still on Firefox version 12.0. I updated earlier today to version 13.0 but the problem is still ongoing for both of us.
    Any further help will be greatly appreciated.
    I have to get something accomplished. WAY behind now.
    Thank you,
    ElaineB.

  • Image offline or not found problem

    I've been traveling a lot so I decided to move my entire Aperture Library to a firewire 800 drive thinking that I would be able to work from my laptop or desktop and have the exact same library without problems. It seemed to work fine until I plugged back into the desktop and now the images that have been imported and edited on the laptop show up but are not accessible with AP giving me this warning "The selected master image is either offline or not found. Please reconnect it and try again." I can't navigate using the manager because it can't/won't see the Aperture Library file.
    I tried exporting the project on my laptop then re-importing the project back on my desktop with same results. The files are in the external drive but it seems like its looking for the original computer from which it was installed...
    What do I do to fix this?

    Are you using Ap2 or 3 ?
    Are your images in the Aperture library on your desktop because Aperture cant 'see' them, have you dropped them say in your documents folder in error ? If you have, Aperture cant access them as it uses the pictures folder in your home folder by default.
    You may have selected upon import to store files somewhere else other than the default pictures folder.. Use the finder to search for your Aperture Library.aplibrary.
    In Ap3 it should be a simple export import operation. If Ap3..? did you export as a 'Project as new library'... or try to export by drag and drop...? Or export individual projects ?
    Ap3 supports merging everything you did on your laptop as a new library where it gathers everything you did, adjustments, metadata, keywords etc....
    Regards....... Gerry..

  • Site not found using Sharepoint Designer 2013, Load balance URL and the Front end servers.

    Dears,
    My SharePoint farm is with the below configuration in our office :
    Batch processing server the with Central Administration
    Web Front End Sever 1 (http://wfe01)
    Web Front End Sever 2 (http://wfe02)
    I do have the load balance URL as http://finance.mycompany.com and as per the system administrator it seems configured properly.
    In AAM i have mapped the URLs as below for the web application in Central Administration portal:
    http://finance.mycompany.com - Default Zone
    http://wfe01 - Intranet Zone
    http://wfe02 - Internet Zone
    I was able to browse the site via the load balance URL : http://finance.mycompany.com, but couldn't open the site using the Share Point Designer 2013. It always says the site not found.
    please advise,
    thanks,
    Ammar

    What do the wfe01 and wfe02 aams do?
    Are you browsing to the SharePoint site and using SPD on the same computer, is it part of the farm or a seperate client computer?
    thanks Alex a lot for your response and appreciate the same.
    WFE01, WFE01 is connected to the one central admin on Batch Processing Server (central admin URL is http://SharepointCA:5555 and the SharePoint Web Application is hosted under port 80 on the same server). So the AAM configured on the batch processing server
    central admin.
    I can connect to the site using the SPD inside the Batch Processing server if i mention the site urs as http://localhost. But not from other client computers by putting the load balance URL - http://finance.mycompany.com.
    I can browse the sites directly putting http://wfe01, http://wfe02 and as well as the load balance URL (http://finance.mycompany.com). The custom webparts are getting crashed when i put the web application URL as http://finance.mycompany.com.
    thanks,
    Ammar

  • Migration monitor (migmon.jar) not found when installing Solman 4.0

    Hi again all,
    I am doing the installation of the database instance for Solution Manager 4.0 and at the Import ABAP step, it ends with the following error:
    WARNING 2007-09-20 17:22:32
    Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath migmon.jar
    -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs /u02
    /sap/EXP1:/u02/sap/EXP2:/u02/sap/EXP3:/u02/sap/EXP4 -installDir /tmp/sapinst_ins
    tdir/SOLMAN/SYSTEM/ORA/DISTRIBUTED/AS/DB -orderBy "" -r3loadExe /usr/sap/SMD/SYS
    /exe/run/R3load -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorT
    imeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return
    code 1. Output:
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
    IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142ifx-200703
    28 (JIT enabled)
    J9VM - 20070327_1654_LHdSMr
    JIT  - r7_level20061020_1803ifx1)
    The java class is not found:  com.sap.inst.migmon.imp.ImportMonitor
    The migmon.jar file is not present anywhere on the server.  It appears that this is needed for doing system copies but why is it looking for it here since this is just a fresh installation and not a system copy?  And more importantly, how do I resolve this?
    Steve

    Read the first sentence of my first reply to your question
    The tool to import data is called "Migration Monitor" because it was initially developed assisting on migrations of systems. Since the process itself is the same (R3load export/import), it was integrated in the installer. Don't let the name confuse you.
    Markus

  • Jaxm-client.jar NOT Found

    I'm currently doin some research and I downloaded the newest Summer Pack. But when I ran a sample program it says,
    javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.soap.MessageFactoryImpl not found
    I went into the java forums it says to put the provider.jar and the jaxm-client.jar in the Path. I found the provider.jar in a WAR file, But was simply unable to find the jaxm-client.jar!! If you can please clarify this I'd be extremely grateful.
    Thanking in advance,
    Sumudu

    use recent samples: jaxm-client.jar is now replaced by saaj-ri.jar
    the default implementation of the message factory is now com.sun.xml.messaging.soap.saaj.MessageFactoryImpl, and no longer com.sun.xml.messaging.soap.MessageFactoryImpl !

  • Tomcat error:" It is not available the ServletAction"  and jars not found

    Hi,
    I am deploying an application using Ant from MyEclipse IDE.
    When I deploy the application with the Ant, it says to me that the application has successfully deployed. I go to webaapps directory and I can see into that it how the application has been deployed with its WAR.
    But when I try to excute the application, Tomcat gives me the following error:
    Message: It is not available the Servlet Action
    Description: The request resource (It doesn`t available the ServletAction) is not available.
    If I go to Apache Tomcat`s stdout log I can see two warnings:
    WARN: No appends could be found for logger (org.apache.commons.beanutils.Convertutils)
    WARN: Please initialize the log4j system properly
    But, If I go to the Java Build path of the application I can verify how I have added the commons.beanutils.jar and log4j.jar .
    I don`t know why it doesn´t run and I am stuck.
    I would be very grateful somebody could help me to solve this problem.
    Regards

    The logging doesn't need to be set up properly for the web app to function, usually. The more critical point is the error message from Tomcat about the Servlet Action. Is that the exact error message? I'm just asking because I've never seen a Tomcat error written like that. Could you post the exact message.. Are you using Struts? And where are you seeing the Tomcat error message? Is it appearing in the console or in one of the logs or in the browser?
    My guess is you have a jar missing from your classpath but I can't tell from what you've posted.

  • Javax.crypto classes not found using JDK1.4

    We're trying to upgrade to using JDK 1.4, in which the Java Cryptography Extensions are incorporated into the JDK. However, iPlanet does not seem to be able to find the classes that make up the extension.
    If I write a simple Java app that creates a java.crypto.SecretKey, and run it from the command line on our web server machine using our Java 1.4 JDK, it runs fine.
    If I adapt the same program into a simple servlet and run it from within iPlanet, it fails with a ClassNotFound error trying to find javax/crypto/NoSuchPaddingException.
    I've done a lot of variations trying to hone in on the problem, but I'm running out of options. Does anyone have any information or experience with this particular problem?
    We're running iPlanet 6.0 SP5 and the JDK is build 1.4.1-b21.

    David,
    I'm also facing the same problem, none of the javax.crypto classes are found.When I'm running the Encryption code it's working standlone and in Tomcat 4.0 but in IPlanet it's giving me ClassNotFound.
    I have added jce.jar in the classpath as mentioned and it's getting picked.
    But you have mentioned some start-jvm files, I'm not able to find these files.
    Can u please summarize what all settings you did?.
    As it's urgent if possible mail me at,
    [email protected] (OR)
    [email protected]
    Sachin

  • \install_fg.jar not found during installation of Developer Suite - urgent!!

    I am now installing full developer suite 101202 on Windows machine - DB and SOA suite is up and running already. Well - now I am at screen 'Thank you for choosing Oracle' with Setting up 'Oracle Developer SUite 10g OC4J Instance 10.1.2.0.2'. So - for more than 30 minutes the wizard show the same 94 on progress bar, if I look on installation logs - then they are modified some 25 minutes ago and there is 2 error logs:
    ...out file contains:
    OiilNativeException is thrown
    path: C:\Users\Admin\AppData\Local\Temp\OraInstall2007-10-04_08-52-18PM\jre\1.4.2\bin;.;C:\Windows\system32;C:\Windows;C:\product\10.1.3.1\OracleAS_5\jdk\bin;C:\product\10.1.3.1\OracleAS_5\ant\bin;C:\product\10.1.3.1\OracleAS_5\bin;C:\product\10.1.3.1\OracleAS_3\jdk\bin;C:\product\10.1.3.1\OracleAS_3\ant\bin;C:\product\10.1.3.1\OracleAS_3\bin;C:\oracle\product\10.2.0\db\jlib;C:\oracle\product\10.2.0\db\bin;C:\product\10.1.3.1\OracleAS_4\jdk\bin;C:\product\10.1.3.1\OracleAS_4\ant\bin;C:\oracle\product\10.2.0\db_1\bin;C:\product\10.1.3.1\OracleAS_1\jdk\bin;C:\product\10.1.3.1\OracleAS_1\ant\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;c:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;c:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;c:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;c:\Program Files (x86)\Common Files\Roxio Shared\9.0\DLLShared\;C:\Program Files (x86)\Hewlett-Packard\IAM\bin;C:\product\10.1.3.1\OracleAS_1\MOBILE\sdk\bin;C:\product\10.1.3.1\OracleAS_4\MOBILE\sdk\bin
    toload is C:\Users\Admin\AppData\Local\Temp\OraInstall2007-10-04_08-52-18PM\WindowsGPortQueries.dll
    OiilNativeException is thrown
    toLoad is C:\Users\Admin\AppData\Local\Temp\OraInstall2007-10-04_08-52-18PM\ocxReg.dll
    and ... err file contains:
    java.io.FileNotFoundException: C:\Orcl\ds_windows_x86_101202_disk2\stage\Patches\oracle.options.ano.ssl.owm\10.1.0.4.2\1\DataFiles\install_fg.jar (The system cannot find the file specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
         at oracle.sysman.oii.oiio.oiiof.OiiofFileLoader.fetchDefaultJarToLocal(OiiofFileLoader.java:671)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:120)
         at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:338)
    java.io.FileNotFoundException: C:\Orcl\ds_windows_x86_101202_disk2\stage\Patches\oracle.options.ano.ssl.owm\10.1.0.4.2\1\DataFiles\install_fg.jar (The system cannot find the file specified)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(Unknown Source)
         at java.io.FileInputStream.<init>(Unknown Source)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:150)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:123)
         at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:338)
    So - what should I do? Installer cann't find file - but it should be there - because the copy-files section of installation wizard was successful... So - if I restart the installation - I cann't see what can be different??? It seems to me that I cann't do nothing now? Is there any solution for this?
    Well - I have remained some 6% of setting up and full configuration wizard... How can I complete this??

    I have found thread:
    http://forums.oracle.com/forums/message.jspa?messageID=2118383#2118383
    which is exactly for me - so - can one make some preconfiguration steps? It seems strange, that one should check file by file the installation already prepared and tested by Oracle? I am not sure is this the right practice in production environment... well - and I am not sure if it works at all - it can take much time without result...

Maybe you are looking for