How to integration the third-party forums in Portal?

Hello everyone,
I want to integration an third-party forums into Portal.
How to do it ?
Is there anyone had done that?
Thanks & Regards,
Jianguo Chen

Hello Holger,
Thank you for your response.
I am familiar with URL-iview,
and it should be ok integration forum as an iview.
But the third-party forum has its own user management system.
I means that the third-party forums need register and logon, then users can enter it.
We want carry out that integration the user management of Portal and the third-party forum,
the user of Portal and the third-party is consistent,
Portal UME can full control the third-party forums's user.
Is this issue possible?
And I am agree with your opinion that we need some develop for UI integration.
Regards,
Jianguo Chen

Similar Messages

How to map the Third Party materila for Job Wok process in our Plant

Dear All,
please guide me how to map the Third Party Subcontracting in Our Plant Means Customer materials to be Processed in our Plant and then we have to sent to customer after processing.
please Brief me with the Proces sflow
Reagrds
kishore Edagali

1) create a 2 material as non valuated (one incoming material "A1"& after processed material"B1")
2) create a BOM. for A1
& assign the B1 and maintain respective conversion
3) create a routing for A1 and assign the relevant work center
4) create a manual PO to receive the material from customer and store it in storage location
5) create a production order and release the order in co01
6)issue the material :B1 to the order 9 in MB1a, 261 movement)
7) and confirm the order (so that cost incurred for order is captured)
8) create a sale order and maintain service price in PR00 and send the material A1 to customer.

Connecting to the Third Party Applicatin through Portal

Hi,
Does anyone know how do we connect to the Third Party Application through Portal? WHat technology EP uses to connect to the third party application and retrieve data from the system to display?
ALso if i have 2 application connected to the portal and if I retrieve one record from one application, then i want Portal to bring information related to that record from another application. In that case, do we have to maintain referential information about the records in both the applications, so that Portal will know which record id to pull from another application? How does it work?
Thank you very much in advance.
Shakil

Hi ,
Have a searched sdn before posting this? have a look and post your message if your requirement dont match with below solution.
Want to access non SAP system from EP
Regards,
Koti Reddy

IDoc-to-File with ext. Partner ... How to define the third-party system

Hi all,
I want to make an IDoc-to-File scenario with an external partner. the xml-file generated by the integration server should be forwarded with the file/ftp-Adapter to a ftp-server in New York (our XI-System is in Germany).
Is it right that I have to create a technical system and a business system for the ftp-server in New York? I want to create it as a third-party system. But how? Is it enough to give only a name for the third-party technical system?
What I have to put in "Host name" or can I leave this gap empty? And have I to choose Products or is it not nessesary?
Thanks for your answers
best regards
Christopher Kühn

>
> Is it right that I have to create a technical system
> and a business system for the ftp-server in New York?
Yes it is the correct way to do this.
> Is it enough to give only a name for the third-party
> technical system?
> What I have to put in "Host name" or can I leave this
> gap empty?
Dont remember exactly. But I think HostName is mandatory. You can give any value that you want here. Does not matter at all.
Ideal way is to give the HostName of the FTP server here. if unknown give any value.
And have I to choose Products or is it not
> nessesary?
>
Not necessary. But ideal would be to assign the products which you have created in the SLD for your XI content so that the SWCV is also associated with this Tech System
Regards
Bhavesh

How to Deploy the third party EJB 3.0 jar in web application

I have a web application which calls services provided by EJB 3.0 beans packaged in third party jar. How do a configure the ViewController project to deploy the beans to the weblogic server when I run the application rather than deploy the EJB ear as a stand application to the server?
The jar file has already referenced by the project. In the "EJB Module" of project properties I've set the EJB Version property to 3.0, but the Annotated EJB 3.0 Bean Classes list remains empty, presumably because I have no beans defined in the sources of the application. When running the project the EJB jar did not deploy automatically. Is there something wrong? How can I achive this goal?
Best Wishes~
ELeven.Xu
IDE: JDeveloper 11g (11.1.1.2.0)
OS: Linux

I don't think this technique will work. I added a META-INF/ejb-jar.xml file to the application, and added a <session> section for one of the EJB 3.0 beans from my third party jar. I specified values for <ejb-name>, <ejb-class>, and <session-type> hoping the rest of the configuration would be determined from the annotations in the class. When the server starts, this warning message is displayed:
Oct 30, 2009 12:06:41 PM com.evermind.server.ejb.logging.EJBDeploymentMessages warningSessionBizInterfaceNotDefined
WARNING: \[current-workspace-app: ... \] - The session bean does not has at least one business interface defined for client access. The bean is not accessiable and usable at runtime.
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 11042 ms.
\[sic\]
EJB 3.0 beans are not required to define business interfaces, as they are supposed to be generated by the container.
Good idea, but still cannot deploy beans from the third party EJB 3.0 jar referenced by my project to the embedded OC4J container. Still investigating.
Thanks,
Steve
By the way, I have been able to use your technique to deploy EJB 2.1 beans from third party jars in other projects, just not EJB 3.0 beans that do not provide ejb-jar.xml deployment descriptors, nor business interfaces.
Edited by: user10375549 on Oct 30, 2009 9:51 AM - Added relevant comment regarding technique described for solving problem. It works for EJB 2.1 beans but not EJB 3.0 beans.

How to access the third party plugin

i am new to javascript and InDesign.now my work is to access the Third Party plugin styles, the third Pary plugin is all about InMath.
is it possible to access third party plugin through java prgramming.
plz help me.....
by
subha

Hello, I'm not a very accomplished JavaScripter, but have found that you can access some InMath at least in CS3. I only needed to be able to refresh the InMath styles from a script.
If you run this script...
app.menuActions.everyItem().name;
it will return the names of all the available menu actions. The list is quite long, but it includes some of the InMath actions. At least the ones you can assign keyboard shortcuts to. In my case, I needed to refresh the InMath styles from a script. So I found the name of the InMath menu action that was returned from the above script (Refresh All InMath Expressions) and was able to make a script that refreshed the styles like this.
app.menuActions.itemByName("Refresh All InMath Expressions").invoke();
However, I'm trying to figure out how to do this in CS2 because my client is still using CS2 and can't find the CS2 version of menuActions.
I think I read your other post about the find/change fillColor bug. I was stuck in the same place and now have it working thanks to the posted help. I was working on a script that would fix fractions based on their colors.
Hope this helps.
Andrea

How to use the third party apps?

I see Apple has put some third party apps on their site, but how do you download them and use them for itouch?

I think you are talking about WebApps?(http://www.apple.com/webapps/). If you are they cannot be downloaded, but can be bookmarked to your homescreen if you purchased the update. If you didn't purchase the update they can be added to your Bookmark section. To access them you will need an internet connection.
Message was edited by: connorbj

How SAP handles AFS Third Party Orders in ECC system?

Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Basically when the Dierct ship Sales Order is created, corresponding PR is created for it and using this User exit certain fields in this corresponding Purchase Requisition is filled from Sales Order but this user exit is missing in ECC system.
Could anyone please let me know how SAP handles the Third party Orders in ECC AFS system?
Thanks,
Ameesha

Hi Ameesha,
Did u find out any solution for it? bcoz, am also hving the same issue!!
thanq

TS2551 how do i reinstall third party plug ins to iPhoto? such as Diptic?

hi
I was using Diptic with iphotos just fine until I was asked by iphoto to install a update. Afterward I could no longer see my diptic files when trying to load pics another another site. Please tell me how to reinstall the third party diptic to my iphoto ty

As a general rule it's up to the plug-in maker to update their plug-in when the app is updated. So you will need to contact them for support.

How are the third party apps for the iPhone?

Being a long time Palm user, then moved to BlackBerry I watched the quality of third party apps really plummet due to a more restrictive development agreement.
Now considering an iPhone, I'm curious about how healthy the 3rd party app community is for iPhone, something I miss from my Palm days. From what I've heard, the development for iPhone applications is even more restrictive than for BlackBerries.
Anyone that wouldn't mind addressing one or all of these questions for me from their own experience, would be greatly appreciated.
1) Do you use third party applications on your iPhone, or do you find the native Apple software to be sufficient?
2) Are there alot of different choices for utilities, or do you find yourself pigeonholed to 1-2 programs.
3) Would you say that the third party apps are "mature" that is stable, follow similar flow/integration with the phone and designed in an intuitive way?
Again thanks for anyone that chooses to help me with this. I was really disappointed with the apps available for the Blackberry. At $15-$25 dollars each, I was usually let down by the quality and selection and overall experience.

Snarg wrote:
1) Do you use third party applications on your iPhone, or do you find the native Apple software to be sufficient?
The native software is excellent and I also have apps to fill in for things not available as part of the out of the box iPhone.
2) Are there alot of different choices for utilities, or do you find yourself pigeonholed to 1-2 programs.
If you go to the app store and browse, you'll find lots of different utilities. In some cases, there are a dozen different options that do the same basic thing and in other cases there are a couple.
3) Would you say that the third party apps are "mature" that is stable, follow similar flow/integration with the phone and designed in an intuitive way?
Some apps are well done and others aren't. Since they are developed independently, there is variability. The apps I use most frequently seem pretty stable. It all depends on your needs.

Integration of HR Masterdata with the third party Recruitment system

Hi folks,
I was doing some analysis regarding the process of integrating the HR Masterdata with the thrid party recuritment system. One of the process is exporting all the new hire data coming from the third party soffware( the entire hiring process will happen in this sytem) into the HR Masterdata.
From SPRO documentation I found there are two ways one is Inbound IDOC and the other is through interface. Since we do not have EDI service, we have to with interface, however it should not be an automated process. Because, the person getting hired has to have the intial procedure completed before hiring process occus and his data is entered into HR Masterdata. Hence the data coming from the interface file has to be processed manually
How to configure this process in HR? The version we are using is 4.6C How can this be done?
Any thoughts or ideas or leads would be really helpful.
Thanks in advance,
SK

Hello Sk,
i think the integration between SAP Recruitment and SAP Administration would be a bit more complicated as it is supplied from the SAP Recruitment tables which you probably would have to fill.
As promised I had a look to t752f. Run the following code to add lines into the table. After the values were inserted you can run PA48 without any other configuration. You will see an new line which you can select and than choose the Hire button. The system will guide you through the hiring screens and set the Name fields as default values.
REPORT zrwe_fill.
CALL FUNCTION 'HR_PREPARE_NEW_EE'
EXPORTING
lastname = 'Test_Lastname'
firstname = 'Test_Firstname'.
The function module us part of the standard HR component and offers many fields to preset in T752F. If you supply an existing EmployeeId the PA48 transaction will suggest you to do an organizational change when you choose the "hire" button. If you do not fill the value the system sets a dummy Id and suggests a hiring.
The function module is RFC enabled so if you can call an RFC from your external recruitment application you can fill the T752f table. If that works and you need additional fields just copy the module and add whatever you want.
Rgds.
Roman

How do I add third party plug-in to Acrobat Pro XI and add things to the main menu bar.

Running Acrobat Pro XI, (CC suite) on MacPro OSX 10.8
Main Menu Bar only shows 'Acrobat File Edit View Window Help'.
No Third Party Plug-ins are shown under 'Acrobat' on the Menu Bar
Acrobat Pro 9 (also installed) shows the Third Party Plug-ins and a lot of other options on the Menu Bar
How do I get Pro XI to look like Pro 9

You'll have to install PitStop again and point it at the new Acrobat when it asks you, or you can open the Acrobat 9 package and copy PitStop from the plugins folder into the same folder in Acrobat XI.
You didn't mention which version of PitStop you have so you'll need to check the system requirements to make sure you are compatible.
http://www.enfocus.com/en/support/knowledge-base/pitstop-pro-system-requirements?q=system+ requirements
Also be aware of the interface change between Acrobat 9 and XI, you no longer have all the tool bars available on the top, you now have tools in a column on the right.
But you can drag tool icons up to the top and make sets as well.
You can get information on the differences within PitStop here.
Reference Guide

Integration of Oracle Apps with the Third Party Label Printing Software

Hi,
I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
Third Party Label Printing Software will pick the file from the TCP/IP Port.
I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
Below are the few links for Oracle WMS:
http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
Thanks In Advance..

Hi,
I assume, i have already setup profile 'WMS: Label Print Mode' to Synchronous - TCP/IP.
Basically, you dont have to create any concurrent program for XML creation, Oracle will do it for you 'out of box'.
Also set 'WMS: Synchronous TCP/IP label request delay' to 100, this is a required step, though none of the documentation talks about it.
if you think that all the requests are not handled correctly, then you will need to increase this delay further.
Lastly, verify that the printer is setup correctly in Oracle (Place where you specify IP Address and port)
Thanks,
Hrishikesh

Integration of Oracle Apps with the Third Party Label Printing Software(Bar

Hi,
I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
Third Party Label Printing Software will pick the file from the TCP/IP Port.
I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
Below are the few links for Oracle WMS:
http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
Thanks In Advance..

Pl do not post duplicates - Integration of Oracle Apps with the Third Party Label Printing Software

I Have Iphone 4... I had purchased from any store in second hand... and the third party whose this iphone not in contact with me and my phone goes to lose mode.. how can I activate my iphone

I Have Iphone 4...
I had purchased from any store in second hand...
and the third party whose this iphone not in contact with me and my iphone in lose mode..
how can I activate my iphone?????Plz help me...
<Email Edited By Host>

Digant Mevada wrote:
can possible to contact apple server manager tu know my id or anythig do..??
There is nothing you can do except return iPhone & get your money back.
You will not be able to use the iPhone.
Apple will not help you.
-> Find My iPhone Activation Lock: Removing a device from a previous owner’s account

How to integration the third-party forums in Portal?

Similar Messages

Maybe you are looking for