How to know From UID (I know the value) to whoom it belongs.
Hi Everyone,
I am Working on Indesign CS3 on Windows.
At startup I am getting Two Window.
One of Indesign and other showing me HWNDBasedPanelView with UID:1234 like.
Can i able to trace from UID from where it comes and to whoom it belongs.
and i also want to overcome on that problem.
Thanks in Advance.
Dattatray.
You can find the class of a valid UID using GetClass() and you can find the name of that class by using "DebugClassUtils.h".
Good luck.
Jon
Similar Messages
-
Hi All,
I have an ABAP code that write some records to a flat file. Am getting a DATASET_WRITE_ERROR when this program is run.
in ST22 i checked for any info that could be of help.
The Error Text is: "No Space left on device"
Error code: 28.
Now i want to know after writing how many records did the program threw the error.
I have a counter named WRITE_CTR. <b>Is there any way in the debug mode I can check for the value of WRITE-CTR just before the program terminated ?</b> checking the value of counter each time a record is written is not practical as there are almost 40k records in total.
In ST22 i checked the section "Chosen Variables". unfortunately this counter's value is not listed there.
Please let me know if there is any way i can see the contents of a field just before a short dump is generated.
Otherwise is there any option during debug that i can set a breakpoint on a statement when the field WRITE-CTR=<some value> say when WRITE-CTR = 30000 ?
Thanks in advance,
RitOk. Havent used Try..Catch in ABAP. I'll try using that. That should be a better way. Thanks.
I think it throws the error only after 20 or 30000 records are written. So its not possible to set a breakpoint where it writes to file and check which all records are written.
I wanted to know if there's any way to know the value of a filed just before the error is thrown. In the 'Watch' feature i saw an option to select a field and then give a comparison operator and all. Do you know how to use that ? Will that help me to break the execution when a field value equals a limit ? Just wondering what the Watch option is for!!
Regrads,
rit -
How to know the value of the variant
Respected,
material is created in the master data and material contains some variants. so from where I will be able to see the what values of that variants are created in the master data .please help me outtype the tcode vk12 for the condition record
-
How to know the status of concurrent program from back-end in oracle apps
Hi,
Can you please explain me step by step how to know the status of the concurrent program from back end in oracle apps.
Thanks,
RajWhen a record is being updated by a form, if you create a Pre-Update trigger on the block, the trigger will run for each record being updated.
Same thing happens with a Pre-Insert and Pre-Delete trigger. -
How to know the items cost from the production order.
Dear friends,
When We close a production order, if we go to the summary tab we can see the total cost of the real component and cost of the real item. My question is how to know the cost of every component used for the real product? I run the stock Audit report, and there I see a field named Calcprice, in what table where can I find this field? to get the cost individual for each component in the moment i close the PO.
Thanks a lot.
DanielThanks a lot to everybody.
You are right Thanga,
That is the data I need, but how can I get it via query because I dont find the field to know the cost in the exactly moment when is created the receipt of productiion. I was trying to locate in tables IGN1 -- IGN12 but I dont get the cost field.
Do you have any idea how can I make a report?
Best Regards,
Daniel -
Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name ='OKC_K_HEADERS_V'-- :1
AND pk1_value IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id IN (6,2,1,5)
AND (SECURITY_TYPE =4
OR PUBLISH_FLAG ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--SridharHi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this 2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm.. -
How to know the run time of a program..?
Hi Gurus,
How to know the exact run time of a program....?
Suppose i've a program....I've changed the code to improve the performance.
Now i want to compare run time of older and new one...How to do this...?
Pls help me ....
Thanks and Regards,
NagarjunaHi,
go thru the below mentioned code............
data: start TYPE i,
end TYPE i,
dif TYPE i.
GET RUN TIME FIELD start.
SELECT SINGLE bukrs belnr gjahr blart budat
FROM bkpf
INTO (cc, doc, fy, doc_ty, pst_dt)
WHERE bukrs = p_bukrs
AND belnr = p_belnr
AND gjahr = p_gjahr.
GET RUN TIME FIELD end.
dif = end - start.
WRITE: /001 'Time for select',
067 ':', dif, 'microseconds'.
Reward all helpful answers.
Thanks -
How to know the size of a DATABASE ?
Guys,
How to know the size of a DB ?
Also
How to know the size of a TABLE ?
How to get the content of a procedure/view/trigger ?
Inputs are welcome !How to know the size of a DB ?If you want to know the physical size, query dba_data_files + dba_temp_files. if you need to know the actual consumed space in those files, compute sum of bytes from DBA_SEGMENTS.
How to know the size of a TABLE ?Query all/dba/user_segments.
How to get the content of a procedure/view/trigger ?all/dba/user_source, all/dba/user_views, all/dba/user_triggers.
Message was edited by:
Satish Kandi -
How to know the payload size of message
hi can anybody tell me how to know the payload size of message?
Message was edited by:
vvr murtyHi,
To know the size of the input message , i hope we have one option , after copying the test payload from the SXMB_MONI into Message mapping test -- click on test
after come back to design tab in message mappign
click on left side root node and Press CTRL+SHIFT + mouse right click and click on trace -- you can see the size of the message payload.
In SXMB_MONI..
see the payload messges
also see the below link
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Regards
Chilla -
How to know the list of reports that are in usage
Hello,
How to know the list of reports that are in use from the last 3 months by the users on Bw server.How basis team will help me in this regard?
Regards,
Anand.Hi,
Pl look at following tables if you need any further detailed information
Table Name Use of the table
RSZELTDIR
Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references .
To get a list of query elements built on that cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename]
RSRREPDIR
Directory of all reports (Query GENUNIID) .
To get all queries of a cube.filter by: OBJVERS = 'A', INFOCUBE= [stage:cubename]
RSZCOMPDIR Directory of reporting components.
To get query change status (version, last changed by, owner) of a cube.
RSZRANGE Selection specification for an element
RSZSELECT
Selection properties of an element
RSZCOMPIC
Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV
Global Variables in Reporting
RSZCHANGES Change history of reporting components
Thanks and regards -
How to know the tables for a datasource like 2lis_17_order
Hi,
How to know the tables for a data source like 2lis_17_order, i have checked in Extract structure of that data source, only fields are visible but how will i know that these fields are getting extracted from so and so tables?
pls respond. thanks in advanceHi,
Go to RSO2 at source system, Enter data source and click on display.
if its table based then you can see table name there it self.
if its view based then notedown the view name and go to SE11, provide view and click on display. see joined table names there.
Thanks -
How to know the delay in redo log apply on Active Dataguard 11g
Hello All,
How to know the delay in redo log apply on Active Dataguard 11g...
Do we need to wait till log switch occurs?
Or is it recommended to schedule a log switch every 15 min, no matter data is updated/inserted or not in primary?
Please suggest...
Oracle : oracle 11g Release 2
OS : RHEL 5.4
Thanks
Edited by: user1687821 on Feb 23, 2012 12:02 AMHello CKPT,
Thank you for the valuable information...
We have not configured databroker.
Output of the query
SELECT * FROM (
SELECT sequence#, archived, applied,
TO_CHAR(completion_time, 'RRRR/MM/DD HH24:MI') AS completed
FROM sys.v$archived_log
ORDER BY sequence# DESC)
WHERE ROWNUM <= 10
Primary...
SEQUENCE# ARCHIVED APPLIED COMPLETED
29680 YES YES 2012/02/23 01:11
29680 YES NO 2012/02/23 01:11
29679 YES NO 2012/02/22 23:11
29679 YES YES 2012/02/22 23:11
29678 YES YES 2012/02/22 23:11
29678 YES NO 2012/02/22 23:11
29677 YES YES 2012/02/22 22:32
29677 YES NO 2012/02/22 22:32
29676 YES YES 2012/02/22 22:02
29676 YES NO 2012/02/22 22:02
Standby...
SEQUENCE# ARC APP COMPLETED
29680 YES YES 2012/02/23 01:11
29679 YES YES 2012/02/22 23:11
29678 YES YES 2012/02/22 23:11
29677 YES YES 2012/02/22 22:32
29676 YES YES 2012/02/22 22:02
29675 YES YES 2012/02/22 21:24
29674 YES YES 2012/02/22 19:24
29673 YES YES 2012/02/22 18:59
29672 YES YES 2012/02/22 17:42
29671 YES YES 2012/02/22 17:41
Primary shows yes as well as no...
Next,
From primary:-
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
THREAD# MAX(SEQUENCE#)
1 29680
From standby:-
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 29680
What is the redo transport service you are using? is it LGWR or ARCH ?
Output of query select * from v$parameter where name like 'log_archive_dest_2' shows below value...
SERVICE=b_stdb LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=b_stdb
So is it lgwr already configured...? if yes then how do i see the delay in both servers..
Yes, the network is good as they both resides in same LAN within same rack
Thanks... -
How to know the parameters passed between the pages
Hi , am working on the customizations.
Can anybody tell me how to know the parameters passed between the pages in OAF.
Thanks a lot in advance.
regards
kumarU can read
Framework ToolBox Tutorial Lesson 2, Part 4: Page-to-Page Communication
in this path
<<your OAF folder>>jdevdoc\WebHelp\toolbox\510\lessons\lesson2_pagecom.htm
OAPageContext
PutEncryptedParameter( )
GetDecryptedParameter( )
OAPageContext (called from UI client)
putTransactionValue( )
getTransactionValue( )
removeTransactionValue( )
OADBTransaction (called from server)
putValue( )
getValue( )
removeValue( )
OAPageContext (called from UI client)
TIP the Framework expects to introduce methods for managing session data from the server at some point in the future.
putSessionValue( )
removeSessionValue( )
getSessionValue( )
Good luck ! -
How to know the battery %
tell me how to know the battery % by any software i try many but no use ....
It would help if you told us what phone you have. Normally for a s60 or better phone, you can just use Nokia Battery Monitor from Ovi Store.
If you find my post helpful please click the green star on the left under the avatar. Thanks. -
How to know the forms associated with a specific transaction
Hi..
Can anyone please suggest me how to know the forms associated with a specific transaction.
For Example In Finance module.
I came to know from SDN the form associated with F.64 as F140_acc_stat_01.
But i need the steps how to track the form name.
Regards..
VinodhHi,
1.We cann't find the forms associated with a specific transaction.
2.But,based on requirement we can go for the form selection.
3.Suppose in account payable and receivable , we have different forms like customer statement, Dunning and Chek form etc.
4.The functional people can find the form name in SPRO and give the details of the requirement.
5.If u have the output type or formname u can go for the TNAPR and TTXFP tables and u can search for the respect object.
6.For FI u can directly find in the SPRO, by searching it with the form name.
Regards,
If helpful reward with points(Don't forget).
Maybe you are looking for
-
Remote control plays wrong track!?
hi, i have set up a DVD with four buttons playing 4 tracks, each of which has 1 chapter (or clip) and returns to the menu after playing. after i've burned the DVD and placed it into the DVD player, pressing the numbers 1 through 4 however causes the
-
Gurus, Is it possible to read/write XML using DB Link? If yes please let me know how to achieve this. Thanks in Advance. Venu
-
How to change the constraints?
I add a JPanel to a JFrame using: this.getContentPane().add(jPanel2, new GridBagConstraints(0, 1, GridBagConstraints.REMAINDER, 1, 1.0, 1.0 ,GridBagConstraints.NORTHWEST, GridBagConstraints.BOTH, new Insets(110, 10, 10, 10), 0, 0)); Is it possible to
-
Saving last screen layout for next edit session?
Before making a feature request, I wanted to find out if there's a way to do this. When I'm editing, I often want to open a file in exactly the same place I left off, including the zoom level, part of the image being viewed, window sizes, etc. Is t
-
Export Settings from FCP to iDVD
Can I export a timeline that is NTSC-DV using QT to 8-bit uncompressed? will it improve the quality of the titles? They look awful when I export them in "current settings"