How to know if a schedulling agreement is created via EDI

Hello,
I would like to konw if a schedulling agreement has been created via edi. Is there any field or any transaction where is indicated so?
Thanks a lot!
Regards,
JMadariaga

Hi,
in your title bar "Display scheduling agreement xxxxx", you should have a "Services for Object" icon
If this is not present,  you may have to add it to your profile in SU01
(Just set SD_SWU_ACTIVE to X)
If the icon is there, click it
now a small toolbar should appear
If the "display relationships" icon is not greyed out, click it
You should now see all the idocs associated with this scheduling agreement
Hopefully, the first one is the idoc which created the scheduling agreement.
Also, if you just wish to see the last idoc associated with the scheduling agreement
.After you click the Fore Dl Sch tab or the JIT DlSh tab
Click the Dlv Sch Hdr
Then Click the "Curr Idoc" and you will see your current idoc.
kind regards
Paul Quinn

Similar Messages

  • How ro delete/cancel procurement Scheduling Agreement Release in APO system

    Hi,
    Can you please tell me the ways to delete procurement schedule agreement release in APO system.
    I have gone through the thread "How to delete the old schedule line release? and found two transactions but it seems both the transactions like /sapapo/cmds_del  & sappao/cmds_sc02 are used for sales scheduling agreement release deletion.
    The system is not allowing me to delete the same in APO system as these are APO scheduling agreements.
    Please help me on the same.Thanks in advance.Revert back if any further clarification is required.
    regards,
    kaushik

    Hi,
    Thanks for your reply again.
    The /SAPAPO/DELETE_PP_ORDER program does not select the release schedule lines though it selects the Scheduling Agreement Schedule Line (Not released) for deletion.
    The transaction /SAPAPO/PWBSRC2 for Deleting External Procurement Relationship but as long as the released schedule line exists , it is not possible to delete the scheduling agreements.
    I have gone through the help.sap.com site and I was not able to found anything about deletion or cancel/closing of Scheduling Agreement Release.
    Still waiting for the solution.
    regards,
    kaushik

  • How the accesses priview of schedule agreement

    how to view the print preview for the schedule agreement
    plz give your replys
    K.Raghuram
    Edited by: k Raghuram on Aug 27, 2008 2:26 PM

    Hi,
    Go to ME9L - Print/Transmit Scheduling Agreements
    Here enter the proper selection and execute
    In the output screen, click on "Display Message" to see the Print Preview
    And click on "Output message" to print the SA Document

  • Stock Transport Scheduling Agreement - PO - created but Shipping Conditions

    Hello Gurus,
    Our client has a process of STSA (stock transport scheduling agreement - instead of PO) where they want to transfer the materials from US to Europe, being Europe customer. Europe creates STSA and requests out of 100 qty first 25 by Air Shipping Conditions and the rest 75 by Ocean Shipping Conditions.
    Once we create STSA Shipping conditions we can not change in STSA in Item data ->morefunctions->shipping data. Where as same can be played around in Sales order. So currently no workaround so they are changing the customer master from Air to Ship and creating multiple STSA.
    I would like to know whether a good solution is available already and I am not aware of yet. Please let me know.
    Mahesh

    Hi Mahesh,
    We have the same issue - just wondering if you ever found a solution?
    Thanks,
    Mark

  • Updating scheduling agreements in SD via IDOC delins.delfor02 / splitting

    Dear All,
    I am having the following problem:
    I am getting an EDI 862, which should update an scheduling agreement in SAP on the SD site.
    The incoming file contains the relevant information for multiple line items and for mulitiple release numbers as well as the information for the forecast and the JIT.
    Based on SAP standard documentation, an IDOC will be only processed if it's containing a single E1EDP10 segment, means in my understanding information for exactly one line item,for exactly one relase number and either the forecast information or the JIT information.
    Due to this I need to split the IDOC into several ones, to be able to use the SAP standard process here.
    It looks like that the splitting is not posssible in XI, which we are using as our middleware. Does anybody can tell me, how to split an incoming IDOC into several ones and to have them saved in the database, so that each IDOC can have it's own status etc.
    I already tried to go away from standard and to use fm sd_salesdocument_ change instead, which is having all the relevant table structures, but finally it was not helpful, because we have not been able to execute changes to the recent release number.
    Thanks for your help.
    Marita

    Dear All,
    I am having the following problem:
    I am getting an EDI 862, which should update an scheduling agreement in SAP on the SD site.
    The incoming file contains the relevant information for multiple line items and for mulitiple release numbers as well as the information for the forecast and the JIT.
    Based on SAP standard documentation, an IDOC will be only processed if it's containing a single E1EDP10 segment, means in my understanding information for exactly one line item,for exactly one relase number and either the forecast information or the JIT information.
    Due to this I need to split the IDOC into several ones, to be able to use the SAP standard process here.
    It looks like that the splitting is not posssible in XI, which we are using as our middleware. Does anybody can tell me, how to split an incoming IDOC into several ones and to have them saved in the database, so that each IDOC can have it's own status etc.
    I already tried to go away from standard and to use fm sd_salesdocument_ change instead, which is having all the relevant table structures, but finally it was not helpful, because we have not been able to execute changes to the recent release number.
    Thanks for your help.
    Marita

  • Log for schedule agreement  division created/modify/delete at MRP (MD04)

    Tables CDHDR and CDPOS were saved when the user changed data manually using the transaction ME31L and  ME32L.
    When the new schedule divisions  were create direct at MRP, the registries were not saved.
    I searched for any configuration to activated this registry though without succesfully.

    Transaction AUT10 display the execution process though it doesn't mention exact information was changed.
    Is there any configuration to change the behavior of this transaction or another transaction I could see the information was changed, deleted or inserted?

  • How to know - For a schedule line if delivery is already created

    Hi Gurus,
    I have a sales order with one line item - 10.
    For the line item 10 ,  I have 2 schedule lines.
    How can we know if delivery is created for a schedule line.
    Which table we need to refer ? VBEP !!!
    Please help.
    Regards
    Avinash.

    Hi,
    There is no way to check that but you can check the status of sales order line itam is delivered or not in table VBUP
    and filed RFGSA.
                   Not Relevant
    A     Not yet processed
    B     Partially processed
    C     Completely processed
    Thanks.

  • How to find out the schedule agreement number from the invoice number?

    I have invoice number based on which i need to check the scheduleagreenment number
    please let me know in which table i can find the relation between these two.

    Check EKBE and EKET , EKEK

  • How to know the size of archived logs created under ASM

    I using Oracle 10g on Linux x86-64.
    I need to ship the archived logs(not the entire directory, only a few) from the Live database to the DR site, so I need an estimate of how much time it will take to ship them across the network ?
    Is there anyway I can know the size of a specific archived log file stored under ASM ?
    We can use du in ASM to know the size of directory but I dont find a command in ASM to get the size of a file ?

    No we are also switching logfiles manually , so the maximum size may not
    have reached.
    What I need is something like ls -l command in the Unix prompt which will
    help us to find the size of the file , a similar command to help us determine
    a size of file in ASM ?What is the objective?
    Anyways, you can get the size of an archived log file by quering V$ARCHIVED_LOG view.
    SQL> select sequence#, name, blocks*block_size from v$archived_log where sequence# > 180;
    SEQUENCE# NAME                                     BLOCKS*BLOCK_SIZE
           182 C:\MYDB\ARCH\ARC00182_0633314306.001             223053312
           181 C:\MYDB\ARCH\ARC00181_0633314306.001             264281600
           183 C:\MYDB\ARCH\ARC00183_0633314306.001              26209280
           184 C:\MYDB\ARCH\ARC00184_0633314306.001                  4096
           185 C:\MYDB\ARCH\ARC00185_0633314306.001                 16384
    SQL>

  • How to know if a Sales order item created with or without reference

    Hi,
    I am working on user exit USEREXIT_MOVE_FIELD_TO_VBAP, and I just wanted to know if there is a way to know if a sales order item is created with or without reference to a contract.
    I need to write the code in USEREXIT_MOVE_FIELD_TO_VBAP, however, when an SO line item is created with reference the userexit is being called twice and when the SO line item is created without reference the user exit is being called only once.
    My aim is to check if a SO line item is created with reference to a valid contract. If the item is without reference to a contract or the referenced contract is not valid, then I will have to determine the contract based on the customer contracts.
    Any help on this would be greatly appreciated.
    Best regards,
    Siva

    Hi Vindo,
    The Userexit USEREXIT_MOVE_FIELD_TO_VBAP is called twice when the SO line item is created with reference to contract. The first time the user exit is called there will be no value filled in vbap-vgbel and the second time it comes to the userexit then vbap-vgbel will have a value. I think CVBAK-VBELN will contain the reference if the so line item is created with reference and the value of CVBAK-VBELN contrains blank if the item is not referenced. Anyway thanks for your reply.
    Best regards,
    Siva

  • How to know weather Vendor ID  has been created for a Particular employee

    HI Experts,
    We have got ticket from  emploee pertaining to  his Vendor Id.
    How we can check weather the vendor Id has been created for him.
    What is the transaction code we use to check this.
    Thanks in advance.
    Sairam.

    Hi,
    For this you need to go for coustom only..
    Before the following should be identify.
    1. Personnel number should be assign in vendor master single field only because in vendor master there are five fields can mapp with personnel number.
    2. For vendor creation of employee should have different vendor group in Vedor master
    3. vender nuber range must be same as Employee number range.
    Based on above conditions you can create coustom report.

  • How to know the select stmt used in creating a table?

    Hi,
    If we create a table by selecting some records form another table, can we see the select statement used to create that table.
    example: Create table emp2 as select * from emp where deptno=20;
    is there any data dictionary table which stores select * from emp where deptno=20
    Thanks in advance.
    Edited by: 805791 on Jul 28, 2012 9:01 PM

    No. The SELECT statement is not associated with the table in the data dictionary.
    If the statement was executed recently, you may find the entire CREATE TABLE in the V$SQL view. Or, if you have licensed the AWR, you may find it in the DBA_HIST_SQLTEXT view. But there is no guarantee that the query will be in either view.
    Justin
    Edited by: Justin Cave on Jul 29, 2012 3:46 AM
    Additionally, this question doesn't appear to relate to the Oracle Call Interface so it should probably have been asked in a different forum. The General Questions forum or the SQL and PL/SQL forum would have been more appropriate.

  • How to read the contents of Input Field created via Screen Painter?

    Hi All,
    I have a module program / dialog program, on my second screen, I created an input/outbox field via screen painter of course,
    now in my PAI, how can I read the contents of the input/outbox field?
    Let's say the name of my input/outbox field is: P_WEKRS.  Note: Get Parameter and Set Parameter is ticked.
    PROCESS AFTER INPUT.
      LOOP WITH CONTROL TC_DATA.
        MODULE MODIFY_DATA.
      ENDLOOP.
    I want to get the value of the input/outbox field before my loop in table control?  I thought that it will work like normal parameter in non-dialog programs.
    Any helpful inputs will be appreciated/rewarded.
    Thanks.
    Jaime

    Hi, Jaime
    Do the following Change in you Follow Logic
    PROCESS AFTER INPUT.
    MODULE read_or_change_value. " Add this
    LOOP WITH CONTROL TC_DATA.
      MODULE MODIFY_DATA.
    ENDLOOP.
    Add the Bellow Module code in you Driver Program.
    MODULE read_or_change_value.
    DATA: P_WEKRS like " the Field on Screen. Must be the same name as on SCREEN. and Type must be same too.
    " Here you will find the Value in that Variable or if you will change the Value here you will find it change on Screen
    END MODULE.
    Please Reply if any Issue..
    Best Regards,
    Faisal

  • How to reverse a manual Journal Entry Voucher created via Custom BO

    Hi All,
    I have created a custom BO for triggering a Journal Entry Voucher for each and every Customer Invoice created in the system.Normally all Customer Invoice will be having a corresponding Journal Entry document ,apart from the default JE document I have created an additional Journal Entry for each CI through a Custom BO because of the Business requirement.I am using the default JE as the source document for the newly created JE for the same CI.
    If a custom invoice gets cancelled only the default JE will get reversed.How to reverse the newly created JE too.I there a way to carry out this reversal process through PDI using ABSL.
    Please find below the code for details.
    Custom BO contains these lines.
    import ABSL;
    import AP.FinancialAccounting.Global;
    import AP.CustomerInvoicing.Global;
    var query;
    var selparam;
    var resultset;
    var query1;
    var selparam1;
    var resultset1;
    var query2;
    var selparam2;
    var resultset2;
    query = AccountingDocument.QueryByElements;
    selparam = query.CreateSelectionParams();
    selparam.Add(query.UUID.content, "I", "EQ", this.ZJEUUID.content);
    resultset = query.Execute(selparam).GetFirst();
    selparam.Clear();
    if (resultset.IsSet())
        var CI_ID = resultset.OriginalEntryDocumentContainingObjectReference.FormattedID;
        if (!CI_ID.IsInitial())
            query1 = CustomerInvoice.QueryByElements;
            selparam1 = query1.CreateSelectionParams();
            selparam1.Add(query1.ID.content, "I", "EQ", CI_ID);
            resultset1 = query1.Execute(selparam1).GetFirst();
            selparam1.Clear();
        if (resultset1.IsSet())
            foreach (var itemIns in resultset1.Item)
                var qty = itemIns.Quantity.content;
                var pid = itemIns.ItemProduct.ProductKey.ProductID.content;
                query2 = ZProductTax.QueryByElements;
                selparam2 = query2.CreateSelectionParams();
                selparam2.Add(query2.ZprdID.content, "I", "EQ", pid);
                resultset2 = query2.Execute(selparam2).GetFirst();
                selparam2.Clear();
                if(resultset2.IsSet())
                this.ZEnvTax.content = this.ZEnvTax.content + (qty * resultset2.ZtaxPrice.content);
                this.ZEnvTax.currencyCode = resultset2.ZtaxPrice.currencyCode;
                this.InvID = resultset.OriginalEntryDocumentContainingObjectReference.FormattedID;
    //Manual creating of Journal Voucher //
    var newJV = AccountingEntry.Create();
    newJV.CompanyID = resultset.Company.ID;
    newJV.Note.content = resultset.Note.content;
    newJV.AccountingDocumentTypeCode = "00047";
    newJV.BusinessTransactionTypeCode = "601";
    newJV.TransactionCurrencyCode = resultset.Item.GetFirst().BusinessTransactionCurrencyAmount.currencyCode;
    newJV.AccountingClosingStepCode = resultset.AccountingClosingStepCode;
    newJV.ZcustomerID.content = resultset1.BuyerParty.PartyKey.PartyID.content;
    newJV.PostingDate = resultset.PostingDate;
    var sob = newJV.SetOfBooks.Create();
    sob.SetOfBooksID.content = resultset.SetOfBooksID.content;
    //Making the Credit account of Original JE as Debit account in this JV//
    var debitAccIns = resultset.Item.Where(c => c.DebitCreditCode == "2").GetFirst();
    var debitAcc = debitAccIns.ChartOfAccountsItemCode;
    var newJVGL = newJV.Item.Create();
    newJVGL.DebitCreditCode = "1";
    newJVGL.ChartOfAccountsItemCode.content = debitAcc.content;
    newJVGL.TransactionCurrencyAmount.content = this.ZEnvTax.content;
    newJVGL.TransactionCurrencyAmount.currencyCode = this.ZEnvTax.currencyCode;
    // Posting the debited account to a new GL account//
    var newJVGL1 = newJV.Item.Create();
    newJVGL1.DebitCreditCode = "2";      
    newJVGL1.ChartOfAccountsItemCode.content = "101000";
    newJVGL1.TransactionCurrencyAmount.content = this.ZEnvTax.content;
    newJVGL1.TransactionCurrencyAmount.currencyCode = this.ZEnvTax.currencyCode;
    Please respond ASAP
    Regards,
    Navin Kandasamy

    Hello Navin,
    There is an action "Cancel" in the Accounting Entry BO. Try calling that action from ABSL whenever the CI is canceled. But to do that you should have the reference of the created JEV through code.
    Hope this helps.
    Thanks & Regards,
    Meghna

  • How I get a Information about how many Scheduling agree

    Dear friend,
       Can any one tell me a process ,How I get a information about how many scheduling agreement or Schedule lines created with in given time.Any standard tcode available  ?
    Regards
    Abrar AHmed

    Dear Abrar
    - To see how many scheduling agreement is created for a given period, use VA05, click on [Further sel criteria] and tick the box against [Sales Document type]  Now input the scheduling agreement type and execute.  You will get list of all scheduling agreements created within the specified period.
    - You can see how many line items are created in a sale order for a given period via VA05.
    thanks
    G. Lakshmipathi

Maybe you are looking for