How to know if XML message sent was processed in WLPI

          Hi all,
          I've also posted this question in weblogic.integration.developer and I'm wondering
          if you could also help me. I have a JMS application that sends XML messages to
          WLPI. I want to ask:
          1. what will happen to the XML message if it doesn't match any workflow instance/no
          event was triggered?
          2. is there a way for the JMS application to know that the XML message didn't
          match any workflow instance/trigger any event?
          Any help will be greatly appreciated.
          Thanks!

I don't know - WLI is layered on top of JMS. Try posting to the
          WLI newsgroups:
          weblogic.integration.developer
          weblogic.integration.interest
          Tom
          Jo-Ann de Leon wrote:
          > Hi all,
          >
          > I've also posted this question in weblogic.integration.developer and I'm wondering
          > if you could also help me. I have a JMS application that sends XML messages to
          > WLPI. I want to ask:
          >
          > 1. what will happen to the XML message if it doesn't match any workflow instance/no
          > event was triggered?
          > 2. is there a way for the JMS application to know that the XML message didn't
          > match any workflow instance/trigger any event?
          >
          > Any help will be greatly appreciated.
          > Thanks!

Similar Messages

How do I find all messages sent by a particular sender

How do I find all messages sent by a particular sender

Use the Quick Filter bar to find all messages in a folder.
https://support.mozilla.org/en-US/kb/quick-filter-toolbar
Use Global Search to find all messages across different folders and accounts.
https://support.mozilla.org/en-US/kb/global-search

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

How do I resolve error message "mapi was unable to load aplzod.dll"? Outlook2010 on Win7

Attempts to open Outlook calendar files (apparently located) on iCloud result in the error message "MAPI was unable to load the information service C:\PROGRA~2\COMMON~1\Apple\Internet Services\APLZOD.dll". Be sure the service is correctly installed and configured."
I am running Outlook 2010 on Windows 7. I have uninstalled and reinstalled iTunes with no apparent effect. Is this a problem with iTunes or Outlook, how do I resolve it?

That's part of my problem - I was getting the error message when I tried to click on iCloud in the Calendar portion of Outlook 2010. I don't know where it was generated (iCloud, iTunes, or as an add-in to Outlook).
After my original post I tried restoring my computer to a date when I knew this worked, the restoration worked, and I can access my calendar. So that problem resolved itself.
I do have another question, but I'll post it separately. Thanks for your response.

How/ Where to Monitor XML Messages of Provider Webservice ?

Dear SDNers,
I would like to Monitor XML Messages for Provider Webservice.
I would like to tell upfront that SXM_MONI or SXI_MONITOR in ABAP Stack does not show any Messages.
I have used SOAMANAGER which is the normal Transaction related to doing all things with Webservices. Even here i have found anything Messages.
I could only see Success Messages under Webservice Logs(Webservice Logging and Tracing).
Would like to know how/ where to do i monitor XML Messages for a Provider Webservice ?
The Search around several places could not yield much to me about this Mointoring of Webservices.
A lot of documents talk about Service Provision/ Consumption, Registry, WS-RM etc. but nowhere i could encounter about Monitoring of Webservices.
So the normal links to Webservices documents where documents/ links describe about Service Provision/ Consumption, Registry, WS-RM, Protocols, Security, Transports etc. will not be of much HELP to me here.
Thanks & Regards
Venugopal

Hi Nick,
There is no big difference between synchronous interface monitoring and asynchronous interface monitoring.
Just goto SXMB_MONI, click on inbound message, it will automatically displaying one tab with name response message. Click on that response message to view the message content.
In PI7.1 you can see response message and reqquest message in RWB. Open the message by click on that, it will automatically dispay request and response messages
thanks,
madhu

How to pass a XML message as a string and to change the string back to XML

Hi there,
in our current application, we have to access a webservice with a message whose XML Schema Definition was provided by the service's provider. But when accessing the webservice's WSDL, it says that the service expects the message part as a string type.
How can I accomplish to send this structured message (as defined by the .XSD) to the webservice as a string?
Thanks in advance,

Michal,
thanks very much for your help!
I've managed to correctly serialize a xml into a string with the tips in your blog. However, I've not managed to perform the string -> xml (unserialize) step (I'm using Udo's sugestion).
The problem is that XI generates a namespace prefix in runtime (it can be ns0, ns1, ns2..., depending on the context), and so I need to reference this namespace into the unserializing XSLT. With XMLSpy, I've managed to correctly transform it using the XPath "//*:my_tag" to the string tag, but this approach didn't work in XI.
If I try to use just "//my_tag" the transformation concludes successfully, but XI says that the generated XML is not well-formed (probably because it doesn't fits the Schema of the target message, but I'm just guessing here). If I try to use "//:*my_tag", it doesn't even performs the transformation, and gives a "Problem When Testing" error, which says "Transformer configuration exception occurred when loading XSLT ...".
Any ideas on how to reference namespace prefixes in XSLTs in XI?
The codes of my XSLT's are below:
XML to string:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<my_tag>
<xsl:text disable-output-escaping="yes"><![CDATA[<![CDATA[]]></xsl:text>
<xsl:copy-of select="/"/>
<xsl:text disable-output-escaping="yes"><![CDATA[]]]]></xsl:text>
<xsl:text disable-output-escaping="yes"><![CDATA[>]]></xsl:text>
</my_tag>
</xsl:template>
</xsl:stylesheet>
String to XML:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:my_prefix="http://my_namespace">
<xsl:template match="/">
<xsl:for-each select="//*:my_tag">
<xsl:value-of select="." disable-output-escaping="yes"/>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
Thanks again!

Help, how to monitor the soap message sent by JAX-WS

Hi,everyone:
I want to monitor the soap message sent by JAX-WS using apache TCPMon.
For example, the JAX-WS is deployed on port 8080 , I make TCPMon listening on port 4444 and send soap request to port 4444 using JAX-WS.
Code in client:
@WebServiceClient(name = "JAX_WS", targetNamespace = "http://www.example.org/JAX_WS/", wsdlLocation = "file:/E:/zwz/EclipseWorkspace/JAX_WSDemo/WebRoot/META-INF/JAX_WS.wsdl")
public class JAXWS_Service extends Service {
     private final static URL JAXWS_WSDL_LOCATION;
     private final static Logger logger = Logger
               .getLogger(demo.client.JAXWS_Service.class.getName());
     static {
          URL url = null;
          try {
               //URL baseUrl;
               //baseUrl = demo.client.JAXWS_Service.class.getResource(".");
               url = new URL("http://localhost:4444/JAX_WSDemo/JAXWSBean");
          } catch (MalformedURLException e) {
               logger
                         .warning("Failed to create URL for the wsdl Location: 'file:/E:/zwz/EclipseWorkspace/JAX_WSDemo/WebRoot/META-INF/JAX_WS.wsdl', retrying as a local file");
               logger.warning(e.getMessage());
          JAXWS_WSDL_LOCATION = url;
     public JAXWS_Service(URL wsdlLocation, QName serviceName) {
          super(wsdlLocation, serviceName);
     public JAXWS_Service() {
          super(JAXWS_WSDL_LOCATION, new QName("http://www.example.org/JAX_WS/","JAXWSBeanService")); //JAX_WS
     @WebEndpoint(name = "JAX_WSPort")
     public JAXWS getJAXWSSOAP() {
          return super.getPort(new QName("http://www.example.org/JAX_WS/","JAX_WSPort"), JAXWS.class); //JAX_WSSOAP
}But i get the exception:
Exception in thread "main" com.sun.xml.internal.ws.wsdl.parser.InaccessibleWSDLException: 2 counts of InaccessibleWSDLException.
java.net.SocketException: Unexpected end of file from server
java.net.SocketException: Unexpected end of file from serverAnd the TCPMon doesn't receive anything.
If i use Axis2, the TCPMon will work fine.
I cannot figure out how to configure the webservices.
Could anyone help me? Thanks a lot.

[http://blog.vinodsingh.com/2007/02/monitor-soap-messages.html|http://blog.vinodsingh.com/2007/02/monitor-soap-messages.html]
Edited by: vinod.singh on 7 Apr, 2009 11:03 AM

Lost iphone now replaced - how do I retrieve any messages sent to me in the interim period?

Hi there,
I recently lost my iphone 4 on the underground. I put in a claim and have just received my replacement. It's been over a week since i lost my phone, i didnt have automatic sync with icloud set up before (i do now) and so my restore isn't as complete as it could have been.
I'm not so worried about the loss of old messages / pictures etc (par for the course), but i was my birthday the day i lost my phone and i missed half of the messages i was sent - I would really like to get these back if i can.
is there anyway that i can get messages sent to me since the phone was lost restored to my new phone?
Many thanks!
Jodi

Now why didn't i think of that? Thanks very much - i'll give it a go this evening.
J

Monitor XML-Messages sent by the XIF adapter

Hello to everybody,
I am looking for a possibility to monitor all XML-messages that are sent by the XIF Adapter to external servers. I would like to see the detailed XML messages.
Does there exist anything?
Thanks and regards
Michaela

Hi Michaela
XML messages can be sent to the SAP infrastructure where the XML messages can be mapped in to other XML schemata.CRM business connector communication.IDocs should be used:An IDoc transfer is quicker in comparison to SOAP/XML because the IDoc document contains no metadata information(tags)unlike an XML document ,and therefore ,the size of documents sent down line is substainally smaller in comparison.More information about XIF adapter may be found in the SAPNet vai the alias:crm:ci about the external systems.
Cheers

How to parse a XML stream sent to servlet with PUT method

Hi,
I have to interface my servlet app with other apps communicating with XML.
This way, My servlet will receive a XML stream in the http request, parse it and send back a XML message.
What I've done is :
An html page to send a XML File with a put method :
<form enctype="multipart/form-data" method="PUT" action="http://localhost:8080/MyApp/servlet/TestUploadServlet">
     <input type="file" size="20" name="FileToUpload" value="Select File">
     <input type="submit" name="UploadFile" value="Upload">
     <input type="reset" value="Reset">
</form>
A servlet TestUploadServlet with :
SAXParser parser = new SAXParser( );
Trace.traceLine( "SAXParser" );
parser.setContentHandler (this);
try {
parser.parse( new InputSource( requete.getInputStream() ) );
catch (SAXException e) {
Trace.traceLine( e.getMessage() );
catch (IOException e) {
Trace.traceLine( e.getMessage() );
and the methods startElement, stopElement and other to work with the elements detected by the parser (already used by other programs parsing local xml files).
And it doesn't work.
is the html code is a good way to send a file in the http Put method ?
is the parser.parse( new InputSource( requete.getInputStream() ) ); a good method to read the stream ?
please help.

I think the problemn comes from the method used to send the <XML> stream.
Using an html form doesn't seem to be a good method.
I tried several methods or examples found and none of them seems to work.
here is another example in the servlet side :
public void doPost(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException
ServletOutputStream output = res.getOutputStream();
output.println("ContentType: " + req.getContentType() + "<BR>");
int content_length = req.getContentLength();
output.println("ContentLength: " + content_length + "<BR>");
if(content_length > 0) {
output.println("Content: ");
ServletInputStream input = req.getInputStream();
byte [] buffer = new byte[1024];
int nb;
while((nb=input.read(buffer))!= -1) {
output.write(buffer,0,nb);
Can somebody tell me how to write a java code sending a http request with the content of a file in the content of the request ?

How to find an XML message ID with a wildcard QueueID

Hi,
My scenario is: transfer purchase orders from SAP SRM to marketplace(3rd party system)
The QoS is EOIO, therefore my POs are transferred with Queues but each queue has a leading prefix which are all registered.
The project is already go-live for over 6 months.
I have tried with SXMB_MONI of course, the display of Messages is far too limited(only 2000 messages is allowed to be displayed one time, or, is any way to adjust this?)
And also a table called SXMSPMAST, I searched with a queue id "*3000012345" in the field "QUEUEINT", no result. (3000012345 is the PO number)
Is there any other table to find a certian message by queue id?
Thanks.
Regards,
Klein

hi,
>>>>Is there any other table to find a certian message by queue id?
do you realy want to search for message id by queue it?
wouldn't it be easier to search with PO number
(which is probably inside the XML message?)
if so then you can use TREX to search inside the XML messages
payload (from XI SP15)
isn't this an easier way?
Regards,
michal

How to split big xml-messages with file inbound adapter

Hello,
we have big xml-messages in our filesystem, which are processed by XI 3.0 (SP11). We are using the file inbound adapter. Now we want to split these big xml-message into some smaller messages.
Exist there a corresponding function to the "xml.recordsetsPerMessage" which is working with xml-files?
Thanks!
Regards
Stefan

Hi,
maybe you can split the message in the BPM
with 1:N mapping?
Process Integration (PI) & SOA Middleware
I don't think anythink like "recordsetsPerMessage" is possible for xml messages
Regards,
michal

XML message is not processed in SXMB_MONI

In SXMB_MONI txn code (PI 7.0),we are not able to get updated with any XML messages from a folder on application server what could be a reason for this problem..can we see the log details of the same from anywhere .How can we rectify this problem
I would appreciate all your help

In SXMB_MONI txn code (PI 7.0),we are not able to get updated with any XML messages from a folder on application server what could be a reason for this problem..can we see the log details of the same from anywhere .How can we rectify this problem
I would appreciate all your help

How to show execution error message from a Process

hi
i have a requirement like to display the error messsage returned by the proceure.
I have a process with point After Submit and validations, where i am calling a procedure which returns the execution status with SUCCESS or FAILURE;
and if it FAILURE, it will return the error_message also, how can i show this message to the user just like how we are showing the process success message/validation message.
And i need to stop the process execution there itself once its got failed;
how can i achieve these two? anyone can give some inputs....
thanks in advance
renjish

paul and denes, thanks for the quick reply...
i tried the both option the message is coming properly. but the thing is i want to stop the execution there itself where i got the error from the procedure and the page should be remained in the same page.
currently i have a page 10(customer search screen), from there i called page 102 (customer edit screen) and in the page 102 i attached the process which includes the procedure to update the customer details;
Normally if update is success, the procedure will return SUCCESS and its navigating to the page 10(customer search screen.). so here if FAILURE is returning by procedure, i need to be in the same page i.e 102(customer edit) by showing the error message..just like a validation message...
currently whatever the procedure returns either SUCCESS or FAILURE, it goes to previous screen, but i need the method just like how the validation works if it fails.
hope you got....
regards
renjish

How can I remove a message that was posted by mistake?

I was composing a question, and when I switched out of Safari to look at something in the Finder, the incomplete message got posted as a question. I saw an "edit" button, and tried deleting all the content of the message, but now am told "You can not post a blank message. Please type your message and try again." I don't want to post a message; I want to delete it. Anyone know how to do that?

Thanks for taking the trouble, folks, but I guess that's what I did, in effect. I was hoping there might be a way to remove it entirely (hate to waste the electrons, the Internet being forever and all), but no such luck, I guess.

How to know if XML message sent was processed in WLPI

Similar Messages

Maybe you are looking for