How to know interface on which packet arrived

I am trying to receive raw IP packets in Solaris. Is there a way
to know which interface the packet arrived on. Stevens mentions
that ancillary data should provide the incoming interface
information, but does it work on Solaris ?

Hi Dilip,
where in ecc side i can see same count
Goto R/3 system> RSA3 transaction> there will be two fields Extraction or something & no.of calls--> set them to max values like extraction = 100000 & no.of.calls=100
Then click on the Extract button--> you will be able to see the number of records
want to know from which table from source side data is coming to this infobject
Goto transformation between the DSO & DS... Here check to which IO the filed 0PRODORDER is mapped
Then goto SE11 transaction> enter the table name> click on contents--> check the values for that field
If you dont know the table name> goto RSO2 transaction> enter the DS name> display> here you will be able to see from where you are getting the data>>then follow the above step(SE!11)
(or)
double click on that source (might be table /FM/Etxtract structure etc)> it will take you to that source structure> contents--> check the field values
Hope it helps!
Regards,
Pavan

Similar Messages

  • How to know time in which session last activity is done

    Hi ,
    I want to know that in which users session last activity time is done. I am seeing inactive session but i want to be sure that the last activity is done on the same day when i am going to kill the session after checking users session by v$session.
    Regards,
    Vikas

    Look at V$SESSION.LAST_CALL_ET.
    Quoting the documentation :
    LAST_CALL_ET NUMBER
    If the session STATUS is currently ACTIVE, then the value represents the elapsed time in seconds since the session has become active.
    If the session STATUS is currently INACTIVE, then the value represents the elapsed time in seconds since the session has become inactive.
    Hemant K Chitale

  • How to know interfaces connected to BI system

    Dear Experts,
    I want to know how many interfaces my BI SYSTEM in connected to.
    How can I find that.
    Thanks

    Have a look in your documentation, if your system interfaces are not documented, then something is wrong in your place... But on the other hand, you could check RSA1 for datasources, SM59 for remote connections or WE20 for connected logical systems. Be aware that severe damage can be caused be unknowingly changing things in these transactions!
    Good luck, Michael

  • How to know when all callbacks have arrived

    I use code like
    for(a thousand times){
    org.xbill.dns.SimpleResolver.sendAsync()//query my nameserver
    public void receiveMessage(Object id,Message msg){
    resolutionsvector.add(msg)
    public void handleException(Object id,Exception e){
    how do i detect when all callbacks are received?
    i tried counting but sometimes the queries match the resolutions while there are still new queries to be created (do not know why thread creation/use is slow sometimes) and sometimes the program fails to detect it has finished.
    thought of creating a resolution class for the resolutionsvector saving the state of all queries and using an additional thead to test if all are processed once every second.
    is that a way to do it or is there a design pattern for 'joining' the threads without being able to do exactly that (the threads are controled by a resolver class i would like to use without changing it) i should apply (if applies: where do i find documentation?)
    best regards
    erik

    ++

  • Reading the Interfaces name which the class is implementing in a COM dll is implementing.

    Hi All,
    I'm using .NET Reflection to read a COM dll. I'm able to fetch the classes that are present in the dll. But I would like to know interface name which this class is implementing.
    For a .NET dll we can know the name of class's implementing interface name using the <classname>.BaseType.Name property.
    How can I know the interface name which this class is implementing (if any).
    Please let me know how to do this for a COM dll.
    Thanks in advance,Satish
    Thanks, Satish Bommideni "Success usually comes to those who are too busy to be looking for it."

    Hi,
    Thanks for the reply.
    I'm reading the COM assembly using the methods available in oleaut32.dll.
    Also I've imported the namespaces
    System.Runtime.InteropServices.ComTypes;
    System.Runtime.InteropServices;
    to use its respective methods and thus I'm able to read it's classes.But donot know what property to check for this class's interface.
    Kindly let me know if you need any further information.
    Thanks, Satish Bommideni "Success usually comes to those who are too busy to be looking for it."

  • How to know which interfaces are going to which switch?

    How to know which interfaces are going to which switch ?
    I know that cdp will show this information. But CDP will not show info about the devices connected to my device and whose link between is administratively down.
    Regards,
    Chandu

    I don't want to the end devices location.
    For example, i have a switch that connect to multiple switches few using etherchannels and few using stand-along ports.
    So assume that one of the link whether it may be entire port-channel or a stand alone link that connects to another switch has been shut down manually by some x person...
    Then how can i know that which interfaces are connecting to that switch. In this case i think CDP will not  help because it will hold the information of ports that are up.
    Regards,
    Chandu

  • How to know which Oracle version database I am using ?

    Hi all,
    I am configuring an administrative file on the server and there are many databases in our company : there are Oracle8i, Oracle9i and Oracle 10g databases.
    What I know only is the connect string which I use to connect to a database via Sql*Plus. But I do not know if it is in 8i or 9i or 10g.
    So can you help me how to know the database version which I am using ?
    Thank you very much indeed.

    To be clear I tell you my big problem : I am developing a forms application. There is a specification in my project telling that if the end-user does nothing during a periode of time which can be set by an administrative user , say 3 minutes , then the end-user session is disconnected. So how to implement this ?
    I tried to use profile and the sqlnet.expire_time but it is too long greater than the set time-limit !
    So what is the best way to implement this functionality ?
    Note that in my forms application, I wrote a query on the dba_profiles view to get the value of the column limit for the resource_name idle_time. All users , that is the "public" keyword , have been granted select on dba_profiles by sys , and this value of the limit column is the time-limit I used in my forms. When the forms application is run then there is a timer created which periodically tests connection to the database by issuing a simple select statement. The periodicity of the timer is set to the value of the limit column in dba_profiles plus one minute because I set sqlnet.expire_time to 1 minute. When the disconnection arrives then there should be a message displayed to the end-user saying that he cannot do anything because his session has been stoped.
    I think I was clear and I am waiting for a good advice from all of you.
    Thank you very much indeed.

  • How to link snp_scen_task to which interface or LKM used

    Hi, I need to know how to link snp_scen_task to which interface and KM used.
    my sql as below:
    --start--
    SELECT *
    FROM [dbo].[SNP_SCEN_TASK]
    WHERE TASK_NAME3 ='Generate Control File'
    and DEF_TXT like '%os.system%'
    --end--

    You can find the required information from the work repository documentation which defines the structure and content of all the repository tables and is now available on My Oracle Support. Simply login to http://support.oracle.com, and look for Doc ID 1903225.1

  • How to know which master data objects need to activated  in R3

    SALES OVERVIEW CUBE -0SD_C03
    How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
    its very urgent please advise.
    R/3 in RSA5
    Sales Master Data
    0ACCNT_ASGN_TEXT               Account assignment group for this customer   
    0ACCNT_GRP_TEXT                Customer account group                       
    0BILBLK_DL_TEXT                Locked                                       
    0BILBLK_ITM_TEXT               Billing block for item                       
    0BILL_BLOCK_TEXT               Billing block in SD document                 
    0BILL_CAT_TEXT                 Billing Category                             
    0BILL_RELEV_TEXT               Relevant for Billing                         
    0BILL_RULE_TEXT                Billing rule                                 
    0BILL_TYPE_TEXT                Billing Type                                 
    0CONSUMER_ATTR                 Consumer                                     
    0CONSUMER_LKLS_HIER            Consumer                                     
    0CONSUMER_TEXT                 Consumer                                     
    0CUST_CLASS_TEXT               Customer Classification                      
    0CUST_GROUP_TEXT               Customer Group                               
    0CUST_GRP1_TEXT                Customer Group 1                             
    0CUST_GRP2_TEXT                Customer Group 2                             
    0CUST_GRP3_TEXT                Customer Group 3                             
    0CUST_GRP4_TEXT                Customer Group 4                             
    0CUST_GRP5_TEXT                Customer Group 5                             
    0DEALTYPE_TEXT                 Sales Deal Type                              
    0DEL_BLOCK_TEXT                Delivery block (document header)             
    0DEL_TYPE_TEXT                 Delivery Type                                
    0DISTR_CHAN_TEXT               Distribution Channel                         
    0DIVISION_TEXT                 Division                                     
    0DLV_BLOCK_TEXT                Schedule line blocked for delivery           
    0DOC_CATEG_TEXT                SD Document Category                         
    0DOC_TYPE_TEXT                 Sales Document Type                          
    0INCOTERMS_TEXT                Incoterms (Part 1)                           
    0INDUSTRY_TEXT                 Industry keys                                
    0IND_CODE_3_TEXT               Industry code 3                              
    0IND_CODE_4_TEXT               Industry code 4                              
    0IND_CODE_5_TEXT               Industry code 5                              
    0IND_CODE_TEXT                 Industry code                                
    0ITEM_CATEG_TEXT               Sales document item category                 
    0ITM_TYPE_TEXT                 FS item type                                 
    0KHERK_TEXT                    Condition Origin                             
    0MATL_GRP_1_TEXT               Material Group1                                         
    0MATL_GRP_2_TEXT               Material Group 2                                         
    0MATL_GRP_3_TEXT               Material Group 3                                         
    0MATL_GRP_4_TEXT               Material Group 4                                         
    0MATL_GRP_5_TEXT               Material Group 5                                         
    0MATL_TYPE_TEXT                Material Type                                            
    0MAT_STGRP_TEXT                Material statistics group                                
    0NIELSEN_ID_TEXT               Nielsen ID                                               
    0ORD_REASON_TEXT               Order reason (reason for the business transaction)       
    0PICK_INDC_TEXT                Indicator for picking control                            
    0PRODCAT_TEXT                  Product Catalog Number                                   
    0PROD_HIER_TEXT                Product Hierarchy                                        
    0PROMOTION_ATTR                Promotion                                                
    0PROMOTION_TEXT                Promotion                                                
    0PROMOTYPE_TEXT                Promotion Type                                           
    0PROV_GROUP_TEXT               Commission Group                                         
    0REASON_REJ_TEXT               Reason for rejection of quotations and sales orders      
    0REBATE_GRP_TEXT               Volume rebate group                                      
    0RECIPCNTRY_TEXT               Destination country                                      
    0ROUTE_TEXT                          Route                                                    
    0SALESDEAL_ATTR                Sales deal                                               
    0SALESDEAL_TEXT                Sales deal                                               
    0SALESORG_ATTR                 Sales organization                                       
    0SALESORG_TEXT                 Sales Organization                                       
    0SALES_DIST_TEXT               Sales district                                           
    0SALES_GRP_TEXT                Sales Group                                              
    0SALES_OFF_TEXT                Sales Office                                             
    0SCHD_CATEG_TEXT               Schedule line category                                   
    0SHIP_POINT_TEXT               Shipping point/receiving point  
    In BW
    Base Unit of Measure     0BASE_UOM
    Bill-to party                    0BILLTOPRTY
    Calendar Day                  0CALDAY
    Calendar Year/Month      0CALMONTH
    Calendar Year/Week      0CALWEEK
    Change Run ID              0CHNGID
    Company code              0COMP_CODE  
    Cost in statistics currency          0COST_VAL_S
    Credit/debit posting (C/D)            0DEB_CRED
    Distribution Channel       0DISTR_CHAN
    Division                                     0DIVISION 
    Number of documents    0DOCUMENTS
    Sales Document Category          0DOC_CATEG
    Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
    Number of Document Items         0DOC_ITEMS
    Fiscal year / period
    Fiscal year variant                      0FISCVARNT
    Gross weight in kilograms           0GR_WT_KG
    Number of Employees    0HDCNT_LAST
    Material                                     0MATERIAL
    Net value in statistics currency    0NET_VAL_S
    Net weight in kilograms 0NT_WT_KG
    Open orders quantity in base unit of measure 0OPORDQTYBM
    Net value of open orders in statistics currency 0OPORDVALSC
    Payer                            0PAYER
    Plant                             0PLANT
    Quantity in base units of measure 0QUANT_B
    Record type                   0RECORDTP
    Request ID                    0REQUID
    Sales Employee            0SALESEMPLY
    Sales Organization         0SALESORG
    Sales group                   0SALES_GRP
    Sales Office                   0SALES_OFF
    Shipping point                0SHIP_POINT
    Ship-To Party                0SHIP_TO
    Sold-to party                  0SOLD_TO
    Statistics Currency                    0STAT_CURR
    In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
    Thanks in advance,
       Bhima.
    Message was edited by: Bhima Chandra Sekhar Guntla

    Hi,
    <i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
    I think, you are looking for master data sources(text,attributes,hier).Am i right?
    If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
    Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
    With rgds,
    Anil Kumar Sharma .P

  • How to know which hard drive contains the OS in Hp Pavilion dv7-4069wm? Upgrading.

    I'm thinking about upgrading one of my hard drives (320GB ea) in my HP Pavilion dv7-4069wm laptop for more storage.  I would like to keep the drive that contains the OS to avoid the hassle of making a copy, but I'm not sure which one that is. I haven't replaced a hard drive before, let alone a dual drive. I recently added more RAM and noticed both hard drives looked the same. Can anyone tell me how to know the difference? . 
    This question was solved.
    View Solution.

    Hi,
    The primary HDD with the operating system is shown on the diagram on Page 49 of your Maintenance & Service Guide.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to know which condition amount of PO will be added to invenotry

    Hi,
      I am making a report of material moving average price  vs  last Po price aginst which GR is made  so I want to know  how to know that  from the purchase order all conditions  which condition amount will be added to inventory  like in case of import PO along with material cost octri and fright  conditioon which are added as delivery cost  amount of those conditions are added to invenotry  and excise duty  which is also delivery cost are updated in cenvat,  so how to know  from all condition which amount will be added to invenotry.
    I dont want to take amoun which is updated at the time of GR.
    regards,
    zafar

    Hi,
      Thanks for your reply,  in case of FI  condition in OBQ3   if any accout key is assign there we can check this in OBCN  from there it is easy to understand whethere it is dedcuctible or non deductable  but in MM i am not getting details whethere the condition is deductable or non deductable 
    FRB1  delivery cost  condition account key Z04  is assign the amount of this codnition is added to the materila account
    JCVD delivery cost condition account key is Z07  the amount of this condition is not added to the material now in customizing of those account key Z04 and Z07  in Define Transaction/Event Keys there is no setting for this  then how to know  whether the amount of particular condition will be added to inventory or not.
    regards,
    zafar

  • How to know on which time dimension level we are ?

    Hello,
    I would like to know is there a variable or a mean to know dynamically on which time dimension level we are in order to use that in a CASE WHEN clause ?
    By using a sort of aggregation tables in which one of the column contains the name of the level, I could know on which level I am but I can't use that for drill down. What I mean :
    Tab1 :
    'Year' as typelevel, year
    Tab2 :
    'Month' as typelevel, year, month
    In BMM, I have made one logical table with as Source tab1 and tab2 and as columns typelevel, year and month.
    tab1 has in content column the year level
    tab2 has in content column the month level.
    So when in Answers I retrieve
    typelevel, year
    the result is : 'Year', 2008
    and when I request : typelevel, year, month
    the result is : 'Month', 2008, 1
    But if I want to drill from year to month in order to have :
    'Year', 2008
    and then after drill
    'Month', 2008, 1
    it is impossible as a filter on typelevel='Year' is added on the month level, so it retrieves 0 columns.
    If someone has an idea on how to do that it would be very great.
    Thanks in advance for your help.

    Hi Supriya,
    OOTB I think you can use SharePoint designer, but I would suggest  custom code to iterate to all pages, and get the lists that are associated with these pages.
    http://stackoverflow.com/questions/633633/sharepoint-how-can-i-find-all-the-pages-that-host-a-particular-web-part
    another one would be if those lists were never used and you can check for list with empty data.
    I would use Get-SPLists to get all of the lists to check for zero items.
    http://blogs.technet.com/b/heyscriptingguy/archive/2010/09/15/use-windows-powershell-to-manage-lists-in-sharepoint-2010.aspx
     http://sharepointrelated.com/2011/11/28/get-all-sharepoint-lists-by-using-powershell/
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • How to know which stock type updated within movement type

    Expert,
    I need to know which stock type updated within each movement type.
    I'm using two different system (SAP and Oracle) which is in each system updating stock. So i need to do stock calculation manually from that two systems.
    I'm planning to imported material document data (from MKPF & MSEG) to Oracle and then combine the stock calculation.
    And then i'm facing this :
    Ilustration :
    MIGO transaction - Goods Receipt PO - Stock Type Unrest
    in MSEG field BWART : 101, SHKZG : S, INSMK : blank --> no problem
    MIGO transaction - Goods Receipt PO - change Stock Type to Quality Inspection
    in MSEG field BWART : 101, SHKZG : S, INSMK : 2 --> no problem
    MIGO transaction - Transfer Posting - movement type 322 (reversal QI to Unrest.)
    in MSEG field BWART : 322, SHKZG : S, INSMK : blank --> problem
    in MSEG field BWART : 322, SHKZG : H, INSMK : blank --> problem
    I have a problem that in MKPF & MSEG there is no indicator which stock type updated within movement type (BWART) 322.
    How to know that first row will be updating stock QI and second row will be updating stock Unrest.??
    I've already checked to OMJJ, SM30-V_156SC_VC, table T156... and still having no clue.
    Or is it just a 'hardcode' ? And i need to do 'hardcode' too in Oracle system?
    Thank you so much.

    The stock type indicator doesn't update for the movement type 322 in table MSEG.
    At the time of transferring, you do not have to enter the stock type for movement type 322.
    I can give you one clue, check can it fulfill your requirement.
    You have two line items for movement type 322 in MSEG table, There are a field XAUTO will be updated as X for credit entry.
    You can assume, the line item (without value for XAUTO) is for less from QI stock and the line item (with value X for XAUTO) is for add to unrestricted stock.

  • How to know the consumer_group belong to which plan

    Dear all,
    How to know the consumer_group belong to which plan? I found a consumer_group name TEST in table DBA_RSRC_CONSUMER_GROUPS
    , but I can not locate it belong to which Plan.

    Do you have enterprise manager db console configured, then its easy to drill to find that information through few clicks. Not sure what's the sql query to get it. if you find one then do post here.

  • How to know which table in the database a form is accessing

    Actually Im new to oracle applications,
    Im getting an error when i open a form from system administrator responsibility saying that table doesnot exist.
    My basic doubt is, how to know which table in the database a form is accessing.
    Any response is higly appreciated.
    Thanks,
    Praveen
    Edited by: user10239520 on Sep 10, 2008 7:07 AM

    Take a look at the following thread:
    Is there a query log in EBS?
    Re: Is there a query log in EBS?

Maybe you are looking for