How to know the process code of an IDOC
Hi All,
If I want to know the process code of a standard SAP IDOC, how do I do it. Is it we42 or any table/transaction, which can show me all the possible process codes for an IDOC.
I need to know this so that I can use this accordingly in my partner profile. ( I do not have any idoc in mind, but its avery general question. How do I know what process code belongs to which IDOC)
Many thanks
Hi,
U can check using We41 and We42 tcode for both inbound and outbound case. For each process code a function module is attached check the same for required functionality.
WE60 and WE64 transaction.will list the std IDOC in SAP.
chirag
Similar Messages
-
How to know the process chain start time & end time?
HI all .
how to know the process chain start time & end time at the table level as well as in RSPC level .
regards,
SrinivasHello,
there is a program "/ssa/bwt" which will help you to know the exact time when the process was started and ended.
but the thing is you have to provide name of the process chain with the date at which it was executed.
another option is - you can double click on start process and on the last process of the chain.
here, you will get both the timings... Start time of the start process will be the start time of your PC and end time of the last process in the chain will be end time of your PC.
Hope this will help you. -
How to know the process chain start time and end time
Hi Experts,
How to know the process chain start time and end time .
Thanks in advance
Regards
Gutti
Edited by: guttireddy on Feb 23, 2012 11:30 PMHi Reddy,
You may find the run time of a PC using below steps.
1. Call SE38 > /SSA/BWT > Execute > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
Hope this helps.
Regards
Sai -
How to know the error code?
Hi,
how can i know the error code of the error occured in plsql ?
Eg if i catch the exception IN WHEN others THen i need to pront the error code.
How can i do it?exception
when others then
dbms_output.put_line(sqlerrm||sqlcode);
end; -
How to know the processing ordering in Acrobat Action wizard
Acrobat Action wizard process the files in a specific folder , I would like to know the ordering citeria of the acrobat, is it based on alphaethic/ numeric order just the same as sorting function in PHP?
Since I have to get the last file in the files list, if the ordering citeria is different from PHP , it is hard to tell.
Thanks.If you need the files processed in a specific order you're better off not counting on the order used in an Action.
My solution to this problem is to collect the file paths of the files processed by the Action in a global array and then process them using my code (from a folder-level script), which can sort them in whatever way I need them to be sorted. -
Need elp to create the process code for inbound idoc !
When I am creating a process code in WE42 and associating a
function module then another screen comming while saving....but in that screen in the drop down list..i didnt find the function module....how to solve ?Hi,
Use transaction BD51 to make the FM known as an inbound FM.
Regards,
John. -
How to know the pass ode to open apple iPad mini
How to know the pass code to open iPad mini
Only by remembering it - if you can't then there are insructions on this page for resetting a device : http://support.apple.com/kb/HT1212
-
Process Code for Outbound Idoc
Hi All,
We need to find out the Process Code for an Idoc.
Note : We dont have access to WE41, WE20 ,BD51.
Could you please suggest any alternatives.
Thanks,
SanjeetHi Gautham,
Thanks for ur reply.
But still we hv not *** to the solution.
We have available information as following:
Basic Type : DESADV01
Extension Type : EXTDES03
Message type : DESADV
Partner NUmber : XXXXXX
Partner Type : KU
I checked in Table TMSG1 and i got more than one similar process codes for the same message type.
Actually I have the generated Idoc number and we are trying to reach to the FM which populates the Idoc segments.
So if we get the process code, we can reach to FM.
Thanks,
Sanjeet -
How can we know the return code of BDC Program ?
Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
HarishHi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
msgnr type t100-msgnr,
text type t100-text,
end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
AUART TYPE VBAK-AUART,
KUNNR TYPE RV45A-KUNNR,
BSTKD TYPE VBKD-BSTKD,
MABNR TYPE RV45A-MABNR,
KWMENG(2) type C,
KBETR(2) type C,
END OF DD_VA01.
DATA:IT_VA01 Like TABLE OF DD_VA01,
WA_VA01 Like LINE OF IT_VA01,
WA_VA01_F Like LINE OF IT_VA01,
IT_BDCDATA TYPE TABLE OF BDCDATA,
WA_BDCDATA Like Line OF IT_BDCDATA,
W_FNAME TYPE STRING,
messtab like bdcmsgcoll occurs 0 with header line,
it_errmess type table of errmess,
wa_errmess like line of it_errmess,
err_message type string.
data: zf1 type i,
zc1 type c value '2',
fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
PERFORM set_header_flag.
PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = W_FNAME
HAS_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = IT_VA01.
endform.
form call_transaction.
PERFORM bdc_field using 'BDC_OKCODE' '/11'.
CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
refresh it_bdcdata.
endform.
FORM set_header_flag.
WA_VA01_F-AUART = WA_VA01-AUART.
WA_VA01_F-KUNNR = WA_VA01-KUNNR.
WA_VA01_F-BSTKD = WA_VA01-BSTKD.
if zf1 = 1.
PERFORM call_transaction.
endif.
zf1 = 1.
endform. "set_header_flag.
form create_bdc_header_data.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'VBAK-AUART' WA_VA01-AUART.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'KUAGV-KUNNR' WA_VA01-KUNNR.
perform bdc_field using 'VBKD-BSTKD' WA_VA01-BSTKD.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR' '04/06'.
perform bdc_field using 'BDC_OKCODE' '=CHOO'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
perform bdc_field using 'BDC_CURSOR' FN.
perform bdc_field using FN WA_VA01-KWMENG.
CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-KBETR.
CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
perform bdc_field using FN WA_VA01-MABNR.
perform bdc_dynpro using 'SAPMV45A' '4001'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
SELECT SINGLE msgnr text FROM T100
into wa_errmess
WHERE SPRSL = MESSTAB-MSGSPRA
AND ARBGB = MESSTAB-MSGID
AND MSGNR = MESSTAB-MSGNR.
IF SY-SUBRC = 0.
err_message = wa_errmess-TEXT.
IF err_message CS '&1'.
REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
ELSE.
REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
ENDIF.
CONDENSE err_message.
WRITE: / MESSTAB-MSGTYP, err_message .
ELSE.
WRITE: / MESSTAB.
ENDIF.
endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR 2148 0001235 R-1162 8 17
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 6 25
OR 2148 0001235 R-1162 4 12
OR 2148 0001236 R-1162 3 12
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 1 25
OR 2148 0001236 R-1162 7 12
OR 2148 0001236 R-1161 8 30
OR 2148 0001236 100-400 10 25
OR 2148 0001235 R-1161 5 30
OR 2148 0001235 100-400 2 25
OR 2148 0001235 R-11621 3 12
OR 2148 0001235 R-1161 2 30
OR 2148 0001235 100-400 1 25
OR 2148 0001235 R-1162 7 12
OR 2148 0001235 R-1161 8 30
OR 2148 0001235 100-400 10 25
OR 2148 0001236 R-1162 8 17
OR 2148 0001236 R-1161 2 30
OR 2148 0001236 100-400 6 25
OR 2148 0001236 R-1162 4 12
OR 2148 0001236 R-1161 5 30
OR 2148 0001236 100-400 2 25 -
HOW CAN I KNOW THE FUNCTION CODE OF CREATE NEW SESSION
<b>HOW</b> CAN I KNOW THE FUNCTION CODE OF CREATE NEW SESSION?
THANKS...Hi
Please put a "/n" (to open a new session after killing the current session)
or "/o" (to open a new session without killing the current session)
or "/i" (to end the current session) before the below T Codes as per your requirement...
Try thistoo <b>O0</b>
<u><b>demo-like programs</b></u>
RSIMC000
RSIMC001
RSIMC002
RSIMC003
RSIMCTRX
RSIMCTST
Reward all helpfull answers
Regards
Pavan -
How to get the process chain name if we know the data target in sap bi
Hi SAP BI Gurus,
Can any help me how to find the process chain name if we know the data target name
i mean if i know the info cube name how to find the relavant process chain which is holding that info cube
Thanks,
JoeHi R Kumar,
Check the table RSPCCHAIN.
I mean, Use Table RSPCCHAIN and give the local chain tech name in VARIANTE field and search, in out put you will get meta chain name under the field CHAIN_ID.
Thanks,
Sreehari. -
How to know the code error diagnostic hardware (AHT) ?
I want konw
How to know the code error when do it Apple Hardware Test.
Anybody have note the code error (AHT)
Thank youDoes this help: http://reviews.cnet.com/8301-13727_7-57352461-263/how-to-invoke-and-interpret-th e-apple-hardware-tests/ ?
-
How can u know the process chain total time, individual time?
Hi guru's
How can u know the process chain total time, individual time?
and what options will available in sm37?
Thanks
prabha reddyHi Prabha
Iam not very sure about total time and individual times.
But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status 2.start date & time 3. Log ID of each process chain.
or you can go to log view of particular individual chain to know how long it has run.
SM37: tcode for simple job selection.
here you check the status of job.
you can select for certain conditions like
1. scheduled
2. released
3. ready
4.active
5. cancelled
Assign points if it was helpful
Revert back if you need further info/
regards
AP -
My three year old was playing with her sisters IPOD and somehow figured out how to lock it. Now it is locked and noone knows the unlock code, Is there a way to master reset/wipe the unit?
Gretchen,
What iPod model does she own? If it's a Nano, simply connect it to iTunes and restore it.
If it's an iPod touch, you will need to connect to iTunes in Recovery Mode and restore it using the instructions in this Apple support document.
http://support.apple.com/kb/HT1808
B-rock -
Hi how do i restore my iphone 4s back to factory settings if i dont know the restriction code as the code to unlock my phone isn't accepted?? Please help I have upgraded and want to erase all my things off this phone to sell it
Forgotten Passcode or device disabled after entering wrong passcode
Maybe you are looking for
-
My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help?
-
IPhoto imports QT with wrong time from Panasonic FX7
IPhoto does not correctly import the time for audio comments recorded with my Panasonic FX7 camera. Does anyone know of a fix (including an Automator program)? These comments are saved as QT movies (with a still picture naturally, not moving) and are
-
Hi, There is an IDOC with status 68 (Error - no further processing) , Earlier it was in status 51 with the status text "INVALID DATE' . How to find out for which particular date field's the error is being thrown..?? what is the approach to find out
-
Check accounting document from FI / MM invoice?
Hi All, May I know how I can identify the accounting document are created either from FI Invoice or MM invoice. What are the related table involve and search through? What I required is. If Accounting Document is created from FI Invoice. Display
-
Hello, I'm unable to update human tasks neither via SOAP nor within the worklist application. With the worklist application I'm able to set the outcome though. I'm able to fill the form on the Task Details Page, I press the save-button, the browser l