How to know the size of the EEPROM after loading any Applet

How can I know the size of the EEPROM after loading any applet..
Any comments on this is appreciated
Thank you in advance

kishansaralaya wrote:
Thanks for your suggestion.
But when I try to use
short memRemaining = JCSystem.getAvailableMemory(JCSystem.MEMORY_TYPE_PERSISTENT);
it always shows 32767. Even after loading some applet.
And I am using 72K Java card then how it can show only 32Kbyte as the remaining memory value.This is because a short isn't big enough to display a number above 32767. One way around this is to use a byte[] to fill up some of the space with your temporary applet.
byte[] memoryFiller = new byte[32767];
short memRemaining = JCSystem.getAvailableMemory(JCSystem.MEMORY_TYPE_PERSISTENT);The value of memRemaining + 32767 is the amount of persistent memory left on the card. If memRemaining is still 32767, you can add another byte[] starting with small values and increase the size until you get a meaning ful result (less than 32K).

Similar Messages

How can we know the size of the dimension(in Line item Dim)?

Hi to all experts,
We use Line item dimension if the size of dimension is 20% or more of the fact table. My doubt is that how can v know that the size of the dimesion is 20% or more of FT?. But we never store MD in dimension tables......So please help me to understand this scenario? Thanks in advance.

Hi
Normally before modelling you will assume the number of entries in your master data and transactional data..
If your dimension is having 3 characteristics
say A,B .....and these characteristic values are say
A---10,000( Total number of master data records)
B----7,000( Total number of master data records)
then your dimenstion would be 10,000 * 7,000 =700000000
in this case you better keep A in a dimension and B in another dimension.
Normally SAP recommends your dimension table shouldnot exceed 100,000...
so whenever you expect a characteristic is having more values then you should make it as line item...
If you want to add a new characteristic to the existing model then you can decide by comparing the ratio of dimension table to the fact table..
Please have a look at the below url for sizes
dimension size
Hope it helps
Thanks,
Teja
Edited by: Teja badugu on Apr 24, 2008 12:19 PM

How to get to know the size of the biggest file in ContentServer

Dear colleagues!
Does anybody knows how to get to know the size of the biggest file in the ContentServer?
Vladimir
Edited by: Vladimir Pavlovsky on Mar 2, 2010 11:11 AM

Vladimir Pavlovsky wrote:>
> Dear colleagues!
> Does anybody knows how to get to know the size of the biggest file in the ContentServer?
Hi Vladimir,
I assume you want to know the size of the biggest file stored in the content server don't you?
This information is available through the content server API layer only - so better open this question in the knowlegde management forum.
regards,
Lars

Don't know how to reduce the size of the view on screen.

HELP! My kids have been mucking around and now my entire screen view is magnified and I can't seem to find how they did it nor how to go back to the default view. Regardless of what application I open, the window contents is twice the size of the default settings. I have searched topics in help but no success. Can anyone help?

Open the Displays pane of System Preferences and set the resolution corrctly, and turn off Zoom from the Universal Access and Keyboard & Mouse panes.
(44309)

How do we know the size from the our objects in transport request no?

Dear All,
I have the need to know the size from the objects that we're gonna transport where those objects are attached in transport request no.
Is that the way to know it ?
If yes, could you kindly let me know regarding it ?
Thanks a lot,
Best regards,
Daniel N.

Hi Niel,
If you want size and information of co files and data files, then the manual procedure is like this.
1. Using transaction code AL11 (to see files on server)
2. Goto folder DIR_TRFILES ( or /usr/sap/trans)
3. Double click on that row.
4. Inside that you will find two folders (among other folders)
    cofiles, data
5. Goinside the subfolder you are interested. Eg. cofile
6. Now suppose you request number is ABCK900168
   where ABC will be your system number, then the file name will be
   K900168.ABC
or you can search for K900168
7. The data file will have the name (in data folder)
    R900168
There you can see the size (length column name) of the file.
Hope this helps.
regards,
amit m.

How to know the Size of the Database?

Hi All,
Is there a Transaction which will give me the size of the Database. The Database System which we have is MS Sql Server 2000. Will the Transaction have the option where I could select the Client so that I could get the exact size of the Production Systems Database, will this also provide the size of the Data & Log file.
Thanks,
Kishan

check transaction db16/db17
here are db related tx:
DB01 Analyze exclusive lock waits
DB02 Analyze tables and indexes
DB03 Parameter changes in database
DB11 Early Watch Profile Maintenance
DB12 Overview of Backup Logs
DB13 Database administration calendar
DB14 Show SAPDBA Action Logs
DB15 Data Archiving: Database Tables
DB16 DB System Check: Monitor
DB17 DB System Check: Configuration
DMIG Start Transaction for Data Migration
DB2 Select Database Activities
DB20 DB Cost-Based Optimizer: Tab. Stats
DB21 DB Cost-Based Optimizer: Config.
DB24 Database Operations Monitor
DB26 DB Profile:Monitor and Configuration
DB2J Manage JCL jobs for OS/390
DBCO Database Connection Maintenance
check them may be they help you to some extent.
regards.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. Nothing there about sizing.

For the life of me, I can't find out what size a photo is in terms of inches or how to change the size of the photo[s] so I can print them. I think I read somewhere to click edit, then click adjust. I don't see anything about re-sizing when I click the adjust tab: only saturation and tint levels. Thank you.

With respect to digital images, there really is no size in inches. The size is given as number of pixels horizontally and vertically. In iPhoto '09 you click the little "i" inthe lower right side of the window and it will display information related to the selected photo, including the pixel dimensions. I do not have iPhoto '11 installed so I don't know if it is the same there.
In some applications, such as preview, it has something additional called Dots per Inch (DPI) which you would think would allow you to convert the pixel dimensions to inches. It is not a real thing, though. The DPI is determined by how large or small you have chosen to print your photo and the capabilities of your printer.
There is also something called Aspect Ratio, which is usually expressed in inches x inches such as 6x9 but that doesn't mean the size on the screen or when printed is 6x9. It is the ratio of the pixel dimensions. When cropping your photos, you will have several standard aspect ratios to choose from plus any custom ones you create.
In iPhoto '09, after you choose Print, in the Print Setting window are the settings for the size you want the photo printed. You want to shoose a setting with the same aspect ratio of your photo. Otherwise, iPhoto will resize and/or crop your photo to fit the size you have chosen.

How to Change the Size of the Parameter Form in Report6i

hi
Does any one know how to change the size of the "PARAMETER FORM" in Report6i.

Hi,
You can change it in the "Parameter Form Window" property of the Report Object.
In the object navigator, select the Report object and open its property palette. Under "Parameter Form Window" you can change the "width" and "height" properties.
Regards,
Siva B

I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto

I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto.

What format are they? Tiif? Jpeg? You can compress them with a lot of apps - including Preivew and just about any graphics editor out there. I'm not sure that 45mb would crash iPhoto thogh, are yo sure that's the cause? I know that some folks have mentioned pixel dimensions causing issues, as can color profiles.
Regards
TD

How to get the size of the webpage?

I am designing a program to
analyse the webpage content.
wondering how to get the size of
the webpage including its image's
size and etc. Thanks in advance.

As i know , the getContentLength just return
then number of characters of its HTML code.
By knowing the length of the HTML code, is
not possible for me to calculate its download
time... i wonder is there any way to get the
total size of the page including its image size,
applet size, and etc... Thanks : )

How do you change the size of the font in the menu bar running Maverick?

On Maverick, how do you change the size of the menu bar font?

Sent my feedback already:
Thank you for your feedback on the MacBook Pro.
We cannot respond to you personally, but please know that your message has been received and will be reviewed by the MacBook Pro Team. If we need to follow up with you on your ideas for improving the MacBook Pro, we will contact you directly.
We appreciate your assistance in making the MacBook Pro a great computer.
MacBook Pro Team
Apple

How to set the size of a JTabbedane to the size of the frame

I have a tabbed pane in a frame, I would like to know how to set the size of the tabbed pane, so that it occupies the whole of the frame which has been set to screen size.
Thanks

Is it not possible to use it with a GridBagLayout?Your question was "How do I get a tabbed pane to take all the space of the frame"?
You where given the answer. Did you try it? Did it work? Then why are you questioning the suggestion?
Its one line of code if you use a BorderLayout which by the way was specifically designed for this purpose.
Yes you can do it with a GridBagLayout with about 5 lines of code.
So the question is why would you want to write 5 lines of code when you can use one?
If your question was "How do I waste my time forcing the GridBagLayout to size a component to take up all the space of the frame", then you would have received a different answer. (Although most people would have told you to use a BorderLayout anyway, since its easier).

How can I reduce the size of the jvm?

I would like to decrease the size of a jvm; I've found a program that makes it, but you don't know how does it works (and you have to pay for it), I'm talking about VM Optimizer 2.0, from Invirtus.
Can anyone tell me how can I reduce the size of the jvm?
Thanks a lot.

I assume you mean the size of a JVM instance in memory and not the size of the JRE which is on the disk.
I don't believe that there is any way at present for your Java code to change the amount of memory available to the JVM. This shouldn't matter too much, though. Firstly, you can control the size of the JVM from the command prompt with the -Xms and -Xmx options. Secondly, any remotely reasonable operating system is going to wait until the JVM has requested memory before allocating all of it. If you start a JVM with a 2Gb heap, it does not occupy 2Gb of physical memory straight away.
Finally, I did a Google on InVirtus VM Optimizer and must request some information. What does that software have to do with Java? It's designed to reduce the size of a virtual computer as created by a prorgam such as VMWare. It has nothing to do with the Java virtual machine.

How can I change the size of the FINDER bar so that I can make it easier to read on the 27 inch monitor.

How can I change the size of the FINDER toolbar so that its eaier to read i.e. make the text bigger.
How can you move the orientaion of the left side menus so that they sit above a document when using word. If you have a single document open you tend to place it in the centre of the screen and the drop down menus are so far away.

I don't know of a way to change the size of the menu bar.
For the other, take a look at Menu Pop. I don't know anything about it. Just happened across it the other day.

How can I check the size of the spool in my system?

Hi,
I need to check the size of the spool in my system. How can I check that?
Let me know please.
Much Thanks!

I am not sure if you are looking for this...
In Sp01 check your spool no and click on 'Request attributes'(a hat kind of icon). and in TemSe Attributes tab you will see the size in bytes.
Award points if it helps.

How to know the size of the EEPROM after loading any Applet

Similar Messages

Maybe you are looking for