How to link third party software with labview program ?
I have designed a labview
program to analyse and make
graph and save the datas
from the photon counter using
ni USB DAQ 6008. And the
photon counter is controlled
by the third party software with
itself. both programs are
executing successfully. But
my task is run both the
program at the same time. i.e.
link the third party software
with my labview program.
How to i do this?
Your question is too vague since you give no information as to this third party application. Is it an application you wrote? Is it an application that you cannot change? Does it have a programming interface? Can you eliminate this third-party application and control the photon counter yourself? Have you tried to do a search, as this question has come up before many times. For example:
http://forums.ni.com/t5/LabVIEW/how-do-I-use-labview-to-control-other-programs/m-p/424765
http://forums.ni.com/t5/LabVIEW/How-to-operate-another-application-s-GUI-from-LV/m-p/668088
Similar Messages
-
How to configure Third party software with SAP ??
Hi all!
Its little urgent!!!
I have an overview of XI. Currently we have scenario like Third party tool is there which i want to connect to SAP through XI.
Can anybody provide answer my few queries?
1. Step by Step guide for configuration.
2. Basis configuration from SAP side.
3. Anything else is required??
Thanks in advance!Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen -
HT3964 How to remove third party software?
How to remove third party software from the MacBook Pro 2011? I have software which is freezing my opening screen.
If the files came with an uninstaller, use it. To get rid of all the stragler files most applications leave download a 3rd party uninstaller.
AppDelete
AppZapper
AppCleaner -
My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
SkipI am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
2014-11-13 QuickLookSatellite crash x2
2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
Dec 1 20:08:30 jnl: disk3s2: journal replay done.
Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
com.cisco.kext.acsock (1.1.0)
com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
com.cisco.anyconnect.vpnagentd
com.oracle.java.JavaUpdateHelper
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.wdc.WDSmartWareService
com.oracle.java.Helper-Tool
com.adobe.fpsaud
com.wdc.SmartwareDriveService
Agents
com.adobe.AdobeCreativeCloud
com.zimbra.desktop
com.citrix.ServiceRecords
com.google.keystone.system.agent
com.apple.photostream-agent
com.genieo.completer.download
com.genieo.completer.update
com.cisco.anyconnect.gui
com.citrix.ReceiverHelper
com.citrix.AuthManager_Mac
com.citrix.FMDAgent.14800.UUID
com.oracle.java.Java-Updater
com.fiplab.MailTabProHelper
com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
com.citrixonline.GoToMeeting.G2MUpdate
com.apple.AirPortBaseStationAgent
com.microsoft.SyncServicesAgent
Startup items
/System/Library/StartupItems/ciscod/ciscod
/System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
/System/Library/Extensions/hp_fax_io.kext
- com.hp.kext.hp-fax-io
/System/Library/Extensions/hp_Inkjet1_io_enabler.kext
- com.hp.print.hpio.Inkjet1.kext
/System/Library/Extensions/hp_Inkjet4_io_enabler.kext
- com.hp.print.hpio.Inkjet4.kext
/System/Library/Extensions/hp_Inkjet8_io_enabler.kext
- com.hp.print.hpio.inkjet8.kext
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/WD1394_64_109HPDriver.kext
- com.wdc.driver.1394.64.10.9
/System/Library/Extensions/WDUSB_64_109HPDriver.kext
- com.wdc.driver.USB.64.10.9
/Library/Extensions/hp_io_printerclassdriver_enabler.kext
- com.hp.hpio.hp-io-printerclassdriver-enabler
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
- com.citrix.citrixicaclientplugIn
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
- com.google.googletalkbrowserplugin
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/npg.plugin
- npg.graphon.com
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
- com.google.o1dbrowserplugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/SlingPlayer.plugin
- com.slingmedia.slingplayer.plugin.nspapi
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/FMDSysPrefPane.prefPane
- Citrix.FMDSysPrefPane
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
- com.westerndigital.quickview.prefpanel
/Library/PreferencePanes/Zimbra.prefPane
- com.zimbra.prefpanel
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Internet Plug-Ins/WebEx.plugin
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx64.plugin
- com.cisco_webex.plugin.gpc64
dylibs
/usr/lib/libaudioc.dylib
/usr/lib/libclipc.dylib
/usr/lib/libcs.dylib
/usr/lib/libdc.dylib
/usr/lib/libfilec.dylib
/usr/lib/libMonoPosixHelper.dylib
/usr/lib/libpbr.dylib
/usr/lib/libprintc.dylib
/usr/lib/libsc.dylib
/usr/lib/libSFFileMonitor.32.dylib
/usr/lib/libSFIPC.32.dylib
/usr/lib/libSFIPC.I.dylib
/usr/lib/libSFsqlite3.7.4.dylib
/usr/lib/libSFSyncEngine.I.dylib
/usr/lib/libupc.dylib
App extensions
it.bloop.airmail.beta10.Airmail-Today-Beta
it.bloop.airmail.beta10.Airmail-Composer-Beta
com.wunderkinder.wunderlistdesktop.sharingextension
com.wunderkinder.wunderlistdesktop.todayextension
com.readitlater.PocketMac.AddToPocketShareExtension
com.stylemac.instadesk.Photodesk-Feed
it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
/Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/opt/cisco/anyconnect/gui_keepalive</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.cisco.anyconnect.gui</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>--wait-apps</string>
<string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.AuthManager_Mac</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.AuthManager_Mac</string>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrix.ReceiverHelper</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.Beacons</key>
<true/>
<key>com.citrix.ServiceRecords</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.ServiceRecords</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
</array>
...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>9</integer>
<key>Minute</key>
<integer>57</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
http://www.apple.com/DTDs/PropertyList-1.0.dtd >
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.cisco.anyconnect.vpnagentd</string>
<key>ProgramArguments</key>
<array>
<string>/opt/cisco/anyconnect/bin/vpnagentd</string>
<string>-execv_instance</string>
</array>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>AbandonProcessGroup</key>
<true/>
<key>EnableTransactions</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.SmartwareDriveService</string>
<key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.WDSmartWareService</string>
<!-- <key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.download</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>download</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Downloads</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.update</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>update</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>StartInterval</key>
<integer>86400</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.microsoft.SyncServicesAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.zimbra.desktop</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
<string>start</string>
<string>-w</string>
</array>
-
How to uninstal third party software on Macbook pro
how can we uninstall a third party software
KhullarAny help here : Adobe Community: Uninstall Acrobat
There should be an uninstaller in /Applications/Adobe Acrobat/... -
How to use third party APIs with Sun J2ME Toolkit
I've installed Sun J2ME Toolkit 2.1. If I intend to use other third party APIs with my existing toolkit, how do I do that. I can manage to get the jar file of the associated API classes, but how to integrate the same with the toolkit. Thanks in advance to all who support.
if I remember right, it is enough, if you put the .jar of the api in the lib/ directory of your project (<WTK>/apps/<yourProject>/lib/ )
hth
Kay -
How to call third party software from Ecc6 using ABAP
Hi all,
I need to execute a third party software using abap coding .
The software converts doc to pdf, the input from ecc6 would be the file path.
I need to do this using ABAP.
thanks
ziv.Hi Ziv
You can use METHOD cl_gui_frontend_services=>execute
EXPORTING
application = <<<.exe file>>>
operation = 'OPEN'
to run .exe files
Best Regards
Yossi -
How to use third party plugin with FCP, I'm lost...
Hello,
I need informations about how to use plugins with FCP.
I do edit mostly classical concerts. I'd like to do basic audio post prod, without swaping between Soundtrack and FCP.
I need two simple things : add reverb (the built in reverb is really bad), and enhancer. So I looked for specialised third party audio plugins, but I couldn't manage to find something that work for me...
- Do FCP support VST plugins ? How to install them ?
- I tried a few audio units plugins. It works, but I couldn't get a friendly visual interface, like VST effects racks. Is it possible in FCP ?
- does anybody know a good reverb plugin with a friendly interface compatible with FCP ?
Please help, I'm lost !
EmmanuelI need two simple things : add reverb (the built in reverb is really bad), and enhancer.< </div>
What you NEED is a better recordist at the concert, someone who understands the peculiarities of your specific video deliver plans.
Soundtrack Pro is right up there with Motion in its impossible-to-understand interface paradigm shift away from industry standard tools. However, if you are in the position of being a sound editor, you must find a tool that works for you. STP might not be the one, certainly isn't for me. You could always try Logic. Yeah, good luck with THAT.
bogiesan -
How to access third party plugin through vc++ Programming
Hi,
i am new to vc++ and InDesign, i am using windows xp as OS and Indesign CS3 as version
now my work is to access the Third Party plugin styles, the third Pary plugin is all about InMath, that is all for mathematical relations using inmath plugin styles, my work is to accessing the styles through programming by using a InMath header files,
i tried to the best of myself, but i not get the solution,can u please give some thing usefull do this.
is it possible to access third party plugin through VC++ prgramming usign a single header file??
regards,
ramHi,
Can anyone please help me to accesss InMath styles in InDesign SDK using VC++ Programming.
Thanks
Saravanan -
How to use third party software
I have downloaded the Real Guitar demo to try out with Logic. I have never used sounds other than those that came with Logic. How do I set up Real Guitar so that I can use those sounds in Logic? Thanks.
Quit Logic. Install RG, just follow the onscreen instructions. When the installation is complete, start Logic, create a *Software Instrument track,* go to the *i/o slot* on the *channel strip*:
!http://farm5.static.flickr.com/4006/46126704682468f6d04em.jpg!
click it and select Musiclabs>RealGuitar:
!http://farm4.static.flickr.com/3338/4612670388_ac07dc50d0.jpg!
and strum away - whilst keeping the RG manual open in the background. -
Calling third party software from LabVIEW
Hi All,
In one of the requirement, I need to open the Debugger(AXD debugger) then needs to send some commands from it.
Is it possible to invoke debugger from LabVIEW and work on specific text boxes in the debugger.
Details : APIs or DLLs related to debugger are not exposed to outside world.
I am using teststand3.1 software as manangement tool.
AXD debugger runs on Windows.
Is any body come across similar type of issue ?,,Please suggest me the way to wokr on it.
Regards,
KHNIf you cross post to multiple forums, please provide a link to your other posts.
-
hi,
I like to know if it is possible to install data recovery software on a extern harddisk ,and run it from there , just run the third party software in the memory of windows essential 2012 to recover data from its harddisk which has
raid 0 or 1.
if it is possible to install third party softare on extern harddisk or on usb stick on run it from there which steps I have to take ,or if there is some article about it on windows website.
how to install third party softwares on extern harddisk or usb stick on run it from there.
thanks
johan
h.davidHi johan,
Based on your description, I understand that you want to know how install a third-party software on an external
harddisk or usb and then run this software from there. Regarding this issue, I suggest that you should contact with the third-party software support and confirm it. Since most programs use windows registry entries, and may rely on some .dll files. If all relevant
auxiliary files and configurations of this software were installed in one directory tree, you may be able to install and run it on an external harddisk or usb.
Hope this helps.
Best regards,
Justin Gu -
How to streaming data/image from labview to a third party software
Hi, i am working on a research project and stuck on the following problem: I have two cameras and one IMU Sensor unit, all conected to my PC. I save the camera images as avi format and the IMU sensor as TDMS format. I have also another software running on the same PC which i developed using VisualStudio2013. On this software i alredy implemented a very complex filter to fuse images and IMU. Now my quesion: would be it possibel to stream the .avi and .tdms from LabView to my software so I can test in real time how my filter is performing? If yes please let me know what LabView function do i have to use. thanks
Thanks, the hardware are my PC, 2 usb cameras and one usb-IMU sensor. The PC runs w7 with LabView2014. I can read the camera and IMU to my Laview without any problem and save the data on my hard desk. I am also developing another software on VS-C++ for image processing and data fusion. I would like to know what is the best (and fastest) possibility to stream this data (Images and IMU) in real time from LabView to my own software?
I read a lot in NI-website on how to communicate LabView with a third party software. They are summarized in this link:
https://decibel.ni.com/content/docs/DOC-9131
It looks for me that the ‘shard memory’ principle (or File Mapping) is the most convenient method. In VC++ under windows I can easily handle shared memory by calling FileMapping windows functions. Now the question is how can I do that in LabView? I am relatively new in LabView and do not know if it is possible to use shared memory in LabView. For example: is it possible in LabView to buffer both video streams and IMU-data (live) in a shared memory in computer RAM using the windows FileMaping functions (may be using .dll). Then I can access the RAM form my own software and read the stream. Please see the attachment for more description.
Attachments:
Unbenannt.PNG 139 KB -
Unable to link Jtext field with third party software.
Hi pals,
I am stuck in a problem which is as follows:
"I have one third party software (lightspeed) which helps one to link it to any application. Here I am able to link this app with the text field of google.com opened in a browser or in a java frame. Now whenever I type something in the text field of this app(lightspeed) and press enter, it forwards the same text to google's text field, which is working as expected. Now there is twist, whenever I link any java's textField to this app, it fails."
Now some questions which raise in my mind are:
1) Is it due to the security constraints in java?
2) Or somewhere the sockets are no been able to connect?
Guys, please help. My need is just to link this app to the jTextField.
I will be really thankful to you.
Please Help!
Amanuser8949768 wrote:
Thanks for the reply PhHein. But there may be one of the case:
1) Due to some security constraint java is not accepting third party (or say untrusted ) data.Unlikely
2) It is obvious that app is using sockets, so socket failure might be case. If yes, is there any way to track it?No way to tell without seeing stack traces or errror messages. -
How to configure Solaris that third-party software can use Netscape
Hi,
I don't know if this is Solaris configuration issue.
I have Storage Foundation installed on Solaris 10 SPARC.
And I am using the VEA GUI application to manage storage. Then I intentionally made some activities that the Error window appears with the link.
This link point to the Veritas web page.
After clicking on this link the error appears:
"Error attempting to launch web browser.:
netscape: not found"
Please tell me whether this issue is because it needs some changes in Solaris or maybe the Storage Foundation needs to be configured properly?
The internet connection works fine while executing the Netscape from CDE.
Kind regards,
DanielI don't think it has anything to do with the third-party software. When you click on a link or document, the OS tries to access it using the associated application. In your case, clicking on a hyperlink tries to load the default web browser which on your system is Netscape.
If say, you installed Firefox and configured it to be the default web browser then Solaris would launch it instead.
Try to manually launch Netscape and in the preferences, set it as the default web browser. See how you go with that.
Cheers,
Erick Ramirez
Melbourne, Australia
Maybe you are looking for
-
Hello Everybody, I have a problem concerning the following extractors : 2LIS_02_ITM, 2LIS_02_SCL, 2LIS_03_BF, 2LIS_03_UM and 2LIS_04_P_MATNR. There is no transfer between LBWQ et RSA7 : there are many data in LBWQ but no data in RSA7. All data are bl
-
Hello, (disclaimer : if you agree that this topic does not really belong to this forum please vote for a new Development Process forum there: http://forum.java.sun.com/thread.jspa?forumID=53&threadID=504658 ;-) My current organization has a dedicated
-
[Solved]Problem with Gnomad2
Hello everybody. I've a strange problem with my Creative Zen V Plus music player. I've found some topic on this forum for resolving this problem but I don't good understand the RIGHT way to resolve my problem. So when I try to launch gnomad2 it says
-
Macbook Pro not sleeping when lid closed
Since upgrading my late 2011 13-inch Macbook Pro to Yosemite, I've noticed that it does not go to sleep properly when I close the lid. While the screen does turn off, the white LED remains on at full brightness and the fans spin up to maximum speed.
-
I have tried everything I can find on this forum and the web and I cannot unlock my iPhone 4. I cannot get the "congratulations you iPhone is unlocked" in iTunes. I submitted the form to AT&T and got an email back saying they had granted my unlock r