How to load files from a hard drive to my mac?, How to load files from a hard drive to my mac?

I just got my first macbook a few days ago because my windows pc crashed. I have all my documents on the original hard drive, which I can plug into my mac. Is plugging in the hard drive just like plugging in a USB drive? Will I be able to chose the files I want on this mac, and which ones I don't? I'm very new to macs and I don't want to do anything that will potentially "mess up" my new computer.
Some of the word docs are OpenOffice files (which I shouldn't have a problem saving onto my mac because I'm downloading openoffice), but some are also MS Office files as well. I currenlty can't afford to buy the MS Office software for my mac, so I'm going for pages. Will I be able to save my MS files to Pages without any format issues? Do I need to change the format of the docs so I can open and edit them in Pages? Thanks for the help!

Checkout the below posts which are bit similar to ur requirements
UPLOADING FILES:*
http://forum.java.sun.com/thread.jspa?threadID=5217444&messageID=9881977#9881977
DOWNLOADING FILES:*
http://forum.java.sun.com/thread.jspa?forumID=45&threadID=5207674
Hope this might give you some idea...of how to go about:)
REGARDS,
RaHuL

Similar Messages

  • My 5 year old iMac's hard drive is at the point of failing.  I'm trying to save al files on it, but it wont allow backup via Time Machine to an external hard drive.  How can I keep from losing all the files and programs if the hard drive fails?

    I'm concerned that my iMac, purchased 5 years ago, is about the crash and I can't back up my files and programs to an external hard drive via Time Machine because the computer freezes after only a couple hundred MB and gets nowhere near the required amount.
    How can I save these files and programs if the computer hard drive fails or has to be replaced without the backup being able to be done? I need to do something quickly, but I'm not sure what I can or should be doing.

    Get an external hard drive, some good ones that I like are the OWC, http://www.macsales.com Mercury Elite Pro drives...they are very good and reasonably priced.
    Get the drive, connect via USB or FireWire, then use Disk Utility to format the new drive as Mac OS X Extended (Journaled), and then use Disk Utility to Restore the current drive to the new drive.  Restore actually clones the drive so you will have a bootable backup on the external drive.
    After you have formatted and named the external drive, click Restore in the main Disk Utility window, drag the name of the old hard drive to the Source box, and drag the name of the new external drive to the Destination box.  DU will make an exact clone of the internal drive on the external drive.
    That clone will be a complete backup of the operating system and all of your data.
    You can test it by restarting the iMac and hold the Option key.  That will give you a grey screen showing all bootable drives.  Just click the external drive, then click the upward pointing arrow under it and the iMac will boot from that drive.

  • I have an alias of one of my external hard drives in my trash. When I click on "show original" all my external H D 's and my Mac hard drive show up. How do I delete this icon from the trash without loosing all my files?

    I have an alias of one of my external hard drives in my trash. When I tried to delete it, it showed that I was deleting 80,000 files and counting. I stopped the delete process and when I clicked on "show original" all my external H.D.'s and my Mac hard drive show up. How do I delete this alias from the trash without loosing all my files? When I tried to drag it back to the desk top, it just made a duplicate and remained in the trash. When I turned off the external H.D., the trash was then empty. Tried rebooting the computer and then turning the external hard drive back on and the alias shows up in the trash again. Much help appreciated.
    Rich

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • MY hard drive crashed and i lost all my files. How do i move my files from my phone or ipad back to my new hard drive?

    MY hard drive crashed and i lost all my files. How do i move my files from my phone or ipad back to my new hard drive

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before.

    I had to change my Hard Drive, now I want to work on files in iWeb, but can't access Time Machine before yesterday. The dates are there on the right hand side but are greyed out before yesterday when I changed my HD. How do I access anything from before?

    Start with B5/6 in the 1st linked article.
    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems

  • Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

    Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

    If you want a cross-platform solution that doesn't require the use of third-party software, use an external drive with hardware encryption. The device will have either a physical key or a numeric keypad. I don't have a specific recommendation.

  • I need to copy audio files and projects from logic to an external hard as my MBPis nearly full and my external hard drive has packed up with all my files on it, any suggestions on how do I copy 200GB from my MBP to a new external HD

    I Use logic and back my audio file and projects on an external HD ,this has now packed up . I have all the files in the MBP , but need to copy them to a new external HD, I have only 10GB left on my machine , how do I copy 200GB from my machine to a new External HD.
    any helpful full advice would be appreciated.
    angus

    Yes, just drag and drop them into the drive..
    How long will it take? Hard to say without knowing the type and speed of the drives in question.. and even then it's hard to estimate... but does time really matter?
    The fact you only have 10 Gigs left will/may slow the process down but it wont/shouldn't stop it...
    If needed.. just drag and drop some of the files at a time.. not all of them.
    Remember that copying files doesn't delete them from the original drive... You will still need to delete them yourself after they are copied over and empty the trash....
    However....
    When you saved these projects in Logic (Pro X?) did you save them using the include audio files option?
    If not, then when you move the audio files used in these projects... Logic will not know where they are to reload them........ and that will cause you issues.
    So.. if you didn't...
    I would use this method instead...
    Logic Pro X: Move, copy, and convert audio files

  • How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

    How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
    I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
    Someone, Please help

    Hi Allen,
    Is there any way to store the back up to Mac and restore after formating?

  • I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
    Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
    Ciao.

  • Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Got a new external hard drive. Transferred all files from old hard drive to new hard drive. Connected hard drive to macbook. How do I get all my files to be recognized by iTunes and my already made playlists??

    Trying to download photos from IPHONE, IPAD to IPHOTO in IMAC after installing new hard drive.
    How did you import the photos to iPad and iPhone?
    If the photos have been synced to the iPhone and iPad using iTunes, you cannot sync them back.
    See this document:  http://support.apple.com/kb/HT4236
    You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
    If your photos are not in the Camera Roll on your devices, save them to the Camera Roll, share them to the Photo Stream, mail the photos, or, if you have iPhoto on the devices, use iTunes Photo Sharing.
    http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnkee26bc1
    Save photos to your computer using iTunes
    Connect your iOS device to your computer.
    Tap a photo, album, event, web journal, or slideshow and tap Share> iTunes.
    Tap Selected, or change the photos you want to save (if you are saving a slideshow skip to step 4):
    Select different photos: Tap Choose Photos, tap one or more photos, and tap Next.
    Select a range of photos: Tap Choose Photos, tap Range, tap the first and last photos in the range, and tap Next.
    Select all the photos in an album or event: Tap All.
    In iTunes, click the button for your device and click Apps at the top of the window.
    Below File Sharing, select iPhoto (in Apps).
    Select the Shared Photos folder under iPhoto Documents.
    Click Save To and select the location on your computer where you want to save the items.
    To view your photos, go to the Finder and look in the location you selected above.

  • How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    How do I import images from my hard drive without losing resolution? My original files after import are significantly smaller. What should I do?

    Hi Keith, and all others chiming in, I do have the correct option checked in advanced settings telling iPhoto to copy the images into the library. What is a refernced library? Perhaps this is where I am getting confused. I exported my entire photo library from an old iMac5 to my external hard drive, from there I attempted to import the entire library to my new iMac. Am I overlooking an obvious and easy way to import from the hard drive to the new iMac--I dragged the entire photo pholder from the hard drive to the open window of iPhoto on the new computer. Now, I only get preview file sizes in iPhoto, unless I have my external drive open. Perhaps I need to import the original images from the hard drive in a different way...?! (This is making me feel pretty stupid.)

  • How do I share a hard drive with the new iMac to load a disk from macbook pro

    How do I share a hard drive with the new iMac to load a disk from macbook pro. I want to install office for Mac from a disk but dont know how to share har drive from macpro
    thanks

    The new iMac's don' t have DVD drives however almost all have a disk drive. The easiest method of installing MS Office for Mac on your new iMac is to download it from Microsoft and then input the code you received when you purchased your original license. Otherwise you can use the DVD drive on your MBP to install on your iMac, that feature is called Remote Disc. Instructions for Remote Disc can be found at:http://support.apple.com/kb/ht5287

  • I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?

    Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
    If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
    (Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.)

  • How come a USB will work with both Mac and Windows (as in that there are already files from Windows and Mac can still read and write onto it) but a external Hard Drive won't (as in there are files from Windows on there but Mac can read but not write)?

    I have a Seagate Drive that I'm hoping to copy some movies from my Mac onto (because it only has a 512 SSD and I'd rather keep that empty and handy for more readily needed files) but it won't work. It shows up as a drive when connected (with the orange USB drive icon popping up) and is appropirately labeled "FreeAgent Drive", but when I try to copy files onto it it won't work. There are already windows files on there, such as some windows backups and lot's and lot's of pictures and videos. However, I have several USBs which already have windows files on them (namely movies, music, and other stuff) and copying and stuff works fine. Why won't it work with this hard drive and would work with USBs? Please help me out here guys, I am not experienced with Hard disks and formatting and stuff like that. 10 points for whoever helps me out the most. Thanks.

    We will need to reformat your EXT, but it will then work on both Mac and Win
    Connect the drive to your Mac, open disk utility
    Go to the partiton tab and select '1' ... format should be ExFAT ... in options select MBR
    Format the drive
    It should now work on both OSs; report back

  • I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
    It constantly gets harder.

  • My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

    My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

    If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
    Or you could move them to the internal drive and double-click on them once the move is completed.
    To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

Maybe you are looking for