How to look at sid tables generated for an ods?

Hi all,
There  is atrns code : listschema which enables to have a look of the sid tables generated for infocubes.
Is there any trsn code where we can see the list of sid tables generated for ods. if not let me know the procedure how to look at the sid tables generated for ods.
regds
hari

hi,
i think u will try like this:
go to transaction code SE11
TYEP UR NAME LIKE THIS:
EX: /BIC/AODS_CUS00XXXX
BI: MEANS business defined
C: customer
0 : SAP defined
A: Active data table of ods
TYPE LIKE THIS : /BIC/ODS NAME * (STAR)
YOU MAY GET VALUES:
THANKS, KR

Similar Messages

  • How can we delete SID table data and Text table data

    Hi,
    How can we delete SID table data and Text table data of any
    InfoObject.

    Hi,
    Go to transaction SE14, give the technical name if the table:
    /BIC/T<InfoObject Name>   for Text Table
    /BIC/S<InfoObject Name>  for SID Table
    Select "Table" in the given 4 options below  &  hit Edit button.
    in the next screen select "Direct"
    & also select "detele data" radio button.
    & hit  "Activate & adjust database".
    this will delete the complete data from the tables.
    Note: before deleting the SID's make sure of the consequences & after effects.
    Also the SID gets generated the next time you load master data/transaction data only for those records which were loaded..
    Regards,
    Iliyas

  • How to find out the Queries Generated for a particular ods?

    Hi all,
    There are atleast 10 queries generated for a Particular ODs zyyyyy. I would like to know what are the queries generated for a particular ods.
    I have used the where use list of the ods. But it did not displayed the queries generated for that ods.
    I have looked at the bex query for that ods but cant find any query being generated on that ods??
    Is there any way to find out what are the queries generated for a particular ods?
    thanxs
    haritha

    Hello Haritha,
    Please follow the path.
    Go to RSA1 -> Metadata Repository ->DataStore Objects(ODS) -> Find you DSO(ODS) there and click on that, you will get all the details(Queries, Objects - Char, Key figures, update rules,etc..) related to that particular DSO(ODS), same is the case for Cube as well.
    Please assign points.

  • How can I activate the transfer rules for the ODS updating a data target.

    We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS  and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
    I then Replicate the datasource 80FIGL_O01.
    I must then <u><b>'activate' the transfer rules</b></u>.
    However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
    How can I activate the transfer rules for the ODS updating a data target.
    The error text is as follows:
    DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 02/15/2007 10:42:33.
    The time stamp in the BW system is 11/07/2006 13:11:54.
    System response
    The load process has been terminated.
    <b>Procedure
    Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
    Thanks for your assistance.
    Denny

    Hi Dennis,
           Try, using Business Content to activate your data source
           hope this will help you
    How activate business content?
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

  • How Bex flageffects internally effects the SID table entries for Master Dat

    Hi Every one,
    I do understand how the Bex flag setting works in relation to reporting like y we set the flag or y we dont set the flag when we do reporting or not on ODS.. <b>My question here is, i dont understand, how the SID tables or the master data tables or ODS tables get effected with this flag. Can some one explain me what kind of changes in the tables takes place with this flag setting and how it is used in the reporting..</b> How this thing is different with respect to Cube reporting process.. I do understand that ODS doesnt have Dimensions.. so i am just looking for conceptual clarification and not any forum links related to the Bex falg.. i have already gone through many links in the forum, but they didnt help me to clarify this process at table level which i am looking for... ANy help will be highly appreciated in SDN way..
    regards,
    kishore

    Thanks Durgesh but I have tried every master data test in RSRV.  I think because these document number characteristics don't have master data tables most of the tests return a message that the test does not apply to the characteristic.  These characteristics only have a sid table.

  • How to find all the tables associated for a particular transaction

    Hi-
    May I know how to find all the tables, related(foreign key) tables for a transaction within SAP GUI?
    Up to my technical knowledge, this can be achieved by looking database diagrams from DB level. But that would be for entire database as a whole. What I'm expecting is to see transaction level relative tables that too from SAP GUI. Please share the possibilities if any.
    Regards
    Sekhar

    Dear Micky Oestreich
    May be we possess expertise or high level experience, it should not show up in our way of communication. Every professional starts with the basic stuff to learn. When the question is raised in such minimum polite way, the same level of courtesy is expected in return. If you felt my question was basic, you might have refused it gently. If you are in good mood or bad mood it doesn't matters.
    Hi Vengal Rao
    Thanks for your response. It helped me.
    Regards
    Sekhar

  • SID 's generated for characterstics

    Hi all,
    Is there a limit to the SID’s that gets generated for characteristics in SAP BI(and if yes,how many)
    Pls let me know.
    Thanks in advance.

    Hi Pallavi,
    As mentioned earlier, there is no limit for the SID's.
    To view the SID # range, go through the following path:
    InfoObject>Right Click>Change>Menu>Extras>Number range Object>SID
    To change the number range object for SID
    Use T-code SNRO
    Please assign points if this is helpful.
    Regards,
    Rahul

  • How to add column in table control for transaction APPCREATE

    Hi All,
    How can i add the additional column in table control for transaction APPCREATE.
    There is structure PT1045_EXT present behind table control. But not found any customer exit or badi to display on screen.
    Please help...

    You can add new columns
    If you add new columns in tr. PHAP_CATALOG

  • How to see the wrapper classes generated for CMP 2.1 in jdeveloper10g

    I have developed CMP entity bean (2.1) using jdeveloper wizard. I want to see the wrapper class generated for the bean. How can I do that in jdeveloper 10g.

    No you got me wrong. I wan't to see the actual implementated classes (extended from the generated bean) by the container. ie the ones that actually run in the container.
    rgds,
    Jatin

  • How to prevent Output to be generated for Return Purchase Order.

    Hi All,
               while creating a return Purchase Order the output is getting triggered. Now for Return Purchase Order the business does not want the output to be generated.
    So is there a way by which we can have the automatic output generated for normal Purcahse Order but not for Return Purchase Order.
    The system uses standard Output Type NEU for message. And condition record maintained for generating output (print/email) while saving.
    Is there a way by which this issue can be addressed.  if so how ?
    Thanks.

    Dear all ,
    a material goes storage location to client  through pr ,in client site i get faulty material
    i want to retorn that to my plant or storage location
    that basis how to make retorn po and what are the procedure ?
    what is movement type ?
    Regards
    shiv

  • How to look at standard Busniess content for AP

    Hi Gurus,
    We are on ECC 6.0 and BI 7.0
    Can you please tell me how to look at the stantard business content deliverd by SAP so that I can know what cubes and queries are delivered.
    Thanks
    Prasad

    http://help.sap.com/saphelp_nw70/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
    In ECC --> RSA5
    SAP R/3 --> FI --> FI-AP

  • This table is for what ODS? /BIC/B0000357000~0

    Hello,
    I have a table name on BW.  I found it by seeing its size in DB02, it is one of the largest tables.  I want to track it down to see what it is for.
    /BIC/B0000357000~0
    How can I find out what PSA or ODS this table belongs too?
    Thanks,
    Nick

    Hello Nick,
    I found in this way,
    Goto Tcode SE84 ->Abap Dictionary -> Database Tables -> Short Description -> Transfer Structure Application*  and execute this will list down all the change log tables.
    For individually seeing the objects goto se11-> Put table name /BIC/B0000357000 and look for the description of the table . From the description you should able to make out to which ods this changelog belongs to.
    Hope that helps.
    Regards
    Kapadia
    ***Assigning points is the way to say thanks in SDN.***

  • How to add rows in table control for data recording BDC?

    hello,
    pl tell me the way to upload data through BDC in table control of screen .
    how to add fields inrecording of table control?
    Please give some code in this regard.
    I am generous in giving points..pl help!

    Hi,
    While doing code under recording first you need to do the recording with sample data under a particular transaction like T-code XK01 (Vendor creation).
    Take an example of create vendor using T-code XK01:
    Go to t-code 'SHDB' under make recording for XK01 with sample data and once if you complete the recording means after vendor creation check the source code bye by pressing the button  'Program', it shows the total coding for recording of what you entered the test data.
    Then you will create one program and copy that source code of recording into your program, and now you have to remove the values at perform statement and give the internal table field name.
    Like that you can develop your own code along with your validations.
    my best suggestion is don’t see the example code of recording method because any one for standard t-code should get the code from recording with sample data, so first tryout with your own recording method and you can understand the code step by step.
    With these I hope you will get some idea of recoding method.
    Let me know for further doubts.
    Regards,
    Vijay.

  • How to use dynamic internal table with FOR ALL ENTRIES

    Hello SDNers,
    I am having a dynamic internal table & want to use FOR ALL ENTRIES(FAE) using this dyn. table.
    This works fine for me:
    IF <lt_tmp> IS NOT INITIAL. "<lt_tmp> is my dyn. internal table
            SELECT field1 field2
              FROM TABLE ztable
              INTO TABLE itab "Itab is a static table
              FOR ALL ENTRIES IN <lt_tmp>
              WHERE (lv_dynwhere). "lv_dynwhere -> dynamic where clause
          ENDIF.
    SAP documentation says:
    "The logical expression sql_cond of the WHERE condition can be comprised of several logical expressions using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one comparison with a column of the internal table itab that can be specified statically or dynamically. "
    How do we specify the column of the internal table dynamically ? Can we do something like this:
    IF <lt_tmp> IS NOT INITIAL. "<lt_tmp> is my dyn. internal table
            SELECT field1 field2
              FROM TABLE
              INTO TABLE itab "Itab is a static table
              FOR ALL ENTRIES IN <lt_tmp>
              WHERE key_field1 = (dynamic token for column1 of <lt_tmp>)
                           key_field2 = (dynamic token for column2 of <lt_tmp>)
          ENDIF.
          ENDIF.
    Let me know if i am not clear about my requirement.
    BR,
    Suhas

    Hello Thomas,
    What i meant was something like this:
    WHERE key_field1 = ('<LT_TMP-COL1>') AND
          key_field2 = ('<LT_TMP-COL2>')
    I am confused by what SAP means with "dynamic representation of internal table columns" in FAE ?
    @Rob: I was referring to SAPNW 7.0 documentation & the phrase (release 6.40 & higher) is missing. Anyways fyi i am on ECC5.0 ABAP release 6.40.
    @Subhankar: This is what Marcin had proposed in For all entries and dynamic table.
    Thanks,
    Suhas
    Edited by: Suhas Saha on Apr 6, 2010 11:53 AM

  • How to restrict Intercompany Invoice getting generated for receive only trn

    Hi All,
    I have a businesss scenario, where there are two operating units (A and B) Intercompany shipping relationship is set between these two OU's
    Operating Unit: A and Inventory Org: ZZ
    Operating Unit: B and Inventory Org: DEF
    1. If I have Sales order from A and shipped from B OU Inv org(DEF Inv org) , IC AR and IC AP gets generated and also End customer Invoice in A OU gets create
    assume the above order was for 10 Qty shipment
    at Inventory Logical transactions will be created in ZZ Inv org for 10 Qty shipment
    now if the customer comes backs and says you have shipped 12 Qty and returns the 2 Qty, here we dont send any credit Invoice to customer so RMA Order line type is Receive only when you raise RMA order in OU A aganist DEF Inv org (OU B) and you receive the goods in DEF, system creates logical transactions in ZZ inv org which is in OU A and forcing to create IC AR and IC AP in both the OU's, how to restrict the same
    Ideally its extra shipment done from DEF ware house and they are receiving back
    Thanks in advance
    Regards
    Krishna

    Hi All,
    I have a businesss scenario, where there are two operating units (A and B) Intercompany shipping relationship is set between these two OU's
    Operating Unit: A and Inventory Org: ZZ
    Operating Unit: B and Inventory Org: DEF
    1. If I have Sales order from A and shipped from B OU Inv org(DEF Inv org) , IC AR and IC AP gets generated and also End customer Invoice in A OU gets create
    assume the above order was for 10 Qty shipment
    at Inventory Logical transactions will be created in ZZ Inv org for 10 Qty shipment
    now if the customer comes backs and says you have shipped 12 Qty and returns the 2 Qty, here we dont send any credit Invoice to customer so RMA Order line type is Receive only when you raise RMA order in OU A aganist DEF Inv org (OU B) and you receive the goods in DEF, system creates logical transactions in ZZ inv org which is in OU A and forcing to create IC AR and IC AP in both the OU's, how to restrict the same
    Ideally its extra shipment done from DEF ware house and they are receiving back
    Thanks in advance
    Regards
    Krishna

Maybe you are looking for

  • Access a mc or textfeild from a non document class.

    Hey all. This use to be simple in as2, but seems to allude me from as3.  It used to be simple to access an object you put on the stage like a mc or dynamic text field by simply using _root.instanceName ect.  Now I see references to making references

  • SQL Statement Dump

    hi We are getting the following sql statement dump, and i am not able to understand what should be done here, would anyone please advise Registered qb: SEL$1 0xc4c8a150 (PARSER) QUERY BLOCK SIGNATURE signature (): qb_name=SEL$1 nbfros=1 flg=0 fro(0):

  • After syncing my iPod touch in iTunes, I find that nearly all of the songs on my iPod have disappeared.

    I plugged my iPod into my Windows 7 computer for it to charge.  When I went to listen to music, it told me I only had 11 songs on it, when just moments before it had over 300.  When I checked my music on the iPod itself, I had a different list of son

  • 802.1x supplicant authentication using a wired LAN.

    We are in the process of creating a test enviroment to test 802.1x within our organisation. We have a mixed Windows/OSX client enviroment and a W2k3 backend structure (Active Directory, Radius). Phase one of the testing invloves wired only connection

  • Error while trying to update to 7.5

    I'm trying to update my iTunes to 7.5 but it said there was an error and to just download and install manually but there's an error saying Invalid Drive: H:\. So yea, any suggestions and help is much appreciated.