How to maintain value in table CAWN

hello experts,
I wanted to ask how will i maintain the table ATWRT in table CAWN.
Please help.

hello everyone,
Question? When i maintain the alcohol base value in material master will it automatically update the table CAWN? coz i have a problem regarding this, i maintained the ABV% in the material master but when i created delivery for this material then preview the output type the ABV% value does not display. When i check in the table CAWN this value does not exist (this is where the the output type gets the value for ABV%). If this value should be defined in the table where will it be?...
Please help... need solution ASAP please.

Similar Messages

How to insert values in table control & how to place listbox in table ctrl

Dear all,
            I have created table control in Module pool program. My requirement is first
               1)How to place list box in table control
               2)Based on listbox selection i have to enter values in table control row..
With Regards,
Baskaran

Hi Baskaran,
For displaing list box, use FM: VRM_SET_VALUES.
Code like that:
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
PARAMETERS: ps_parm(10) AS LISTBOX VISIBLE LENGTH 15.
Instead of parameter for module pool , you declare data:
AT SELECTION-SCREEN OUTPUT.
name = 'PS_PARM'.
value-key = '3500000002'.
value-text = '3500000002'.
APPEND value TO list.
value-key = '3500000003'.
value-text = '3500000003'.
APPEND value TO list.
name = 'PS_PARM'.
value-key = '3500000004'.
value-text = '3500000004'.
APPEND value TO list.
name = 'PS_PARM'.
value-key = '3000000007'.
value-text = '3000000007'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = name
      values = list.
make the necesary change for module pool.
Hope this can solve your problems.
Regards,
Tutun

How create a Value Mapping Table in XI 3.0?

Hi:
    I wish make a single sample scenario where receiving data must be converted according to convertion table:
01 -
       Legacy A | Legacy B -
M
             Male:              01     |    M
             Female:            02     |    F
And I don´t know how build it. Must I create anything in Integration Repository? (any special message mapping or function?).
Anyone know about weblog where explain step by step for "value mapping group" and "value mapping tables" creation?
Help me please.
Regards!!
David.

Hi David,
You can create value mapping tables in Integration Directory.
First you have to create Value mapping group using menu Object>new>Value mapping Group
to Display value mapping you have to use Tools--> Value mapping.
Also refer to following link on help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/content.htm
In IR Graphical mapping tool, use the standard function Conversions-->Value mapping.
Hope this helps.
Rgds,
Sam Raju
Message was edited by: Sam Raju
Message was edited by: Sam Raju

How to maintain variant in table RSRPARAMETRIZA?

Dear Experts,
I have to maintain variant in table RSRPARAMETRIZA via ABAP Program. Some thread in SDN advice the class CL_RSR_PARA but I don't know how to use this class to update the field "Content of Variant" in table RSRPARAMETRIZA.
Please tell me the class or function that can update the variant?
Thank you,
Zilla D.

Hello Narendar,
Check the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/45/adee2396f711d1b46b0000e8a52bed/frameset.htm
Also, a table control wizard in Screen Painter(SE51) exists, which takes you step by step through the Table Control generation and also creates code, so you can start using the Table Control right away.
You can either specify a database table, or use an internal table from program.
If you want to use internal table, it needs to be predefined in your program, before you start creating the table control.
Reward if helpful.

How to maintain gap between table and graph in a report

HI,
I have a report in which a graph is placed below a table and data in the table gets increased with time , then how to maintain the gap as constant between table and the graph ?? Like i have 50 rows in a table and then next day 10 rows are added but then i want maintain same gap between the table and graph???

>Right click on chart.
>Open the property and go to the relative position.
>Select the distance of the upper left point of the chart in relation to another report element by entering - the number of pixels; the part of the tavfrom which youble want to measure the pixels (in the first drop-down list); the report element from which you want to measure the pixels (in the second drop-down list).
>Repeat this for the distance of the lower left point of the chart.
Hope this will help you out.

How to access value mapping table in xi ?

Hi All,
i want to load all value mapping table data from XI to a excel sheet. how can i do it ?could anyone provide java code needed for it ?

Hello
Maybe you could extract it via the Integration Directory Webservice Programming Interface...
Check this link:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/6dca42e5c269dfe10000000a11466f/frameset.htm
There is a section for Valuemappings there. Apparently it would be a matter of calling the corresponding webservice with the GUID of the valuemapping and it returns the data.
Good luck and please tell us if it works!
-Sam.

How extract a value from table?

how extract a value only from table with labview 5.0?

Hi T4l
I modified you VI to extract a selected row from the table. This is quite simple by done by using the index array function. Hope this helps
B Bakels
Labview CLD , Engineer/Manager
Promedes and DSM
using LV 7.1, 8.0, 8.2, 8.5 and 2009 SP1
http://www.promedes.nl
Attachments:
Untitled 2.vi ‏16 KB

How to select values frm table giving the condition value at runtime in SQL

Hi All,
How to select values from a table by giving the condition value at runtime in SQL
My SQL statement is select * from employee where empno=<empno>, this empno I want to provide at run time. Also I don't have any bind variables defined. Can anyone please tell how can I achieve this. Also do I have to write a SQL or pl/sql statement.

Hi Roshni Shankar,
You can use substitution variable in case of SQL.
SQL> select * from employees where emplployee_id = &emp_id;
Enter value for emp_id: 100
old 1: select * from employees where emplployee_id = &emp_id
new 1: select * from employees where emplployee_id = 100If you want to put condition on varchar values then eighter provide values in single quotes or use single quote for substitution variable.
SQL> select * from employees where last_name = &emp_name;
Enter value for emp_name: 'King'
old 1: select * from employees where last_name = &emp_name
new 1: select * from employees where last_name = 'King'
no rows selected
SQL> select * from employees where last_name = '&e_name';
Enter value for e_name: King
old 1: select * from employees where last_name = '&e_name'
new 1: select * from employees where last_name = 'King'In case of pl/sql you can pass values to procedure and you can use those values at run time.
create or replace procedure test (p_emp_id number)
as
 v_last_name varchar2(100);
begin
 select last_name
 into v_last_name
 from employees
 where employee_id = p_emp_id;
 dbms_output.put_line(p_emp_id ||' -> '||v_last_name);
end;
show errors
SQL>exec test(100);
SQL>exec test(101);Edited by: Gaurav Bhide on Oct 29, 2012 4:07 AM

How to attach value range table to dropdown list box

Hi there,
could u please explain me how to attach a value range table to dropdown list box (i.e I/O box with dropdown attribute as list with key).
if possible please explain me with a sample code.
Thanks in advance.
-Tulasi.

hi ...if the associated domain of the field that u are using as i.o field has value range the same will come as drop down list...u u select the list box option and click from dictionary check box on the attributes...
To check if the domain has it or not...go to the domain..click on value range..u can see thr,...if values are not thr u can giv the same...
Or if u are not refering to dictionary type then use fm VRM_SET_VALUes
reward if the abv is helpful..

How to maintain space between table and header in ssrs

Hi Everyone,
I have created a report. In page header of this report, On First Page space between header and
body is good , but from next page, space is not maintain.
Please suggest me how to maintain space at every page of report.
Thanks.

Can you post a screenshot?
This can be achieved if you are repeating column headers on each page. Just change row height of header and align text to bottom, and make sure there is no space between Page Header and Tablix.
- Vishal
SqlAndMe.com

How to Maintain Values in the Table control?

Hi,
I'm Saikumar.
I've done a table control program.
When I click SAVE or ENTER Button, the values are getting saved into the database(This is working alright)......but when I click those buttons, The values entered in the table control are getting cleared.
What should I do in order to have those values in the table control itself when I click SAVE/ENTER? (I need to create multiple records at a time)
What I've done is:
IF sy-ucomm = 'SAVE' OR sy-ucomm = 'ENTR'.
INSERT into <database table> values wa_matgl.
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
Refresh it_matgl.
endif.
I tried many ways but the vales are getting cleared in the table control? (I need to create multiple records at a time).
Please suggest a way to overcome it.
Thanks in advance,
saikumar

Hi ...
Just to add...
were there any values in the internal table it_matgl initially in the PBO screen to be shown to the users ?
if the answer is no...then......
i came across the same coding in DEMO_DYNPRO_TABCONT_LOOP_AT.....
here also in PAI..when we press enter..the values are not retained...
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
because i believe the modify statement is not working.coz the it_matgl is empty..pls check if sy-subrc = 0....after the modify statement....if it is not...then we need to insert the data into the it_matgl using an append statement
for this it_matgl needs to be with header line...
Pls explore the following....
data : it_matgl type table of XXXX with header line.
in the section
IF sy-ucomm = 'SAVE' OR sy-ucomm = 'ENTR'.
INSERT into <database table> values wa_matgl.
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
if sy-subrc <> 0.
move corresponding wa_matgl to it_matgl.
append it_matgl.
clear it_matgl.
endif.
endif.
Pls check and revert
Regards
Byju

How to insert values in table using ADF Task flow? I am not able to bind CreateInsert on my first page fragement

Hi,
In Jdeveloper 12c I am trying to create a task flow where I have taken 3 pages to insert values in a table. On first page when I put data control of 2 columns as input with label, then on bindings tab I created an action as CreateInsert.
Now when I am trying to create invoke action in executables then this option is not available.
How can I create this task flow where values can be inserted in the table on the 3rd page fragment on commit button???
All 3 pages have data control input boxes to insert values in the table.

Hi,
Right click on the task flow page activity, click create page def and add there. If your activity is a page, then you can select the page and generate the pagedef as well.
Then you can add the executables.
Thanks.

How to maintain data in table control

plz send a detail description of how to create table control and maintain data in that table control.

Hello Narendar,
Check the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/45/adee2396f711d1b46b0000e8a52bed/frameset.htm
Also, a table control wizard in Screen Painter(SE51) exists, which takes you step by step through the Table Control generation and also creates code, so you can start using the Table Control right away.
You can either specify a database table, or use an internal table from program.
If you want to use internal table, it needs to be predefined in your program, before you start creating the table control.
Reward if helpful.

How to pass value in Table import parameter of an RFC

Hi all,
I have an RFC in which import parameters are in the form of a table
so now when i imported that RFC in my webdynpro application and Apply Service Template to it, it created the structure but when i applied form template to it all the inputfields were readonly
and also when i tried to set the input parameter of that table like:
wdContext.currentBAPI_CREATEElement.set<field>("value");
it shows null pointer exception
MY Context structure created after service template is as follows:
Model Node Zcreate_rfc, it icludes another model node
BAPI_CREATE, and it then includes the input parameters
Please tell me how to solve the problem

Suppose the RFC is called ZRFC, and the table structure is called TableStruct, then this works for me (in execute method before calling execute):
ZRFCInput input = wdContext.currentZRFCElement().modelObject();
// these are regular import parameters
input.setAaa(aaa);
input.setBbb(bbb);
if (input.getTableStruct()!=null) {
 input.getTableStruct().clear();
// In this loop table rows are added
for (int i=0; i<sourcList.size(); i++) {
 ZTableStruct table = new ZTableStruct();
 table.setDdd(((SomeBean) sourcList.get(i)).getDdd()); // for property ddd
 input.addTableStruct(table);
Good luck, Roelof
Edited by: R. Knibbe on Jan 23, 2008 3:25 PM

How to compare values in table control

Hi Experts,
How to compare two values of a field in table control. Like the frist row of feld1 with the second row of field1.
because when ever two values are same i need to display error message that we are entring duplicate entry.
i have been tring for a very log time but not getting any solution for this.
Thanks and Regards,
Ashwin.

you need to write in code for this..
A possible solution is given below..
Suppose your internal table fields are col1 and col2.
in the loop .....endloop of yout internal table in your PAI..there will be following(if your table control is made using wizard. otherwise you might have to add it..
loop at itab.
chain.
field col1.
field col2.
"some module
endchain.
endloop.
now make changes as shown to the above code..
loop at itab.
chain.
field wa-col1.
field wa-col2.
module table_modify on chain-request.
endchain.
now in your program add module table modify.
module table_modify input.
read table itab with key col1(which shud be unique) = wa-col1 transporting no-fields.
if sy-subrc = 0. " there exists another record with the same value
message e001(your message class).
endif.
endmodule.
i guess that shud work. get back if it dosnt.
regards
Suzie

How to maintain value in table CAWN

Similar Messages

Maybe you are looking for