HOW to make 2 step Communication strategy for external send

Hi
I have made this 2 step communication strategy and attached to an email output type for purchase order, but it doesn't work as expected.
The 2 steps are 1 INT, 2 = PRT
If the vendor/supplier has an email in the address the purchase order is send by email, but if he has no email addres, then the output fails with message "E-mail address incorrect or non-existent"
I expected the result to be that it would create a print instead of an email.
What is wrong?
Thanks.
Thomas Madsen Nielsen

I found the solution myself.
The communication type PRT = Print is not supported, but LET = Letter will do exactly the same thing.
I found the answer in OSS note 323720.
Thanks

Similar Messages

Communication strategy missing for external send

Dear all,
I want to send O/Cs via mail, therefore I configured the transmission medium of the output type to "external send". As well I set the communication strategy for mail to the output type. Nevertheless I receive an error, when I want to save the O/C with a new message. Please be so kind and take a look at the attached screenshot. Do you have any idea why the error occurs?
Best regards,
Benjamin

Hi Susan,
Please be so kind and take a look at the SAP-note 2017440 - Communication strategy cleared in message output . In my case this solved the problem.
Best regards,
Benjamin

How to have make to stock strategy for configurable items

Dear Frndz,
My client would like to have make to stock strategy for their configurable items, pls help me out with the step by step procedure of the same.
Regards,
Srini

Hi
K-Mat Creation steps
1) Create Char in CT04 with assignment of Control indicators and Char values
2) Create Class in CL02 with type 300 and assign the Char to it
3) Assign this class to Material in Classification view in MM02
4) Create Configuration Profile in CU41 and Main Profiles for PP & SD relevancy
5) Assign Constraints and Procedures to Each Profile as per the rules required by design or Business
6) Create a Configurable Material (Mat type - KMAT) with Classification,Sales,MRP,Accounting views and Planning stg 25
7) Create A Super BOM(for K-mat) and assign all the comp with Proper Selection & Pre conditions
8)Create Super Routing(For K-mat) and Assign all operations with Proper Selection
Material Variant(MV) Creation Steps(Material variants are the stockable items in VC Scenario)
1) Create a MV with Material type FERT and Stg 10 or 40 (Classification view not essential)
2) Assign the K-mat material to this MV in Basic data - 2 view in Cross Plant CM field and click on Configure variant tab to select the fixed char value combination for this MV. Do the same steps in MRP-III view
By this way u can make the stock of configure items
Regards
Brahmaji

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

How can i create a Trash for external USB Drives ?

Hello,
how can i create a Trash for external USB Drives or my TimeCapsule ?
Thanks.

You do not need to create trash cans for individual drives. The trash can on the desktop holds deleted files from all mounted drives.
TimeCapsule manages its own space. If it fills up it will delete older backps to make space for newer ones.

PA04-How to make existing Number Range/interval external.

Question: PA04-How to make existing Number Range/interval external.
One of the Pernr Number ranges/interval in PA04 is Internal(box is
unchecked) and i want to make it "External" (check the box) to load some data.
Issue: The issue is, the check box is Greyed out and i can not check it. But i have access to
everything else in PA04:
- create and delete number ranges
- change the "Current number"
- Uncheck the box to make the External to Internal.
But i can not Check the box to make it External from Internal due to the greyed
out box for this number range.
The only solution i can think of about it is to - Delete the number range
and add it again and check the box when doing that. And once the Data load is done Uncheck the box.
Is there a better option..?

Once you have made your decision to define a number range as 'internal' it is not possible to reverse this. check this http://scn.sap.com/thread/1976017

How to make a communication of two VIs from difference computers throught VI server?

how to make a communication of two VIs from difference computers throught VI server?
I have built the program which is attached at below. But it doesn't work. Can any one help me?
Attachments:
panel5.vi ‏82 KB

Hi Barry,
What do you mean "it doesn't work"? What kind of errors are you seeing? Also, you only specified the file name (data.vi) when opening a VI reference. Try specifying the whole path to the VI. Also, you might want to make sure you are able to ping your other computer from the start (to see if this is a LabVIEW issue or a network issue).
Hope this helps,
Travis H.
LabVIEW R&D
National Instruments

How to make a good referencing for my web site

hi. i start with muse and would like to know how to make a good referencing for my web site; thanks for your answers...

Google and search the forum for: SEO or Search Engine Optimisation

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

How to make jar files availabe for deployed EJBs

Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar to the
classpath, but I think that shouldn't be the way. Is there somthing in the admin
console to make jars available or do I have to insert it in the ear file? And
if so, where do I hve to place it?
Thanks
Claudia

Put the util.jar in the ear with your ejb jars - at the same level (i.e. in
the root) - but do not include them in the manifest.xml.
Also each ejb jar that refers to util.jar must have util.jar on its internal
classpath in the manifest.
"Claudia" <[email protected]> wrote in message
news:3d537db5$[email protected]..
>
Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar tothe
classpath, but I think that shouldn't be the way. Is there somthing in theadmin
console to make jars available or do I have to insert it in the ear file?And
if so, where do I hve to place it?
Thanks
Claudia

How to make a group contacts for iphone 4s, How to make a group contacts for iphone 4s

How to make a group contacts for iphone 4s

Or there are apps
https://www.google.co.uk/url?sa=t&source=web&cd=3&ved=0CEEQFjAC&url=https%3A%2F% 2Fitunes.apple.com%2Fgb%2Fapp%2Ftext-2-group-fast-sms-imessage%2Fid519077434%3Fm t%3D8&ei=WCkfUc6vE8THtQavlYCoBw&usg=AFQjCNHnoWUqJ9AMYWCadVceOkq-6Ed4Vg

How to make the logs captured for Z fields in ME21N/ ME22N

Hi
I have devloped new tab(Screen) and added Z field in the PO header (ME21N) as per my requirement. But whenever I do changes to the perticular Z field, logs are not captured (ME21N->ENVIRONMENT-->HEADERLOG). How to make the logs captured for Z fields like standard fields. Is there any way?
Regards
Raj.

HI Ranjitha
For the data element of Z fields go to further caracteristics of tab and make change document checkbox ticked.

How to make a portlet unvisible for another(not Owners) Users?

Hi all,
I (Site-Owner) have create a little Portal-Site with any portlets.
I want to make one or two portlets(Admin-Area) unvisible for other users. But when I create a portlet as Site-Owner, then all another users can they see.
How to make a portlet unvisible for another users?
Regards
Leonid Pavlov

You can hide and show portlets of Web providers (OmniPortlet, Web Clipping, and Java portlets) on portal pages dynamically. This functionality is controlled by security managers. The PDK provides a number of security managers. For example:
o Group security manager: The group security manager makes the portlet appear to users who are members of a specified group, while hides the portlet for those who are not members.
o Authentication level security manager: You can use the authentication level security manager to control access to the portlets based on the users authentication level. For example you may hide the portlet from public users, but display it to authenticated users.
In addition to the security managers provided by the PDK, you can build your own security managers.
Although OmniPortlet and Web Clipping do not expose security managers through the user interface, you can apply them by editing their XML provider definition file.
For PL/SQL portlets you can use the is_runnable method to control whether the portlet is hidden or shown.
Peter

How to make a loop run for specific period of time ?

hello !
i'm new to labview and could'nt found how to make a loop run for 2 sec for example, and then to exit.
Solved!
Go to Solution.

Hi Hookso,
You can do it using the different loops like While loop and For Loop. Roderic has already stated how to do it using a for loop. I have illustrated in the attached vi how to do it using a while loop and Elapsed Time function. Take a look.
Regards,
Nitzz
(Give kudos to good Answers and Mark it as a Solution if your problem is Solved)
Attachments:
Untitled 2.vi ‏36 KB

HOW to make 2 step Communication strategy for external send

Similar Messages

Maybe you are looking for