How to make a Java Applet work beyond proxy?

Hi All,
I have problems with my applet working through proxy.I am using a client applet which makes a socket connection to a Java application running on the same pc as the web server.
Everything works fine when I am directly connected.However it does't work when connected through a proxy? I am using object o/p & i/p streams for the exchange of data b/w client applet & the server java application.How do I overcome this problem.
Currently I am using WinGate 3.0.2 as my proxy(I did't see any firewaal setting there) but I intend to make applet work through any proxy for that matter.Using a higher level protocol such as UDP would help in this regard?
This is urgent.PLease reply ASAP...
best rgds,
prithvi

Try to use http, i don't thing direct open the socket can pass throught the socket if your proxy haven't forward those ports~
Hi All,
I have problems with my applet working through
gh proxy.I am using a client applet which makes a
socket connection to a Java application running on the
same pc as the web server.
Everything works fine when I am directly
ly connected.However it does't work when connected
through a proxy? I am using object o/p & i/p streams
for the exchange of data b/w client applet & the
server java application.How do I overcome this
problem.
Currently I am using WinGate 3.0.2 as my proxy(I
(I did't see any firewaal setting there) but I intend
to make applet work through any proxy for that
matter.Using a higher level protocol such as UDP would
help in this regard?i think UDP/TCP is not the matter for that!
This is urgent.PLease reply ASAP...
best rgds,
prithvi

Similar Messages

How do I get Java Applets working on FF4 Mac?

My website's photo upload applet uses Java to upload, and ever since FF4 beta releases, all the way up to the final, I get a missing plugin error. This error is ONLY on FF, it works on chrome and safari.
Screenshot:
http://img23.imageshack.us/i/javad.png/
Clicking manual install goes to:
http://www.oracle.com/technetwork/java/javase/download-138376.html
So in other words, the manual install is pointless.
How can I get these applets working?

PS. I'm downgrading till this is fixed. FF4 is useless to me without this ability. I always liked FF for the better upload ability over Safari and Chrome, so I'd love to be able to use it. :-)

How do I get Java to work on my Mac Pro?

I have the latest version of Java downloaded on my Mac, but when I play certain games on Pogo, it says it can't detect it. How do I get Java to work?

That is a link to a FAQ page with these answers:
» Can I restore Apple Java 6 after uninstalling Oracle Java 7?
» What are the system requirements for Java 7 on my Mac?
» Why can't I use Chrome with Java 7 on my Mac?
» How do I get Java 7 for my Mac?
» How do I know if I have Java installed on my Mac?
» How do I install Java 7 for my Mac?
» How do I find out what version of Java I have on my Mac?
» How do I enable Java on my Mac?
» How do I clear the Java cache on my Mac?
» How do I update Java on my Mac?
» How do I uninstall Java from my Mac?
» I do not have Mac version 10.7.3 (Lion) or higher. How do I get Java for other Mac versions?
» Why will Applets not run after getting Java through Apple Software Update?
» Why is Java 7 available only for Mac OS X 10.7.3 and above?
» How do I get support or provide feedback on Java?

Simple introduction/tutorial on how to make Cocoa-Applescript Applets?

I'm looking for a simple tutorial on how to make Cocoa-Applescript Applets. I'm pretty new to Applescript, but fairly good at it, and I was wondering how Cocoa-Applescript Applets worked. I was curious as I've been wondering if it was possible to somehow display images in Applescript, and it apparently is the only/easiest way. My problem is that I haven't been able to find any tutorials on using it, so I was wondering if you guys could point me in the right direction, that'd be great!
thanks in advance

The main difference is with how the Cocoa APIs are used - in addition to the AppleScript and AppleScriptObjC release notes, there are some examples and resources at Mac OS X Automation. Note that in Yosemite, AppleScriptObjC is available to all scripts, not just applets and libraries.

How to make a Java program that recognises a function of two variables...

How to make a Java program that recognises a function of two variables to assign values to that?
First I will give an example and then do the question.
Ex1.
We have any function, eg.y = x ^ 2 + 1 (read 'y' equals 'x' high to the square), a function of the second degree.
To build the graph of this function attach values to 'x' to find the values of 'y'
And thus mount the pair ordered (x, y) which represents a point on the Cartesian plane.
Assigning values to 'x' 'we can build up a table that gives us the pairs ordered:
We can use any numbers, but arfer interval [-3.3]
X | y = x ^ 2 + 1
-3 | Y = (-3) ^ 2 +1 = 10
-2 | Y = (-2) ^ 2 +1 = 5
-1 | Y = (-1) ^ 2 +1 = 2
0 | y = (0) ^ 2 +1 = 1
1 | y = (1) ^ 2 +1 = 2
2 | y = (2) ^ 2 +1 = 5
3 | y = (3) ^ 2 +1 = 10
We then ordered the pairs:
(-3.10), (-2.5); (-1.2), (0,1), (1,2), (2,5), (3,10)
Tabem that can be represented by a table:
X | y
-3 | Y = 10
-2 | Y = 5
-1 | Y = 2
0 | y = 1
1 | y = 2
2 | y = 5
3 | y = 10
Now I begin to explain my doubts.
See this program:
Ex2
* To change this template, choose Tools | Templates
* And open the template in the editor.
Encontrando_o_valor_de_y package;
* @ Author des Soldat Gottes
Import javax.swing.JOptionPane;
Public class (Main
* @ Param args the command line arguments
Public static void main (String [] args) (
Int x, y;
String x1;
X1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',"); / / receives a value for the function y = x + 1
X = Integer.parseInt (x1); / / tranforma String in int
Y = x + 1; / / receives the value of 'x' and calculates' y '
JOptionPane.showMessageDialog (null, "The value of 'y' is: \ t \ t" + y);
/ / Displays the value of 'y'
System.exit (0);
We see that the program receives above a value for 'x' and replaces the function contained in the program, y = x + 1, and so is the value of the variable 'y'.
In: x1 = JOptionPane.showInputDialog ( "We have the function y = x + 1 \ n" +
"Assign a value for 'x',");
The entry is a number and that number is assigned aa ja existing function in the (y = x + 1).
The question is: would it be possible to come to a function?
Ex: the program ask: DIGITE THE FUNCTION?
The USUARIO DIGITARIA A FUNCTION ANY, TYPE: y = x ^ 2 +1
The program would recognize the function and give numerical values to that function as Ex1, at the beginning of this text.
And then to find the values of the x and y launch a table.
It would be possible that?
By invez of entering with a number so that the program sustitua a function ja existing as Ex2, seen above, entering with a function quaquer (type: y = x ^ 2 +1) for the program atribuisse values to that function and then create a table of values as Ex1.
I hope it has been easier to understand my doubts now.
Thank you for your attention!
God bless!

rafaelmenezes wrote:
Thanks for the explanation, could understand what fly said.
But as it applied to a program?
How to create a program that recognizes that the entry coefficients?Are you asking about how to parse out the coefficients from the string "3x^4 + 4x^3 - 8x^2 + 5x^1 + 2x^0"? If you define the format to strictly follow that example, this should get you started:
Strip out the spaces
Split the String on "x^"
That should give you [3, 4+4, 3-8, 2+5, 1+2, 0]
Split each resulting String on "+ | -", preserving the operator as a token so you can apply the correct sign to the coeff.
That should leave you with [3, 4, +, 4, 3, -, 8, 2, +, 5, 1, +, 2, 0]. Every other number is a coeff, the rest are the degrees.
You can strip out the +, since those coeffs are already positive, and strip out the - after negating the following number. This is all assuming that you have to write this yourself. There is no doubt already a library or 5 out there that does this for you.

How to make a java program, that can be used by c++ application

I'm developing a Java web application (WEBapp), but I have also a c++ program.
C++ program must use WEBapp method to communicate on the web.
How to make a Java public function that accept value, elaborate, then return the resul to c++ application?

jschell wrote:
You have C code.
You have Java code.
The two must communicate.I have a c++ program, and a Java program.
C++ program wants to communicate on the web (send text), and I'm trying to add this functionality to it creating a Java program.
NOW THE PROBLEM? How c++ program can use java-program (in local) to send data on the web?
You can just JNI to communicate either from java to C++ or from C++ to java. That is direct communication in that there is a single process involved. Thus you will no longer have a java application and a C++ application but rather a single application.I don't know JNI, i found http://java.sun.com/docs/books/jni/ and I think is too difficult to implement?
You can use files or sockets to communicate. Using sockets allows for any number of additional protocols including the previously mentioned web services. Those methodologies would allow more than one application to exist.I developed yesterday a java-side-interface using socket (in local host 127.0.0.1). So the c++ program must write or read to/from the socket to comunicate to java (then the java program send data on the web).
Finally it might be the case that you have a C++ application which you cannot modify. In that case then you MUST use whatever input/output mechanism that it supports. There is no choice. And until you have fully determined what those mechanisms are it is pointless to discuss a solution.I can modify the application, but I don't have developed it. The c++ application use a third-part dll (taken from SKYPE) to comunicate on the web: I have to remove the dipendence from this dll, and add the java program: java program must substitute the dll. It must be non-invasive to the c++ program. DLL calls can be "send(data)" or "receive(data)" or similar.
For this do you think that JNI is a must, or I can use soket on local host?

How to make a Java application that will change the client box's IP address

HI how to make a Java application( that application would be run on the client ) that will change the client box's IP address ( IP address of itself )

If you can do that through the command line, then use Runtime.getRuntime().exec(...) to execute your command.

How to make my java bean internationalization?

hi,
I have a project on tomcat. I have rewrite my jsp to multi-language according to user's browse language setting. User's language is English, the jsp shows them English. User's language is Chinese, the jsp shows them Chinese, and so on. But in my java bean code, some exception are thrown out with some message or alert. Can anybody tell me how to make these java beans show the language string acording to user's browse language setting?
thx
Pierre

Dear one_dane,
Thank you. That is a great document to me. The fact is that my owner code throws exception with a string. The code is:
if(amount<0) throw new Exception("Please input correct amount.");
If the code is in jsp, I can convert it to a internationalized String using struts tag <bean:message...>. But it is in a deep function of java class. So must I add a Locale object parameter to the function and all calling functions?
thx
yours,
Pierre

How to make a Button to work Actively even if there is a mandatory field..?

Hi All..
How to make a Button to work Actively even if there is a mandatory field to be fulfilled..???
I am badly in need of this logic, as i have to incorporate in my code..
Points will be rewarded without fail..

Hi Pavan,
I also faced the same requirement. U can do one thing like remove the obligatory keyword of that parameter/select-option. U can handle the same using the program in at selection-screen event. See this sample of code,
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_land1 for T005-LAND1 <b>[Needs to be mandatory]</b>                 no intervals no-extension.
SELECT-OPTIONS: s_panid FOR zoindex_val-zopanid.
SELECT-OPTIONS: s_effdat FOR zoexchrate-zedate.
SELECTION-SCREEN END OF BLOCK b2.
*-- AT SELECTION-SCREEN
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
*-- Obligatory Country Code
IF s_land1[] IS INITIAL.
    MESSAGE e050 WITH text-050.
                 "Please select the Country Code
ENDIF.
So whenever u do F8/Enter other than that push button, it will prompt u to enter the country code first then only u can proceed.
Hope this would help u in some way. Please do reward the helpful answers.

How to make third party cables work on iphone?

I have been using the original Apple charger cable that came with my phone (iPhone 5C) for a good year, but then it broke. So I bought this non-Apple cable because I didn't really wanna spend a lot of money for an original one. I have already charged my phone with third-party cables before, so I thought it would work. The first time I used the non-Apple cord, there were minor difficulties because I had to plug and un-plug it several times before it actually charged. 2 days later, I plugged an original cable (which was my sister's) to charge my iPhone. Obviously, it worked. But later on, when I went to charge my iPhone with the non-Apple cable, a message popped up (This accessory may not be supported). I dismissed it, thinking it would still charge. No such luck. I tried to unplug and plug it, but still, it won't charge. Now, I have to charge through my laptop. Can anyone tell me how to make third-party cables work? I don't really wanna bring my laptop everytime I charge. I'm planning to only use this cable until I get my hands on an original one. Please help.

Are you seeing the EE (or T-Mobile) network name and network bars in the top right hand corner of the screen? Turn off WiFi (Settings>WiFi - turn this off). Is there anything next to the network name in the top right hand corner (3G, E or o)? E is Edge and o = GPRS.
If there's nothing next to the network name, turn off the iPhone and then turn it back on. To do this, press and hold down the button on the top until you see the 'Slide to Power Off' message. Slide and then wait for the iPhone to shut down. To turn it back on again, press and hold the top button again unti lkthe Apple logo shows on the screen.
EE and signal bars top left = Yes
Turned off Wifi and next to the EE is 'o' which you say is GPRS? What does that mean please??
Got this reply from another forum but still no success???

How to make material availability check work during Work Order creation

Hi Experts,
Kindly advice about these matters:
1. How to make material availability check work during Work Order creation?
My requirement is Work Order can not be created when it has missing parts. I have set the config to '3' can not created when is has missing parts, but it still does not work.
I have implemented SAP Notes 1148139 on my system (SAP ECC 6 Ehp 5) also, but still does not have any effect.
I must not set the config Res./Purch Doc creation to 'immediately', because it does not fit to my user requirement. Is there anyone knows how to solve this requirement?
2. How to make information message/ Availability check screen appear when sparepart is missing, without clicking Availability Check button? for example: appear when clicking Save button.
Thank you
-amoonra-

Hi Maheswaran,
I have implement the prerequisite notes. (Notes 790219 and 1034962). Do you know why it is still does not work?
Thanks
-amoonra-

How to make the mobile application work with firewall and anti-virus ON

Hi,
I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
Thank you

Dear Rajesh,
Create a policy in your fire wall to allow the port to send and receive data.
I believe the port for the mobile should be port 8080 and 8443.
And your license server port 30000 and 30001
nd.Q

How to make the Smooth Scrolling work even H Swipe is tick?

In my article, if I tick the H Swipe only and the Smooth Scrolling is Both direction, Why is it in previewing it in my iPad the Scrolling seems Off because it's snapping into the pages.
Smooth scrolling is not working if H Swipe only is tick.
How to make the Smooth Scrolling work even H Swipe is tick?

Horizontal scrolling is only for 1024x768 or 768x1024 pages. That’s it.
You cannot combine horizontal only with smooth scrolling.
Bob

How to make "visa find resource" working with Agilent device

I am trying to use Agilent 82357B GPIB device with LabVIEW for instrument control.
I have checked:
1.       NI-VISA (ver 5.1.1) is the primary visa by checking visa.dll properties under windows\system32 folder
2.       Enable NIVISATulip.dll in NI Max Explorer
3.       Enable the Agilent libraries to work with NI 488.2 in Agilent IO library (ver 16).
I am able to communicate with the instrument in Max Explorer and talk to the instrument in LabVIEW with VISA write for almost all commands.
But I can NOT make one particular visa function (Visa find resource) working with Agilent 82357B GPIB.
With NI USB GPIB device, the same code above can find attached instruments as below, where GPIB1 is the Agilent device and GPIB0 is the NI device.
I have no clue on how to make “visa find resource” working with Agilent device.
Please help.
Solved!
Go to Solution.

Quick question. Did you also enable 488 support in Agilent?
If that does'not work try this. and well see if you found a bug
Jeff

How to sign a java applet using iPlanet SSL certificate?

Dear all,
I have a IPlanet web server with SSL installed,
can I use the SSL certificate to sign my java applet which will run on the server? how to sign a java applet in this scenario? somebody please help me! thanks!
yours sincerely
dashel

Why can't you create jar files?

How to make a Java Applet work beyond proxy?

Similar Messages

Maybe you are looking for