How to make a Mediator deal with calling an external Asynchronous Service

Hi,
Using TP 4.
I want my Mediator to invoke an Asynchronous Service that is external to the composite application. But I do not know how to get the reply from that service back into my Mediator.
I have worked with the sample of calling an asynch BPEL component within the same composite - that is fairly easy to accomplish.
What how can I tell the external service to invoke a callback porttype on my Mediator. Can the SCA container work out the correlation between the external service and the correct instance of the SCA composite? Should the Mediator publish the callback interface as an external service at the SCA Composite level? If so - how would the correlation work? If not, how does it work?
Any suggestions - even the statement that I always need a BPEL component in between that will support correlation with external asynch services, if that is the case - will help.
Thanks.
Lucas

Kylie, welcome to the discussion area!
Cable modems behave differently than DSL modems in that they will "remember" the last device that they have associated with. Your modem is "remembering" your MacBook and when you connect the TC, the modem won't connect because it "remembers" the MacBook.
You need to make the modem "forget" a previous device whenever you make a change in the device that is directly connected to the modem. Here's how:
Push the reset button on the modem if it's present
Pull the power cable on the modem
Pull the battery from the modem if it is easily accessible
Leave the modem powered down for 25-30 minutes
Power down the rest of your network as well
After the wait period, connect the modem to the WAN port on the TC with an ethernet cable
Power up the modem first and let it run for 3-4 minutes by itself
Then power up the TC the same way
Power up the rest of your network the same way
Depending on how you had your TC configured with the DSL modem previously, you may need to make a few changes in the settings.
Post back on your progress.
Message was edited by: Bob Timmons
null

Similar Messages

Issue with calling an external web service using web service proxy

Hi,
I've created several web services using JDeveloper succesfully in the past, however I'm getting an issue with one that was working ok previously. Have spoken to the developers of the external web service and they say they haven't changed anything. Also if I test the external web service through soapUI for example it seems fine so it would seem that the issue is with the autogenerated code created by JDeveloper.
Basically I get the following exception as it sends the request to the external service:
java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Bad Authentication header format: 'Basic realm="Integration Server" encoding="UTF-8"'
Expected "," at position 33
The user name/password appear correct.
JDev version 10.1.3.42.70
Any ideas?
Many Thanks
Gary
Edited by: user10916721 on 08-May-2012 09:54

Found the answer. Basically I had one proxy web service working and one not both linking to a middle tier written in web methods. THe issue actually ended up being with the web methods code in that the one web service (that was not working) was put together using a backwards compatability mode. Once this was switched back then started working again in JDev.

How to make Dynamically Shortened Text With "Show More"

Hi there! i want to know how to make dynamically shortened text with show more or read more in my website using HTML 5 pages or ASP.NET ?
example like these paragraphs
Lorem Ipsum är en utfyllnadstext från tryck- och förlagsindustrin. Lorem ipsum har varit standard ända sedan 1500-talet, när en okänd boksättare tog att antal bokstäver och blandade dem för att göra ett provexemplar av en bok. Lorem ipsum har inte bara överlevt fem århundraden, utan även övergången till elektronisk typografi utan större förändringar. Det blev allmänt känt på 1960-talet i samband med lanseringen av Letraset-ark med avsnitt av Lorem Ipsum, och senare med mjukvaror som Aldus PageMaker.
Det är ett välkänt faktum att läsare distraheras av läsbar text på en sida när man skall studera layouten. Poängen med Lorem Ipsum är att det ger ett normalt ordflöde, till skillnad från "Text här, Text här", och ger intryck av att vara läsbar text. Många publiseringprogram och webbutvecklare använder Lorem Ipsum som test-text, och en sökning efter "Lorem Ipsum" avslöjar många webbsidor under uteckling. Olika versioner har dykt upp under åren, ibland av olyckshändelse, ibland med flit (mer eller mindre humoristiska).
I motsättning till vad många tror, är inte Lorem Ipsum slumvisa ord. Det har sina rötter i ett stycke klassiskt litteratur på latin från 45 år före år 0, och är alltså över 2000 år gammalt. Richard McClintock, en professor i latin på Hampden-Sydney College i Virginia, översatte ett av de mer ovanliga orden, consectetur, från ett stycke Lorem Ipsum och fann dess ursprung genom att studera användningen av dessa ord i klassisk litteratur. Lorem Ipsum kommer från styckena 1.10.32 och 1.10.33 av "de Finibus Bonorum et Malorum" (Ytterligheterna av ont och gott) av Cicero, skriven 45 före år 0. Boken är en avhandling i teorier om etik, och var väldigt populär under renäsanssen. Den inledande meningen i Lorem Ipsum, "Lorem Ipsum dolor sit amet...", kommer från stycke 1.10.32.
Den ursprungliga Lorem Ipsum-texten från 1500-talet är återgiven nedan för de intresserade. Styckena 1.10.32 och 1.10.33 från "de Finibus Bonorum et Malorum" av Cicero hittar du också i deras originala form, åtföljda av de engelska översättningarna av H. Rackham från 1914.

Moved to the main Dreamweaver support forum.
There are several ways you could approach this. Here's one you might try:
Give the first paragraph an ID, such as "first", and wrap the paragraphs you want to hide in a <div> with another ID, such as "more". Then add the following block of JavaScript just before the closing </body> tag of the page:
<script>
var first = document.getElementById('first'),
     more = document.getElementById('more'),
     trigger = document.createElement('span');
trigger.id = 'trigger';
trigger.innerHTML = 'Show less';
first.appendChild(trigger);
function toggleDiv() {
var state = more.className,
       text = trigger.innerHTML;
more.className = (state == 'open') ? 'closed' : 'open';
trigger.innerHTML = (text == 'Show more') ? 'Show less' : 'Show more';
toggleDiv();
if (trigger.addEventListener) {
    trigger.addEventListener('click', toggleDiv, false);
} else if (trigger.attachEvent) {
trigger.attachEvent('onclick', toggleDiv);
} else {
trigger.onclick = toggleDiv;
</script>
This gets references to the "first" paragraph and the "more" <div>. It also creates a <span> with the ID "trigger" that's appended to the "first" paragraph. The rest of the script defines a function called toggleDiv(), which toggles the "more" <div> open and closed, and changes the text in the "trigger" <span>.
You also need to create the following style rules for the various elements:
<style>
#trigger {
    text-decoration: underline;
    color: blue;
    cursor: pointer;
#more {
    transition: ease-out .7s;
    overflow: hidden;
#more p:first-child {
    margin-top: 0;
#more.closed {
    height: 0;
    -webkit-transform: translateY(-600px);
    transform: translateY(-600px);
#more.open {
    -webkit-transform: translateY(0);
    transform: translateY(0);
    max-height: 600px;
#more + p {
    margin-top: 0;
</style>
This solution hides the text and creates the "trigger" <span> only if JavaScript is enabled in the browser. It should work in all browsers, including Internet Explorer 8 and earlier.

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

How to make a PDF form with expanding tabel or expanding fields, like in Word.

How to make a PDF form with expanding tabel or expanding fields, like in Word.

This is currently not possible in Formscentral. It is something we are working on for the future. Please stay tuned.
Andrew Yarborough

Is their any tutorials on how to make a navigation bar with drop downs in Dreamweaver CC now ?

Is their any tutorials on how to make a navigation bar with drop downs in Dreamweaver CC now that they do not have the spry option?

bbull2005 wrote:
Preran, why wouldn't Dreamweaver include it's own menu/navigation bar widget?
I can't answer on Preran's or Adobe's behalf, but I think you'll find at least part of the answer here: http://wiki.jqueryui.com/w/page/38666403/Menubar
Adobe decided to discontinue development of Spry in August last year, and Dreamweaver CC made the switch to using jQuery UI widgets and effects. One reason for dropping Spry was that it failed to work correctly in some browsers. Judging from the fact that the jQuery UI menubar is now "on ice", creating a flyout menu that works reliably across all devices is proving more difficult than originally envisaged.
Because all other widgets in Dreamweaver CC use jQuery UI, it's a reasonable assumption that Adobe hoped the jQuery UI menubar would be ready in time, but it wasn't.

XmlDataProvider .... is gone completely in my Xaml file. Why? How many different ways to deal with xml data source through WPF

I followed a procedure described in a book.
1. insert "Inventory.xml" file to a project "WpfXmlDataBinding" .
2. add the XML data source through the data panel of "blend for 2013", named it "InventoryXmlDataStore" and store it in the current document.
3. dragged and droppped the nodes from the Data panel onto the artboard.
Then I checked my Xaml file against the one provided by the book
Xaml file by the book:
<Window.Resources>
<XmlDataProvider x:Key="InventoryDataSource"
Source="\Inventory.xml"
d:IsDataSource="True"/>

<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid>
<ListBox HorizontalAlignment="Left"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="89,65,0,77" Width="200"/>
</Grid>
my Xaml file:
<Window x:Class="WpfXmlDataBinding.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="922" Width="874">
<Window.Resources>
<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid DataContext="{Binding Source={StaticResource InventoryXmlDataStore}}">
<ListBox HorizontalAlignment="Left" Height="370"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="65,55,0,0" VerticalAlignment="Top" Width="270"/>
</Grid>
</Window>
All looks quite the same except the <XmlDataProvider ....> part under <Window.Resources>, which is gone completely in my Xaml file.
1, Why?
2, How many different ways to deal with xml data source through WPF?
Thanks, guys.
(ps My "WpfXmlDataBinding" runs without problem through.)

Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How to execute a system command with call executable in teststand 4.2.1?

Hi All,
how to execute a system command with "call executable" step in teststand 4.2.1?
example as i want to quit a application.using "taskkill /f /im xxx.exe".And execute other system command(DOS).
BR
Johnny

Hi,
I want to run netstat -an | find "8080" command from command prompt using call executable in test stand. after that i would like take the std output to local variable.
Attachments:
callsettings.jpg ‏404 KB

How to make the wifi connection with Ipad in china since it requires user's name and password.

How to make the wifi connection with Ipad in china since it requires user's name and password just like the dialed-up?

The same way you would connect to a secure wifi network in any other country. Supply the username and password when prompted.

HT4642 ios numbers:how to make cell height variable with auto line brake setting ?

ipad numbers; How to make cell height variable with auto line break setting?

That's strange. I responded earlier and the whole message got trashed. Hence the test post before retyping the entire thing again.
Thanks for the reply.
The video clip is a single screen capture video clip. This is what I've found by playing around with this more.
The original clip resolution is greater than 640x480. If I use QT Pro to convert the original clip to 640x480 and then use either Flip4Mac or PE7, then the resolution looks good.
Just trying to figure out if should keep all workflow on the MacOS side. There are several different version of Flip4Mac. $49 gives me 640x480, but if I ever want to make it slightly larger then I would need to go with the $99 or HD version.
I also tried to export to AVI with QT Pro and the import with Windows MovieMaker but it didn't work really good. I liked the simplicity (since PE7 hogs a lot of resources especially through VMWare).

My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

My 3gs wont restore after ios 5 update. I have tried firmware restore and restore from backup, neither works. All I get is "iphone restore failed because backup session failed" Any ideas on how to make a successful restore with this ios 5 update?

I was having the same problem, I backed up my phone and then updated to iOS 5 and then it kept telling me it could not restore from my backup as it had failed. After reading a bunch of forums and posts and trying everything, I did manage to get it to work. I had tried the Time zone, creating a new computer user account, disabling anti-virus, etc.
It took a combination of things, one of which was disabling the anti-virus completely and copying the contents of the backup folder to my desktop and then deleting everything in the backup folder. Then I rebooted the PC, entirely disabled the anti-virus, copied the one backup I wanted to restore from the desktop to the backup folder and then trying to restore. Low and behold the phone said restoring from backup and I am back in business, so when in doubt, trying combining some of the fixes together.

HT1937 how to make iphone to iphone video call through sim card

how to make iphone to iphone video call through sim card??

use facetime to video call or any other app for that. you should have an cellular data connection or wifi to use this

How to call an external web service from OIM?

Hi,
I have a question on how to call an external web service from OIM within e.g. creating user process? How should it be done; through adapter and task in the process?
Any recomendations?
Thanks in advance!

it is not clear to me if you are having problems with calling java code from OIM or if the problem is the web service API.
Lets do some divide and conquer:
Can you create a simple java class that just writes a couple of lines to the log? Please attach this code to the OIM task and make sure it runs.
Once this works we can start looking at the web service call.
Best regards
/Martin

How to Make my Macbook Pro's internal HDD external, when I get a SSD?

Hey, I know there are other posts on what enclosure you can use and if it's a possibility, but I haven't seen any that tell me how I get OS X on the SSD without a disc? Can I download the installer on a flash drive somehow? Also, I am wondering if this really is a good idea, using my Macbook Pro's HDD for a backup HDD, instead of buying one? I have no use for it anyway, if and when I get a new SSD. BTW, the HDD is the upgraded factory 500gb 7200rpm. Also, do you think it's smarter to have a bigger backup drive than internal drive? In other words, I would like to get a 1TB Samsung 850 Pro SSD, and my current HDD is only 500GB.... I am a musician and need a lot of storage for musical purposes. I use Final Cut Pro, Logic Pro X, Ableton Live 9, Office, and Photoshop.... My Macbook Pro is a Late 2011 Macbook Pro 15.4' 2.2ghz quad core i7 8gb RAM. Oh yeah and a mother thing is, I think I should get an enclosure that has a thunderbolt port with usb, what are your thoughts?

How to Make my Macbook Pro's internal HDD external, when I get a SSD?
Get an externel enclosure at the same time.
You can order from OWC
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Put the SSD in the externel enclosure and use something like Carbon Copy Cloner, to clone the internal drive and all it content to the SSD. Then swap them out.
Always good to have more than one backup.

Help needed with process to call an external web service from within ABAP

Hello,
I have an understanding of how I can provision web service from within SAP so that it can be consumed by external apps.
Now, I am in need to know the, how I can call an external non-sap web service (let's say a java application) or even a public domain web service for that matter:
Is there any lay man's guide out there? which will list following step:
A sample ABAP program calling an external web service
List of all the configurations needed within SAP to make this happen (calling an external web service).
Any help will be greatly appreciated.

Hi Matesh,
Please use the following command in Google : site:sdn.sap.com abap consuming web service
There is many samples of your needs on SDN.
Like this one :
http://wiki.sdn.sap.com/wiki/display/Snippets/WebServiceconsumerusingABAP-PROXY
Regards, Gilles.

How to make a Mediator deal with calling an external Asynchronous Service

Similar Messages

Maybe you are looking for