How to make a numbered heading "link" to the next heading so it updates

Heading 1 is in the header. It is numbered A,B,C.
Heading 2 is in body It is numbered 1.
Heading 3 " 1.1. etc.
they are not linking so that Heading 3 turns into 1.1. it stays 1.

For a numbering scheme that goes
A
1
1.1
1.2
1.3
2
2.1 etc.
you have three levels. The first and second levels increment +1 each
time they occur. The third level is the number to the right of the
period, and it also increments +1 each time. The number that shows up to
the left of the period is a number placeholder for the second level (the
button to the right of the Number: field in Numbering Style). It will
not increment, but picks up the whatever number was last displayed at
the second level. So assuming you've got 3 levels in this list scheme,
your Number: for the 3rd level (the 1.1 level) would look something like
this:
^2.^#^t
The ^2 is the number placeholder, displaying whatever number showed up
in the last level 2 instance. The ^# is the current third level number.
And the ^t is a tab.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Similar Messages

  • How do I get numbers to automatically add the next date down a column in numbers?

    How do I get numbers to automatically add the next date down a column in numbers?

    Hi Dd,
    If you want the next date automaitcally  filled in when you add a row to the bottom of the table, you can use a formula.
    Here's an example, done in Numbers 2.3 (Numbers '09). The method is basically the same in Numbers 3.
    Formulas in row 3:
    B3: =B2+1
    C3: =C2+7
    D3: =D2+14
    These have been filled down to the last row of the table.
    The same table is shown below after three rows have been added by dragging the Row control handle (below the tab for row 7) down. No changes other than adding thse three rows were made by the user.
    Note that rows 1 and 2 are header rows, and that row 2 contains the starting date for the seraies of date in each column. In the formula, the number at the end tells Numbers how many days to add to the previous date to get the next date.
    Autofill of the formula requires that every non-header cell located above the cell into which the formula is to be filled contains the same formula.
    Regards,
    Barry

  • How to make code in dreamweaver flow to the next line?

    The line lengths of my code are really really long. How do I make it automatically flow to the next line without causing it to actually be a new line? Just for viewing purposes. I don't like having to scroll all the way to the end of the line of code to add a close tag.

    Hi
    Right-click on the area next to the 'box' that has the page title, and select 'coding' to enable the coding toolbar, (appears on the l/h side of the code window) then select the word wrap icon, see image -
    PZ

  • How to make site root-relative links work in DW and Server both?

    See details on buggy DW image link behavior, below. My question is:
    1) how to make site root-relative links work in DW and Server both? Or…
    2) how to reliably automate the change of several hundred legacy root-relative links of the form
    /images/image.jpg  to document-relative?
    That is, to
    ../images/image.jpg or
    ../../images/image.jpg or
    ../../../images/image.jpg etc…depending on where the directory is.
    The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
    I tried changing the files to how DW creates root relative links now:
    /public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
    I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
    The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link?  I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
    It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
    Summary of buggy behavior: (see test with images here)
    "old style" site root link
          /images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: broken (grey w/ broken icon)
          Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
          Browser: good
          Ease of switching: n/a (existing format)
    "new style" site root relative link
          /public_html/images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: good
          Link check in DW: good
          Browser: broken
          Ease of switching: easy
    Document relative link
          ../../images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: good
          Link check in DW: good
          Browser: good
          Ease of switching: hard (how to automate?)
    Absolute link
          http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: broken (grey w/ broken icon)
          Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
          Browser: good
          Ease of switching: n/a...not a real option
    Thanks!
    Similar discussion on "/"

    Hello again Jon!
    Thanks for jumping on this.
    All clear and understood about where publc_html is etc.
    No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
    "/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
    Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
    The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url,  which is automatically set to http://www.oasisdesign.net/public_html/
    it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
    Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
    Art
    PS--don't  have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
    Is there an easy, automated way to change links sitewide from document to root relative?

  • How to make a magnifying glass link to a look up table ?

    Dear Friends,
    Hello. I am developing the accounting application of journal entry. In journal line, I use the image "magnifying glass" next to each chart field. When we click on the magnifying glass, it's supposed to come up a look up table( a chart and name mapping table), and we select the proper chart to input into the chart field.
    I understand to create another record and page for the look up table. But I don't understand how to make a magnifying glass link to a look up table. Can anybody tell me how to do that ? Thanks.
    Lucy

    This is how it works,
    Table A (which stores chart fields). You have used fields from table A on a page so that users can input data.
    You don't need to put a magnifying glass image or create a new page to achieve look up page.
    all you need to do is create another table say Table B which should have the chart field and corresponding description you want to show on lookup page. Then open record-field property of the chart field on Table A and mention Table B as prompt table.

  • Firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link

    firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link.

    You can right-click the image and use "Save Image As" to save that image.

  • How to make visible Time Sheet link

    Hi,
    I want to know how to make visible Time Sheet link on portal for a particular Personnel Area so that employees of this PA can fill their Time Sheet from the portal.

    HI,
    Use Tcode - CAT 2
    Regards,
    Shadeesh.G

  • How can I disable a hover link in the phone view size?

    Hola
    How can I disable a hover link in the phone view size?
    I got this site where I got a gallery page,
    the pics have a hover/link state (?) where as you click in them
    they will open a bigger pic. (Prettyphoto)
    Thanks good.
    What I want to do, is that the hover state (?)
    won't show in the phone size.
    I know that I will need a media queries, but I'm not sure
    where or how to tackle this problem.
    This is the code where I have the pics
    <div class="grid_3 project-item bar">
                                             <figure class="project-img">
                                                 <img src="../images/gallery_pics/memos_bar_s5.jpg" alt="Memo's Cocina & Tequila Bar" />
                                                    <div class="overlay"></div>
                                                    <div class="mask">
                                                       <a class="icon-image"
                                                            href="../images/gallery_pics/memos_bar_b5.jpg"
                                                            rel="prettyphoto[gallery]"
                                                            title="The Bar">
                                                            <i class="icon-search"></i>
                                                     </a></div>
                                           </figure>
                                          </div>
    Thanks for your help

    If you don't want a :hover state to show in the phone css of a fluid grid layout, you would remove it from the global settings and only include it in the tablet and desktop media queries.
    Or are you trying to do something else?

  • HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

  • How can I put a music link in the page like this?

    How can I put a music link in the page like this?
    http://members.aol.com/trumanj/midi/tjsragtime.htm
    Thanks

    Hola JB
    No, I haven't...I'm trying to learn flash and it's been keeping me very busy...maybe it's the age..
    Len, I been trying to do it that way, but, as I just mention, Flash don't like me :)
    Thanks, I will do that for sure.
    Daniel Ulysses

  • How to make a physical standby database in the read_only state in 11g?

    In 10g, we can make a physical standby database in the read_only state. But in 11g, no a read_only state for a physical standby database. How to make a physical standby database in the read_only state in 11g?

    Hi
    read-only mode (for 11g physical standby)
    A mode in which a database can be opened that allows queries, but disallows modifications.
    A physical standby database can be opened read-only so that queries may be performed. If a license for the Oracle Active Data Guard option has been purchased, a physical satndby database can be open while redo apply is active. This capability is known as Real-time Query.
    For more details have a look at:
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/manage_ps.htm#SBYDB00706
    Hipe this Helps
    Regards

  • How to make a short clip out of the original one ?

    Some days ago, I asked a question on editing a clip in this forum. The responder asked me to provide a few seconds of the clip for his examination. But I got stuck. I didn't know how to make a clip of a few seconds out of the original clip and that it had the exact same format and properties as the original clip.
    Neither Premier nor After Effect have an ouput option such as "same as original source" .
    So, my question is how to make a short clip out of the original one with everything the same properties as the original one.
    Thanks in advance.

    May be I haven't made myself clear
    Sorry, but I think that I am still not following you.
    I want to export and render the short clip to a new file which I want to have everything the same as the original clip. Just like I cut off a few seconds off it and that few seconds becomes an independent file.
    OK, you have your original source file. It is complete and is also unaltered. If you want a "Copy" of it, just use Windows Explorer, or similar to make that Copy. If you want a separate file of your edited version of that source file (as it appears in the Timeline), use the WAB (Work Area Bar) to include just that edited instance of the source footage, and Export just the WAB. This will give you a separate file with the edits in it.
    I still feel that neither is what you want. If you can step me through, maybe with screen-caps, what you have and what you wish to end up with, I can see the operation more clearly.
    Good luck,
    Hunt

  • How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

    How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

    @Bennycui,
    Clean install here
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-77353
    Then install RapidBoot
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-77013
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • How to make plug ins show up in the filter menu, several Topaz plug ins are in the 13 plug in folder?

    How to make plug ins show up in the filter drop down menu, when several Topaz plug ins have been moved from Elements 11 to the plug in folder for Elements 13?

    Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

  • How to make session invalid when user refresh the page?

    How to make session invalid when user refresh the page?

    I have a <form> in a JSP file that has another JSP file as an action.
    I have main.jsp that has <form> with action.jsp file as an action.
    Now when I submit the <form>, request forwarded to action.jsp and it will take the action. But this file is taking so long, hence user refresh the page again and again, hence duplicate request processing is occuring.
    I want to prevent this.

Maybe you are looking for

  • WebLogic 10.3.2 console hangs when attempting configuration changes

    Hi, I am running: WebLogic 10.3.2 Windows XP x86 64bit JRockit JVM 1.6.0 I have done a fresh install (twice) and whenever I start the main admin console and try to create a new server or deployment it just sits there and hangs. There are no other ser

  • Debugger not stopping at the breakpoint

    Hello all, I am running transaction F110(Automatic Payment Transactions). I follow the below process for Check Payments. Step - 1 : Put Run date and Identification. Step - 2 : Set Parameters Step - 3 : Set fields in the Additional Log Tab Step - 4 :

  • How to determine the last record inserted

    hi I have a table abc ( x number, y number, z date ) columns, there is no primary or unique key. I have been inserting values into it. there r some duplicate values to. but now I want to modify only the record inserted at the end. i.e if initially AB

  • Multiple JFrames

    Hi. I have a situation where I need to display multiple JFrames. I have an application with a control panel that has the ability to launch another application (via a JButton). The only problem is, the only handle I have to that other application is a

  • I want to increase my current subscription to Unli...

    How do I do that without having 2 subscriptions being charged at once?