Debugger not stopping at the breakpoint

Hello all,
I am running transaction F110(Automatic Payment Transactions). I follow the below process for Check Payments.
Step - 1 : Put Run date and Identification.
Step - 2 : Set Parameters
Step - 3 : Set fields in the Additional Log Tab
Step - 4 : Choose a Program variant for program RFFOUS_C in Printout/Data medium Tab.
Now I have put a break point in the program RFFOUS_C. But when I run the Payment it does not stop at the breakpoint in the program RFFOUS_C.
This program in turn calls a sap script which prints a check. I also tried activating the debugger for sap script.
I dont know how to stop at the program. It goes to the spool and I can see the output in the spool request for the form i have created, but it does not stop at the breakpoint.
Any ideas or suggestions ?
Regards,
Salil

Run F110 all the way to where you create the payment run.  When doing the payment run, do not check "Print Immediatly". 
After the run is complete, go to SE38 and run RFFOUS_C with your variant.  You will have to enter the Run Date and Payment ID on the RFFOUS_C selection screen.  Execute this program and you will hit your breakpoint.

Similar Messages

  • Workflow - Not able to stop at the breakpoint, how to debug?

    Hi,
    I am working on solving a workflow problem, but i am not able to stop at the breakpoint put on the function module called through the program.
    I am sure that the function module is called through the workflow. please tell me why is it not stopping.
    Pls help.
    Regards,
    Chamandeep

    maybe because it is a background method, its then executed by wf-batch.
    the easiest way to test/debug a method is doing it with tx swo1, fill in the Business object and test the method with the corresponding input parameters
    /Peter

  • [4.0 EA2] Debugger not stopping at breakpoints/not working at all

    When running the debugger in SQL Developer either the debugger immediately connects then disconnects after executing the code WITHOUT stopping at breakpoints or the debugger hangs and the only actions I can choose is to terminate or to pause.
    The first issue happens a lot more frequently. I am attempting to debug a procedure in a package where the there are several breakpoints throughout the code including at the very start. After checking my tables in which the procedure acts upon before and after running the debugger I can see that the data has been altered so the debugger has ran through the procedure and executed the code without stopping. I have checked this on very simple code where the breakpoint code has been called and have experienced the same result.
    Im using 64bit Win7 -
    JDK - 1.7.0 update 40
    Output:
    LOAD TIME : 329UsersCache.fillIn() time = 4  ret==null?: true
    UsersCache.fillIn() time = 3  ret==null?: true
    tableAlias.cardinality()==0
    UsersCache.fillIn() time = 4  ret==null?: true
    UsersCache.fillIn() time = 3  ret==null?: true
    tableAlias.cardinality()==0
    UsersCache.fillIn() time = 4  ret==null?: true
    tableAlias.cardinality()==0
    tableAlias.cardinality()==0
    tableAlias.cardinality()==0
    Debugger Output:
    Connecting to the database Layout Pro.
    Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
    Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '*****', '*****' )
    Debugger accepted connection from database on port *****.
    Executing PL/SQL: CALL DBMS_DEBUG_JDWP.DISCONNECT()
    Process exited.
    Disconnecting from the database Layout Pro.
    Debugger disconnected from database.
    Thanks in advance,
    James

    Hi
    Have you compiled for debug? - Yes
    Are the breakpoints definitely on code lines?- There are several lines of code which have up to 5 consecutive breakpoints
    You can also set the preference Tools|  Preferences|Debugger|Start Debugging Option to 'Step Into'.  That should stop at the first executable line. - This worked thank you, I can now access the debugger and test my work.
    On swapping the preferences back to 'Run Until a Breakpoint Occurs' (which it was originally set as) the debugger now correctly stops a the breakpoints. I didn't make any changes to the code/debugger parameters or anything so I'm rather confused to why its suddenly started working .
    But anyway thank you for the help,
    James

  • Debugger Not Stopping at Break Points

    Howdy folks,
    I am trying to debug a rule in which I checkout / modify / checkin a renameUser view. I set some break points at the invoke statements for checking out and checking in. The rule is called from my Update User workflow. I know the rule is executing because I am dumping the context to a text xml file. The break points are right before and after the invoke that dumps the context to xml. However, when I update someone the debugger is not breaking in and stopping the thread to let me step through it. I would really like to see why my checkin and checkout invokes are not working, but can't see the error message due to the debugger not stopping...
    Does anyone have any advice, clues or ideas to get the debugger to work more correctly?

    It's probably running anonymously. That was my issue I think. The break points don't work on anonymous execution. At least not for me. Now, you can specify to use anonymous break points.. But then it breaks at EVERY anonymous break point. I had a hard time stepping through them all to get to what I needed to see execute, before it would time out... good Luck...

  • BADI BUPA_INBOUND debug not stopping at the break point

    Hi Guys,
    When downloading the customer master from ECC to CRM BP category type is defaulting to Organizations for type person. Am trying to change this based on a condition in the BADI BUPA_Inbound. I set a external break point in this badi but when tried to download the customer master from ECC debug is not stopping in the badi.
    Could anyone please guide me to solve this issue?
    Thanks,
    Sundar

    Praveen,
    just have a look at sample code of VOFM.
    Go to the routine number that needs to be copied.
    Put your cursor on the routine number field that needs to be copied.
    Overwrite that number with your new routine number and hit enter.
    The new routine will be created as a copy of the old routine and you can modify the new routine as you need it.
    Ex.
    You have to copy routine 104 to 904
    Routine number   Description          Active
    104              Bill.bus.item data   X
    Put your cursor on 104 and then change it to 904 and hit enter.
    904 will be created as a copy of 104 and you can make your changes in 904.
    Don't forget to activate it after you are done.
    Hope it helps.

  • Playhead will not stop at the end

    When I play my project in FCP the playhead will not stop at the end but will continue for a few seconds. So when I want to share my project I have to make a range so that I don't have a black clip at the end. There's no gap or what so ever on the timeline. How can I solve this? Thanks for your answers.

    Unfortunately, the problem is not solved. When I hit the end key the playhead goes to the end. Actually one frame further. Because when I go back one frame, I get the end clip symbol in the corner. But if I just play, the palyhead goes further for a 3 seconds. Then I get the clip symbol "negative edge" on the rightside. See also image. And there is nothing in the timeline.

  • With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

    With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
    iPad2 sync is fine.
    Any ideas to solve it?

    This sounds like a problem you should take up with Apple Customer Support.
    The other users like yourself here are not going to be able to help you with this problem.
    Allan

  • My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS  require a a passcode and I don't have one. Any suggestions?

    My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS  require a a passcode and I don't have one. Any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup.
    In order to restore with the unknown Restrictions passcode you will likely have to place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Last,
    - Restore to factory settings/new iOS device.      

  • Capture Now does not stop after the limit is exceeded........

    Hi,
    I'm using FCP HD 4.5 on a DP500 G4, OS 10.3.9. I'm doing "capture Now" to get some VHS video into my machine. FCP will not stop the capture no matter how I set the time limit. This used to work, so what did I do??
    Quite frustrating.
    I've told FCP that I'm using a "non-controllable device" but the capture just keeps on going and going and going..........
    Help......
    Pete D.
    dual 500 G4 Mac OS X (10.3.9)

    When I tell it to stop it responds and stops just fine..... if it's been going for 10 minutes I have a 10 minute long file - even if the limit was 3 minutes......
    What happens when you tell it to stop rather than
    relying on the time limit?
    x
    Do your part in supporting your fellow users. If a
    response has been Helpful to you or
    Solved your question, please mark it as such
    as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered
    when you get enough information to close the thread.

  • Subvi does not stop from the mainVi immediately when the stop button pressed in the mainVi

    Hi guys,
    I have a mainVi which has a subVi inside. I want to have a kind of emeregency stop button in my mainVi.
    when I pressed the button, the program does not stop instantly. it does one loop and then stops.
    please help me to solve this problem.
    Attached you can find the Main and SubVI
    Attachments:
    Sample2 MainVI.vi ‏18 KB
    Move_MINI Editted SubVI.vi ‏13 KB

    This is basic dataflow. Any code is available to run as soon as data is present on all its inputs. No data is present at its outputs until all the code inside has completed.
    What this means in your case is that the stop button will likely be read almost instantly when the while loop starts an iteration. It will not be read again until the start of the next iteration. This is why it will usually take an extra iteration to stop. You can either force it to read the stop button after the other code inside the loop completes or use a Producer/Consumer (events) architecture where the stop button will be read in a parallel loop containing an event structure.
    It also means that the Move_MINI subVI has no means of responding to any external events (such as the stop button being pressed) after it has started running. All the other subVIs are missing so it is hard to tell what is going on. From the control labels and VI names I suspect that this may be some kind of motion control system. If so it probably takes 100s of milliseconds to seconds or longer to complete a move. To allow an external event to modify the behavior of such a VI, you need a means of communication between the event (stop button) and the VI. A notifier may be an appropriate choice. The VI also needs to be configured in such a manner that it never goes more than about 100 ms without an opportunity to stop. Without knowing more about the subVIs, I cannot say how this might work.
    Lynn

  • Phone will NOT stop making the email notification sound.

    I just restored and upgraded to 2.0.2 and now my phone won't shut up! I'd rather not go through the restore again. Any suggestions?

    Apple sanctioned? I think you just need to downgrade iTunes, then re-install what ever version you want. How can it not be Apple sanctioned? They are still Apple software, just your choice.
    If you need earlier versions for the iPhone try.......
    http://iphonefreakz.com/iphone-firmwares/

  • Debugger not working in the web browser.

    Hi everyone,
    I am not able to open the debugger in the web browser. Its like earlier when I use to put a break point in my codes and run the browser the break point use to trigger but looks like due to some setting changes it has stopped working.
    Can anyone suggest what settings have gone wrong .
    Rgds,
    Anu.

    Yes its working now, but if I open it in internet explorer the mouse pointer and the sand closck on it keeps flickering and no codes can be seen in the debugger and the debugger doesnt open at all in mozilla firefox. It use to work fine before. Please suggest.
    Rgds,
    Anu.

  • When I open a new window, the spinner does not stop, or the window open

    I have a MBP 3 yrs. old, running Snow Lep. When I open a new window, the spinner in the address bar spins and window does not open unless I click on the X and stop the spinner. Some times this doesn't work either. It just hangs up trying to open the next window.

    The given are very little details about your problem so please elaborate. 
    2. on each page load you have to verify whether the session variable. if "IsLoggedIn" exists and its value is "true" then you can show the requested page otherwise redirect to login page.
    if(Session["IsLoggedIn"] == null || Session["IsLoggedIn"] != "true")
    Response.Redirect("login.aspx");
    Better way: use a master page. In the load_page event, check the session. Thus, you wouldn't need to write the method to check in every page, just in the master page.
    Noam B.
    Do not Forget to Vote as Answer/Helpful, please. It encourages us to help you...
    Masterpage is a better idea.
    But The login page shouldn't use MasterPage OR need to have logic to check before redirecting to login page if you are already in Login page.
    Otherwise you will get into Recursive Redirection error.
    hope this helps.

  • Spotlight on my iMac running snow leopard will not stop indexing the hard drive. How can I stop this?

    Spotlight on my iMac (OSX 10.6.8) has suddenly begun indexing the hard drive non-stop, causing very sluggish operation and spinning beach balls. Reinstalling the operating system has not helped, nor has repairing permissions or the disk.

    One of the first things that happens when installing a new version of OS X is that the Spotlight search app is setup to index all available hard drives.
    The indexing makes it faster and easier for the Spotlight Search app to find things on and off your Mac.
    You can either let it take the time it needs to do this (Spotlight will only do this one time, initially) OR if you just can't or want to wait for this to complete, you need to go into OS X System Prefences panel in the OS X Dock, locate the Spotlight icon.
    Click the Spitlight icon and another set of menus appear.
    Find the menu item dealing the Spotlight indexing and uncheck its checkbox to disable Spotlight indexing.

  • Workflow does not stop after the first reject

    Hi!
    We just got a 30-day Microsoft 365 trial at work in which we also received a Share site! I've been playing around with it a lot, especially to help them build an approval process. I believe since this is just a trial, I do not get the globally reusable Approval
    Workflow. So I tried creating a new workflow attached to a list I created.
    In this process, when the list is submitted, it needs to be approved by 2 people sequentially - John Doe & then Billy Bob.
    When I create a new workflow, I click on actions and select "Start Approval Process". After doing that, it populates Step 1 with the following line - Start Approval process on Current Item with these users. I clicked on "these users" link and added the approvers
    in sequences - John Doe, then Billy Bob.
    I saved the workflow, checked for any errors and published the workflow. While testing with this workflow, I realized that when John Doe rejects the process, the task is still assigned to Billy Bob when it is actually suppose to stop.
    How can I stop this workflow right after John Doe rejects the process?
    Any help will be appreciated!

    Hi whocareswhoiam,
    Please post your question to Office 365 forums for quick reply. Below is the link.
    http://community.office365.com/en-us/f/default.aspx
    Thanks for your understanding.
    Best regards,
    Emir

Maybe you are looking for