How to make a precise 0 to 60Hz vco in fpga?

When using the express sine generation in fpga, lets say 50Hz, the frequency is round-off to some mHz .
So correct 50001 mHz generation is not possible with the express sine generator.
What is the best way to solve this?
My goal is to precisely generate frequencies from 0 to 60Hz in millihertz steps. Like a VCO or voltage controlled generator does.
The frequency should be addapted hundred times a second from the host. Like a sweep function.
Have program a realtime simulator for powerplants written in C++.I translates the RT sim to NI components and software (Labview).
My rt pxi turbine simulator for simulating grid incidents was succesfully used in a nuclear plant in 2006. Look at http://sine.ni.com/cs/app/doc/p/id/cs-755

Hi,
I think that the examples below can be usefull for you. More advanced functionality is used than Express Vi's.
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=E142BB6B6CB2097EE034080020E74861&p_node=201268&p_source=External
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=E129B7EFAFD918AAE034080020E74861&p_node=DZ52000_US&p_source=External
Regards.
JorisV

Similar Messages

How to make vendor payment thru RTGS

Hi,
Will someone pl let me know as to how to make vendor payment thru electronic fund transfer?
Our vendors are paid thru RTGS. Can some pl let me know the complete business process procedure.
And also the configuration required for the same.
Thanks in advance
Regards
Anand

Dear Srikanth,
Thanks lot for your reply.
Precisely, following is the scenario as regards vendor payment by RTGS goes.
A letter stamped & signed by an authority specifying the list of vendors and amount to be paid to each is given to bank. And based on the letter bank effects the payment by RTGS.
Then bank intimates back to the company that payments according to letter have been effected.
Based on above I seek your suggestion as to how this can be done( Config plus Business process procedure).
By the way, can T code F-58 be used for this to post individual payment and payment advice be generated to be sent to individual vendors? By doing this vendor line item(s) would be claered and bank sub Acct would be debited. And at the time of executing Bank statement, bank sub Acct's line items are cleared?
Will it be ok or RTGS payment can be done Only using F110?
PS:- in F-58 system allows only Cheque PM. for any other PM it gives error...
Please suggest at your earliest.
Regards
Anand

How to make the buggy DR8-A HD Burn work?

My HD Burn simply don't work. I have change to another new drive from
the shop that I bought the DR8-A, but still the same!!!
It is always the error - power calibration error when I am burning a 700MB
with HD burn (tried SmartBuy, Sony and Imation, all cannot work)
I done testing with the Nero provided and latest Nero 6.3.0.3.
Actually I fancy this drive over TDK AID 880NA because of HD-Burn!
Can someone please share how to burn with HD-Burn? Any special medium?
MSI, can you please do something? Reply us with a FAQ or something helpful?
I think this is the worse MSI product that I have bought.
I used to be a fan of MSI, my whole PC consists of MSI parts.
Now my impression of MSI products changed big time.
How to make this HD Burn work?! Anyone got any comment or information?
Please share???

I have the MSI DVD DR-8A and i've already burnt over a dozen HD-burn CDs without any problem
My only road block was to find how to use it with nero (it is presented as a different type of disk), but after i read nero doc and chose the right option, it has been flying. I'll report on my media later (i dont have them here).
Edit: I've used
- FujiFilm CDR 80minutes 24x
- Memorex CDR 80 mins 48x
No problem with either, burnt at the maximum 24x HD burn speed.
My only gripe with HD burn is that it does not allow any overburning. Not a bit over the 1400Meg limit. not a big problem, though.
Also, be cautious on WHAT you burn. CD are not a very good archival method. They can degrade quite fast and i would bet that HD-burn, being more precise, is more sensitive to those degradations too.

I was able copy the hardrive of my old macbook from "My Passport" onto the desktop on an older iMac. but i dont know how to make my hardrive and user name be the main one since someone had used it in the past and had their info on the comp. please help!

I recently broke my 2008 macbook. i was able to use an external hardrive to back up my data onto My Passport. I was going to buy a new computer but a friend told me sher had an older version of the iMac. (not sure how old but it doesnt have a camera if that helps) i was able to hook it up and turn it on but i ran into a few problems. 1) the "authentic" user or whatever it says is someone who previously used the computer. i added me as a user but im not sure how to make me the main user. 2) after hooking up My Passport, i was able to drag my files and copy them to the desktop.(i think i did it correctly) now, i dont know how to make my hard drive and applications and iformation the "main " info. The current apps on the iMac are super old versions of iTunes and iPhoto and such. 3) while trying to open the apps from my macbook on the iMac, it said it didnt have the right software to open these apps.
I am so computer illiterate so someone please help!!! Also, i do not have internet in my new apartment yet so if there is a way to make this happen without using the internet that would be preferred. sorry for the horrible spelling and poorly written paragraph.
THANK YOU!!

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to make downloadable links in Adobe Muse

I am new to website design and am trying to figure out how to make downloadable links for some PDF flyers, PSD templates I am creating. Not sure if "downloadable links" is the correct term for what I'm trying to say but in a nutshell I am creating Business Flyer's in PDF form and Photoshop PSD template files that I would like to be able to have my users click a link that allows them to download them right to their desktop. Any help would really be appreciated!

Hi caybar10gaming,
I had the same question as you and was searching online for how to add "downloadable links" as well so your not alone in that lol. Anyways, I found this video that explains how to do this. I hope this helps you, as it did me. Good Luck
http://tv.adobe.com/watch/muse-feature-tour/add-and-link-to-any-type-of-file/
-Caitlin

I cannot figure out how to make the text larger on an incoming email. The finger method doesn't work and I cannot find any toolbar with which to do it. I could find nothing in settings also. Plese help and thank you.

I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.

Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John.

How to make numbers in message text input fields left aligned?

Hi Friends
I have completed one of my task .but getting result right side of the field.
how to make numbers in message text input fields left aligned?
Thanks
Aravinda

Hi ,
Sorry for late replay i am trying this alos not set that page....
pageContext.forwardImmediatelyToCurrentPage(null, true, null);
and one more that kff field working is fine for ex display any text pled displayed properly and only problem is not set the value and HrSitKeyFlex6 and HrSitKeyFlex7 fields are perfectly get the values but not pront HrSitKeyFlex8 that only my issue....
Regards,
Srini

How to make a JPanel selectable

When extending a JPanel and overriding the paintComponent() method the custom JPanel can not be selected so that it gets for example KeyEvents.
But if I make the new Class extend a JButton it gets of course selected and able to receive for example KeyEvents.
My question is therefore; what does the JButton implement that a JPanel doesn’t so that a JButton gets selectable? Or in other words; how to make a JPanel selectable?
Aleksander.

Try this extended code. Only the first panel added can get the Focus.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Test extends JFrame
public Test()
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel panel1 = new JPanel(new BorderLayout());
    JPanel panel2 = new JPanel(new BorderLayout());
    ImagePanel imgPanel = new ImagePanel();
    panel1.setFocusable(true);
    panel2.setFocusable(true);
    panel1.setPreferredSize(new Dimension(0, 50));
    panel2.setPreferredSize(new Dimension(0, 50));
    panel1.setBorder(BorderFactory.createLineBorder(Color.RED,     4));
    panel2.setBorder(BorderFactory.createLineBorder(Color.CYAN,    4));
    imgPanel.setBorder(BorderFactory.createLineBorder(Color.BLACK, 4));
    panel1.add(new JLabel("Panel 1"), BorderLayout.CENTER);
    panel2.add(new JLabel("Panel 2"), BorderLayout.CENTER);
    getContentPane().add(panel1, BorderLayout.NORTH);
    getContentPane().add(panel2, BorderLayout.SOUTH);
    getContentPane().add(imgPanel, BorderLayout.CENTER);
    pack();
    panel1.addKeyListener(new KeyAdapter(){
        public void keyPressed(KeyEvent ke){
            System.out.println("Panel1");}});
    panel2.addKeyListener(new KeyAdapter(){
        public void keyPressed(KeyEvent ke){
            System.out.println("Panel2");}});
public static void main(String[] args){new Test().setVisible(true);}
class ImagePanel extends JPanel
Image img;
public ImagePanel()
    setFocusable(true);
    setPreferredSize(new Dimension(400,300));
    try{img = javax.imageio.ImageIO.read(new java.net.URL(getClass().getResource("Test.gif"), "Test.gif"));}
    catch(Exception e){/*handled in paintComponent()*/}
    addKeyListener(new KeyAdapter(){
      public void keyPressed(KeyEvent ke){
        System.out.println("ImagePanel");}});
public void paintComponent(Graphics g)
    if(img != null)
      g.drawImage(img, 0,0,this.getWidth(),this.getHeight(),this);
    else
      g.drawString("This space for rent",50,50);
}

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

How to make an icon image using Photoshop

I found out how to do this recently so I decided that I wanted to make a tut for those who don't know how to make an icon image. This icon image is for the libraries tab on your computer. Under the libararies tab there is Music, Pictures, Documents, and Photos
First you will need the ICO (Icon image format) Format extension for photoshop which can be downloaded here:
http://www.telegraphics.com.au/svn/icoformat/trunk/dist/README.html
The download link and tutorial on how to install it is all in the link above.
Once you have that all set you can now launch photoshop to create your icon image. Once you have launched it, create a new document with the size as in the image below.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/256x256_zpsbf3dcf8e.png~original[/IMG]
Create the image you want. I used a simple one by using the custom shape tool by pressing "U" on your keyboard and with the
basic blending options.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/IconImage_zpsd788c709.png~original[/IMG]
The reason why the image is pixelated is because it is an icon image. Since the image is only 256x256 pixels when you zoom in on it that will get you the pixely result. The reason why I zoomed in is so you can see it. But don't worry this is no the end result. Just continue reading and you will see.
So once you have created the icon go ahead and press
file>save as>(under format choose the ICO)>and choose the name that you want to name it. And save it in your C: drive. You will see why to save it in your C: drive in a sec.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/SampleicoPic_zpsd252bfba.png~original[/IMG]
So now that you have created the icon and saved it now you can create the new library.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/NewLibrary_zps8ca703b2.png~original[/IMG]
Name the library whatever you want I named it "Sample" for tutorial purposes. Notice how it gives you a default boring icon image for your library.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Sample1_zpsb5472840.png~original[/IMG]
So now once you have created and named your library now it is time to get the icon image into place.
Go to computer/c: Drive/users/YOU/ And now once you have reached this area you will need to access a hidden folder named "appdata" to do so press "Alt" then a menu bar will show. Click
tools>folder options>and view. Find the option to view hidden folders then press apply then ok. Now we shall continue so AppData>Roaming>Microsoft>Windows>Libraries
Now you should see all the libraries including the one you just created.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/showhiddenfolder_zpsad4a3c94.png~orig inal[/IMG]
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Libraries_zpsf6243bc0.png~original[/IMG]
Once you have reached your destination then open a new text document with notepad and drag the library you just created in notepad. The result should look like this:
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Notepad_zps251a86f0.png~original[/IMG]
once you have reached this point click at the end of the second to last line down then press enter and enter in this information
<iconReference>c:\"NAME OF ICO FILE YOU CREATED IN PS".ico</iconReference>
Example:
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/iconreference_zps1c1a3eca.png~origina l[/IMG]
Once you have entered that information go to file>save and the icon image should appear on the library you created.
[IMG]http://i1297.photobucket.com/albums/ag25/dusty951512/Finished_zps267f893a.png~original[/IMG]
Now you are officially finished. Go and spread the news and joy. Bye for now
-Dusty951512

It is Windows only because all those screen shots are exclusively Windows, the file structure and paths do not resemble those of the Mac in the least. As a Mac user, there's nothing I could take from your tutorial. Sorry,
No drives named with letters like C: on the Mac, for instance. No backward slashes either, ever. No such paths either. No "Notepad" on the Mac, we use TextEdit; but such a text editor is not remotely needed on the Mac to make and/or edit icons. Etc.
Those folders are not even called "Libraries" on the Mac… Nothing resembling your tutorial at all.
The icons in the Finder's Sidebar are not customizable at all in recent version of OS X.
= = =
You can edit any post of yours only until someone replies to it. At this time your post is not editable by you any longer.

How to make text start at the top of a page in livecycle 9

Hi, How can I get the text in a large text field to start at the top left of the field rather than at the center of the field? In addition, may one know how to make text wrap in the form as well?
Thanks,
David

To set the Text alignment properties use "Paragraph" pallet you can make it visible by selecting Window>>Paragraph or Shift+F5
And to allow text wrapping you need to select "Allow Multiple Lines" checkbox under "Object" pallet and "Field" tab. You can make Object pallet visible by selecting Window>>Object or Shift+F7.
Good Luck,

How to make arrays or repeat objects in circle?

Hello,
1 - How to make arrays without copying and pasting? Fig-1
2 - how to create objects repeated in circles? Fig-2
Regards and Thanks

1) Patterns
2) One option is Scripting (or Actions).
http://forums.adobe.com/message/3472806#3472806
Edit: That was only for text layers, you could give this a try:
// xonverts to smart object, copies and rotates a layer;
// for photoshop cs5 on mac;
// 2011; use it at your own risk;
#target photoshop
////// filter for checking if entry is numeric and positive, thanks to xbytor //////
posNumberKeystrokeFilter = function() {
          this.text = this.text.replace(",", ".");
          this.text = this.text.replace("-", "");
          if (this.text.match(/[^\-\.\d]/)) {
                    this.text = this.text.replace(/[^\-\.\d]/g, '');
posNumberKeystrokeFilter2 = function() {
          this.text = this.text.replace(",", "");
          this.text = this.text.replace("-", "");
          this.text = this.text.replace(".", "");
          if (this.text.match(/[^\-\.\d]/)) {
                    this.text = this.text.replace(/[^\-\.\d]/g, '');
          if (this.text == "") {this.text = "2"}
          if (this.text == "1") {this.text = "2"}
var theCheck = photoshopCheck();
if (theCheck == true) {
// do the operations;
var myDocument = app.activeDocument;
var myResolution = myDocument.resolution;
var originalUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
var dlg = new Window('dialog', "set circle-radius for arrangement", [500,300,840,450]);
// field for radius;
dlg.radius = dlg.add('panel', [15,17,162,67], 'inner radius');
dlg.radius.number = dlg.radius.add('edittext', [12,12,60,32], "30", {multiline:false});
dlg.radius.numberText = dlg.radius.add('statictext', [65,14,320,32], "mm radius ", {multiline:false});
dlg.radius.number.onChange = posNumberKeystrokeFilter;
dlg.radius.number.active = true;
// field for number;
dlg.number = dlg.add('panel', [172,17,325,67], 'number of copies');
dlg.number.value = dlg.number.add('edittext', [12,12,60,32], "30", {multiline:false});
dlg.number.value.onChange = posNumberKeystrokeFilter2;
dlg.number.value.text = "12";
// buttons for ok, and cancel;
dlg.buttons = dlg.add('panel', [15,80,325,130], '');
dlg.buttons.buildBtn = dlg.buttons.add('button', [13,13,145,35], 'OK', {name:'ok'});
dlg.buttons.cancelBtn = dlg.buttons.add('button', [155,13,290,35], 'Cancel', {name:'cancel'});
// show the dialog;
dlg.center();
var myReturn = dlg.show ();
if (myReturn == true) {
// the layer;
          var theLayer = smartify(myDocument.activeLayer);
          app.togglePalettes();
// get layer;
          var theName = myDocument.activeLayer.name;
          var theBounds = theLayer.bounds;
          var theWidth = theBounds[2] - theBounds[0];
          var theHeight = theBounds[3] - theBounds[1];
          var theOriginal = myDocument.activeLayer;
          var theHorCenter = (theBounds[0] + ((theBounds[2] - theBounds[0])/2));
          var theVerCenter = (theBounds[1] + ((theBounds[3] - theBounds[1])/2));
// create layerset;
          var myLayerSet = myDocument.layerSets.add();
          theOriginal.visible = false;
          myLayerSet.name = theName + "_rotation";
// create copies;
          var theNumber = dlg.number.value.text;
          var theLayers = new Array;
          for (var o = 0; o < theNumber; o++) {
                    var theCopy = theLayer.duplicate(myLayerSet, ElementPlacement.PLACEATBEGINNING);
                    theLayers.push(theCopy);
// calculate the radius in pixels;
          var theRadius = Number(dlg.radius.number.text) / 10 * myResolution / 2.54;
          myDocument.selection.deselect();
// get the angle;
          theAngle = 360 / theNumber;
// work through the layers;
          for (var d = 0; d < theNumber; d++) {
                    var thisAngle = theAngle * d ;
                    var theLayer = theLayers[d];
// determine the offset for outer or inner radius;
                    var theMeasure = theRadius + theHeight/2;
//                    var theMeasure = theRadius + theWidth/2;
                    var theHorTarget = Math.cos(radiansOf(thisAngle)) * theMeasure;
                    var theVerTarget = Math.sin(radiansOf(thisAngle)) * theMeasure;
// do the transformations;
                    rotateAndMove(myDocument, theLayer, thisAngle + 90, - theHorCenter + theHorTarget + (myDocument.width / 2), - theVerCenter + theVerTarget + (myDocument.height / 2));
// reset;
app.preferences.rulerUnits = originalUnits;
app.togglePalettes()
////// function to determine if open document is eligible for operations //////
function photoshopCheck () {
var checksOut = true;
if (app.documents.length == 0) {
          alert ("no open document");
          checksOut = false
else {
          if (app.activeDocument.activeLayer.isBackgroundLayer == true) {
                    alert ("please select a non background layer");
                    checksOut = false
          else {}
return checksOut
////// function to smartify if not //////
function smartify (theLayer) {
// make layers smart objects if they are not already;
          if (theLayer.kind != LayerKind.SMARTOBJECT) {
                    myDocument.activeLayer = theLayer;
                    var id557 = charIDToTypeID( "slct" );
                    var desc108 = new ActionDescriptor();
                    var id558 = charIDToTypeID( "null" );
                    var ref77 = new ActionReference();
                    var id559 = charIDToTypeID( "Mn " );
                    var id560 = charIDToTypeID( "MnIt" );
                    var id561 = stringIDToTypeID( "newPlacedLayer" );
                    ref77.putEnumerated( id559, id560, id561 );
                    desc108.putReference( id558, ref77 );
                    executeAction( id557, desc108, DialogModes.NO );
                    return myDocument.activeLayer
          else {return theLayer}
////// radians //////
function radiansOf (theAngle) {
          return theAngle * Math.PI / 180
////// rotate and move //////
function rotateAndMove (myDocument, theLayer, thisAngle, horizontalOffset, verticalOffset) {
// do the transformations;
myDocument.activeLayer = theLayer;
// =======================================================
var idTrnf = charIDToTypeID( "Trnf" );
    var desc3 = new ActionDescriptor();
    var idFTcs = charIDToTypeID( "FTcs" );
    var idQCSt = charIDToTypeID( "QCSt" );
    var idQcsa = charIDToTypeID( "Qcsa" );
    desc3.putEnumerated( idFTcs, idQCSt, idQcsa );
    var idOfst = charIDToTypeID( "Ofst" );
        var desc4 = new ActionDescriptor();
        var idHrzn = charIDToTypeID( "Hrzn" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc4.putUnitDouble( idHrzn, idPxl, horizontalOffset );
        var idVrtc = charIDToTypeID( "Vrtc" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc4.putUnitDouble( idVrtc, idPxl, verticalOffset );
    var idOfst = charIDToTypeID( "Ofst" );
    desc3.putObject( idOfst, idOfst, desc4 );
    var idAngl = charIDToTypeID( "Angl" );
    var idAng = charIDToTypeID( "#Ang" );
    desc3.putUnitDouble( idAngl, idAng, Number(thisAngle) );
executeAction( idTrnf, desc3, DialogModes.NO );

In firefox 4 RC, some addons installed suddenly disappear, but checking the profile, some of the missing addons related files are still here, how to make the addons back?

I use firefox 4 form beta 9 to RC (zh) now and there are also firefox 3.6 installed in computer. One day when I open Fx 4 RC, some (actually a lot but not all) of the adoons just disappear. When I check on about:addons page, some addons installed do not appear in the list.
The addons '''REMAINED''' including:
* addons I already used in Fx 3.6 (like webmail notifie , xmarks)
* ''addons only can use in Fx 4'' (like Open Web Apps for Firefox).
The addons '''DISAPPEARED''' including:
* addons I already used in Fx 3.6 (like yoono)
* '' addons installed when using Fx 4'' (like updatescanner, Thumbnail Zoom).
But when I check the profile(by Help > Troubleshooting Information>Open Containing Folder) , some (not sure is it all) of the missing addons related files are still here [lucky], so any one know how to make the missing addons back?
Some more details:
* This happened when i use RC for already a few days and keep on even i restart Fx and windows.
* The bookmarks, history, search engine and even themes and icon setting are still here. [ I only sync bookmarks but not history for both xmarks and firefox sync.]
* This addons are really '''disappeared''' but not disable only!
* This number of addons missed, as i remember, at least 30, should be more than that number bacause some of them are installed but in disable mode.
* I try to install back one of the addons - Stylish, the installed code are still here.
* It is nearly an impossible mission to install every missing addons again, as it really kill my time.

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar to do a compatibility check.

My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to make a precise 0 to 60Hz vco in fpga?

Similar Messages

Maybe you are looking for